Breeding for low input conditions and consequences for participatory plant breeding: Examples from tropical maize and wheat

Participatory plant breeding (PPB) has been suggested as an effective alternative to formal plant breeding (FPB) as a breeding strategy for achieving productivity gains under low input conditions. With genetic progress through PPB and FPB being determined by the same genetic variables, the likelihood of success of PPB approaches applied in low input target conditions was analyzed using two case studies from FPB that have resulted in significant productivity gains under low input conditions: (1) breeding tropical maize for low input conditions by CIMMYT, and (2) breeding of spring wheat for the highly variable low input rainfed farming systems in Australia. In both cases, genetic improvement was an outcome of long-term investment in a sustained research effort aimed at understanding the detail of the important environmental constraints to productivity and the plant requirements for improved adaptation to the identified constraints, followed up by the design and continued evaluation of efficient breeding strategies. The breeding strategies used differed between the two case studies but were consistent in their attention to the key determinants of response to selection: (1) ensuring adequate sources of genetic variation and high selection pressures for the important traits at all stages of the breeding program, (2) use of experimental procedures to achieve high levels of heritability in the breeding trials, and (3) testing strategies that achieved a high genetic correlation between performance of germplasm in the breeding trials and under on-farm conditions. The implications of the outcomes from these FPB case studies for realizing the positive motivations for adopting PPB strategies are discussed with particular reference for low input target environment conditions.

Post-fledging care, philopatry and recruitment in brown thornbills

1. We describe patterns of post-fledging care, dispersal and recruitment in four cohorts of brown thornbills Acanthiza pusilla. We examine what factors influence post-fledging survival and determine how post-hedging care and the timing of dispersal influence the probability of recruitment in this small, pair breeding, Australian passerine. 2. Fledgling thornbills were dependent on their parents for approximately 6 weeks. Male fledglings were more likely than female fledglings to survive until independence. For both sexes, the probability of reaching independence increased as nestling weight increased and was higher for nestlings that fledged later in the season. 3. The timing of dispersal by juvenile thornbills was bimodal. Juveniles either dispersed by the end of the breeding season or remained on their natal territory into the autumn and winter. Juveniles that delayed dispersal were four times more likely to recruit into the local breeding population than juveniles that dispersed early. 4. Delayed dispersal was advantageous because individuals that remained on their natal territory suffered little mortality and tended to disperse only when a local vacancy was available. Consequently, the risk of mortality associated with obtaining a breeding vacancy using this dispersal strategy was low. 5. Males, the more philopatric sex, were far more likely than females to delay dispersal. Despite the apparent advantages of prolonged natal philopatry, however, only 54% of pairs that raised male fledglings to independence had sons that postponed dispersal, and most of these philopatric sons gained vacancies before their parents bred again. Consequently, few sons have the opportunity to help their parents. Constraints on delayed dispersal therefore appear to play a major role in the evolution of pair-breeding in the brown thornbill.

Differentiation of peanut seedborne potyviruses and curcumoviruses by RT-PCR

Seedborne peanut viruses pose important constraints to peanut production and safe movement of germ plasm. They also pose a risk of accidental introduction into previously disease-free regions. We have developed reverse transcription-polymerase chain reaction (RT-PCR) assays based on identical cycling parameters which identified peanut stripe, Peanut mottle, Peanut stunt, and Cucumber mosaic viruses through production of specific DNA fragments of 234 bp, 327 bp, 390 bp, and 133 bp, respectively. Assay sensitivity in the picogram range was achieved. The two potyviruses and two cucumoviruses could be differentiated using duplex RT-PCR assays. These assays should be useful for testing peanut leaves or seeds for virus identification in epidemiological studies, seed testing or in post-entry quarantine.

An inverse design method for elliptical MRI magnets

An inverse, current density mapping (CDM) method has been developed for the design of elliptical cross-section MRI magnets. The method provides a rapid prototyping system for unusual magnet designs, as it generates a 3D current density in response to a set of target field and geometric constraints. The emphasis of this work is on the investigation of new elliptical coil structures for clinical MRI magnets. The effect of the elliptical aspect ratio on magnet performance is investigated. Viable designs are generated for symmetric, asymmetric and open architecture elliptical magnets using the new method. Clinically relevant attributes such as reduced stray field and large homogeneous regions relative to total magnet length are included in the design process and investigated in detail. The preliminary magnet designs have several novel features.

Compact clinical MRI magnet design using a multilayer current density approach

In this work, a new method of optimization is successfully applied to the theoretical design of compact, actively shielded, clinical MRI magnets. The problem is formulated as a two-step process in which the desired current densities on multiple, cc-axial surface layers are first calculated by solving Fredholm equations of the first kind. Non-linear optimization methods with inequality constraints are then invoked to fit practical magnet coils to the desired current densities. The current density approach allows rapid prototyping of unusual magnet designs. The emphasis of this work is on the optimal design of short, actively-shielded MRI magnets for whole-body imaging. Details of the hybrid numerical model are presented, and the model is used to investigate compact, symmetric, and asymmetric MRI magnets. Magnet designs are presented for actively-shielded, symmetric magnets of coil length 1.0 m, which is considerably shorter than currently available designs of comparable dsv size. Novel, actively-shielded, asymmetric magnet designs are also presented in which the beginning of a 50-cm dsv is positioned just 11 cm from the end of the coil structure, allowing much improved access to the patient and reduced patient claustrophobia. Magn Reson Med 45:331540, 2001. (C) 2001 Wiley-Liss, Inc.

Dispersal strategies in Tasmanian native hens (Gallinula mortierii)

Individuals in cooperatively breeding species face a complex set of decisions when they reach reproductive maturity. During an 8-year study, we examined the histories of 214 Tasmanian native hens (Gallinula mortierii) from hatching to examine the strategies they used to acquire breeding positions and the reproductive success they experienced in those breeding positions. Two-thirds of young delayed dispersal from their natal groups for at least a year. Ecological constraints were a partial cause of delayed dispersal; high-quality territories were rare and remained occupied due to high adult survivorship. There were also clear benefits of philopatry. Individuals that inherited breeding positions on their natal territories gained better quality positions and experienced higher reproductive success in their first breeding attempts than did individuals who dispersed to other groups. Multivariate analyses showed that the method of acquisition of breeding positions was the only factor significantly related to the quality of the breeding positions attained. Males were more likely to inherit breeding positions in their natal groups than were females. The compositions of individuals' natal groups had no effect on whether they inherited breeding positions or dispersed. In contrast, the compositions of groups did appear to affect whether other birds dispersed into them, with birds rarely moving into groups that contained breeders or nonbreeders of the same sex as the potential dispersers. Short-term removals of breeders confirmed this finding. These results suggest that both ecological constraints and benefits of philopatry explain delayed dispersal in this species.

Global distribution and genetic discontinuities of mangroves - emerging patterns in the evolution of Rhizophora

Mangroves are often described as a group of plants with common features and common origins based mostly on their broad distributional patterns, together with an erroneous view of comparable abilities in long-distance dispersal. However, whilst mangroves have common needs to adapt to rigorous environmental constraints associated with regular seawater inundation, individual taxa have developed different strategies and characteristics. Since mangroves are a genetically diverse group of mostly flowering plants, they may also have evolved at quite different geological periods, dispersed at different rates from different locations and developed different adaptive strategies. Current distributions of individual taxa show numerous instances of unusual extant distribution which demonstrate finite dispersal limitations, especially across open water. Our preliminary assessment of broad distribution and discontinuities reveals important patterns. Discontinuities, in the absence of current dispersal barriers, may be explained by persistent past barriers. As we learn more about discontinuities, we are beginning to appreciate their immense implications and what they might tell us about past geological conditions and how these might have influenced the distribution and evolution of mangroves. In this article, we describe emerging patterns in genetic relationships and distributions based on both current knowledge and preliminary results of our studies of molecular and morphometric characteristics of Rhizophora species in the Indo West Pacific region.

A formal model of real-time program compilation

Program compilation can be formally defined as a sequence of equivalence-preserving transformations, or refinements, from high-level language programs to assembler code, Recent models also incorporate timing properties, but the resulting formalisms are intimidatingly complex. Here we take advantage of a new, simple model of real-time refinement, based on predicate transformer semantics, to present a straightforward compilation formalism that incorporates real-time constraints. (C) 2002 Elsevier Science B.V. All rights reserved.

Factors affecting the rate of phosphocreatine resynthesis following intense exercise

Within the skeletal muscle cell at the onset of muscular contraction, phosphocreatine (PCr) represents the most immediate reserve for the rephosphorylation of adenosine triphosphate (ATP). As a result, its concentration can be reduced to less than 30% of resting levels during intense exercise. As a fall in the level of PCr appears to adversely affect muscle contraction, and therefore power output in a subsequent bout, maximising the rate of PCr resynthesis during a brief recovery period will be of benefit to an athlete involved in activities which demand intermittent exercise. Although this resynthesis process simply involves the rephosphorylation of creatine by aerobically produced ATP (with the release of protons), it has both a fast and slow component, each proceeding at a rate that is controlled by different components of the creatine kinase equilibrium. The initial fast phase appears to proceed at a rate independent of muscle pH. Instead, its rate appears to be controlled by adenosine diphosphate (ADP) levels; either directly through its free cytosolic concentration, or indirectly, through its effect on the free energy of ATP hydrolysis. Once this fast phase of recovery is complete, there is a secondary slower phase that appears almost certainly rate-dependant on the return of the muscle cell to homeostatic intracellular pH. Given the importance of oxidative phosphorylation in this resynthesis process, those individuals with an elevated aerobic power should be able to resynthesise PCr at a more rapid rate than their sedentary counterparts. However, results from studies that have used phosphorus nuclear magnetic resonance (P-31-NMR) spectroscopy, have been somewhat inconsistent with respect to the relationship between aerobic power and PCr recovery following intense exercise. Because of the methodological constraints that appear to have limited a number of these studies, further research in this area is warranted.

New W-isotope evidence for rapid terrestrial accretion and very early core formation

The short-lived Hf-182-W-182-isotope system is an ideal clock to trace core formation and accretion processes of planets. Planetary accretion and metal/silicate fractionation chronologies are calculated relative to the chondritic Hf-182-W-182-isotope evolution. Here, we report new high-precision W-isotope data for the carbonaceous chondrite Allende that are much less radiogenic than previously reported and are in good agreement with published internal Hf-W chronometry of enstatite chondrites. If the W-isotope composition of terrestrial rocks, representing the bulk silicate Earth, is homogeneous and 2.24 epsilon(182W) units more radiogenic than that of the bulk Earth, metal/silicate differentiation of the Earth occurred very early. The new W-isotope data constrain the mean time of terrestrial core formation to 34 million years after the start of solar system accretion. Early terrestrial core formation implies rapid terrestrial accretion, thus permitting formation of the Moon by giant impact while Hf-182 was still alive. This could explain why lunar W-isotopes are more radiogenic than the terrestrial value. Copyright (C) 2002 Elsevier Science Ltd.

Insights into collisional magmatism from isotopic fingerprints of melting reactions

Piston-cylinder experiments in the granite system demonstrate that a variety of isotopically distinct melts can arise from progressive melting of a single source. The relation between the isotopic composition of Sr and the stoichiometry of the observed melting reactions suggests that isotopic signatures of anatectic magmas can be used to infer melting reactions in natural systems. Our results also indicate that distinct episodes of dehydration and fluid-fluxed melting of a single, metapelitic source region may have contributed to the bimodal geochemistry of crustally derived leucogranites of the Himalayan orogen.

Ductile fabrics in the zone of active oblique convergence near the Alpine Fault, New Zealand: identifying the neotectonic overprint

The mid-crustal Alpine Schist in central Southern Alps, New Zealand has been exhumed during the past similar to3 m.y. on the hanging wall of the oblique-slip Alpine Fault. These rocks underwent ductile deformation during their passage through the similar to 150-km-wide Pacific-Australia plate boundary zone. Likely to be Cretaceous in age, peak metamorphism predates the largely Pliocene and younger oblique convergence that continues to uplift the Southern Alps today. Late Cenozoic ductile deformation constructively reinforced a pre-existing fabric that was well oriented to accommodate a dextral-transpressive overprint. Quartz microstructures below a recently exhumed brittle-ductile transition zone reflect a late Cenozoic increment of ductile strain that was distributed across deeper levels of the Pacific Plate. Deformation was transpressive, including a dextral-normal shear component that bends and rotates a delaminated panel of Pacific Plate crust onto the oblique footwall ramp of the Alpine Fault. Progressive ductile shear in mylonites at the base of the Pacific Plate overprints earlier fabrics in a dextral-reverse sense, a deformation that accompanies translation of the schists up the Alpine Fault. Ductile shear along that structure affects not only the 12-km-thick section of Alpine mylonites, but is distributed across several kilometres of overlying nonmylonitic rocks. (C) 2001 Elsevier Science Ltd. All rights reserved.

Attitudes and practices of general practitioners in the diagnosis and management of attention-deficit/hyperactivity disorder

Objective: To assess understanding of, and actual and potential roles in management of attention-deficit/hyperactivity disorder (ADHD) among GPs. Methods: A cross-sectional questionnaire survey of Queensland GPs selected randomly from the Royal Australian College of General Practitioners directory of members was carried out. Main outcome measures were knowledge levels of ADHD, current management practices, referral patterns and self-perceived information and training needs. Results: Three hundred and ninety-nine GPs returned a completed questionnaire (response rate 76%). Roles identified by GPs were: the provisional diagnosis of ADHD and referral to specialist services for confirmation of the diagnosis and initiation of management; assistance with monitoring progress once a management plan was in place; education of the child and their family regarding the disorder; and liaison with the school where necessary. Perceived barriers to increased involvement of GPs were: time and resource constraints of general practice; concerns regarding abuse and addiction liability of prescription stimulants; complex diagnostic issues associated with childhood behavioural problems; and lack of training and education regarding ADHD. Conclusions: General practitioners identify a role for themselves in ADHD care that is largely supportive in nature and involves close liaison with specialist services.

Rapid field calculations for the effect of ferromagnetic material in MRI magnet design

Magnetic resonance imaging (MRI) magnets have very stringent constraints on the homogeneity of the static magnetic field that they generate over desired imaging regions. The magnet system also preferably generates very little stray field external to its structure, so that ease of siting and safety are assured. This work concentrates on deriving, means of rapidly computing the effect of 'cold' and 'warm' ferromagnetic material in or around the superconducting magnet system, so as to facilitate the automated design of hybrid material MR magnets. A complete scheme for the direct calculation of the spherical harmonics of the magnetic field generated by a circular ring of ferromagnetic material is derived under the conditions of arbitrary external magnetizing fields. The magnetic field produced by the superconducting coils in the system is computed using previously developed methods. The final, hybrid algorithm is fast enough for use in large-scale optimization methods. The resultant fields from a practical example of a 4 T, clinical MRI magnet containing both superconducting coils and magnetic material are presented.