Watching the clock

Discusses the implications of the Court of Appeal ruling in Ashe v National Westminster Bank Plc on whether a mortgagee's right to possession ran from the date that the legal charge was made over property, meaning that attempts to enforce possession 12 years after the mortgage was agreed were statute barred. Considers the reasons for banks to delay possession, the application of adverse possession rules in this context and the issue of public interest. Advises mortgagees on the benefits of limiting rights to possession to only become actionable when mortgagors are in default to avoid claims becoming statue barred. [From Legal Journals Index]

Twentieth Century Society Spring lecture series: second lives for Twentieth Century masterpieces

The Twentieth Century Society’s Spring lecture series (six in total) looks at the restoration and refurbishment of key C20 buildings in Britain and the US. Buildings covered: BBC Broadcasting House in London (G Val Meyer 1930-32, MacCormac Jamieson Prichard 2000-09). Speaker: Mark Hines (Mark Hines Architects), was the project architect and is the author of The Story of Broadcasting House: Home of the BBC. 5 February 2009. Crown Hall, Chicago (Mies van der Rohe 1952), the Art and Architecture Building, Yale University, New Haven (Paul Rudolf 1961-63) and the former Wills head office in Bristol (SOM with YRM 1970-75). Speaker: Patrick Bellew (Atelier 10 Engineers), 12 February 2009. Center for British Art, Yale University, New Haven (Louis Kahn 1969-77). Speaker: Peter Inskip (Inskip and Jenkins Architects), 17 February 2009. Brunswick Centre London (Patrick Hodgkinson 1967-72; Levitt Bernstein with Patrick Hodgkinson 2006). Speaker: Stuart Tappin (Stand Consulting Engineers Ltd), 26 February 2009. De La Warr Pavilion, Bexhill-on-Sea (Mendelsohn and Chermayeff 1934-5, John McAslan and Partners 2000-05). Speaker: Mark Cannata (HOK Architects), 5 March 2009. Finsbury Health Centre London (Lubetkin & Tecton 1938, first phase of conservation work Avanti Architects 1995.). Speaker: John Allan of Avanti Architects, 12 March 2009.

Enlightenment and mission in early nineteenth century South Africa

In the early 19th century the London Missionary Society’s activities in South Africa were the subject of great scandal and a source of disrepute. The behaviour and attitudes of the first wave of LMS missionaries had challenged, and caused outrage, to both the political and moral norms of the colony. The radical attitudes and unconventional private lives of many of the early missionaries had also clearly shocked the Directors in Europe. In these controversies, and in the manner that the Society dealt with them, there can be read a contestation about not only the character, but also the purpose of mission activity. Was the Missionary task to work for political stability, to spread European values and help prepare a compliant and educated workforce? Or was it to save ‘lost souls’ and turn people away from idolatry and sin? Or, again, was it to fight for the oppressed, to liberate slaves and oppose tyranny? These debates were framed in complex and contradictory ways by a larger discussion that was informed by the new ideas and agendas that had emerged in the 18th century, commonly referred to as ‘The Enlightenment’. This paper traces the contours of an engagement between ‘Evangelical’ values and ‘Enlightenment’ principles through an exploration of the issues of the day such as: abolitionism, women’s rights, civilization and savagery. [From the Author]

Development of an in-situ, non-destructive ultrasonic monitoring technique for solder pastes

This paper concerns the use of a non-destructive ultrasonic technique for characterising the rheological properties of solder paste and specifically, the use of through-mode microsecond ultrasonic pulses for evaluation of viscoelastic properties of paste materials at the molecular level. Ultrasonic techniques are a widely used and a reliable form of non-destructive testing of materials. This is because techniques such as ultrasounds while used for testing or monitoring material properties, has offered immense benefits in applications where access to the sample is restricted or when handling the sample for testing could interfere with the monitoring or analysis process. Very often, this would mean that the measurements taken are not a true representation of the behaviour of the material (due to externally incorporated changes into the material's physical state during the removal or testing process). Ultrasonic based techniques are being increasingly used for quality control and production monitoring functions which requires evaluation of the changes in material properties over wide range of industrial applications such as cement paste quality, plastic/polymer extrusion process, dough, and even sugar content in beverage drinks. In addition, ultrasound techniques are of great interest for their capacity to take rapid measurements in systems which are optically opaque. The viscometer and rheometer are two of the most widely used rheological instruments used in industry for monitoring the quality of solder pastes, during the production and packaging stage. One of the potential limitations of viscometer and rheometer based measurements is that the collection and preparation of the solder paste samples can irreversibly alter the structure and flow behaviour of the sample. Hence the measurement may not represent the actual quality of the whole production batch. Secondly, rheological measurements and the interpretation of rheological data is a very technical and time consuming process, which requires professionally trained R&D personnel. It is for these reasons that materials suppliers (who formulate and produce solder pastes) and solder paste consumers (especially, contract electronics manufacturers) are keen to see the development of simple, easy to use and accurate techniques for the theological characterisation of solder pastes. The results from the work show that the technique can be used by R&D personnel involved in paste formulation and manufacture to monitor the batch-to-batch quality and consistency.

In-situ non-destructive ultrasonic rheology technique for monitoring different lead-free solder pastes for surface mount applications

This paper investigates the application of a non-destructive ultrasonic technique for characterising the rheological properties of solder paste through the use of through-mode microsecond ultrasonic pulses for evaluation of viscoelastic properties of lead-free solder paste containing different types of flux. Ultrasonic techniques offer a robust and reliable form of non-destructive testing of materials where access to the sample is restricted or when sample handling can interfere with the monitoring or analysis process due to externally incorporated changes to the material’s physical state or accidental contamination during the removal or testing process. Ultrasonic based techniques are increasingly used for quality control and production monitoring functions which requires evaluation of changes in material properties for a wide range of industrial applications such as cement paste quality, plastic/polymer extrusion process, dough and even sugar content in beverage drinks. In addition, ultrasound techniques are of great interest for their capability to take rapid measurements in systems which are optically opaque. The conventional industry approach for characterising the rheological properties of suspensions during processing/packaging stage is mainly through the use of viscometer and some through the use of rheometer. One of the potential limitations of viscometer and rheometer based measurements is that the collection and preparation of the solder paste samples can irreversibly alter the structure and flow behaviour of the sample. Hence the measurement may not represent the actual quality of the whole production batch. Secondly, rheological measurements and the interpretation of rheological data is a very technical and time consuming process, which requires professionally trained R&D personnel. The ultrasound technique being proposed provides simple, yet accurate and easy to use solution for the in-situ rheological characterisation of solder pastes which will benefit the materials suppliers (who formulate and produce solder pastes) and solder paste consumers (especially, contract electronics manufacturers). The results from the work show that the technique can be used by R&D personnel involved in paste formulation and manufacture to monitor the batch-to-batch quality and consistency.

Laser Doppler velocimetry measurements of particle velocity profiles in gas-solid two-phase flows

The measurement of particle velocities in two-phase gas-solid systems has a wide application in flow monitoring in process plant, where two-phase gas-solids systems are frequently employed in the form of pneumatic conveyors and solid fuel injection systems. Such measurements have proved to be difficult to make reliably in industrial environments. This paper details particle velocity measurements made in a two phase gas-solid now utilising a laser Doppler velocimetry system. Tests were carried out using both wheat flour and pulverised coal as the solids phase, with air being used as the gaseous phase throughout. A pipeline of circular section, having a diameter of 53 mm was used for the test work, with air velocities ranging from 25 to 45 m/s and suspension densities ranging from 0.001 kg to 1 kg of solids per cubic meter of air. Details of both the test equipment used, and the results of the measurements are presented.