Chewing time and chewing strokes in different dentofacial deformities

PURPOSE: To verify whether the number of chewing strokes and the chewing time are influenced by dentofacial deformities in habitual free mastication. METHODS: Participants were 15 patients with diagnosis of class II dentofacial deformity (GII), 15 with class III (GIII), and 15 healthy control individuals with no deformity (CG). Free habitual mastication of a cornstarch cookie was analyzed, considering the number of chewing strokes and the time needed to complete two mastications. Strokes were counted by considering the opening and closing movements of the mandible. The time needed to consume each bite was determined using a digital chronometer, started after the placement of the food in the oral cavity and stopped when each portion was swallowed. RESULTS: There were no differences between groups regarding both the number of strokes and the chewing time. However, with regards to the number of strokes, CG and GII presented a significant concordance between the first and the second chewing situation, which was not observed in GIII. The analysis of time showed significant concordance between the first and second chewing situation in CG, reasonable concordance in GII, and discordance in GIII. CONCLUSION: Dentofacial deformities do not influence the number of chewing strokes or the chewing time. However, class III individuals do not show uniformity regarding these aspects.

Actualización, consolidación, migración y contingencia de un entorno hardware y software para la gestión de bases de datos

[ES]El objetivo de este Trabajo es el de actualizar un entorno de gestión de bases de datos existente a la versión 11.2 del software de bases de datos Oracle y a una plataforma hardware de última generación. Se migran con tiempo de parada cero varias bases de datos dispersas en distintos servidores a un entorno consolidado de dos nodos dispuestos en alta disponibilidad tipo "activo-activo" mediante Oracle RAC y respaldado por un entorno de contingencia totalmente independiente y sincronizado en tiempo real mediante Oracle GoldenGate. Se realiza un estudio del entorno actual y, realizando una estimación de crecimiento, se propone una configuración de hardware y software mínima para implementar con garantías de éxito los requerimientos del entorno de gestión de bases de datos a corto y medio plazo. Una vez adquirido el hardware, se lleva a cabo la instalación, actualización y configuración del Sistema Operativo y el acceso redundado de los servidores a la cabina de almacenamiento. Posteriormente se instala el software de clúster de Oracle, el software de la base de datos y se crea una instancia que albergará los esquemas requeridos de las bases de datos a consolidar. Seguidamente se migran los esquemas al entorno consolidado y se establece la replicación de éstos en tiempo real con la máquina de contingencia usando en ambos casos Oracle GoldenGate. Finalmente se crea y prueba un esquema de copias de seguridad que incluye copias lógicas y físicas de la propia base de datos y de archivos de configuración del clúster a partir de los cuales será posible restaurar el entorno completamente.

Evolutionary methods for self-organizing cooperation in peer-to-peer networks

The Peer-to-Peer network paradigm is drawing the attention of both final users and researchers for its features. P2P networks shift from the classic client-server approach to a high level of decentralization where there is no central control and all the nodes should be able not only to require services, but to provide them to other peers as well. While on one hand such high level of decentralization might lead to interesting properties like scalability and fault tolerance, on the other hand it implies many new problems to deal with. A key feature of many P2P systems is openness, meaning that everybody is potentially able to join a network with no need for subscription or payment systems. The combination of openness and lack of central control makes it feasible for a user to free-ride, that is to increase its own benefit by using services without allocating resources to satisfy other peers’ requests. One of the main goals when designing a P2P system is therefore to achieve cooperation between users. Given the nature of P2P systems based on simple local interactions of many peers having partial knowledge of the whole system, an interesting way to achieve desired properties on a system scale might consist in obtaining them as emergent properties of the many interactions occurring at local node level. Two methods are typically used to face the problem of cooperation in P2P networks: 1) engineering emergent properties when designing the protocol; 2) study the system as a game and apply Game Theory techniques, especially to find Nash Equilibria in the game and to reach them making the system stable against possible deviant behaviors. In this work we present an evolutionary framework to enforce cooperative behaviour in P2P networks that is alternative to both the methods mentioned above. Our approach is based on an evolutionary algorithm inspired by computational sociology and evolutionary game theory, consisting in having each peer periodically trying to copy another peer which is performing better. The proposed algorithms, called SLAC and SLACER, draw inspiration from tag systems originated in computational sociology, the main idea behind the algorithm consists in having low performance nodes copying high performance ones. The algorithm is run locally by every node and leads to an evolution of the network both from the topology and from the nodes’ strategy point of view. Initial tests with a simple Prisoners’ Dilemma application show how SLAC is able to bring the network to a state of high cooperation independently from the initial network conditions. Interesting results are obtained when studying the effect of cheating nodes on SLAC algorithm. In fact in some cases selfish nodes rationally exploiting the system for their own benefit can actually improve system performance from the cooperation formation point of view. The final step is to apply our results to more realistic scenarios. We put our efforts in studying and improving the BitTorrent protocol. BitTorrent was chosen not only for its popularity but because it has many points in common with SLAC and SLACER algorithms, ranging from the game theoretical inspiration (tit-for-tat-like mechanism) to the swarms topology. We discovered fairness, meant as ratio between uploaded and downloaded data, to be a weakness of the original BitTorrent protocol and we drew inspiration from the knowledge of cooperation formation and maintenance mechanism derived from the development and analysis of SLAC and SLACER, to improve fairness and tackle freeriding and cheating in BitTorrent. We produced an extension of BitTorrent called BitFair that has been evaluated through simulation and has shown the abilities of enforcing fairness and tackling free-riding and cheating nodes.

Progetto di reti Sensori Wireless e tecniche di Fusione Sensoriale

Ambient Intelligence (AmI) envisions a world where smart, electronic environments are aware and responsive to their context. People moving into these settings engage many computational devices and systems simultaneously even if they are not aware of their presence. AmI stems from the convergence of three key technologies: ubiquitous computing, ubiquitous communication and natural interfaces. The dependence on a large amount of fixed and mobile sensors embedded into the environment makes of Wireless Sensor Networks one of the most relevant enabling technologies for AmI. WSN are complex systems made up of a number of sensor nodes, simple devices that typically embed a low power computational unit (microcontrollers, FPGAs etc.), a wireless communication unit, one or more sensors and a some form of energy supply (either batteries or energy scavenger modules). Low-cost, low-computational power, low energy consumption and small size are characteristics that must be taken into consideration when designing and dealing with WSNs. In order to handle the large amount of data generated by a WSN several multi sensor data fusion techniques have been developed. The aim of multisensor data fusion is to combine data to achieve better accuracy and inferences than could be achieved by the use of a single sensor alone. In this dissertation we present our results in building several AmI applications suitable for a WSN implementation. The work can be divided into two main areas: Multimodal Surveillance and Activity Recognition. Novel techniques to handle data from a network of low-cost, low-power Pyroelectric InfraRed (PIR) sensors are presented. Such techniques allow the detection of the number of people moving in the environment, their direction of movement and their position. We discuss how a mesh of PIR sensors can be integrated with a video surveillance system to increase its performance in people tracking. Furthermore we embed a PIR sensor within the design of a Wireless Video Sensor Node (WVSN) to extend its lifetime. Activity recognition is a fundamental block in natural interfaces. A challenging objective is to design an activity recognition system that is able to exploit a redundant but unreliable WSN. We present our activity in building a novel activity recognition architecture for such a dynamic system. The architecture has a hierarchical structure where simple nodes performs gesture classification and a high level meta classifiers fuses a changing number of classifier outputs. We demonstrate the benefit of such architecture in terms of increased recognition performance, and fault and noise robustness. Furthermore we show how we can extend network lifetime by performing a performance-power trade-off. Smart objects can enhance user experience within smart environments. We present our work in extending the capabilities of the Smart Micrel Cube (SMCube), a smart object used as tangible interface within a tangible computing framework, through the development of a gesture recognition algorithm suitable for this limited computational power device. Finally the development of activity recognition techniques can greatly benefit from the availability of shared dataset. We report our experience in building a dataset for activity recognition. Such dataset is freely available to the scientific community for research purposes and can be used as a testbench for developing, testing and comparing different activity recognition techniques.

Riabilitazione protesica ed implanto-protesica di pazienti in età evolutiva affetti da Displasia Ectodermica

Introduction. Ectodermal Dysplasias are a heterogeneous group of inherited disorders characterized by dysplasia of tissues of ectodermal origin (hair, nails, teeth, skins and glands). Clinically, it may be divided into two broad categories: the X-linked hypoidrotic form and the hidrotic form. Hypohidrotic Ectodermal Dysplasia (H.E.D) is characterized by the triad oligo-anodontia, hypotricosis, hypo-anhydrosis (Christ-Siemens-Tourane syndrome). The incidence of HED is about 1/100,000. Mutation in the actodysplasin-A (EDA) and ectodysplasin-A receptor (EDAR) genes are responsible for X-linked and autosomal HED. The clinical features include sparse, fine hair, missing or conical-shaped teeth, decreased sweat and mucous glands, hypoplastic skin, and heat intolerance with exercise or increased ambient temperature. Complete or partial anodontia and malformation of teeth are the most frequent dental findings. Incisors and canines are often conical-shaped while primarily second molars, if present, are mostly affected by taurodontism. Treatment is supportive and includes protection from heat exposure, early prosthetic rehabilitation, skin, hair ear, nose and nail care, and genetic counseling for family planning. The diagnosis of HED in the neonatal and early infancy period may be difficult since sparse hair and absent teeth are normal finding at this age. In childhood the diagnosis is more easily made on the basis of history and clinical examination. Dental abnormalities are the most common complaint. Prosthetic rehabilitation has been recommended as an essential part of the management of HED because is important from functional, esthetic, and psychological standpoint. A team approach that includes input from a pediatric dentist, an orthodontist, a prosthodontist, and an oral and maxillofacial surgeon is necessary for a successful outcome. Conventional prosthodontic rehabilitation in young patient is often difficult because of the anatomical abnormalities of existing teeth and alveolar ridges. The conical shaped teeth and “knife-edge” alveolar ridges result in poor retention and instability of dentures. Moreover, denture must permit jaws expansion and a correct pattern of growth. Materials and Methods. Complete removable dentures were provided to allow for normal physiological development and a corrected masticatory function. Initial maxillary and mandibular impressions were made with smallest stock trays and irreversible hydrocolloid and then final impressions ware made with light-bodied polysulfide rubber base impression material. A base of autopolymerizing resin was constructed and a wax rim was added to the base. The patient’s vertical dimension of occlusion was established by assessing phonetic and esthetic criteria. Preliminary occlusal relations were recorded, and the mandibular cast was mounted on the articulator. Acrylic resin teeth specific for children dentures were selected and mounted. The dentures were tried in and, after proper adjustments, were inserted. The patients were monitored clinically every month to fit prostheses. Cephalometric radiographs were taken every 6 month with the prostheses in place in order to evaluate correct pattern of growth. Cephalometric measurements were realized and used to evaluate the effect of rehabilitation on craniofacial growth. Cephalometric measurements of sound patients were compared with ED patients. After two month expander screws (three-way screw in the upper denture and two-way the lower one)were inserted in each denture in order to permit the expansion of the denture and the jaws growth. Where conical teeth were present, composite crown were realized and luted to improve the esthetic and phonesis. In order to improve retention the placement of endosseous implants was carried out. TC 3D Accuitomo was performed and a resin model of mandibular bone of the patient was realized. At the age of 11 years two implants were inserted into anterior mandible in a child with anodontia. Despite a remarkable multi-dimensional atrophy of the mandibular alveolar process, the insertion of two tapered screw implants (SAMO Smiler, diameter 3.8, length 10 mm). After a submerged healing period of two-three month, the implants were exposed. Implants were connected with an expansion guide that permits mandibular growth and prosthetic retention. The amount of mandibular growth was also evaluate dusing the expansion guide. Results. Early oral rehabilitation improve oral function, phonesis and esthetic, reducing social impairment. Treated patients showed normal cephalometric measurement. Early rehabilitation is able to prevent the prognatissm of the mandibula . The number of teeth was significantly related to several changes in craniofacial morphology. Discussion. In the present study the 5,3% of ED patients showed hypodontia, the l’89,4% di oligodontia, and the 5,3% di anodontia. The cephalometric analysis supports that ED patients showed midface hypoplasia. ED groups showed an increased pogonion to nasion measurement than sound patients, indicative of class III tendency. The present study demonstrated that number of teeth was significantly correlated with deviation of cephalometric measurements from normality. Oligoanodontia is responsible for changing of cephalometric measuraments also on sagittal plane with a class III tendency. Maxillary jaw showed a retrused position related to the presence of hypodontia.

Zu den chemischen Eigenschaften von Rutherfordium, Dubnium und Seaborgium

Die künstlichen Elemente Rutherfordium, Dubnium und Seaborgium werden an Schwerionenbeschleunigern erzeugt. Ihre chemische Untersuchung erfolgt mit computergesteuerten Apparaturen, z.B. ARCA (Automated Rapid Chemistry Apparatus). Ziel der Untersuchungen ist die Einordnung derElemente ins Periodensystem. Im einzelnen beschreibt die vorliegende Arbeit Experimente zur Fluorid- und Chlorid-Komplexierung von Rutherfordium und Dubnium, zum ionischen Zustand von Seaborgium in Nitratlösungen, zur Komplexierung von Seaborgium mit alpha-HIB sowie Vorexperimente zur Reduktion von Seaborgium.

Sistemi riconfigurabili a basso consumo per applicazioni di monitoraggio distribuito

The term Ambient Intelligence (AmI) refers to a vision on the future of the information society where smart, electronic environment are sensitive and responsive to the presence of people and their activities (Context awareness). In an ambient intelligence world, devices work in concert to support people in carrying out their everyday life activities, tasks and rituals in an easy, natural way using information and intelligence that is hidden in the network connecting these devices. This promotes the creation of pervasive environments improving the quality of life of the occupants and enhancing the human experience. AmI stems from the convergence of three key technologies: ubiquitous computing, ubiquitous communication and natural interfaces. Ambient intelligent systems are heterogeneous and require an excellent cooperation between several hardware/software technologies and disciplines, including signal processing, networking and protocols, embedded systems, information management, and distributed algorithms. Since a large amount of fixed and mobile sensors embedded is deployed into the environment, the Wireless Sensor Networks is one of the most relevant enabling technologies for AmI. WSN are complex systems made up of a number of sensor nodes which can be deployed in a target area to sense physical phenomena and communicate with other nodes and base stations. These simple devices typically embed a low power computational unit (microcontrollers, FPGAs etc.), a wireless communication unit, one or more sensors and a some form of energy supply (either batteries or energy scavenger modules). WNS promises of revolutionizing the interactions between the real physical worlds and human beings. Low-cost, low-computational power, low energy consumption and small size are characteristics that must be taken into consideration when designing and dealing with WSNs. To fully exploit the potential of distributed sensing approaches, a set of challengesmust be addressed. Sensor nodes are inherently resource-constrained systems with very low power consumption and small size requirements which enables than to reduce the interference on the physical phenomena sensed and to allow easy and low-cost deployment. They have limited processing speed,storage capacity and communication bandwidth that must be efficiently used to increase the degree of local ”understanding” of the observed phenomena. A particular case of sensor nodes are video sensors. This topic holds strong interest for a wide range of contexts such as military, security, robotics and most recently consumer applications. Vision sensors are extremely effective for medium to long-range sensing because vision provides rich information to human operators. However, image sensors generate a huge amount of data, whichmust be heavily processed before it is transmitted due to the scarce bandwidth capability of radio interfaces. In particular, in video-surveillance, it has been shown that source-side compression is mandatory due to limited bandwidth and delay constraints. Moreover, there is an ample opportunity for performing higher-level processing functions, such as object recognition that has the potential to drastically reduce the required bandwidth (e.g. by transmitting compressed images only when something ‘interesting‘ is detected). The energy cost of image processing must however be carefully minimized. Imaging could play and plays an important role in sensing devices for ambient intelligence. Computer vision can for instance be used for recognising persons and objects and recognising behaviour such as illness and rioting. Having a wireless camera as a camera mote opens the way for distributed scene analysis. More eyes see more than one and a camera system that can observe a scene from multiple directions would be able to overcome occlusion problems and could describe objects in their true 3D appearance. In real-time, these approaches are a recently opened field of research. In this thesis we pay attention to the realities of hardware/software technologies and the design needed to realize systems for distributed monitoring, attempting to propose solutions on open issues and filling the gap between AmI scenarios and hardware reality. The physical implementation of an individual wireless node is constrained by three important metrics which are outlined below. Despite that the design of the sensor network and its sensor nodes is strictly application dependent, a number of constraints should almost always be considered. Among them: • Small form factor to reduce nodes intrusiveness. • Low power consumption to reduce battery size and to extend nodes lifetime. • Low cost for a widespread diffusion. These limitations typically result in the adoption of low power, low cost devices such as low powermicrocontrollers with few kilobytes of RAMand tenth of kilobytes of program memory with whomonly simple data processing algorithms can be implemented. However the overall computational power of the WNS can be very large since the network presents a high degree of parallelism that can be exploited through the adoption of ad-hoc techniques. Furthermore through the fusion of information from the dense mesh of sensors even complex phenomena can be monitored. In this dissertation we present our results in building several AmI applications suitable for a WSN implementation. The work can be divided into two main areas:Low Power Video Sensor Node and Video Processing Alghoritm and Multimodal Surveillance . Low Power Video Sensor Nodes and Video Processing Alghoritms In comparison to scalar sensors, such as temperature, pressure, humidity, velocity, and acceleration sensors, vision sensors generate much higher bandwidth data due to the two-dimensional nature of their pixel array. We have tackled all the constraints listed above and have proposed solutions to overcome the current WSNlimits for Video sensor node. We have designed and developed wireless video sensor nodes focusing on the small size and the flexibility of reuse in different applications. The video nodes target a different design point: the portability (on-board power supply, wireless communication), a scanty power budget (500mW),while still providing a prominent level of intelligence, namely sophisticated classification algorithmand high level of reconfigurability. We developed two different video sensor node: The device architecture of the first one is based on a low-cost low-power FPGA+microcontroller system-on-chip. The second one is based on ARM9 processor. Both systems designed within the above mentioned power envelope could operate in a continuous fashion with Li-Polymer battery pack and solar panel. Novel low power low cost video sensor nodes which, in contrast to sensors that just watch the world, are capable of comprehending the perceived information in order to interpret it locally, are presented. Featuring such intelligence, these nodes would be able to cope with such tasks as recognition of unattended bags in airports, persons carrying potentially dangerous objects, etc.,which normally require a human operator. Vision algorithms for object detection, acquisition like human detection with Support Vector Machine (SVM) classification and abandoned/removed object detection are implemented, described and illustrated on real world data. Multimodal surveillance: In several setup the use of wired video cameras may not be possible. For this reason building an energy efficient wireless vision network for monitoring and surveillance is one of the major efforts in the sensor network community. Energy efficiency for wireless smart camera networks is one of the major efforts in distributed monitoring and surveillance community. For this reason, building an energy efficient wireless vision network for monitoring and surveillance is one of the major efforts in the sensor network community. The Pyroelectric Infra-Red (PIR) sensors have been used to extend the lifetime of a solar-powered video sensor node by providing an energy level dependent trigger to the video camera and the wireless module. Such approach has shown to be able to extend node lifetime and possibly result in continuous operation of the node.Being low-cost, passive (thus low-power) and presenting a limited form factor, PIR sensors are well suited for WSN applications. Moreover techniques to have aggressive power management policies are essential for achieving long-termoperating on standalone distributed cameras needed to improve the power consumption. We have used an adaptive controller like Model Predictive Control (MPC) to help the system to improve the performances outperforming naive power management policies.

Tecniche MonteCarlo per l'analisi di sistemi a rete

The assessment of the RAMS (Reliability, Availability, Maintainability and Safety) performances of system generally includes the evaluations of the “Importance” of its components and/or of the basic parameters of the model through the use of the Importance Measures. The analytical equations proposed in this study allow the estimation of the first order Differential Importance Measure on the basis of the Birnbaum measures of components, under the hypothesis of uniform percentage changes of parameters. The aging phenomena are introduced into the model by assuming exponential-linear or Weibull distributions for the failure probabilities. An algorithm based on a combination of MonteCarlo simulation and Cellular Automata is applied in order to evaluate the performance of a networked system, made up of source nodes, user nodes and directed edges subjected to failure and repair. Importance Sampling techniques are used for the estimation of the first and total order Differential Importance Measures through only one simulation of the system “operational life”. All the output variables are computed contemporaneously on the basis of the same sequence of the involved components, event types (failure or repair) and transition times. The failure/repair probabilities are forced to be the same for all components; the transition times are sampled from the unbiased probability distributions or it can be also forced, for instance, by assuring the occurrence of at least a failure within the system operational life. The algorithm allows considering different types of maintenance actions: corrective maintenance that can be performed either immediately upon the component failure or upon finding that the component has failed for hidden failures that are not detected until an inspection; and preventive maintenance, that can be performed upon a fixed interval. It is possible to use a restoration factor to determine the age of the component after a repair or any other maintenance action.

Cooperative Wireless Systems

This Ph.D. dissertation reports on the work performed at the Wireless Communication Laboratory - University of Bologna and National Research Council - as well as, for six months, at the Fraunhofer Institute for Integrated Circuit (IIS) in Nürnberg. The work of this thesis is in the area of wireless communications, especially with regards to cooperative communications aspects in narrow-band and ultra-wideband systems, cooperative links characterization, network geometry, power allocation techniques,and synchronization between nodes. The underpinning of this work is devoted to developing a general framework for design and analysis of wireless cooperative communication systems, which depends on propagation environment, transmission technique, diversity method, power allocation for various scenarios and relay positions. The optimal power allocation for minimizing the bit error probability at the destination is derived. In addition, a syncronization algorithm for master-slave communications is proposed with the aim of jointly compensate the clock drift and offset of wireless nodes composing the network.

Le reologia dei leganti bituminosi stradali: studio delle proprietà meccaniche a seguito di processi di “aging” in laboratorio

Lo studio effettuato pone le sue basi sulla ricerca di materiali stradali che combinino ad elevati standard prestazionali, la riduzione dell’impatto ambientale in fase realizzativa e manutentiva. In particolare il seguente lavoro si occupa dello studio di 7 leganti modificati con polimeri ed additivati con cere. I primi infatti conferiscono alla miscela maggiore elastoplasticità, incrementandone la durabilità e la resistenza a fatica. Nei secondi la presenza del materiale paraffinico contribuisce a ridurre la viscosità del bitume, consentendo un notevole abbassamento della temperatura di produzione e stesa della miscela. Numerosi studi hanno dimostrato che le caratteristiche meccaniche della pavimentazione sono fortemente influenzate dal grado di ossidazione delle componenti organiche del bitume, ovvero dal fenomeno dell’invecchiamento o aging. Pertanto allo studio reologico del bitume, si sono affiancate prove di simulazione dell’ invecchiamento nel breve e lungo termine. In fase di ricerca sperimentale si sono analizzati i leganti modificati ed additivati secondo la teoria della viscoelasticità, simulando le reali condizioni di carico ed invecchiamento alle quali il bitume è sottoposto. Tutte le prove di caratterizzazione reologica avanzata sono state effettuate mediante l’utilizzo del DSR (Dynamic Shear Rheometer - UNI EN 14770 ) in varie configurazioni di prova e l’invecchiamento a breve termine è stato simulato mediante RTFOT (Rolling thin film oven test -UNI EN 12607-1). Si è proposto inoltre una nuova procedura di aging invecchiando il bitume alla temperatura di Twork, ovvero a quel valore della temperatura tale per cui, in fase di messa in opera, si avrà una distribuzione molecolare omogenea del modificante all’interno del bitume.

Nuove tecniche per il trattamento della malattia paranale di Crohn

Studio prospettico su 75 pazienti con malattia paranale di Crohn che ha come obiettivo quello di confrontare i risultati tra le nuove terapie medico-chirurgiche emergenti. La prima procedura è comune a tutti i pazienti e consiste in un intervento di incisione degli ascessi, fistulectomia e posizionamento di setoni di drenaggio nei tramiti fistolosi per il controllo della sepsi.Successivamente i pazienti vengono divisi in cinque gruppi e sottoposti ai trattamenti per la chiusura dei tramiti fistolosi: terapia sistemica con Infliximab,terapia sistemica con Adalimumab,confezionamento di Flap endoanale, instillazione di colla di fibrina o posizionamento di protesi biologiche. Abbiamo osservato una chiusura completa dei tramiti fistolosi nel 60% dei pazienti trattati con Infliximab, 53% di quelli trattati con Adalimumab, 40% di quelli in terapia con colla di fibrina, 80% di quelli sottoposti a Flap endoanale e 60% di quelli trattati con protesi biologiche. Gli ottimi risultati raggiunti in con le diverse metodiche di trattamento chirurgico locale rappresentano una valida alternativa alla terapia con farmaci biologici. Tali nuove metodiche risultano anzi fondamentali per il trattamento di quei pazienti che dopo una terapia con farmaci biologici non hanno raggiunto una completa risoluzione del quadro (rescue therapy). Terapia biologica e nuove tecniche chirurgiche risultano pertanto complementari, la prima contribuendo al miglioramento della qualità della mucosa del canale anale e del retto basso sulla quale risulta quindi più agevole agire con le seconde con una percentuale di successo sempre maggiore.

Heterogeneous Multi-core Architectures for High Performance Computing

This thesis deals with heterogeneous architectures in standard workstations. Heterogeneous architectures represent an appealing alternative to traditional supercomputers because they are based on commodity components fabricated in large quantities. Hence their price-performance ratio is unparalleled in the world of high performance computing (HPC). In particular, different aspects related to the performance and consumption of heterogeneous architectures have been explored. The thesis initially focuses on an efficient implementation of a parallel application, where the execution time is dominated by an high number of floating point instructions. Then the thesis touches the central problem of efficient management of power peaks in heterogeneous computing systems. Finally it discusses a memory-bounded problem, where the execution time is dominated by the memory latency. Specifically, the following main contributions have been carried out: A novel framework for the design and analysis of solar field for Central Receiver Systems (CRS) has been developed. The implementation based on desktop workstation equipped with multiple Graphics Processing Units (GPUs) is motivated by the need to have an accurate and fast simulation environment for studying mirror imperfection and non-planar geometries. Secondly, a power-aware scheduling algorithm on heterogeneous CPU-GPU architectures, based on an efficient distribution of the computing workload to the resources, has been realized. The scheduler manages the resources of several computing nodes with a view to reducing the peak power. The two main contributions of this work follow: the approach reduces the supply cost due to high peak power whilst having negligible impact on the parallelism of computational nodes. from another point of view the developed model allows designer to increase the number of cores without increasing the capacity of the power supply unit. Finally, an implementation for efficient graph exploration on reconfigurable architectures is presented. The purpose is to accelerate graph exploration, reducing the number of random memory accesses.

Strumenti finanziari partecipativi e "nuovi" canali di finanziamento delle societa' per azioni

Il lavoro affronta il tema degli strumenti finanziari partecipativi e non partecipativi che possono essere emessi dalle società per azioni, alla luce della disciplina introdotta dalla riforma del diritto societario. Lo studio è diretto a fornire un inquadramento sistematico di queste modalità di finanziamento rispetto alla dicotomia azioni-obbligazioni, anche sotto il profilo contabile, per poi individuare le conseguenti implicazioni in termini di disciplina applicabile. Affrontando il dibattito dottrinale sulla collocazione complessiva degli strumenti ibridi rispetto alle forme di finanziamento tradizionali, si sposa l’opinione secondo cui tutti gli strumenti finanziari non possono essere ricompresi in una categoria unitaria, ma occorre mantenere distinti gli strumenti finanziari partecipativi indicati dall’art. 2346, comma 6, c.c., dagli altri strumenti finanziari ex art. 2411, comma 3, c.c., riconoscendo nei primi delle modalità di raccolta assimilabili al capitale di rischio e nei secondi delle forme di provvista di capitale di debito. Il connotato distintivo tra strumenti finanziari partecipativi e non partecipativi viene individuato non nell’attribuzione di diritti amministrativi – che possono anche non essere assegnati ai titolari di strumenti di cui all’art. 2346, comma 6 – bensì nell’assenza o nella presenza di un obbligo di rimborso dell’apporto fornito all’impresa. Il lavoro esamina inoltre vari profili di disciplina di entrambe le categorie di strumenti, concentrandosi prevalentemente sui diritti patrimoniali ad essi attribuibili, tra cui la partecipazione agli utili e alle perdite e i diritti in sede di liquidazione. Infine si esaminano le previsioni recentemente introdotte dal d.l. n. 83/2012 in tema di titoli obbligazionari, al fine di valutarne l’impatto sull’impianto complessivo della disciplina vigente. In particolare, viene data attenzione alle nuove disposizioni relative alle obbligazioni subordinate e/o partecipative che possono essere emesse dalle società non quotate, mettendo in evidenza le criticità dal punto di vista sistematico in tema di possibile partecipazione agli utili degli obbligazionisti.

Mac protocols for linear wireless (sensor) networks

Wireless sensor networks (WSNs) consist of a large number of sensor nodes, characterized by low power constraint, limited transmission range and limited computational capabilities [1][2].The cost of these devices is constantly decreasing, making it possible to use a large number of sensor devices in a wide array of commercial, environmental, military, and healthcare fields. Some of these applications involve placing the sensors evenly spaced on a straight line for example in roads, bridges, tunnels, water catchments and water pipelines, city drainages, oil and gas pipelines etc., making a special class of these networks which we define as a Linear Wireless Network (LWN). In LWNs, data transmission happens hop by hop from the source to the destination, through a route composed of multiple relays. The peculiarity of the topology of LWNs, motivates the design of specialized protocols, taking advantage of the linearity of such networks, in order to increase reliability, communication efficiency, energy savings, network lifetime and to minimize the end-to-end delay [3]. In this thesis a novel contention based Medium Access Control (MAC) protocol called L-CSMA, specifically devised for LWNs is presented. The basic idea of L-CSMA is to assign different priorities to nodes based on their position along the line. The priority is assigned in terms of sensing duration, whereby nodes closer to the destination are assigned shorter sensing time compared to the rest of the nodes and hence higher priority. This mechanism speeds up the transmission of packets which are already in the path, making transmission flow more efficient. Using NS-3 simulator, the performance of L-CSMA in terms of packets success rate, that is, the percentage of packets that reach destination, and throughput are compared with that of IEEE 802.15.4 MAC protocol, de-facto standard for wireless sensor networks. In general, L-CSMA outperforms the IEEE 802.15.4 MAC protocol.

Traduttori specializzati e business center nel processo di internazionalizzazione d'impresa: Studio esplorativo e prospettive future

This exploratory study aims at investigating the professional opportunities available to a specialised translator within the process of international business development. Firstly, the analysis focuses on a review of the theoretical principles affirming the need of a fine-tuned language strategy, especially in the process of internationalization, managed by professionals with translation, language and cultural skills. Against this background, the focus is on the role played by a specialised translator within this process. With the aim of exploring the translator’s role within this process, the analysis focuses on business centers in Italy, which bring together demand and supply of language services and services for company internationalisation. According to the results that shows the opportunities available to a specialised translator with extra skills, the analysis focuses on the placement of this professional within the process. A specialised translator can be a language and cultural consultant for the internationalised company, as well as a Project Manager working for its international development. The conclusions describe the role which a specialised translator with economic or international marketing skills might play within this framework, and pave the way for future developments of this analysis.