Improving Photovoltaics with High Luminescence Efficiency Quantum Dot Layers

A solar cell relies on its ability to turn photons into current. Because short wavelength photons are typically absorbed near the top surface of a cell, the generated charge carriers recombine before being collected. But when a layer of quantum dots (nanoscale semiconductor particles) is placed on top of the cell, it absorbs short wavelength photons and emits them into the cell at longer wavelengths, which enables more efficient carrier collection. However, the resulting power conversion efficiency of the system depends critically on the quantum dot luminescence efficiency – the nature of this relationship was previously unknown. Our calculations suggest that a quantum dot layer must have high luminescence efficiency (at least 80%) to improve the current output of existing photovoltaic (PV) cells; otherwise, it may worsen the cell’s efficiency. Our quantum dot layer (using quantum dots with over 85% quantum yield) slightly reduced the efficiency of our PV cells. We observed a decrease in short circuit current of a commercial-grade cell from 0.1977 A to 0.1826 A, a 7.6% drop, suggesting that improved optical coupling from the quantum dot emission into the solar cell is needed. With better optical coupling, we predict current enhancements between ~6% and ~8% for a solar cell that already has an antireflection coating. Such improvements could have important commercial impacts if the coating could be deployed in a scalable fashion.

Review of methods to predict solder joint reliability under thermo-mechanical cycling

Solder joints are often the cause of failure in electronic devices, failing due to cyclic creep induced ductile fatigue. This paper will review the modelling methods available to predict the lifetime of SnPb and SnAgCu solder joints under thermo-mechanical cycling conditions such as power cycling, accelerated thermal cycling and isothermal testing, the methods do not apply to other damage mechanisms such as vibration or drop-testing. Analytical methods such as recommended by the IPC are covered, which are simple to use but limited in capability. Finite element modelling methods are reviewed, along with the necessary constitutive laws and fatigue laws for solder, these offer the most accurate predictions at the current time. Research on state-of-the-art damage mechanics methods is also presented, although these have not undergone enough experimental validation to be recommended at present

Magnetic damping of levitated liquid droplets in AC and DC field

The intense AC magnetic field required to produce levitation in terrestrial conditions, along with the buoyancy and thermo-capillary forces, results in turbulent convective flow within the droplet. The use of a homogenous DC magnetic field allows the convective flow to be damped. However the turbulence properties are affected at the same time, leading to a possibility that the effective turbulent damping is considerably reduced. The MHD modified K-Omega turbulence model allows the investigation of the effect of magnetic field on the turbulence. The model incorporates free surface deformation, the temperature dependent surface tension, turbulent momentum transport, electromagnetic and gravity forces. The model is adapted to incorporate a periodic laser heating at the top of the droplet, which have been used to measure the thermal conductivity of the material by calculating the phase lag between the frequency of the laser heating and the temperature response at the bottom. The numerical simulations show that with the gradual increase of the DC field the fluid flow within the droplet is initially increasing in intensity. Only after a certain threshold magnitude of the field the flow intensity starts to decrease. In order to achieve the flow conditions close to the ‘laminar’ a D.C. magnetic field >4 Tesla is required to measure the thermal conductivity accurately. The reduction in the AC field driven flow in the main body of the drop leads to a noticeable thermo-capillary convection at the edge of the droplet. The uniform vertical DC magnetic field does not stop a translational oscillation of the droplet along the field, which is caused by the variation in total levitation force due to the time-dependent surface deformation.

Thixotropic studies of lead-based solder, lead-free solder and conductive adhesive pastes

The stencil printing process is an important process in the assembly of Surface Mount Technology (SMT)devices. There is a wide agreement in the industry that the paste printing process accounts for the majority of assembly defects. Experience with this process has shown that typically over 60% of all soldering defects are due to problems associated with the flow properties of solder pastes. Therefore, the rheological measurements can be used as a tool to study the deformation or flow experienced by the pastes during the stencil printing process. This paper presents results on the thixotropic behaviour of three pastes; lead-based solder paste, lead-free solder paste and isotropic conductive adhesive (ICA). These materials are widely used as interconnect medium in the electronics industry. Solder paste are metal alloys suspended in a flux medium while the ICAs consist of silver flakes dispersed in an epoxy resin. The thixotropy behaviour was investigated through two rheological test; (i) hysteresis loop test and (ii) steady shear rate test. In the hysteresis loop test, the shear rate were increased from 0.001 to 100s-1 and then decreased from 100 to 0.001s-1. Meanwhile, in the steady shear rate test, the materials were subjected to a constant shear rate of 0.100, 100 and 0.001s-1 for a period of 240 seconds. All the pastes showed a high degree of shear thinning behaviour with time. This might be due to the agglomeration of particles in the flux or epoxy resin that prohibits pastes flow under low shear rate. The action of high shear rate would break the agglomerates into smaller pieces which facilitates the flow of pastes, thus viscosity is reduced at high shear rate. The solder pastes exhibited a higher degree of structural breakdown compared to the ICAs. The area between the up curve and down curve in the hysteresis curve is an indication of the thixotropic behavior of the pastes. Among the three pastes, lead-free solder paste showed the largest area between the down curve and up curve, which indicating a larger structural breakdown in the pastes, followed by lead-based solder paste and ICA. In a steady shear rate test, viscosity of ICA showed the best recovery with the steeper curve to its original viscosity after the removal of shear, which indicating that the dispersion quality in ICA is good because the high shear has little effect on the microstructure of ICA. In contrast, lead-based paste showed the poorest recovery which means this paste undergo larger structural breakdown and dispersion quality in this paste is poor because the microstructure of the paste is easily disrupted by high shear. The structural breakdown during the application of shear and the recovery after removal of shear is an important characteristic in the paste printing process. If the paste’s viscosity can drop low enough, it may contribute to the aperture filling and quick recovery may prevent slumping.

Interprofessional attitudes amongst undergraduate students in the health professions: a longitudinal questionnaire survey

Background: Interprofessional education (IPE) introduced at the beginning of pre-registration training for healthcare professionals attempts to prevent the formation of negative interprofessional attitudes which may hamper future interprofessional collaboration. However, the potential for IPE depends, to some extent, on the readiness of healthcare students to learn together. Objectives: To measure changes in readiness for interprofessional learning, professional identification, and amount of contact between students of different professional groups; and to examine the influence of professional group, student characteristics and an IPE course on these scores over time. Design: Annual longitudinal panel questionnaire survey at four time-points of pre-registration students (n = 1683) drawn from eight healthcare groups from three higher education institutions (HEIs) in the UK. Results: The strength of professional identity in all professional groups was high on entry to university but it declined significantly over time for some disciplines. Similarly students’ readiness for interprofessional learning was high at entry but declined significantly over time for all groups, with the exception of nursing students. A small but significant positive relationship between professional identity and readiness for interprofessional learning was maintained over time. There was very minimal contact between students from different disciplines during their professional education programme. Students who reported gaining the least from an IPE course suffered the most dramatic drop in their readiness for interprofessional learning in the following and subsequent years; however, these students also had the lowest expectations of an IPE course on entry to their programme of study. Conclusion: The findings provide support for introducing IPE at the start of the healthcare students’ professional education to capitalise on students’ readiness for interprofessional learning and professional identities, which appear to be well formed from the start. However, this study suggests that students who enter with negative attitudes towards interprofessional learning may gain the least from IPE courses and that an unrewarding experience of such courses may further reinforce their negative attitudes.

Simulation of mackerel (Scomber scombrus) recruitment with an individual-based model and comparison with field data

An individual-based model (IBM) for the simulation of year-to-year survival during the early life-history stages of the north-east Atlantic stock of mackerel (Scomber scombrus) was developed within the EU funded Shelf-Edge Advection, Mortality and Recruitment (SEAMAR) programme. The IBM included transport, growth and survival and was used to track the passive movement of mackerel eggs, larvae and post-larvae and determine their distribution and abundance after approximately 2 months of drift. One of the main outputs from the IBM, namely distributions and numbers of surviving post-larvae, are compared with field data as recruit (age-0/age-1 juveniles) distribution and abundance for the years 1998, 1999 and 2000. The juvenile distributions show more inter-annual and spatial variability than the modelled distributions of survivors; this may be due to the restriction of using the same initial egg distribution for all 3 yr of simulation. The IBM simulations indicate two main recruitment areas for the north-east Atlantic stock of mackerel, these being Porcupine Bank and the south-eastern Bay of Biscay. These areas correspond to areas of high juvenile catches, although the juveniles generally have a more widespread distribution than the model simulations. The best agreement between modelled data and field data for distribution (juveniles and model survivors) is for the year 1998. The juvenile catches in different representative nursery areas are totalled to give a field abundance index (FAI). This index is compared with a model survivor index (MSI) which is calculated from the total of survivors for the whole spawning season. The MSI compares favourably with the FAI for 1998 and 1999 but not for 2000; in this year, juvenile catches dropped sharply compared with the previous years but there was no equivalent drop in modelled survivors.

Structure of phytoplankton (Continuous Plankton Recorder and SeaWiFS) and impact of climate in the Northwest Atlantic Shelves

All marine organisms are affected to some extent by the movement and thermal properties of oceanic currents. However phytoplankton, because of its small size is most directly coupled to the physical environment. The intense hydrodynamic activity observed in the Northwest Atlantic Shelves Province makes this region especially intriguing from the point of view of physical-biological interactions. In the present work, remote sensed data of Sea Surface Height (SSH) anomalies, Sea-surface chlorophyll a concentrations (SeaWiFS), and Sea Surface Temperature (SST) are used to complement the Continuous Plankton Recorder (CPR) survey that continuously sampled a route between Norfolk (Virginia, USA; 39° N, 71° W) and Argentia (Newfoundland; 47° N, 54° W) over the period 1995–1998. Over this period, we examined physical structures (i.e. SST and SSH) and climatic forcing associated with space-time phytoplankton structure. Along this route, the phytoplankton structures were mainly impacted by the changes in surface flow along the Scotian Shelf rather than significantly influenced by the mesoscale features of the Gulf Stream. These changes in water mass circulation caused a drop in temperature and salinity along the Scotian Shelf that induced changes in phytoplankton and zooplankton abundance.

Changes in pH at the exterior surface of plankton with ocean acidification

Anthropogenically released CO2 is dissolving in the ocean, causing a decrease in bulk-seawater pH (ocean acidification). Projections indicate that the pH will drop 0.3 units from its present value by 2100 (ref. 1). However, it is unclear how the growth of plankton is likely to respond. Using simulations we demonstrate how pH and carbonate chemistry at the exterior surface of marine organisms deviates increasingly from those of the bulk sea water as organism metabolic activity and size increases. These deviations will increase in the future as the buffering capacity of sea water decreases with decreased pH and as metabolic activity increases with raised seawater temperatures. We show that many marine plankton will experience pH conditions completely outside their recent historical range. However, ocean acidification is likely to have differing impacts on plankton physiology as taxon-specific differences in organism size, metabolic activity and growth rates during blooms result in very different microenvironments around the organism. This is an important consideration for future studies in ocean acidification as the carbonate chemistry experienced by most planktonic organisms will probably be considerably different from that measured in bulk-seawater samples. An understanding of these deviations will assist interpretation of the impacts of ocean acidification on plankton of different size and metabolic activity.

Long-term declining trend of zooplankton biomass in the Tropical Atlantic

We report evidences that the zooplankton biomass in the tropical Atlantic has declined with an almost 10-fold drop from the 1950s to 2000. The results of the multiple regression analysis showed that the decline in zooplankton biomass was positively related to the NAO-index and to phosphate concentration. We also found that the depth of the thermocline has decreased over the period of our investigation. Thus, the decline we report in zooplankton biomass may be related to the combined effect of two phenomena driven by global temperature increase: (1) the widening of the distributional range of tropical species due to the expansion of the ‘tropical belt’ and (2) a decrease in primary production resulting from the thinning of the thermocline. The decline of zooplankton biomass we report suggests that global warming of the ocean may be altering tropical food webs, and through them, it may also indirectly impact tropical oceans biogeochemical cycles.

Fishery Exploitation and Stock Assessment of the Endangered Nassau Grouper, Epinephelus Striatus (Actinopterygii: Perciformes: Serranidae), in the Turks and Caicos Islands

The Nassau grouper, Epinephelus striatus (Bloch, 1792), is an endangered species that has been historically overexploited in numerous fisheries throughout its range in the Caribbean and tropical West Atlantic. Data relating fishery exploitation levels to stock abundance of the species are deficient, and protective regulations for the Nassau grouper are yet to be implemented in the Turks and Caicos Islands (TCI). The goal of this study was to conduct a stock assessment and evaluate the exploitation status of the Nassau grouper in the TCI. Materials and methods. Calibrated length cohort analysis was applied to published fisheries data on Nassau grouper landings in the TCI. The total lengths of Nassau groupers among the catches of spearfishers, lobster trappers, and deep sea fishers on the island of South Caicos during 2006 and 2008 were used with estimates of growth, natural mortality, and total annual landings to derive exploitation benchmarks. Results. The TCI stock experienced low to moderate fishing mortality (0.28, 0.18) and exploitation rates (0.49, 0.38) during the period of the study (2006, 2008). However, 21.2%-64.4% of all landings were reproductively immature. Spearfishing appeared to contribute most to fishing mortality relative to the use of lobster traps or hydraulic reels along bank drop-offs. Conclusion. In comparison with available fisheries data for the wider Caribbean, the results reveal the TCI as one of the remaining sites, in addition to the Bahamas, with a substantial Nassau grouper stock. In light of increasing development and tourism in the TCI, continued monitoring is essential to maintain sustainable harvesting practices.

Sediment contaminant surveillance in Milford Haven Waterway

Sediment contaminants were monitored in Milford Haven Waterway (MHW) since 1978 (hydrocarbons) and 1982 (metals), with the aim of providing surveillance of environmental quality in one of the UK’s busiest oil and gas ports. This aim is particularly important during and after large-scale investment in liquefied natural gas (LNG) facilities. However, methods inevitably have changed over the years, compounding the difficulties of coordinating sampling and analytical programmes. After a review by the MHW Environmental Surveillance Group (MHWESG), sediment hydrocarbon chemistry was investigated in detail in 2010. Natural Resources Wales (NRW) contributed their MHW data for 2007 and 2012, collected to assess the condition of the Special Area of Conservation (SAC) designated under the European Union Habitats Directive. Datasets during 2007-2012 have thus been more comparable. The results showed conclusively that a MHW-wide peak in concentrations of sediment polycyclic aromatic hydrocarbons (PAHs), metals and other contaminants occurred in late 2007. This was corroborated by independent annual monitoring at one centrally-located station with peaks in early 2008 and 2011. The spatial and temporal patterns of recovery from the 2007 peak, shown by MHW-wide surveys in 2010 and 2012, indicate several probable causes of contaminant trends, as follows: atmospheric deposition, catchment runoff, sediment resuspension from dredging, and construction of two LNG terminals and a power station. Adverse biological effects predictable in 2007 using international sediment quality guidelines, were independently tested by data from monitoring schemes of more than a decade duration in MHW (starfish, limpets), and in the wider SAC (grey seals). Although not proving cause and effect, many of these potential biological receptors showed a simultaneous negative response to the elevated 2007 contamination following intense dredging activity in 2006. Wetland bird counts were typically at a peak in the winter of 2005-2006 previous to peak dredging. In the following winter 2006-2007, shelduck in Pembroke River showed their lowest winter count, and spring 2007 was the largest ever drop in numbers of broods across MHW between successive breeding seasons. Wigeon counts in Pembroke River were again low in late 2012 after further dredging nearby. These results are strongly supported by PAH data reported previously from invertebrate bioaccumulation studies in MHW 2007-2010, themselves closely reflecting sediment

Andrew Marvell's Latin Poetry: From Text to Context (356pp.)

David Norbrook, Review of English Studies 56 (Sept. 2005), 675-6.
‘We have waited a long time for a study of Marvell’s Latin poetry; fortunately, Estelle Haan’s monograph generously makes good the loss ... One of her most intriguing suggestions … is that Marvell may have presented paired poems like ‘Ros’ and ‘On a Drop of Dew’, and the poems to the obligingly named Dr Witty, to his student Maria Fairfax as his own patterns for the pedagogical practice of double translation. Perhaps the most original parts of the book, however, move beyond the familiar canon to cover the generic range of the Latin verse. Haan offers a very full contextualization of the early Horatian Ode to Charles I in seventeenth-century exercises in parodia. In a rewarding reading of the poem to Dr Ingelo she shows how Marvell deploys the language of Ovid’s Tristia to present Sweden as a place of shivering exile, only to subvert this model with a neo-Virgilian celebration of Christina as a virtuous, city-building Dido. She draws extensively on historical as well as literary sources to offer very detailed contextualizations of the poem to Maniban and ‘Scaevola Scotto-Britannus’... This monograph opens up many new ways into the Latin verse, not least because it is rounded off with new texts and prose translations of the Latin poems. These make a substantial contribution in their own right. They are the best and most accurate translations to date (those in Smith’s edition having some lapses); they avoid poeticisms but bring out the structure of the poems' wordplay very clearly. This book brings us a lot closer to seeing Marvell whole.'

A note on the prediction of liquid hold-up with the stratified roll wave regime for gas/liquidco-current flow in horizontal pipes.

This note presents a simple model for prediction of liquid hold-up in two-phase horizontal pipe flow for the stratified roll wave (St+RW) flow regime. Liquid hold-up data for horizontal two-phase pipe flow [1, 2, 3, 4, 5 and 6] exhibit a steady increase with liquid velocity and a more dramatic fall with increasing gas rate as shown by Hand et al. [7 and 8] for example. In addition the liquid hold-up is reported to show an additional variation with pipe diameter. Generally, if the initial liquid rate for the no-gas flow condition gives a liquid height below the pipe centre line, the flow patterns pass successively through the stratified (St), stratified ripple (St+R), stratified roll wave, film plus droplet (F+D) and finally the annular (A+D, A+RW, A+BTS) regimes as the gas rate is increased. Hand et al. [7 and 8] have given a detailed description of this progression in flow regime development and definitions of the patterns involved. Despite the fact that there are over one hundred models which have been developed to predict liquid hold-up, none have been shown to be universally useful, while only a handful have proven to be applicable to specific flow regimes [9, 10, 11 and 12]. One of the most intractable regimes to predict has been the stratified roll wave pattern where the liquid hold-up shows the most dramatic change with gas flow rate. It has been suggested that the momentum balance-type models, which give both hold-up and pressure drop prediction, can predict universally for all flow regimes but particularly in the case of the difficult stratified roll wave pattern. Donnelly [1] recently demonstrated that the momentum balance models experienced some difficulties in the prediction of this regime. Without going into lengthy details, these models differ in the assumed friction factor or shear stress on the surfaces within the pipe particularly at the liquid–gas interface. The Baker–Jardine model [13] when tested against the 0.0454 m i.d. data of Nguyen [2] exhibited a wide scatter for both liquid hold-up and pressure drop as shown in Fig. 1. The Andritsos–Hanratty model [14] gave better prediction of pressure drop but a wide scatter for liquid hold-up estimation (cf. Fig. 2) when tested against the 0.0935 m i.d. data of Hand [5]. The Spedding–Hand model [15], shown in Fig. 3 against the data of Hand [5], gave improved performance but was still unsatisfactory with the prediction of hold-up for stratified-type flows. The MARS model of Grolman [6] gave better prediction of hold-up (cf. Fig. 4) but deterioration in the estimation of pressure drop when tested against the data of Nguyen [2]. Thus no method is available that will accurately predict liquid hold-up across the whole range of flow patterns but particularly for the stratified plus roll wavy regime. The position is particularly unfortunate since the stratified-type regimes are perhaps the most predominant pattern found in multiphase lines.

The effects of blood pressure lowering on development of cognitive impairment and dementia in patients without apparent prior cerebrovascular disease

BACKGROUND: Hypertension and cognitive impairment are prevalent in older people. It is known that hypertension is a direct risk factor for vascular dementia and recent studies have suggested hypertension also impacts upon prevalence of Alzheimer's disease. The question is therefore whether treatment of hypertension lowers the rate of cognitive decline. OBJECTIVES: To assess the effects of blood pressure lowering treatments for the prevention of dementia and cognitive decline in patients with hypertension but no history of cerebrovascular disease. SEARCH STRATEGY: The trials were identified through a search of CDCIG's Specialised Register, CENTRAL, MEDLINE, EMBASE, PsycINFO and CINAHL on 27 April 2005. SELECTION CRITERIA: Randomized, double-blind, placebo controlled trials in which pharmacological or non-pharmacological interventions to lower blood pressure were given for at least six months. DATA COLLECTION AND ANALYSIS: Two independent reviewers assessed trial quality and extracted data. The following outcomes were assessed: incidence of dementia, cognitive change from baseline, blood pressure level, incidence and severity of side effects and quality of life. MAIN RESULTS: Three trials including 12,091 hypertensive subjects were identified. Average age was 72.8 years. Participants were recruited from industrialised countries. Mean blood pressure at entry across the studies was 170/84 mmHg. All trials instituted a stepped care approach to hypertension treatment, starting with a calcium-channel blocker, a diuretic or an angiotensin receptor blocker. The combined result of the three trials reporting incidence of dementia indicated no significant difference between treatment and placebo (Odds Ratio (OR) = 0.89, 95% CI 0.69, 1.16). Blood pressure reduction resulted in a 11% relative risk reduction of dementia in patients with no prior cerebrovascular disease but this effect was not statistically significant (p = 0.38) and there was considerable heterogeneity between the trials. The combined results from the two trials reporting change in Mini Mental State Examination (MMSE) did not indicate a benefit from treatment (Weighted Mean Difference (WMD) = 0.10, 95% CI -0.03, 0.23). Both systolic and diastolic blood pressure levels were reduced significantly in the two trials assessing this outcome (WMD = -7.53, 95% CI -8.28, -6.77 for systolic blood pressure, WMD = -3.87, 95% CI -4.25, -3.50 for diastolic blood pressure).Two trials reported adverse effects requiring discontinuation of treatment and the combined results indicated a significant benefit from placebo (OR = 1.18, 95% CI 1.06, 1.30). When analysed separately, however, more patients on placebo in SCOPE were likely to discontinue treatment due to side effects; the converse was true in SHEP 1991. Quality of life data could not be analysed in the three studies. There was difficulty with the control group in this review as many of the control subjects received antihypertensive treatment because their blood pressures exceeded pre-set values. In most cases the study became a comparison between the study drug against a usual antihypertensive regimen. AUTHORS' CONCLUSIONS: There was no convincing evidence from the trials identified that blood pressure lowering prevents the development of dementia or cognitive impairment in hypertensive patients with no apparent prior cerebrovascular disease. There were significant problems identified with analysing the data, however, due to the number of patients lost to follow-up and the number of placebo patients given active treatment. This introduced bias. More robust results may be obtained by analysing one year data to reduce differential drop-out or by conducting a meta-analysis using individual patient data.

FES KINASE SIGNALING PROMOTES MAST CELL RECRUITMENT TO TUMOURS

FES protein-tyrosine kinase (PTK) activation downstream of the KIT receptor in mast cells (MC) promotes cell polarization and migration towards the KIT ligand Stem cell factor (SCF). A variety of tumours secrete SCF to promote MC recruitment and release of mediators that enhance tumour vascularization and growth. This study investigates whether FES promotes MC migration via regulation of microtubules (MTs), and if FES is required for MC recruitment to the tumour microenvironment. MT binding assays showed that FES has at least two MT binding sites, which likely contribute to the partial co-localization of FES with MTs in polarized bone marrow-derived mast cells (BMMCs). Live cell imaging revealed a significant defect in chemotaxis of FES-deficient BMMCs towards SCF embedded within an agarose drop, which correlated with less MT organization compared to control cells. To extend these results to a tumour model, mouse mammary carcinoma AC2M2 cells were engrafted under the skin and into the mammary fat pads of immune compromised control (nu/nu) or FES-deficient (nu/nu:fes-/-) mice. A drastic reduction in tumour-associated MCs was observed in FES-deficient mice compared to control in both mammary and skin tissue sections. This correlated with a trend towards reduced tumour volumes in FES-deficient mice. These results implicate FES signaling downstream of KIT, in promoting MT reorganization during cell polarization and for chemotaxis of MCs towards tumour-derived SCF. Thus, FES is a potential therapeutic target to limit recruitment of stromal mast cells or macrophages to solid tumours that enhance tumour progression.