Study of the relative effectiveness of extension methods in educating fisherwomen

Three experimental groups from three different fishing villages were selected and administered with three extension treatments on two messages, namely, production of fish wafers and fish pickles. There was a significant knowledge gain in the subjects taught through different extension methods. It was observed that lecture aided with slides induced maximum knowledge followed by lecture aided with charts and lecture alone. Among all, the young and highly educated women gained maximum knowledge.

Environmental impact of wild shrimp seed collection with non-selective gears on coastal aquatic biodiversity

Collection of wild tiger shrimp (Penaeus monodon) seed with non-selective gears and its impact upon the coastal aquatic biodiversity has been investigated. Loss of undesired species as by-catch was estimated to be 1,075 individuals for collection of every desired shrimp seed which amounted to be 132 billion in a study area stretching 3 km long coastline of the Sagar Island under the Sunderban Biosphere, West Bengal, India. Non-penaeid shrimp seed and crab larvae accounted to be maximally destroyed as their overall contribution towards the by-catch were 56.5% and 29.44%, respectively. Though, rate of bycatch loss was found to be inversely correlated with the rate of shrimp seed collected per gear (r=-0.82, p<0.05) during the peak season (May-September), the overall relationship between them exhibited a linear relationship (r=0.73, p<0.05). By-catch loss for every shrimp seed collection tended to increase up to a daily collection of 2,500 numbers of shrimp seeds per gear followed by a decline. Coastal aquatic community was maximally damaged when the heterogeneity and stability as reflected by different diversity indices were higher.

Monitoring and evaluation of management effectiveness for adaptive management of MPAs in Indonesia's BOBLME area

Subcomponent 3.2 Marine Protected Areas in the conservation of regional fish stocks "Provision of Services Relating to the Assessment and Planning of Effective Management of two MPAs in Sumatra Coast, Indonesia". Assessments of management effectiveness of two Marine Protected Areas (MPAs) in Pulau Pieh National Park and Sabang District, Sumatra, were conducted through two separate workshops. Recommendations were made and future needs identified.

Report of the Training Workshop on MPA Management Effectiveness Assessment Tool, Dhaka, Bangladesh, 27 and 29 April, 2015

Objectives of the workshop included; introduction to various Marine Protected Area (MPA) tools with a focus on Management Effectiveness Assessment Tool (MEAT); report on selected MPAs in Bangladesh; undertake initial assessments using MEAT; and develop workplans for other MPAs

Basic steps in the production of the African catfish seed

A typical production cycle for African catfish farming begins with a selection of fingerlings or juvenile fish of good quality for brood stock development. Fish are selected from a family or grow out stock basing on records of the origin,age, strain and performance history of the parents or from the wild in this brochure, we explain the basic steps and requirements a farmer needs in order to achieve good results in the hatchery.

Strengthening effectiveness of policy directives of the LVFO Council of Ministers on Lake Victoria, Uganda

Research was done to assess the dissemination and implementation by the Fisheries Department, Local Govemments and beach management units and the awareness, acceptance and compliance among fishers to the CoM Directives on management of Lake Victoria fisheries. Conducted by the National Fisheries Resources Research Institute (NaFIRRI), the research focused on the implementation and effectiveness of measures following the LYFO Council of Ministers (CoM) Directives for improved management of the fisheries of Lake Victoria, with particular reference to the 2009 CoM Directives as a case study, it was established that many of the Directives have not been implemented. In cases where the directives were implemented, their effectiveness remains questionable. While steps were taken to disseminate and implement the Directives, there were some challenges, including the unclear legal status of the directives, limited dissemination materials and poor methods of dissemination, language barriers and inadequate resources for enforcement.

The influence of turbine stator well coolant flow rate and passage configuration on cooling effectiveness

Market competitiveness for aero engine power plant dictates that improvements in engine performance and reliability are guaranteed a priori by manufacturers. The requirement to accurately predict the life of engine components makes exacting demands of the internal air system, which must provide effective cooling over the engine duty cycle with the minimum consumption of compressor section air. Tests have been conducted at the University of Sussex using a turbine test facility which comprises a two stage turbine with an individual stage pressure ratio of 1.7:1. Main annulus air is supplied by an adapted Rolls-Royce Dart compressor at up to 440 K and 4.8 kg s-1. Cooling flow rates ranging from 0.71 to 1.46 Cw, ent, a disc entrainment parameter, have been used to allow ingress or egress dominated stator well flow conditions. The mechanical design of the test section allows internal cooling geometry to be rapidly re-configured, allowing the effect of jet momentum and coolant trajectory to be investigated. An important facet to this investigation is the use of CFD to model and analyse the flow structures associated with the cavity conditions tested, as well as to inform the design of cooling path geometry. This paper reports on the effectiveness of stator well coolant flow rate and delivery configurations using experimental data and also CFD analysis to better quantify the effect of stator well flow distribution on component temperatures. Copyright © 2011 by Rolls-Royce plc.

Ventilation effectiveness measures based on heat removal: Part 2. Application to natural ventilation flows

The three effectiveness measures based on the ability of a flow to flush buoyancy from a ventilated space proposed by Coffey and Hunt [Ventilation effectiveness measures based on heat removal-part 1. Definitions. Building and Environment, in press, doi:10.1016/j.buildenv.2006.03.016.] are applied to assess and compare two fundamental natural ventilation flows. We focus on the limiting cases of passive displacement and passive mixing ventilation flows during transient conditions. These transient flows occur when, for example, heat is purged from a building at night. Whilst it is widely recognised that mixing flows are less efficient at purging heat than displacement flows, our results indicate that, when a particular zone of a room is considered, displacement ventilation can result in lower effectiveness than mixing ventilation. When a room is considered as a whole, displacement ventilation yields higher effectiveness than mixing ventilation and we quantify these differences in terms of the geometry of the space and opening area. The proposed theoretical predictions are compared with effectiveness deduced from measurements made during laboratory experiments and show good agreement. © 2006 Elsevier Ltd. All rights reserved.

Ventilation effectiveness measures based on heat removal: Part 1. Definitions

The effectiveness of ventilation flows is considered from the perspective of buoyancy (or heat) removal from a space. This perspective is distinct from the standard in which the effectiveness is based on the concentrations of a neutrally buoyant contaminant/passive tracer. Three new measures of effectiveness are proposed based on the ability of a flow to flush buoyancy from a ventilated space. These measures provide estimates of instantaneous and time-averaged effectiveness for the entire space, and local effectiveness at any height of interest. From a generalisation of the latter, a vertical profile of effectiveness is defined. These measures enable quantitative comparisons to be made between different flows and they are applicable when there is a difference in density (as is typical due to temperature differences) between the interior environment and the replacement air. Applications, therefore, include natural ventilation, hybrid ventilation and a range of forced ventilation flows. Finally, we demonstrate how the ventilation effectiveness of a room may be assessed from simple traces of temperature versus time. © 2006 Elsevier Ltd. All rights reserved.

Facets of prior experience and the effectiveness of inclusive design

Research in inclusive design has shown the importance of prior experience for the usability of interactive products. Prior experience, however, is an ill-defined and inconsistently used construct. A number of different definitions and operationalisations of experience exist, but the differing power of these operationalisations to predict the usability of products for older users has rarely been investigated systematically. This study seeks to fill that gap. It is argued that the construct of experience has at least three components. It is proposed that two of these components, exposure and competence, are directly relevant for the current discussion about prior experience in inclusive design and that they can predict to different degrees the usability of a product for older users. In an empirical study, these facets of expertise are each operationalised on three levels of specificity and their impact on usability is assessed. The results show that measures of competence predict usability variables more strongly than measures of exposure and that levels of medium and high specificity are the best predictors. The application of inclusive design principles to a redesigned version of a ticket vending machine-although not resulting in a difference of overall usability-changed the impact of prior experience on usability measures implying an enhanced inclusiveness of the redesign with regard to prior experience. The implications of these findings for the effectiveness of inclusive design for older users are discussed. © 2013 Springer-Verlag Berlin Heidelberg.