Percepção da experiência de parto e qualidade da interacção mãe-bebé

Dissertação de Mestrado apresentada ao ISPA - Instituto Universitário

Da sobrevivência física à sobrevivência mental : aspectos do funcionamento psíquico em ex-combatentes da guerra colonial portuguesa

Tese de Doutoramento apresentada ao ISPA - Instituto Universitário

A rapid and simple method to detect ESBL in Enterobacter cloacae based on MIC of cefepime

INTRODUCTION: The aim of this study was to identify a rapid and simple phenotypic method for extended-spectrum β-lactamase (ESBL) detection in Enterobacter cloacae. METHODS: A total of 79 consecutive, non-repeated samples of E. cloacae were evaluated. Four phenotypic methods were applied for ESBL detection, results were compared to multiplex polymerase chain reaction (PCR) as the gold standard reference method: 1) ceftazidime and cefotaxime disks with and without clavulanate, both with boronic acid added; 2) disk approximation using cefepime and amoxicillin/clavulanate; 3) ESBL screening by minimum inhibitory concentration (MIC) ≥ 16µg/mL and 4) by MIC ≥ 2µg/mL for cefepime. RESULTS: Method 4 showed the best combination of sensitivity (100%) and specificity (94%). CONCLUSIONS: MIC ≥ 2µg/mL for cefepime would be very useful for the phenotypic detection of ESBL in samples of E. cloacae.

Polymerase chain reaction-based method for the identification of Leishmania (Viannia) braziliensis and Leishmania (Viannia) guyanensis in mucosal tissues conserved in paraffin

ABSTRACTINTRODUCTION: In the Americas, mucosal leishmaniasis is primarily associated with infection by Leishmania (Viannia) braziliensis. However, Leishmania (Viannia) guyanensis is another important cause of this disease in the Brazilian Amazon. In this study, we aimed at detecting Leishmaniadeoxyribonucleic acid (DNA) within paraffin-embedded fragments of mucosal tissues, and characterizing the infecting parasite species.METHODS: We evaluated samples collected from 114 patients treated at a reference center in the Brazilian Amazon by polymerase chain reaction (PCR) and restriction fragment length polymorphism (RFLP) analyses.RESULTS: Direct examination of biopsy imprints detected parasites in 10 of the 114 samples, while evaluation of hematoxylin and eosin-stained slides detected amastigotes in an additional 17 samples. Meanwhile, 31/114 samples (27.2%) were positive for Leishmania spp. kinetoplast deoxyribonucleic acid (kDNA) by PCR analysis. Of these, 17 (54.8%) yielded amplification of the mini-exon PCR target, thereby allowing for PCR-RFLP-based identification. Six of the samples were identified as L. (V.) braziliensis, while the remaining 11 were identified as L. (V.) guyanensis.CONCLUSIONS: The results of this study demonstrate the feasibility of applying molecular techniques for the diagnosis of human parasites within paraffin-embedded tissues. Moreover, our findings confirm that L. (V.) guyanensisis a relevant causative agent of mucosal leishmaniasis in the Brazilian Amazon.

Assessment of schistosomiasis in the semi-arid Northeast region of Brazil: the São Francisco River large-scale water transposition project

Abstract: INTRODUCTION Risk of schistosomiasis expansion to semi-arid northeastern Brazil under the influence of the Integration Project of the São Francisco River (IPSFR) was assessed. METHODS: Stool examinations of schoolchildren, epidemiological investigation, and survey of the local host snail Biomphalaria straminea were performed in five IPSFR municipalities. RESULTS Six of 4,770 examined schoolchildren were egg-positive for Schistosoma mansoni. Biomphalaria straminea was widespread, but not naturally infected with S. mansoni. Snails experimentally exposed to two laboratory S. mansoni strains yielded infection indices of 1-4.5%. CONCLUSIONS: There is evidence of active schistosomiasis transmission in the area; thus, intensive surveillance actions are required.

The use of a modular titanium endoprosthesis in skeletal reconstructions after bone tumor resections: method presentation and analysis of 37 cases

We analyzed 37 patients who underwent segmental wide resection of bone tumors and reconstruction with a modular titanium endoprosthesis at the Orthopaedic Oncology Group, between 1992 and 1998. Twelve patients were male and 25 were female, with a mean age of 30 years (9 - 81). The mean follow-up was 14 months (2 - 48). The diagnoses were: osteosarcoma (14 cases), metastatic carcinoma (10), Ewing's sarcoma (4), giant cell tumor (4), malignant fibrous histiocytoma (3), chondrosarcoma (1), and aneurysmal bone cyst (1). Eleven articulated total knee, 8 partial proximal femur with bipolar acetabulum, 8 partial proximal humerus, 3 total femur, 2 partial proximal tibia, 2 diaphyseal femur, 2 diaphyseal humerus, and 1 total proximal femur with cementless acetabulum endoprosthesis implant procedures were done. The complications related to the procedure included: infection (5 cases), dislocation (3), module loosening (1), and ulnar nerve paresthesia (1). We used the following criteria for the clinical evaluation: presence of pain, range of motion, reconstruction stability, surgical and oncologic complications, and patient acceptance. The results were good in 56.8% of the cases, regular in 32.4% and poor in 10.8%.

Modeling and optimization of extracellular polysaccharides production by Enterobacter A47

Polysaccharides are gaining increasing attention as potential environmental friendly and sustainable building blocks in many fields of the (bio)chemical industry. The microbial production of polysaccharides is envisioned as a promising path, since higher biomass growth rates are possible and therefore higher productivities may be achieved compared to vegetable or animal polysaccharides sources. This Ph.D. thesis focuses on the modeling and optimization of a particular microbial polysaccharide, namely the production of extracellular polysaccharides (EPS) by the bacterial strain Enterobacter A47. Enterobacter A47 was found to be a metabolically versatile organism in terms of its adaptability to complex media, notably capable of achieving high growth rates in media containing glycerol byproduct from the biodiesel industry. However, the industrial implementation of this production process is still hampered due to a largely unoptimized process. Kinetic rates from the bioreactor operation are heavily dependent on operational parameters such as temperature, pH, stirring and aeration rate. The increase of culture broth viscosity is a common feature of this culture and has a major impact on the overall performance. This fact complicates the mathematical modeling of the process, limiting the possibility to understand, control and optimize productivity. In order to tackle this difficulty, data-driven mathematical methodologies such as Artificial Neural Networks can be employed to incorporate additional process data to complement the known mathematical description of the fermentation kinetics. In this Ph.D. thesis, we have adopted such an hybrid modeling framework that enabled the incorporation of temperature, pH and viscosity effects on the fermentation kinetics in order to improve the dynamical modeling and optimization of the process. A model-based optimization method was implemented that enabled to design bioreactor optimal control strategies in the sense of EPS productivity maximization. It is also critical to understand EPS synthesis at the level of the bacterial metabolism, since the production of EPS is a tightly regulated process. Methods of pathway analysis provide a means to unravel the fundamental pathways and their controls in bioprocesses. In the present Ph.D. thesis, a novel methodology called Principal Elementary Mode Analysis (PEMA) was developed and implemented that enabled to identify which cellular fluxes are activated under different conditions of temperature and pH. It is shown that differences in these two parameters affect the chemical composition of EPS, hence they are critical for the regulation of the product synthesis. In future studies, the knowledge provided by PEMA could foster the development of metabolically meaningful control strategies that target the EPS sugar content and oder product quality parameters.

Lag-user method: Using laggards to leverage user innovation

Laggards are the last users to adopt a product. Prior literature on user-led innovation ignores laggards’ impact on innovation. In this paper, we develop the Lag-User Method, through which laggards can generate new ideas. Through six studies with 62 teams in three countries, we apply the method to different technologies and services and present our findings to executives to get managerial insights. Findings reveal that laggards who generate new ideas (lag-users) have different perceptions of user-friendly products and different unfulfilled needs. They prefer simple products. We propose that by involving lag-users in NPD, firms can improve the effectiveness of NPD.

New method for evaluation of cutaneous sensibility in diabetic feet: preliminary report

Diabetic neuropathy is an important complication of the disease, responsible for ulceration and amputation of the foot. Prevention of these problems is difficult mainly because there is no method to correctly access sensibility on the skin of the foot. The introduction of the Pressure-Specified Sensory Device (PSSD TM) in the last decade made possible the measurement of pressure thresholds sensed by the patient, such as touch, both static and in movement, on a continuous scale. This paper is the first in Brazil to report the use of this device to measure cutaneous sensibility in 3 areas of the foot: the hallux pulp, the calcaneus, and the dorsum, which are territories of the tibial and fibular nerves. METHOD: Non-diabetic patients were measured as controls, and 2 groups of diabetic patients - with and without ulcers - were compared. The PSSD TM was used to test the 3 areas described above. The following were evaluated: 1 PS (1-point static), 1 PD (1-point dynamic), 2 PS (2-points static), 2 PD (2-points dynamic). RESULTS: The diabetic group had poorer sensibility compared to controls and diabetics with ulcers had poorer sensibility when compared to diabetics without ulcers. The differences were statistically significant (P <.001). CONCLUSION: Due to the small number of patients compared, the results should be taken as a preliminary report.

Basel III: The impact of new capital requirements on profitability of Portuguese Banks

This empirical study aims to explore the impact of increased capital ratio requirements, on the ROE of the Portuguese banking sector. The paper employs both a quantitative- and qualitative approach, with the qualitative approach as the main method of research. The method adopted to conduct the qualitative research was semi structured elite interviews with banking executives. Higher capital requirements decrease the ROE of banks in Portugal, but huge impairments charges, macroeconomic factors and increased costs of deposits are clearly the dominant reasons for the reduced levels of ROE the past years. Among the measures taken to increase capital ratios, reduction of RWAs and non-core assets have been the main focus, but the issuance of CoCos is regarded as the most expensive measure due to high interest payments. However, the CoCos will not have any effect on the ROE in the long term. It is difficult to draw any conclusions on the impact of more equity in the balance sheet on the ROE of Portuguese banks, as many banks currently don’t generate enough money to pay back on shareholders´ investments.

Elaboração de uma semi-conserva de pescado de água doce "Picles de Peixe". I. Tempo de cura, acidificação, textura e nível de sal

Neste trabalho são estudadas as condições para a correta combinação entre o tempo de cura, acidificação e nível de sal para produzir uma semi-conserva de pescado de de água doce acondicionada em vidro, utilizando o efeito da combinalção sal/ácido. As espécies utilizadas foram jaraqui (Semaprochilodus spp.), Curimatá (Prochilodus nigricans), Dourado (Brachyplastistoma flavicans) e Pirarucu (Arapaima gigas). Na salmora de cura prelimiar o tempo indicado para se obter uma melhor textura foi de 4 semanas, a acidificação até 4,5 foi alcançada na solução contendo 5% de ácido/100 gramas de pescado e o nível adequado de sal foi de 15% (p/v). Na salmora flavorizante a proporção de ácido foi de 1% (v/v) o que torna o produto de sabor agradável, sal na concentração de 2% (p/v) e a adição de 1% de condimentos.

DESENVOLVIMENTO NINFAL DO GAFANHOTO NEOTROPICAL SEMI-AQUÁTICO Stenacris fissicauda fissicauda (BRUNER, 1908) (ORTHOPTERA:ACRIDIDAE) EM CONDIÇÕES CONTROLADAS

Estudou-se a influência da temperatura e do fotoperíodo no desenvolvimento ninfal do gafanhoto semi-aquático Stenacris fissicauda fissicaudaproveniente de uma região de várzea, perto de Manaus. Ninfas recém-eclodidas foram coletadas no campo na macrófita aquática Paspalum repens (Gramineae-Poaceae)e criadas sob condições controladas em câmaras de criação (8, 12 e 24 horas de luz, 27°C e 27/21°C de temperatura) e sob condições naturais. Esta espécie apresenta 5 estádios ninfais para os machos e 6 para as fêmeas sob condições de dia longo no laboratório e durante o período com menos precipitação (estação "seca") sob condições naturais. No entanto, observou-se um estádio extra para machos (6o) e fêmeas (7o) sob condições de dia curto no laboratório. Este estádio ocorreu durante o período com mais precipitação (estação chuvosa) sob condições naturais. Constatou-se que a temperatura e o fotoperíodo interagiram no desenvolvimento ninfal sob condições controladas: 1) O número de estádios (especialmente em fêmeas) foi principalmente influenciado pelo fotoperíodo; 2) O tempo de desenvolvimento ninfal (em ambos os sexos) sobretudo foi influenciado pela temperatura. Os resultados estão sendo discutidos sob o ponto de que a luz pode atuar como fator de controle (ecofator) no número de estádios ninfais de insetos em ecossistemas tropicais, mesmo sendo situados perto do equador, devido à mudanças sazonais de insolação e/ou intensidade de luz durante o ano.

The reasons behind the progression in PISA scores: An education production function approach using semi-parametric techniques

Research Masters

Ontology-based representation and generation of workflows for micro-task human-machine computation

Doctoral Program in Computer Science

A continuous solvent- and oil-free method to prepare injectable PEGylated fibrinogen cell-laden microparticles

Injectable biomaterials with in situ cross-linking reactions have been suggested to minimize the invasiveness associated with most implantation procedures. However, problems related with the rapid liquid-to-gel transition reaction can arise because it is difficult to predict the reliability of the reaction and its end products, as well as to mitigate cytotoxicity to the surrounding tissues. An alternative minimally invasive approach to deliver solid implants in vivo is based on injectable microparticles, which can be processed in vitro with high fidelity and reliability, while showing low cytotoxicity. Their delivery to the defect can be performed by injection through a small diameter syringe needle. We present a new methodology for the continuous, solvent- and oil-free production of photopolymerizable microparticles containing encapsulated human dermal fibroblasts. A precursor solution of cells in photo-reactive PEG-fibrinogen (PF) polymer was transported through a transparent injector exposed to light-irradiation before being atomized in a jet-in-air nozzle. Shear rheometry data provided the cross-linking kinetics of each PF/cell solution, which was then used to determine the amount of irradiation required to partially polymerize the mixture prior to atomization. The partially polymerized drops fell into a gelation bath for further polymerization. The system was capable of producing cell-laden microparticles with high cellular viability, with an average diameter of between 88.1 µm to 347.1 µm and a dispersity of between 1.1 and 2.4, depending on the parameters chosen.