Birds of a eucalyptus woodlot in interior São Paulo.

Some 255 birds were recorded between 1982-2001 in and near a 2314-ha Horto of old eucalyptus plantations with native understory and a lake, near Rio Claro, in central São Paulo, Brazil. This is close to the 263 recorded in and around a ten-times smaller nearby 230-ha woodlot of semideciduous forest. Different species were 44, for a total of 307 in both areas. One hundred and fifty nonvagrant forest and border species were recorded in 1982-86, a number close to the 152 in the small native woodlot. With dry years and logging of plots in 1985-93, 21 of the 150 species were lost, 42 species decreased in numbers, 49 were stable, 19 increased (15 being border species), and 5 entered (one of dry forest and 4 of borders), so 129 species remained in 1996-2001 compared to 133 in the native woodlot. Open-area birds were 33, versus 50 in better-checked grassy swales in sugar cane near the natural woodlot, for a total of 53. Several species, like some border ones, did not enter the open but isolated and mowed interior lake area, or took years to do so. Water and marsh birds were 46 versus 40 in smaller creeks and ponds near the natural woodlot (total, 55) but many were migrants or infrequent visitors using distant areas, and perhaps should be counted as 0.1-0.9 local species rather than 1 species. Use of this more accurate method would reduce waterbird totals by 14 species in the Horto and by 11 around the native woodlot. I also recommend longer censusing at the edges in large woodlots or many edge species will be recorded only in small fragments of habitat. Several species increased and others decreased with occasional cat-tail and water-lily cleanups at the lake. A forested corridor between the Horto and natural woodlot is recommended, with old eucalyptus left to provide flowers for hummingbirds.

Little cicada of sugarcane Mahanarva posticata (Homoptera: Cercopidae). A Brazilian agricultural pest. Morpho-histological study of salivary glands

Little cicadas are homopteran insect pests of sugarcane plantations. As these insects suck out the sap from the leaf parenchyma, they inoculate a toxic saliva that damages the plant vessels, thus promoting the loss of glucose by the affected plant. The morphological and histological analyses of the salivary glands of the little cicada Mahanarva posticata, revealed that these glands are formed by 2 portions: one portion comprises a group of acini and has been denominated as the principal gland; the second portion is filamentous in nature and has been denominated as the accessory gland; it is formed by very long and fine filaments. The acinous portion of the gland can be subdivided into 2 lobes: an anterior lobe formed by 3 lobules (I, II, III), and a posterior lobe formed by lobule IV and the excretory duct. Histologically, the salivary glands showed that the filaments are empty sutructures composed by several internal channels with secretion granules being observed in the cytoplasm of the cells of the secretory filaments. Lobules I and II of the principal gland are characterized by being highly basophilic and for accumulating a large amount of secretion in both the cytoplasm of the cells and inside secretion vesicles. Histochemically, we verified that the secretion produced by these glands is lipidic and protein in nature, with the production of polysaccharides being very low. The differences in stain and appearance of the different regions of the salivary gland lead us to believe that the final glandular product is lipoproteic in nature.

Efeitos do fósforo do solo no desenvolvimento inicial de Genipa americana L.

A greenhouse experiment was carried out to evaluate the effects of soil phosphorus in the development of plants of Genipa americana L. Five doses of P (0, 50, 100, 200, and 400 mg dm -3) were applied in pots with 10 dm 3 of three Neossolos Quartzarênicos (NQ 1, NQ 2 and NQ 3) and one Latossolo Vermelho (LV), that were used in an experiment with Eucalyptus plants during three months. After this period, the soils were analyzed and a 30 cm height seedling of G. americana was planted in each pot. The experiment design was completely randomized, in 5 × 4 factorial scheme, with five replications. The largest biomass of the stem was obtained with 45 mg dm -3 of P in the soil NQ 1 (9% of clay) and 59 mg dm -3 in the soil NQ 3 (14% of clay). In the LV (40% of clay), the biomass of the stem increased linearly in the band of 3 to 148 mg dm -3 of P. The phosphorus critical level in the soil for 80% of the steam and leaves dry matter production of G. americana at planting phase is 15 mg dm -3, using an anion-exchange resin as extractor.

Faixas de controle de plantas daninhas e seus reflexos no crescimento de plantas de eucalipto

Two field trial were conducted in Eucalyptus grandis W. Hill ex Maiden x Eucalyptus urophylla S.T. Blake crops at Três Lagoas, Mato Grosso do Sul State and Brotas, São Paulo State, Brazil, to evaluate the effects of weed control in strip of different width on the Eucalyptus plant growth. The experiments consisted of two groups treatments: group 1 - with constant width control strips being kept during the first 12 months, i.e., at 0, 25, 50, 100, 125 and 150cm on each side of the Eucalyptus row and, group 2: with increasing width control strips being adopted along the experimental period, i.e., at 25 to 150, 25-50-150, 50 to 150, 50-125-150, 100-125-150, 100 tot 150 and 125 to 150 cm on each side of the Eucalyptus row during the first 12 months. At 49 moths after planting it was verified that the Eucalyptus plants that had grown both in the constant and increasing width control strips, equal to or higher than 100 and 50 cm, respectively, showed higher steam diameter, plant height, volume and annual increment average of wood. These results led to the conclusion that the minimum control strip width should be 100 cm on each side of the Eucalyptus row in order to keep the crop free of weed interference.

Grazing time and milk production of crossbred cows in a rotational area of Elephant grass and Tanzania grass

This study was carried out in January of two consecutive years. The objective was to evaluate the grazing time, the grazing rate and the milk production of crossbred cows, managed in two rotational grazing areas, one with elephant grass (Pennisetum purpureum Schum. cv. Guaçu) and another one with Tanzania grass (Panicum maximum Jacq. cv. Tanzania), both with natural shade in the rest area. The experiment was divided in two phases, the first with 12 cows that remained day and night in the paddock and were milked twice a day. In the second phase 15 cows were observed and remained 10.43 hours in the paddock during the day, and were kept in a corral during the night. Each cow was observed every 15 minutes. Grass specie had no effect on milk production in the two phases of the experiment. The grazing time was 564 and 474 minutes and the grazing rate was 28.7 and 24.4 minutes/hour for the Elephant grass and Tanzania grass, respectively, in first phase. In the second phase,the grazing time was 461 and 426 minutes and the grazing rate was 42.7 and 39.4 minutes/hour for the Elephant grass and Tanzania grass, respectively. Correlations were observed (P<0.01) between grazing rate and the minimum temperature (-0.68), the maximum temperature (-0.76), the relative humidity (0.44) and the THI (-0.76).

Bioatividade de plantas medicinais no controle de Sclerotinia isolado de Stevia rebaudiana (Bert.) Bertoni

The microorganism Sclerotinia was isolated from roots of Stevia rebaudiana (Bert.) Bertoni in plantations in the northwest of Parana and submitted to the cultivation in the presence of extracts and vegetable balsams of Tarragon (Artemisia draconculus), Thyme (Thymus vulgaris), Manjerona (Origanum majorona), Mint citrata (Mintpiperita var. citrata), Purple Basil (Ocimum basilicum L.), Andiroba (Carapa guanensis) and Copaíba (Copaifera reticulata Ducke). The first five oils were extracted by steam drags, after the drying of the vegetable in greenhouse with circulation of air at 45°C. The last two were used in natura. A suspension (100ìl) of fungus previously cultivated, was added to each plate. The results show that after 7 days of incubation the thyme oils 10ìl, purple basil 25ìl, manjerona 25ìl, mint citrata 50ìl, tarragon 50ìl were capable to inhibit the growth of Sclerotinia, while the andiroba oil only reached this result with 200ìl. The copaiba balsam, even in the concentration of 500ìl, was unable to inhibit the growth of the microorganism.

Erosão hídrica de Latossolo Vermelho muito argiloso relevo ondulado em área de pós-plantio de eucalipto no Vale do Rio Doce, região Centro Leste do Estado de Minas Gerais

The erosion caused by running water constitutes important cause of environmental degradation and productivity reduction, which justifies its evaluation in areas of eucalypt commercial plantations, mainly in ondulated slope conditions. The present study was intended to evaluate the influence of different management systems, in an undulated eucalypt pos-planting area, upon soil and water losses by erosion. The experiment was installed in a very clayey Red Latosol (Oxisol) under three eucalypt management systems (downhill planting with burning of crop residues - EDq; downhill planting with maintenance of crop residues on soil surface - ED; level planting with maintenance of crop residues on soil surface - EN), native forest (FN), bare soil (SD), and native pasture (PN). The soil and water losses evaluations were performed in standard plots installed in the field. All eucalypt systems presented very low values of soil losses in relation to the established tolerance limit, indicating the adequacy of these management systems concerning water erosion. The sustainability of these environments regarding erosion is indicated by the fact that soil losses in eucalipt were very close to those observed in native forest (reference).

Molecular phylogenetic and morphological analyses of Oidium heveae, a powdery mildew of rubber tree

Powdery mildew of rubber tree caused by Oidium heveae is an important disease of rubber plantations worldwide. Identification and classification of this fungus is still uncertain because there is no authoritative report of its morphology and no record of its teleomorphic stage. In this study, we compared five specimens of the rubber powdery mildew fungus collected in Malaysia, Thailand, and Brazil based on morphological and molecular characteristics. Morphological results showed that the fungus on rubber tree belongs to Oidium subgen. Pseudoidium. Nucleotide sequence analysis of the ribosomal DNA internal transcribed spacer (ITS) region and the large subunit rRNA gene (28S rDNA) were conducted to determine the relationships of the rubber powdery mildew fungus and to link this anamorphic fungus with its allied teleomorph. The results showed that the rDNA sequences of the two specimens from Malaysia were identical to a specimen from Thailand, whereas they differed by three bases from the two Brazilian isolates: one nucleotide position in the ITS2 and two positions in the 28S sequences. The ITS sequences of the two Brazilian isolates were identical to sequences of Erysiphe sp. on Quercus phillyraeoides collected in Japan, although the 28S sequences differed at one base from sequences of this fungus. Phylogenetic trees of both rDNA regions constructed by the distance and parsimony methods showed that the rubber powdery mildew fungus grouped with Erysiphe sp. on Q. phillyraeoides with 100% bootstrap support. Comparisons of the anamorph of two isolates of Erysiphe sp. from Q. phillyraeoides with the rubber mildew did not reveal any obvious differences between the two powdery mildew taxa, which suggests that O. heveae may be an anamorph of Erysiphe sp. on Q. phillyraeoides. Cross-inoculation tests are required to substantiate this conclusion. © The Mycological Society of Japan and Springer-Verlag 2005.

Assessment of the diet of 0- to 6-year-old children in municipal schools in a Brazilian city

Diet control is one of the important factors in the prevention of dental caries because food functions as substratum for fermentation and, consequently, for the formation of the organic acids that demineralize the tooth surface. This study aims to descriptively assess school diet and the associated caries-preventive methods applied to children in all municipal nursery schools of a Brazilian city (Aragatuba/SP). For this, a questionnaire with open and closed questions was used. The results showed that all schools serve school meal, which is composed mainly of sugar, carbohydrates, and proteins. The students enjoy the meal very much because for most of them, the meal served at school is the only source of food. It was observed that 90% of the schools offer other kinds of food besides the main school meal. The snacks served such as cakes, white hominy, and milk fudge are composed of sweet and highly cariogenic foods. It was also verified that in 13.30% of the schools, the daily supervised dental hygiene, an important procedure that should not be neglected, is not carried out. This procedure introduces the children to healthy habits that are added to those acquired in the family environment. It was concluded that the school diet is potentially cariogenic and, in association with the lack of daily dental hygiene, this potential may become even higher.

Influence of light curing source on microhardness of composite resins of different shades

Introduction: The evolution of light curing units can be noticed by the different systems recently introduced. The technology of LED units promises longer lifetime, without heating and with production of specific light for activation of camphorquinone. However, further studies are still required to check the real curing effectiveness of these units. Purpose: This study evaluated the microhardness of 4 shades (B-0.5, B-1, B-2 and B-3) of composite resin Filtek Z-250 (3M ESPE) after light curing with 4 light sources, being one halogen (Ultralux - Dabi Atlante) and three LED (Ultraled - Dabi Atlante, Ultrablue - DMC and Elipar Freelight - 3M ESPE). Methods: 192 specimens were distributed into 16 groups, and materials were inserted in a single increment in cylindrical templates measuring 4mm x 4mm and light cured as recommended by the manufacturer. Then, they were submitted to microhardness test on the top and bottom aspects of the cylinders. Results: The hardness values achieved were submitted to analysis of variance and to Tukey test at 5% confidence level. It was observed that microhardness of specimens varied according to the shade of the material and light sources employed. The LED appliance emitting greater light intensity provided the highest hardness values with shade B-0.5, allowing the best curing. On the other hand, appliances with low light intensity were the least effective. It was also observed that the bottom of specimens was more sensitive to changes in shade. Conclusion: Light intensity of LED light curing units is fundamental for their good functioning, especially when applied in resins with darker shades.

Photoacclimation in three species of freshwater red algae

Three freshwater Rhodophyta species (Audouinella eugenea, A. hermannii and Compsopogon coeruleus) were tested as to their responses (photosynthesis, growth and pigment concentration) to two irradiances (low light, LL, 65 μmol m -2 s-1 and high light, HL, 300 μmol m-2 s-1) and two periods (short time, ST, 4 d, and long time, LT, 28 d). Higher growth rates were consistently observed at LL but significant differences were observed only for A. hermannii. Higher values of photoinhibition at LL were found for the three species, which is consistent with the dynamic photoinhibition as a reversible photoprotective mechanism against high irradiance. Light-induced decreases of effective quantum yield (EQY) were observed in the three species consisting of pronounced decreases from LL to HL. Rapid increases of non-photochemical quenching (NPQ) were observed mainly at LL, indicating energy dissipation by reaction centers. Results revealed distinct photoacclimation strategies to deal with high irradiances: the two Audouinella species had only characteristics of shade-adapted algae: acclimation by changes of size of photosy stem units (PSU) under LT and by PSU number under ST; higher values of the photoinhibition parameter (β) and NPQ, and lower values of EQY at LL; higher recovery capacity of potential quantum yield (PQY) at LL and under ST; highly significant positive correlation of electron transport rate (ETR) with NPQ. In addition, C. coeruleus mixed some characteristics of sun-adapted algae: acclimation by changes of PSU number under LT and by PSU size under ST; higher recovery capacity of EQY than the other two species; weak or no correlation of ETR with NPQ. Thus, these characteristics indicate that C. coeruleus cope with high irradiances more efficiently than the Audouinella species.

Colorimetric evaluation of composite materials with different thickness by reflectance spectroscopy

Selection of the proper shade and color matching of restorations to natural dentition continues to be one of the most frustrating problems in dentistry and currently available shade guide presents a limited selection of colors compared to those found in natural dentition. This investigation evaluation if the composites resins shade B2 are equivalent to the Vita shade guide B2. Twelve composite resins (Renamel Microfill Super Brite- Cosmedent USA, Renamel Universal Brite- Cosmedent USA, Renamel Microfill Body- Cosmedent USA, Renamel Universal Body- Cosmedent USA, Opallis EB2-FGM, Opallis DB2-FGM, Filtek Supreme XT-3M/ESPE, Filtek Z250-3M/ESPE, Filtek Z350-3M/ESPE, Z100-3M/ESPE, 4 Seasons Dentin - Ivoclar/Vivadent, Tetric Ceram - Ivoclar/Vivadent) shade B2 were used. From each composite, two specimens were made in a steel matrix with 8.0 mm diameter and 10.0 mm different predetermined thickness (0.2, 0.4, 0.6, 0.8, 1.0, 1.2, 1.4, 1.6, 1.8, 2.0 mm). The specimens were 40 seconds light polymerized by LED Ultrablue (DMC). The specimens were measured 10 times each to determine the shade using a reflectance spectrophotometer (Pocket Spec). According to results was verified that not any of composites resins shade B2 evaluated in this study presented values of color difference (ΔE) equivalent to the Vita shade guide B2 and the 2 mm thickness showed the closer match to the Vita shade guide B2.

Geoprocessamento aplicado na distribuição espacial da capacidade de uso de uma microbacia

The present study aimed to show the spatial distribution of the Rochas watershed (Avaré-SP, Brazil) soil use capacity using the Idrisi geographical information system in order to contribute to a better territorial organization and the planning of the appropriate soil occupation. The obtained results using this methodology showed that most of the Rocha watershed areas are from the following groups: dystrophic yellow-red latosol (36.64%), eutroferric and distroferric red latosol (30.30%) with sandy texture. There was a predominance of areas with slope classes of 0-12%, plain to wavy relief (61.37% of the watershed area) showing that these areas are appropriate for annual culture plantations with wide use of machinery. Most of these areas were classified as class IV (73.79%) as to use capacity. In the studied area the following subclasses of land use capacity were found: IIe, s; IIIe; IVe; IVs; IVe,s; VIe and VIIe. Capacity subclasses IVe; IVe,s; IVs and Vie were the most significant because they are areas that can be used for agriculture but subject to severe soil impoverishment if there are no special care mainly for annual cultures. The Idrisi geographical information system was efficient to determine soil use capacity of the Rocha's watershed showing that the use of geoprocessing tools makes data analysis easier and faster, allowing digital data storage for future analysis uses mainly for territorial planning and environmental studies.

Efeitos da luminosidade no crescimento de mudas de Caesalpinia ferrea Mart. ex Tul. (Leguminosae, Caesalpinoideae)

Caesalpinia ferrea is a species used a lot as a medicinal plant, for urban arborization and landscape design in the state of Amapa. Yet there is not much ecophysiological information available on it. Light is an important environment factor that controls processes associates with the accumulation of dry matter, contributing thus for plant growth. The object of this research was to study the effect of different luminosity levels on the growth of seedlings of this species. The seedlings were transplanted to plastics bags containing a mixture of soil and sand (2:1), which were maintained in the full sun, under artificial shade with reduction of 50% and 70% of the luminosity and under natural shade of a closed canopy of forest. The experimental design was completely randomized with five replicates. Seedlings submitted to natural shade showed strong growth inhibition. In the full sun, the seedlings presented higher net assimilatory rate (NAR), lower shoot/root ratio (SRR) and lower leaf area ratio (LAR). The results showed little difference in the growth and biomass allocation between seedlings kept in 50 and 70% shade; the seedlings submitted to this treatment presented higher values of SRR and LAR. This indicates plasticity which influences a possible increase in light capture and is important, therefore, to keep the seedling growth and survival under low light levels. The results as a whole showed morphological and physiological adjustment to different light levels in Caesalpinia ferrea.

Microhardness assessment of different commercial brands of resin composites with different degrees of translucence

Owing to improvements in its mechanical properties and to the availability of shade and translucence resources, resin composite has become one of the most widely used restorative materials in present day Dentistry. The aim of this study was to assess the relation between the surface hardness of seven different commercial brands of resin composites (Charisma, Fill Magic, Master Fill, Natural Look, Opallis, Tetric Ceram, and Z250) and the different degrees of translucence (translucid, enamel and dentin). Vickers microhardness testing revealed significant differences among the groups. Z250 was the commercial brand that showed the best performance in the hardness test. When comparing the three groups assessed within the same brand, only Master Fill and Fill Magic presented statistically significant differences among all of the different translucencies. Natural Look was the only one that showed no significant difference among any of the three groups. Charisma, Opallis, Tetric Ceram and Z250 showed significant differences among some of the tested groups. Based on the results found in this study, it was not possible to establish a relation between translucence and the microhardness of the resin composites assessed. Depending on the material assessed, however, translucence variation did affect the microhardness values of the resin composites.