Development of Border Economic Zones in Thailand: Expansion of Border Trade and Formation of Border Economic Zones

In the wake of economic globalization and development in Thailand, movement of people and commodities at the Thai borders is also becoming pronounced. Economic interdependence between Thailand and neighboring countries is growing through border customhouses. As a policy, Thailand is trying to stimulate trade and investment with neighboring countries following the ACMECS (Ayeyawady-Chao Phraya-Mekong Economic Cooperation Strategy) scheme. In this report, first, movement of people and goods at the borders will be examined. Second, clarification of where and how development is proceeding will be presented. Last, this study will attempt to review the perspectives of policies on neighboring countries after Thaksin.

Revisiting labour and gender issues in Export Processing Zones : the cases of South Korea, Bangladesh and India

The establishment of Export Processing Zones (EPZs) is a strategy for economic development that was introduced almost fifty years ago and is nowadays employed in a large number of countries. While the number of EPZs including several variants such as Special Economic Zone (SEZs) has increased continuously, general interest in EPZs has declined over the years in contrast to earlier heated debates regarding the efficacy of the strategy and its welfare effects especially on women workers. This article re-evaluates the historical trajectories and outstanding labour and gender issues of EPZs on the basis of the experiences of South Korea, Bangladesh and India. The findings suggest the necessity of enlarging our analytical scope with regard to EPZs, which are inextricably connected with external employment structures, whether outside the EPZ but within the same country, or outside the EPZ and its host country altogether.

Border Trade and Economic Zones on the North-South Economic Corridor: Focusing on the Connecting Points between the Four Countries

The North-South Economic Corridor (NSEC), the road between Bangkok and Kunming, China, including the Laos route (R3B) and the Myanmar route (R3B), has been developed since 1998 following the GMS program. The region covering Yunnan Province in China, Shan State in Myanmar, Northern Laos and Northern Thailand has historical and ethnic closeness, and is a comparatively poor mountainous, boundary area. In the wake of the development of the NSEC, however, the region has started to show signs of change. Consequently, a review is to be carried out concerning the movement of people and cars, border trade and the situation concerning the progress of border economic zones at the five nodal border points in the four countries, and over three routes: R3A, R3B, and the Mekong River route.

Are special economic zones a curse on those "chosen" to be evicted? : evidence form West Bengal, India

Using data from a self-administered survey of 1,017 households we assess the long-term impact of establishing a special economic zone, on those who are exogenously selected to be displaced. We find those who are displaced suffer from lower land compensation and lack of adequate property rights. There is also some evidence of lower labour market participation among those who are displaced. However, in the long term, across measurable welfare indicators, we do not find that displaced households are significantly different from other households. One source of this resilience is through employment at the special economic zone – which is higher among displaced households compared to other households. Another factor that contributed to the absence of differences is spill-over effects; which made access to employment, education and other facilities about homogenous across displaced and non-displaced households.

Gold Ores Related to Shear Zones, West Santa Comba Fervenza Area (Galicia, NW Spain): A Mineralogical Study

Recent research has discovered high-grade Au ores in NNE-SSW trending shear zones in metamorphic proterozoic and palaeozoic terranes, some 40 km NW of Santiago de Compostela (NW Spain). The orebodies are bound to late-stage Hercynian structures, mainly due to brittle deformation, which are superimposed on earlier ductile shear zones, cutting through various catazonal lithologies, including ortho- and paragneisses, amphibolites, eclogites, and granites. Ore mineralogy, alteration, and ore textures define a frame whose main features are common to all prospects in the area. Main minerals are arsenopyrite and pyrite - accompanied by quartz, adularia, sericite, + (tourmaline, chlorite, carbonates, graphite), as main gangue minerals - with subordinate amounts of boulangerite, bismuthinite, kobellite, jamesonite, chalcopyrite, marcasite, galena, sphalerite, rutile, titanite, scheelite, beryl, fluorite, and minor native gold, electrum, native bismuth, fahlore, pyrrhotite, mackinawite, etc., defining a meso-catathermal paragenesis. Detailed microscopic study allows the author to propose a general descriptive scheme of textural classification for this type of ore. Most of the ores fill open spaces or veins, seal cracks or cement breccias; disseminated ores with replacement features related to alteration (mainly silicification, sericitization, and adularization) are also observed. Intensive and repeated cataclasis is a common feature of many ores, suggesting successive events of brittle deformation, hydrothermal flow, and ore precipitation. Gold may be transported and accumulated in any of these events, but tends to be concentrated in later ones. The origin of the gold ores is explained in terms of hydrotherreal discharge, associated with mainly brittle deformation and possibly related to granitic magmas, in the global tectonic frame of crustal evolution of West Galicia. The mineralogical and textural study suggests some criteria which will be of practical value for exploration and for ore processing. Ore grades can be improved by flotation of arsenopyrite. Non-conventional methods, such as pressure or bacterial leaching, may subsequently obtain a residue enriched in gold.

Topological invariance and spatial scaling of surface roughness in two highly eroded zones of Mexico: a comparative study

The Fractal Image Informatics toolbox (Oleschko et al., 2008 a; Torres-Argüelles et al., 2010) was applied to extract, classify and model the topological structure and dynamics of surface roughness in two highly eroded catchments of Mexico. Both areas are affected by gully erosion (Sidorchuk, 2005) and characterized by avalanche-like matter transport. Five contrasting morphological patterns were distinguished across the slope of the bare eroded surface of Faeozem (Queretaro State) while only one (apparently independent on the slope) roughness pattern was documented for Andosol (Michoacan State). We called these patterns ?the roughness clusters? and compared them in terms of metrizability, continuity, compactness, topological connectedness (global and local) and invariance, separability, and degree of ramification (Weyl, 1937). All mentioned topological measurands were correlated with the variance, skewness and kurtosis of the gray-level distribution of digital images. The morphology0 spatial dynamics of roughness clusters was measured and mapped with high precision in terms of fractal descriptors. The Hurst exponent was especially suitable to distinguish between the structure of ?turtle shell? and ?ramification? patterns (sediment producing zone A of the slope); as well as ?honeycomb? (sediment transport zone B) and ?dinosaur steps? and ?corals? (sediment deposition zone C) roughness clusters. Some other structural attributes of studied patterns were also statistically different and correlated with the variance, skewness and kurtosis of gray distribution of multiscale digital images. The scale invariance of classified roughness patterns was documented inside the range of five image resolutions. We conjectured that the geometrization of erosion patterns in terms of roughness clustering might benefit the most semi-quantitative models developed for erosion and sediment yield assessments (de Vente and Poesen, 2005).

Floating liquid zones

The aim of our experiment on the Spacelab Dl Mission was to study the stability of long liquid columns under microgravity. Nominal configuration was a cylindrical liquid bridge anchored at the edges of two equal solid discs, 35 mm in diameter. Mechanical stimuli were applied through the discs and the liquid outer shape recorded for analysis. Nominal experiment procedures [1] were similar to those proposed for Spacelab-1 (1983), where by wetting problems allowed only partial success [2]. The same Fluid Physics Module, but with corrected end discs and a manually operated syringe for liquid injection, was used.

A UGV Navigation System for Large Outdoor Environments Including Virtual Obstacles for No-Go Zones

This work presents a navigation system for UGVs in large outdoor environments; virtual obstacles are added to the system in order to avoid zones that may present risks to the UGV or the elements in its surroundings. The platform, software architecture and the modifications necessary to handle the virtual obstacles are explained in detail. Several tests have been performed and their results show that the system proposed is capable of performing safe navigation in complex environments.

An evaluation of seismic hazard in La Hispaniola, after the 2010 Haiti earthquake

An evaluation of the seismic hazard in La Hispaniola Island has been carried out, as part of the cooperative project SISMO-HAITI, supported by the Technical University of Madrid (UPM) and developed by several Spanish Universities, the National Observatory of Environment and Vulnerability) ONEV of Haiti, and with contributions from the Puerto Rico Seismic Network (PRSN) and University Seismological Institute of Dominican Republic (ISU). The study was aimed at obtaining results suitable for seismic design purposes. It started with the elaboration of a seismic catalogue for the Hispaniola Island, requiring an exhaustive revision of data reported by more than 20 seismic agencies, apart from these from the PRSN and ISU. The final catalogue contains 96 historical earthquakes and 1690 instrumental events, and it was homogenized to moment magnitude, Mw. Seismotectonic models proposed for the region were revised and a new regional zonation was proposed, taking into account geological andtectonic data, seismicity, focal mechanisms, and GPS observations. In parallel, attenuation models for subduction and crustal zones were revised in previous projects and the most suitable for the Caribbean plate were selected. Then, a seismic hazard analysis was developed in terms of peak ground acceleration, PGA, and spectral accelerations, SA (T), for periods of 0.1, 0.2, 0.5, 1 and 2s, using the Probabilistic Seismic Hazard Assessment (PSHA) methodology. As a result, different hazard maps were obtained for the quoted parameters, together with Uniform Hazard Spectra for Port au Prince and the main cities in the country. Hazard deaggregation was also carried out in these towns, for the target motion given by the PGA and SA (1s) obtained for return periods of 475, 975 and 2475 years. Therefore, the controlling earthquakes for short- and long-period target motions were derived. This study was started a few months after the 2010 earthquake, as a response to an aid request from the Haitian government to the UPM, and the results are available for the definition of the first building code in Haiti.

Numerical characterization of particle dispersion in the turbulent recirculation zones of sudden expansion pipe flows

The dispersion of solid particles in the turbulent recirculation zones of sudden expansion pipes can be characterized by different Stokes numbers and mean drift parameter and its study is important because this kind of flows appears in many technological applications.

Analysis of the problems associated with dynamic interaction between train, track and structure at transition zones

El gran desarrollo experimentado por la alta velocidad en los principales países de la Unión Europea, en los últimos 30 años, hace que este campo haya sido y aún sea uno de los principales referentes en lo que a investigación se refiere. Por otra parte, la aparición del concepto super − alta velocidad hace que la investigación en el campo de la ingeniería ferroviaria siga adquiriendo importancia en los principales centros de investigación de los países en los que se desea implantar este modo de transporte, o en los que habiendo sido ya implantado, se pretenda mejorar. Las premisas de eficacia, eficiencia, seguridad y confort, que este medio de transporte tiene como razón de ser pueden verse comprometidas por diversos factores. Las zonas de transición, definidas en la ingeniería ferroviaria como aquellas secciones en las que se produce un cambio en las condiciones de soporte de la vía, pueden afectar al normal comportamiento para el que fue diseñada la infraestructura, comprometiendo seriamente los estándares de eficiencia en el tiempo de viaje, confort de los pasajeros y aumentando considerablemente los costes de mantenimiento de la vía, si no se toman las medidas oportunas. En esta tesis se realiza un estudio detallado de la zonas de transición, concretamente de aquellas en las que existe una cambio en la rigidez vertical de la vía debido a la presencia de un marco hidráulico. Para realizar dicho estudio se lleva a cabo un análisis numérico de interacción entre el vehículo y la estructura, con un modelo bidimensional de elemento finitos, calibrado experimentalmente, en estado de tensión plana. En este análisis se tiene en cuenta el efecto de las irregularidades de la vía y el comportamiento mecánico de la interfaz suelo-estructura, con el objetivo de reproducir de la forma más real posible el efecto de interacción entre el vehículo, la vía y la estructura. Otros efectos como la influencia de la velocidad del tren y los asientos diferenciales, debidos a deformaciones por consolidación de los terraplenes a ambos lados el marco hidráulico, son también analizados en este trabajo. En esta tesis, los cálculos de interacción se han llevado a cabo en dos fases diferentes. En la primera, se ha considerado una interacción sencilla debida al paso de un bogie de un tren Eurostar. Los cálculos derivados de esta fase se han denominado cálculos a corto plazo. En la segunda, se ha realizado un análisis considerando múltiples pasos de bogie del tren Eurostar, conformando un análisis de degradación en el que se tiene en cuenta, en cada ciclo, la deformación de la capa de balasto. Los cálculos derivados de esta fase, son denominados en el texto como cálculos a largo plazo. Los resultados analizados muestran que la utilización de los denominados elementos de contacto es fundamental cuando se desea estudiar la influencia de asientos diferenciales, especialmente en transiciones terraplén-estructura en las que la cuña de cimentación no llega hasta la base de cimentación de la estructura. Por otra parte, tener en cuenta los asientos del terraplén, es sumamente importante, cuando se desea realizar un análisis de degradación de la vía ya que su influencia en la interacción entre el vehículo y la vía es muy elevada, especialmente para valores altos de velocidad del tren. En cuanto a la influencia de las irregularidades de la vía, en los cálculos efectuados, se revela que su importancia es muy notable, siendo su influencia muy destacada cuanto mayor sea la velocidad del tren. En este punto cabe destacar la diferencia de resultados derivada de la consideración de perfiles de irregularidades de distinta naturaleza. Los resultados provenientes de considerar perfiles artificiales son en general muy elevados, siendo estos más apropiados para realizar estudios de otra índole, como por ejemplo de seguridad al descarrilamiento. Los resultados provenientes de perfiles reales, dados por diferentes Administradores ferroviarios, presentan resultados menos elevados y más propios del problema analizar. Su influencia en la interacción dinámica entre el vehículo y la vía es muy importante, especialmente para velocidades elevadas del tren. Además el fenómeno de degradación conocido como danza de traviesas, asociado a zonas de transición, es muy susceptible a la consideración de irregularidades de la vía, tal y como se desprende de los cálculos efectuados a largo plazo. The major development experienced by high speed in the main countries of the European Union, in the last 30 years, makes railway research one of the main references in the research field. It should also be mentioned that the emergence of the concept superhigh − speed makes research in the field of Railway Engineering continues to gain importance in major research centers in the countries in which this mode of transportation is already implemented or planned to be implemented. The characteristics that this transport has as rationale such as: effectiveness, efficiency, safety and comfort, may be compromised by several factors. The transition zones are defined in railway engineering as a region in which there is an abrupt change of track stiffness. This stiffness variation can affect the normal behavior for which the infrastructure has been designed, seriously compromising efficiency standards in the travel time, passenger comfort and significantly increasing the costs of track maintenance, if appropriate measures are not taken. In this thesis a detailed study of the transition zones has been performed, particularly of those in which there is a change in vertical stiffness of the track due to the presence of a reinforced concrete culvert. To perform such a study a numerical interaction analysis between the vehicle, the track and the structure has been developed. With this purpose a two-dimensional finite element model, experimentally calibrated, in a state of plane stress, has been used. The implemented numerical models have considered the effects of track irregularities and mechanical behavior of soil-structure interface, with the objective of reproducing as accurately as possible the dynamic interaction between the vehicle the track and the structure. Other effects such as the influence of train speed and differential settlement, due to secondary consolidation of the embankments on both sides of culvert, have also been analyzed. In this work, the interaction analysis has been carried out in two different phases. In the first part a simple interaction due to the passage of a bogie of a Eurostar train has been considered. Calculations derived from this phase have been named short-term analysis. In the second part, a multi-load assessment considering an Eurostar train bogie moving along the transition zone, has been performed. The objective here is to simulate a degradation process in which vertical deformation of the ballast layer was considered. Calculations derived from this phase have been named long-term analysis. The analyzed results show that the use of so-called contact elements is essential when one wants to analyze the influence of differential settlements, especially in embankment-structure transitions in which the wedge-shaped backfill does not reach the foundation base of the structure. Moreover, considering embankment settlement is extremely important when it is desired to perform an analysis of track degradation. In these cases the influence on the interaction behaviour between the vehicle and the track is very high, especially for higher values of speed train. Regarding the influence of the track irregularities, this study has proven that the track’s dynamic response is heavily influenced by the irregularity profile and that this influence is more important for higher train velocities. It should also be noted that the difference in results derived from consideration of irregularities profiles of different nature. The results coming from artificial profiles are generally very high, these might be more appropriate in order to study other effects, such as derailment safety. Results from real profiles, given by the monitoring works of different rail Managers, are softer and they fit better to the context of this thesis. The influence of irregularity profiles on the dynamic interaction between the train and the track is very important, especially for high-speeds of the train. Furthermore, the degradation phenomenon known as hanging sleepers, associated with transition zones, is very susceptible to the consideration of track irregularities, as it can be concluded from the long-term analysis.

Desarrollos metodológicos y aplicaciones hacia el cálculo de la peligrosidad sísmica en el ecuador continental y estudio de riesgo sísmico en la ciudad de Quito

En el presente trabajo de tesis se desarrolla, en primer lugar, un estudio de peligrosidad sísmica en Ecuador continental, siguiendo una metodología probabilista zonificada. El estudio se plantea a escala regional y presenta como principales aportaciones: 1) la elaboración de un Estado del Arte sobre Tectónica y Geología de Ecuador, concluyendo con la identificación de las principales fuentes sísmicas; 2) La confección de un Catálogo Sísmico de proyecto, recopilando información de distintas agencias, que ha sido homogeneizado a magnitud momento, Mw, depurado de réplicas y premonitores y corregido por la falta de completitud para la estimación de tasas en diferentes rangos de magnitud; 3) la propuesta de un nueva zonificación sísmica, definiendo las zonas sismogenéticas en tres regímenes tectónicos: cortical, subducción interfase y subducción in-slab; 4) la caracterización sísmica de cada zona estimando los parámetros de recurrencia y Magnitud Máxima (Mmax), considerando para este último parámetro una distribución de valores posibles en función de la sismicidad y tectónica, tras un exhaustivo análisis de los datos existentes; 5) la generación de mapas de peligrosidad sísmica de Ecuador continental en términos de aceleración pico (PGA) y espectral SA (T= 1s) , en ambos casos para periodos de retorno (PR) de 475, 975 y 2475 años; 6) La estimación de espectros de peligrosidad uniforme (UHS) y sismos de control mediante desagregación de la peligrosidad, para PR de 475 y 2475 años en 4 capitales de provincia: Quito, Esmeraldas, Guayaquil y Loja. Una segunda parte del trabajo se destina al cálculo del riesgo sísmico en el Barrio Mariscal Sucre de Quito, lo que supone incidir ya a una escala municipal. Como principales contribuciones de este trabajo se destacan: 1) definición del escenario sísmico que más contribuye a la peligrosidad en Quito, que actuará como input de cálculo del riesgo; 2) caracterización de la acción sísmica asociada a ese escenario, incluyendo resultados de microzonación y efecto local en la zona de estudio; 3) Elaboración de una Base de Datos partiendo de información catastral e identificación de las tipologías dominantes; 4) Asignación de clases de vulnerabilidad y obtención de porcentajes de daño esperado en cada clase ante la acción sísmica definida previamente, con la consiguiente representación de mapas de vulnerabilidad y daño; 5) mapas de indicadores globales del riesgo sísmico; 6) Base de datos georreferenciada con toda la información generada en el estudio. Cabe destacar que el trabajo, aunque no formula nuevos métodos, si plantea una metodología integral de cálculo del riesgo sísmico, incorporando avances en cada fase abordada, desde la estimación de la peligrosidad o la definición de escenarios sísmicos con carácter hibrido (probabilista-determinista), hasta la asignación de vulnerabilidades y estimación de escenarios de daño. Esta tesis trata de presentar contribuciones hacia el mejor conocimiento de la peligrosidad sísmica en Ecuador y el riesgo sísmico en Quito, siendo uno de los primeros estudios de tesis que se desarrolla sobre estos temas en el país. El trabajo puede servir de ejemplo y punto de partida para estudios futuros; además de ser replicable en otras ciudades y municipios de Ecuador. -------------------- ABSTRACT: ------------------ This thesis first develops a study of seismic hazard in mainland Ecuador, following a zoned, probabilistic methodology. The study considers a regional scale and presents as main contributions: 1) The development of a State of Art on the Tectonics and Geology of Ecuador, concluding with the identification of the main seismic sources; 2) The creation of a Seismic Catalog project, collecting information from different agencies, which has been homogenized to Moment magnitude, Mw, purged from aftershocks and premonitories and corrected for the lack of completeness to estimate rates in different maggnitude ranges; 3) The proposal of a new seismic zoning, defining the seismogenic zones in three tectonic regimes: cortical, subduction interface and subduction in-slab; 4) The seismic characterization of each zone, estimating the parameters of recurrence and Maximum Magnitude (Mmax), considering the latter as a distribution of possible values, depending on the seismicity and tectonics, and after a thorough analysis of the existing data; 5) Seismic hazard maps of continental Ecuador in terms of peak ground acceleration (PGA) and spectral SA(T=1), and return periods (PR) of 475, 975 and 2475 years; 6) Uniform hazard spectra (UHS) and control earthquakes obtained by hazard disaggregation, for PR 475 and 2475 years in four provincial capitals: Quito, Esmeraldas, Guayaquil and Loja. The second section focuses on the calculation of seismic risk in the Quito Mariscal Sucre parish, which is already supposed to be influencing at a municipal level. The main contributions here are the: 1) Definition of the seismic scenario that contributes most to the hazard in Quito, which acts as an input in the risk calculation; 2) Characterization of the seismic action associated with that scenario, including results of micro-zoning and local effect in the study area; 3) Development of a database, based on cadastral data and identification of key typologies; 4) Allocation of vulnerability classes and obtaining percentages of damage expected in each class faced with the seismic action previously defined, with the consequent representation of maps of vulnerability and damage; 5) Global maps of seismic risk indicators; 6) Geo-referenced database with all the information generated in the study. It should be noted that although new methods are not prescribed, this study does set a comprehensive methodology for the calculation of seismic risk, incorporating advances in each phase approached, from the hazard estimation, or definition of seismic scenarios applying a hybrid (deterministic-probabilistic) method, to the allocation of vulnerabilities and estimation of damage scenarios. This thesis aims to present contributions leading to a better understanding of seismic hazard in Ecuador and seismic risk in Quito, and is one of the first studies in the country to develop such themes. This study can serve as an example and starting point for future studies, which could replicate this methodology in other cities and municipalities.

Use of phosphorous mapping and sea-level change data in assessing coastal activity zones and establishing site chronology : A case study from the Icelandic multi-period site of Vatnsfjörður

This paper forms part of Lukasz Mikolajczyk's PhD dissertation, which is supervised by Karen Milek

The role of Wolbachia bacteria in reproductive incompatibilities and hybrid zones of Diabrotica beetles and Gryllus crickets

A rickettsial bacterium in the genus Wolbachia is the cause of a unidirectional reproductive incompatibility observed between two major beetle pests of maize, the western corn rootworm, Diabrotica virgifera virgifera, and the Mexican corn rootworm, D. v. zeae. These subspecies are allopatric except for two known regions of sympatry in Texas and Mexico. We demonstrate that populations of D. v. virgifera, with the exception of two populations in southern Arizona, are infected with a strain of Wolbachia. Populations of D. v. zeae are not infected. Treatment of D. v. virgifera with tetracycline eliminated the Wolbachia and removed the reproductive incompatibility. Similar patterns of reproductive incompatibility exist among taxa of the cricket genus Gryllus. Gryllus assimilis, G. integer, G. ovisopis, G. pennsylvanicus, and G. rubens are infected with Wolbachia whereas G. firmus is usually not. Populations of G. rubens and G. ovisopis carry the same Wolbachia strain, which is distinct from that of G. integer. G. pennsylvanicus is infected with two Wolbachia strains, that found in G. rubens and one unique to G. pennsylvanicus. Moreover, a proportion of G. pennsylvanicus individuals harbors both strains. Wolbachia may have influenced speciation in some members of the genus Gryllus by affecting the degree of hybridization between species. Given that Wolbachia infections are relatively common in insects, it is likely that other insect hybrid zones may be influenced by infections with Wolbachia.

Coexistence of linear zones and pinwheels within orientation maps in cat visual cortex

Revealing the layout of cortical maps is important both for understanding the processes involved in their development and for uncovering the mechanisms underlying neural computation. The typical organization of orientation maps in the cat visual cortex is radial; complete orientation cycles are mapped around orientation singularities. In contrast, long linear zones of orientation representation have been detected in the primary visual cortex of the tree shrew. In this study, we searched for the existence of long linear sequences and wide linear zones within orientation preference maps of the cat visual cortex. Optical imaging based on intrinsic signals was used. Long linear sequences and wide linear zones of preferred orientation were occasionally detected along the border between areas 17 and 18, as well as within area 18. Adjacent zones of distinct radial and linear organizations were observed across area 18 of a single hemisphere. However, radial and linear organizations were not necessarily segregated; long (7.5 mm) linear sequences of preferred orientation were found embedded within a typical pinwheel-like organization of orientation. We conclude that, although the radial organization is dominant, perfectly linear organization may develop and perform the processing related to orientation in the cat visual cortex.