Modeling of adsorption in finite cylindrical pores by means of density functional theory

Adsorption of argon at its boiling point infinite cylindrical pores is considered by means of the non-local density functional theory (NLDFT) with a reference to MCM-41 silica. The NLDFT was adjusted to amorphous solids, which allowed us to quantitatively describe argon adsorption isotherm on nonporous reference silica in the entire bulk pressure range. In contrast to the conventional NLDFT technique, application of the model to cylindrical pores does not show any layering before the phase transition in conformity with experimental data. The finite pore is modeled as a cylindrical cavity bounded from its mouth by an infinite flat surface perpendicular to the pore axis. The adsorption of argon in pores of 4 and 5 nm diameters is analyzed in canonical and grand canonical ensembles using a two-dimensional version of NLDFT, which accounts for the radial and longitudinal fluid density distributions. The simulation results did not show any unusual features associated with accounting for the outer surface and support the conclusions obtained from the classical analysis of capillary condensation and evaporation. That is, the spontaneous condensation occurs at the vapor-like spinodal point, which is the upper limit of mechanical stability of the liquid-like film wetting the pore wall, while the evaporation occurs via a mechanism of receding of the semispherical meniscus from the pore mouth and the complete evaporation of the core occurs at the equilibrium transition pressure. Visualization of the pore filling and empting in the form of contour lines is presented.

Mechanics of raceway hysteresis in a packed bed

When a gas is introduced at high velocity through a nozzle into a packed bed, it creates a raceway in the packed bed. It has been found that the raceway size is larger when it is formed by decreasing the gas velocity from its highest value than when it is formed by increasing the gas velocity. This phenomenon is known as raceway hysteresis. A hypothesis has been oroposed to explain the hysteresis phenomenon based on a force-balance approach which includes frictional, bed-weight, and pressure forces. According to this hypothesis, the frictional force acts in different directions when the raceway is expanding and contracting. In this article, the entire packed bed has been divided into radial and Cartesian co-ordinate systems, and the forces acting on the raceway have been solved analytically for a simplified one-dimensional case. Based on the force-balance approach, a general equation has been obtained to predict the diameter of the raceway for increasing And decreasing velocities. A reasonable agreement has been found between the theoretical predictions and experimental observations. The model has also been compared with published experimental and plant data. The hysteresis mechanism in the packed beds can be described reasonably by taking into consideration the direction of frictional forces for the increasing- and decreasin-velocity cases. The effects of the particleshape factor and void fraction on the raceway hysteresis are examined.

Slurry flow in mills with TCPL - An efficient pulp lifter for ag/sag mills

The difficulties associated with slurry transportation in autogenous (ag) and semi-autogenous (sag) grinding mills have become more apparent in recent years with the increasing trend to build larger diameter mills for grinding high tonnages. This is particularly noticeable when ag/sag mills are run in closed circuit with classifiers such as fine screens/cyclones. Extensive test work carried out on slurry removal mechanism in grate discharge mills (ag/sag) has shown that the conventional pulp lifters (radial and curved) have inherent drawbacks. They allow short-circuiting of the slurry from pulp lifters into the grinding chamber leading to slurry pool formation. Slurry pool absorbs part of the impact thus inhibiting the grinding process. Twin Chamber Pulp Lifter (TCPL) - an efficient design of pulp lifter developed by the authors overcomes the inherent drawbacks of the conventional pulp lifters. Extensive testing in both laboratory and pilot scale mills has shown that the TCPL completely blocks the flow-back process, thus allowing the mill to operate close to their design flow capacity. The TCPL performance is also found to be independent of variations in charge volume and grate design, whereas they significantly affect the performance of conventional pulp lifters (radial and curved). (c) 2006 Elsevier B.V. All rights reserved.

Applications of transcranial Doppler in the ICU: a review

Objective: Transcranial Doppler (TCD) ultrasonography is a technique that uses a hand-held Doppler transducer (placed on the surface of the cranial skin) to measure the velocity and pulsatility of blood flow within the intracranial and the extracranial arteries. This review critically evaluates the evidence for the use of TCD in the critical care population. Discussion: TCD has been frequently employed for the clinical evaluation of cerebral vasospasm following subarachnoid haemorrhage (SAH). To a lesser degree, TCD has also been used to evaluate cerebral autoregulatory capacity, monitor cerebral circulation during cardiopulmonary bypass and carotid endarterectomies and to diagnose brain death. Technological advances such as M mode, colour Doppler and three-dimensional power Doppler ultrasonography have extended the scope of TCD to include other non-critical care applications including assessment of cerebral emboli, functional TCD and the management of sickle cell disease. Conclusions: Despite publications suggesting concordance between TCD velocity measurements and cerebral blood flow there are few randomized controlled studies demonstrating an improved outcome with the use of TCD monitoring in neurocritical care. Newer developments in this technology include venous Doppler, functional Doppler and use of ultrasound contrast agents.

Avaliação de medidas craniofaciais angulares e lineares em relação à quantidade de crescimento da face

A identificação dos padrões morfológicos da face é de extrema importância para a elaboração do diagnóstico ortodôntico e conseqüente plano de tratamento. Sendo assim, esta pesquisa teve como objetivo avaliar as relações entre as medidas lineares N-ENA, ENA-Pog e N-Pog, as medidas angulares N.OPI.ENA, ENA.OPI.Pog e N.OPI.Pog, e o índice VERT de acordo com a classificação proposta por RICKETTS. O material de estudo foi constituído de 700 telerradiografias, em norma lateral, de indivíduos brasileiros, leucodermas, de ambos os gêneros (318 do gênero masculino e 382 do gênero feminino), apresentando idade média de 16,66 anos. Das 700 telerradiografias foram constituídos quatro grupos de acordo com a oclusão. O primeiro grupo foi constituído de indivíduos com oclusão normal natural segundo ANDREWS, sendo observadas, clinicamente, quatro das seis chaves de oclusão. Os demais grupos se constituíram de indivíduos com más-oclusões de Classe I, II e III segundo ANGLE, sem relato de tratamento ortodôntico anterior. Após a análise estatística para a avaliação das medidas lineares N-ENA, ENA-Pog e N-Pog, e medidas angulares N.OPI.ENA, ENA.OPI.Pog e N.OPI.Pog, em relação ao índice VERT, evidenciou um aumento progressivo das medidas pesquisadas em relação aos seis padrões faciais determinados pelo índice VERT, mostrando um aumento destas medidas conforme se vai do padrão braquifacial severo para o padrão dolicofacial severo.

Beyond the aspect hypothesis:tense-aspect development in advanced L2 French

The Aspect Hypothesis (AH) claims that the association of any verb category (lexical aspect) with any grammatical aspect (perfective or imperfective) constitutes the endpoint of acquisition. The present book evaluates the explanatory power of the Aspect Hypothesis for the acquisition of French past tenses, which constitutes a serious stumbling block for foreign learners, even at the highest levels of proficiency. The present research applies the Aspect Hypothesis to the production of 61 Anglophone 'advanced learners' in a tutored environment. In so doing, it tests concurrent explanations, including the influence of the input, the influence of chunking, and the hypothesis of cyclic development. It discusses the cotextual and contextual factors that still provoke «non-native glitches» at the final stage of the Aspect Hypothesis. The book shows that the AH fails to account for the complex phenomenon of past tense development, as it adopts a local and linear approach.

Performance data indicate summation for pictorial depth-cues in slanted surfaces

Over recent years much has been learned about the way in which depth cues are combined (e.g. Landy et al., 1995). The majority of this work has used subjective measures, a rating scale or a point of subjective equality, to deduce the relative contributions of different cues to perception. We have adopted a very different approach by using two interval forced-choice (2IFC) performance measures and a signal processing framework. We performed summation experiments for depth cue increment thresholds between pairs of pictorial depth cues in displays depicting slanted planar surfaces made from arrays of circular 'contrast' elements. Summation was found to be ideal when size-gradient was paired with contrast-gradient for a wide range of depth-gradient magnitudes in the null stimulus. For a pairing of size-gradient and linear perspective, substantial summation (> 1.5 dB) was found only when the null stimulus had intermediate depth gradients; when flat or steeply inclined surfaces were depicted, summation was diminished or abolished. Summation was also abolished when one of the target cues was (i) not a depth cue, or (ii) added in conflict. We conclude that vision has a depth mechanism for the constructive combination of pictorial depth cues and suggest two generic models of summation to describe the results. Using similar psychophysical methods, Bradshaw and Rogers (1996) revealed a mechanism for the depth cues of motion parallax and binocular disparity. Whether this is the same or a different mechanism from the one reported here awaits elaboration.

A novel sensor interrogation technique using chirped fiber grating based sagnac loop

We demonstrate a novel and simple sensor interrogation scheme for fiber Bragg grating (FBG) based sensing systems. In this scheme, a chirped FBG based Sagnac loop is used as a wavelength-dependent receiver, and a stable and linear readout response is realised. It is a signijkant advantage of this scheme that the sensitivity and the measurement wavelength range can be easily adjhsted by controlling the chirp of the FBG or using an optical delay line in the Sagnac loop.

Novel hydrogel polymers

Hydrogels are a unique class of polymers which swell, but do not dissolve in water. A range of 2-hydroxyethyl methacrylate based copolymer hydrogels have been synthesised and are described in this thesis. Initially, hydrogels were synthesised containing acryloylmorpholine, N,N-dimethyl acrylamide and N-vinyl pyrrolidone. Variations in structure and composition have been correlated with the sequence distribution, equilibrium water content (EWC) , mechanical and surface properties of the hydrogels. The sequence distribution was found to be dependant on the structure and reactivity of the monomers. The EWC was found to be dependant on the water structuring groups present in the hydrogel, although the water binding abilities were modified by steric effects. The mechanical properties were also investigated and were found to be dependant on the monomer structure, sequence distribution and the amount and nature of water in the hydrogel. The macroscopic surface properties of the hydrogels were probed using surface energy determinations and were found to be a function of the water content and the hydrogel composition. At a molecular level, surface properties were investigated using an in vitro ocular spoilation model and single protein adhesion studies. The results indicate that the sequence distribution and the polarity of the surface affect the adhesion of biological species. Finally, a range of 2-hydroxyethyl methacrylate based copolymer hydrogels containing both charged monomer groups and linear polyethers have been synthesised and described. Although variations in the EWC are observed with the structure of the monomers, it was observed that the EWC increased due to the polar character of the charged monomers and the chain length and hydrophilicity of the polyethers. Investigation of these hydrogel surfaces revealed subtle changes. The molecular surface properties indicate the significance of the effect of charge and molecular mobility of the groups expressed at the hydrogel surface.

Factors affecting the growth of Cladophora in relation to river pollution

Nuisance growths of Cladophora have been associated with eutrophication. A review of the literature, however, reveals a scarcity of relevant experimental growth studies. Sampling experimental streams reveals that the addition of sewage effluent to good quality water alters the flora from that dominated by Potamogetan crispus to one dominated by CLadophora. Spatial and temporal differences in biomass of taxa present are discussed in the context of accompanying physicochemical data. In laboratory batch culture, growth of unialgal C. glomerata was accompanied by elevation of medium pH - considered largely responsible for the poor growth in such culture. However, appropriate experimental conditions and indices of growth were selected and the effects of various herbicides assessed. Diquat and terbutryne were shown to possess algicidal activity towards Cladophora. A closed continuous culture apparatus was developed: growth proceeded through lag, logarithmic and linear phases. Inoculum size and medium flow rate had significant effects on growth, and were standardized. In continuous culture, specific growth rate increased linearly with increased duration of light per day, up to 24 hours, and increased light intensity, up to 6000 lux - the highest intensity tested. Comparison of field and laboratory results suggests that ammonia toxicity is attributable to the undissociated form. In the laboratory, 185 µg/1 undissociated ammoniacal nitrogen reduced specific growth rate to 50% of that at 10 µg/1 undissociated ammcniacal nitrogen. 0.077-1.057 mg/1 NO2-N had no significant effect on growth. 7.2-15.2 mg/1 NO3-N had no significant effect on specific growth rate. Neither was any nitrate/phosphate interaction significant. At 4.9 mg/1 PO4-1, specific growth rate was only 48% of that at 1.9 g/1 P04-P. The critical medium PO4-P concentration was <0.1 mg/i. Specific growth rate was reduced to 50% of that in natural water by 0.036 mgCu/l, 0.070 mgzn/1 and 1.03 mgPb/l. Metal uptake was evaluated.

Refractometer based on fiber Bragg grating Fabry-Pérot cavity embedded with a narrow microchannel

We report on inscription of microchannels of different widths in optical fiber using femtosecond (fs) laser inscription assisted chemical etching and the narrowest channel has been created with a width down to only 1.2µm. Microchannels with 5µm and 35µm widths were fabricated together with Fabry-Pérot (FP) cavities formed by UV laser written fiber Bragg gratings (FBGs), creating high function and linear response refractometers. The device with a 5µm microchannel has exhibited a refractive index (RI) detection range up to 1.7, significantly higher than all fiber grating RI sensors. In addition, the microchannel FBG FP structures have been theoretically simulated showing excellent agreement with experimental measured characteristics.

An analysis of the effect of process parameters on the formability of sheet metal

This investigation is in two parts, theory and experimental verification. (1) Theoretical Study In this study it is, for obvious reasons, necessary to analyse the concept of formability first. For the purpose of the present investigation it is sufficient to define the four aspects of formability as follows: (a) the formability of the material at a critical section, (b) the formability of the material in general, (c) process efficiency, (d) proportional increase in surface area. A method of quantitative assessment is proposed for each of the four aspects of formability. The theoretical study also includes the distinction between coaxial and non-coaxial strains which occur, respectively, in axisymmetrical and unsymmetrical forming processes and the inadequacy of the circular grid system for the assessment of formability is explained in the light of this distinction. (2) Experimental Study As one of the bases of the experimental work, the determination of the end point of a forming process, which sets the limit to the formability of the work material, is discussed. The effects of three process parameters on draw-in are shown graphically. Then the delay of fracture in sheet metal forming resulting from draw-in is analysed in kinematical terms, namely, through the radial displacements, the radial and the circumferential strains, and the projected thickness of the workpiece. Through the equilibrium equation of the membrane stresses, the effect on the shape of the unsupported region of the workpiece, and hence the position of the critical section is explained. Then, the effect of draw-in on the four aspects of formability is discussed throughout this investigation. The triangular coordinate system is used to present and analyse the triaxial strains involved. This coordinate system has the advantage of showing all the three principal strains in a material simultaneously, as well as representing clearly the many types of strains involved in sheet metal work.

Increased diversity of libraries from libraries: chemoinformatic analysis of bis-diazacyclic libraries

Combinatorial libraries continue to play a key role in drug discovery. To increase structural diversity, several experimental methods have been developed. However, limited efforts have been performed so far to quantify the diversity of the broadly used diversity-oriented synthetic (DOS) libraries. Herein we report a comprehensive characterization of 15 bis-diazacyclic combinatorial libraries obtained through libraries from libraries, which is a DOS approach. Using MACCS keys, radial and different pharmacophoric fingerprints as well as six molecular properties, it was demonstrated the increased structural and property diversity of the libraries from libraries over the individual libraries. Comparison of the libraries to existing drugs, NCI Diversity and the Molecular Libraries Small Molecule Repository revealed the structural uniqueness of the combinatorial libraries (mean similarity < 0.5 for any fingerprint representation). In particular, bis-cyclic thiourea libraries were the most structurally dissimilar to drugs retaining drug-like character in property space. This study represents the first comprehensive quantification of the diversity of libraries from libraries providing a solid quantitative approach to compare and contrast the diversity of DOS libraries with existing drugs or any other compound collection.

The acquisition of French past tenses by tutored anglophone advanced learners : is aspect enough?

Following Andersen's (1986, 1991) study of untutored anglophone learners of Spanish, aspectual features have been at the centre of hypotheses on the development of past verbal morphology in language acquisition. The Primacy of Aspect Hypothesis claims that the association of any verb category (Aktionsart) with any aspect (perfective or imperfective) constitutes the endpoint of acquisition. However, its predictions rely on the observation of a limited number of untutored learners at the early stages of their acquisition, and have yet to be confirmed in other settings. The aim of the present thesis is to evaluate the explanatory power of the PAH in respect of the acquisition of French past tenses, an aspect of the language which constitutes a serious stumbling block for foreign learners, even those at the highest levels of proficiency (Coppieters 1987). The present research applies the PAH to the production of 61 anglophone 'advanced learners' (as defined in Bartning 1997) in a tutored environment. In so doing, it tests concurrent explanations, including the influence of the input, the influence of chunking, and the hypothesis of cyclic development. Finally, it discusses the cotextual and contextual factors that still provoke what Anderson (1991) terms "non-native glitches" at the final stage, as predicted by the PAH. The first part of the thesis provides the theoretical background to the corpus analysis. It opens with a diachronic presentation of the French past tense system focusing on present areas of competition and developments that emphasize the complexity of the system to be acquired. The concepts of time, grammatical aspect and lexical aspect (Aktionsart) are introduced and discussed in the second chapter, and a distinctive formal representation of the French past tenses is offered in the third chapter. The second part of the thesis is devoted to a corpus analysis. The data gathering procedures and the choice of tasks (oral and written film narratives based on Modern Times, cloze tests and acceptability judgement tests) are described and justified in the research methodology chapter. The research design was shaped by previous studies and consequently allows comparison with these. The second chapter is devoted to the narratives analysis and the third to the grammatical tasks. This section closes with a summary of discoveries and a comparison with previous results. The conclusion addresses the initial research questions in the light of both theory and practice. It shows that the PAH fails to account for the complex phenomenon of past tense development in the acquisitional settings under study, as it adopts a local (the verb phrase) and linear (steady progression towards native usage) approach. It is thus suggested that past tense acquisition rather follows a pendular development as learners reformulate their learning hypotheses and become increasingly able to shift from local to global cues and so to integrate the influence of cotext and context in their tense choice.

Thin film bearings with phase change of lubricant

The possible evaporation of lubricant in fluid film bearings has been investigated theoretically and by experiment using a radial flow hydrostatic bearing supplied with liquid refrigerant R114. Good correlation between measured and theoretical values was obtained using a bespoke computational fluid dynamic model in which the flow was assumed to be laminar and adiabatic. The effects of viscous dissipation and vapour generation within the fluid film are fully accounted for by applying a fourth order Runge-Kutta routine to satisfy the radial and filmwise transverse constraints of momentum, energy and mass conservation. The results indicate that the radial velocity profile remains parabolic while the flow remains in the liquid phase and that the radial rate of enthalpy generation is then constant across the film at a given radius. The results also show that evaporation will commence at a radial location determined by geometry and flow conditions and in fluid layers adjacent to the solid boundaries. Evaporation is shown to progress in the radial direction and the load carrying capacity of such a bearing is reduced significantly. Expressions for the viscosity of the liquid/vapour mixture found in the literature survey have not been tested against experimental data. A new formulation is proposed in which the suitable choice of a characteristic constant yields close representation to any of these expressions. Operating constraints imposed by the design of the experimental apparatus limited the extent of the surface over which evaporation could be obtained, and prevented clear identification of the most suitable relationship for the viscosity of the liquid/vapour mixture. The theoretical model was extended to examine the development of two phase flow in a rotating shaft face seal of uniform thickness. Previous theoretical analyses have been based on the assumption that the radial velocity profile of the flow is always parabolic, and that the tangential component of velocity varies linearly from the value at the rotating surface, to zero at the stationary surface. The computational fluid dynamic analysis shows that viscous shear and dissipation in the fluid adjacent to the rotating surface leads to developing evaporation with a consequent reduction in tangential shear forces. The tangential velocity profile is predicted to decay rapidly through the film, exhibiting a profile entirely different to that assumed by previous investigators. Progressive evaporation takes place close to the moving wall and does not occur completely at a single radial location, as has been claimed in earlier work.