Monitoring of hydrogen sulfide via substrate-integrated hollow waveguide mid-infrared sensors in real-time

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A castor oil-containing dental luting agent: effects of cyclic loading and storage time on flexural strength

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Contaminação das águas subterrâneas por resíduos de postos de combustíveis: uma abordagem no município de Rio Claro

The contamination of underground waters is a subject of great importance, since a lot of people use this kind of source for public supply. This paperwork manages with how gas stations can contaminate these waters and what are some remediation techniques, used nowadays to solve this problem. The contamination caused by the gas stations can have its origin in the underground storage tanks when they suffer corrosion and show leaking problems. It’s a topic of great relevance, because the hydrocarbons derivated from petroleum present in the fuels can stay for a long time in the environment. Besides that, an analyses of the risk of contamination by gas stations in the city of Rio Claro was made based on three parameters: density of the gas stations, depth of the underground water and hydraulic conductivity. To achieve such goal, maps were elaborated considering those parameters individually and considering the three of them together. Analyzing those maps, it was concluded see that the spots that represent the biggest risks of contamination in Rio Claro are located southeast and center-west.

Estudo de comunidades de foraminíferos em manguezal do Rio Itapanhaú, Bertioga-SP, aplicado à reconstrução paleoambiental

Foraminifera scientific studies became, historically, of your apply in relative dating of rocks, stratigraphic correlations and paleoenvironmental reconstruction. In the last decades, they have been applied on the studies of modern ecosystems, with or without antrhopic influence. Both aspects are interest of petroleum industry. Among other approaches, foraminífera are used as good indicators of the fluctuation of relative sea level. This study aimed to survey and taxonomic study of the community structure of foraminifera in surface samples of a core, 60 cm, collected in mangrove located in Itapanhaú river in Bertioga (SP).It also aims to contribute to the discussion about typical patterns of community structure of mangrove margins and provide elements for discussion on the relative sea level behavior in this area in almost modern times. It was been collected 6 samples along the core of 60 cm of length, each one 10 cm depth. They were made in laboratory and in each sample sought to find at least 100 foraminifera per ml. The species identification was made with reference specified material and collection available on IGCE-UNESPetro, Rio Claro. The community structure was studied in terms of richness, diversity and species composition and was made the results comparison from similar areas to interpret the depositional environment. Were found 21 species within them 13 calcareous and 8 binders, being the most abundant and frequent species Ammonia tepida, Ammonia parkinsoniana e Elphidium spp. Essentially there wasn’t change in the community structure within the period covered by the core which reflects an environment of outer margin of mangrove without noticeable change in relative sea level at the respective time of deposition of muddy sediments. The community structure here recognized its similar to estuarine environment well maintained which indicates a low human impact in the area over the time interval. The agreement of the results...

Avaliação do potencial genotóxico e mutagênico do efluente de uma refinaria de petróleo e dos rios sob sua influência, por meio de bioensaios com Oreochromis niloticus (Perciformes, Cichlidae)

The petrochemical industry represents a sector of intense activity, in constant expansion and great economic importance for Brazil. In order to be used in various human activities petroleum needs to suffer a refinement process that, besides requiring large amounts of water, produces large amounts of wastes, which are discharged in hydric resources. Petroleum is a complex mixture mainly comprised by hydrocarbons, many of them are recognized as toxic chemicals, which are able to induce a considerable environmental pollution. Since water is an important resource for the maintenance of ecosystems and is also the final receiver of effluent discharges of the petroleum industry, there is an imminent need to monitor, constantly, the hydric resources that are influenced by this industrial activity, so that it can be ensured the environmental health. This study aimed, mainly, to analyze the quality of water samples derived from refinement process performed of the largest petroleum refinery in Brazil (REPLAN), in distinct steps of the industry treatment, and waters of rivers associated to its activity. Micronuclei and Nuclear Abnormalities tests were performed in erythrocytes of the fish species Oreochromis niloticus exposed to water samples derived from refinery use and to rivers under the influence of their effluents, in order to evaluate its possible toxic, genotoxic and mutagenic effects. The results obtained show that the treatment carried out by the refinery, during the evaluated periods, was effective, since the substances present in the water samples did not induce significant genotoxic and/or mutagenic alterations in the genetic material of the test organisms. On the other hand, when the substances present in the refinery effluent mix with the ones derived from other industrial activities developed upstream of this industry, the resultant compound, in some periods, presented genotoxic potencial, characterized by a rise of erythrocytic...

Estudo do fenômeno de instabilidade de estruturas cilíndricas de paredes finas submetidas ao carregamento de pressão externa

Thin walled cylindrical shells are widely used in many areas of industry, including civil, mechanical, nuclear, marine, petroleum and aerospace engineering. The wide application of thin cylindrical shells and the importance of instability phenomenon are the motivation basis to this study, since these factors have a great importance in engineering projects. It is presented a detailed study about the instability of cylindrical shells based on theoretical calculation, which results are compared with finite elements method calculation. The loading and boundary conditions analyzed are based on the most common types verified in real engineering projects and refer respectively to lateral (external) pressure and cylinders with simply supported edges. The calculation based on the finite elements method was executed with ANSYS 13.0 software. The results obtained with this calculation are in good agreement with the analytical theory presented in the technical note NACA No 1341 (BATDORF, 1947) considering a wide range of applicability. On the other hand, the analytical method presented in the book Theory of Elastic Stability (TIMOSHENKO; GERE, 1936) has a very restrict applicability and has presented considerable deviations in a great sort of the analyzed cases

Aspectos petrográficos dos carbonatos da Formação Riachuelo - Albiano, bacia de Sergipe

The carbonatic rocks have great importance in petroleum geology, since most hydrocarbons reservoirs in the world are associated to this kind of rock. The new giant petroleum fields discovered in the Brazilian southeast Atlantic margin are directly connected to calcareous rocks, which are subjacent to the Aptian evaporite pack. This demand an increase in the number of geologists able to study such deposits. The Aptian carbonatic platform is completely exposed only in the Sergipe-Alagoas Basin. Therefore, it works as a natural laboratory to the study and understanding of this kind of rock. The Sergipe Basin is situated in the east Brazilian coast, and has its evolutional history is intimately related to the formation of the South Atlantic Ocean, through the break-up of the Gondwana supercontinent. The marine sequence of the Brazilian marginal basins is of Albian age and is marked by the development of carbonatic platforms. In doing so, this paper aims to analyze the Albian limestones from Riachuelo Formation of the Sergipe Basin. The project gave to the student the opportunity to increase his knowledge in carbonates, due to the laboratory and outdoor activities. The studied deposits, within a regional outline, were petrografically described, allowing interpretations about the evolution of the former South Atlantic Ocean. Ten points were visited where samples were collected for making of thin sheets. In this work several carbonatic facies were identified totaling 116 laminates described.

Fácies e associação de fácies da formação Pirambóia na região de Descalvado/SP

The Pirambóia Formation is a lithostratigraphic unit of the Paraná Basin, positioned between the Corumbataí (lower) and Botucatu (upper) Formations on the eastern edge of the basin. This unit is focused by many studies due to its great importance as an essential component in the Guarani Aquifer System (SAG) and the petroleum system “Irati-Pirambóia”, as excellent reservoirs. The Pirambóia Formation is historically the subject of several controversies on issues like age, contact relationships with the upper unit and depositional paleoenvironment. Despite these aspects, the Pirambóia Formation is commonly taken to be of Triassic age and is considered a product of wet aeolian systems, with plenty of wet interdunes and subordinate fluvial facies. In this work, by using techniques such as facies analysis, depositional architecture and facies association, facies of this unit were characterized and their depositional paleoenvironment was inferred particularly in Jundu Mining, region of Descalvado in northeastern São Paulo. Techniques such as grain size and petrographic analyses, aimed to characterize this unit as a potential reservoir rock. Five facies were described for the Pirambóia Formation in the studied region: St, Sh, Sm, Sr and Gt facies, generated by sedimentary processes of the bottom load type, mostly under low flow regime (with exception for the Sh facies, which is formed by upper flow regime processes). In addition to that, four facies associations were recognized from the architectural elements, primarily contained within the main channel: complex channel bars, composed by foreset macroforms (FM), sandy bedforms (SB) and gravel bars and bedforms (GB); flood deposits, constituted by laminated sand sheets (LS); deposits of hyperconcentrated flows and eolian deposits. It was interpreted that the Pirambóia Formation in Descalvado (SP) is the record of the sedimentation of braided rivers, with dunes and interdunes deposits...

Avaliação de fração volumétrica de austenita retida e martensita em aço trip 800 utilizando três métodos diferentes

In the second half of the last century the automobile industries suffered from the petroleum crisis caused mainly by the wars in the Middle East. These crises led the automakers rethink their vehicles. One of the most important events after that was the adoption of new steels by the industry. One example is the TRIP steels (Transformationinduced plasticity). It is known that the macroscopic behavior of a material is strongly dependent on its microstructure and therefore the quantitative metallography is important to understand and relate the material properties to its microstructure. In this work, different specimens of TRIP steels were etched using LePera reagent. The obtained images were analyzed using digital processing. Using the ImageJ software the methods threshold and watershed were studied as well as a comparison with the ASTM E562 standard. The methods were compared and finally the morphological characteristics and volumetric fraction of the retained austenite and martensite phases were analyzed. The results showed that the threshold led to a higher number of identified grains with lower mean area and total area fraction than the watershed method and ASTM standard

Determinação de metais em água produzida de petróleo

In order to enable the reuse of the large surplus volume of petroleum produced water for irrigation of crops inedible, the quality evaluation of this water is very important. This work aimed to evaluate the effectiveness of the diffusive gradient in thin films technique (DGT) for the determination of labile Cu (II), Mn (II) and Zn (II) in petroleum produced water destined to reuse in agriculture. Samples were collected at the exit of the wastewater treatment plant (WWTP) (after separation oil/water and flotation) of a Petrobrás onshore production region. Basically, the laboratory experiments with DGT devices involved the evaluation of the behavior of the main variables of the technique for determination of analytes in the samples (diffusion coefficients, immersion time, fractionation of organic and inorganic species, and performance of diffusion gels with different porosities, among others). Also, experiments were conducted based on the solid phase extraction (SPE) protocol with Chelex- 100 resin using previously established protocols to support the study. During the project the possibility of in situ immersions in water treatment plants was evaluated. The DGT technique presented satisfactory results for determination of Mn in produced water, and can be used for in situ determinations. However, the results obtained for Cu and Zn show the need of additional studies

Avaliação do efeito do tratamento com surfactante químico e Pseudomonas aeruginosa LBI na toxicidade de solo contaminado com óleo lubrificante usado

Petroleum and its subproducts are considered a treat for the environmental quality because of the many environmental accidents that may occur during exploitation, transport and storage. A common remediation technique used in the contaminated areas is based on the use of surfactants, mainly the chemical ones, because they have low production costs. In the other hand, some microorganisms have indicate capacities of producing surfactants that emulsify substances and as result, offer a bigger contact surface for the microbiota degradation. This biossurfactants stand out in comparison with the chemical surfactants because they present lower micelar concentration values, are more tolerant for temperature and pH variation, because they are biodegradable, have low toxicity, higher emulsification and hydrocarbon solubilization index. In this way, after the surfactant application, a toxicity evaluation have to be made to identify the treatment effects. In soil, the activity of some microbial enzymes can show the environmental behavior of the contaminant under different treatment conditions. Dehydrogenase is one example of those enzymes that can demonstrate indirectly the effect of the pollutant on the soil microorganisms. The aim of this paper was to evaluate the toxicity after the addition of a surfactant and/or Pseudomonas aeruginosa LBI in soil contaminated by a mineral automotive lubricant. The previous mentioned bacteria are a potential biossurfactant (rhamnolipid) producer. In order to evaluate the toxicity, the dehydrogenase test was run. In this test, trifeniltetrazolium compound (TTC) after utilized as an electron acceptor, turns into trifenil formazan (TPF), that can be indirectly quantified using the absorbance measured by the spectrophotometer UV-visible. In this way, it was possible to quantify the dehydrogenase activity from the contaminated soil samples... (Complete abstract click electronic access below)

Litofácies e relações estratigráficas da formação Aquidauana no nordeste da Bacia do Paraná - São Sebastião do Paraíso (MG)

The Aquidauana Formation is characterized by sandstones of variable granulation, mudstones and diamectites abundant in clay, typical colors like brick red (vermelho tijolo) of glacial, fluvial and lacustrine origin. It’s chronostratigraphic equivalent to the Itarará group from the Neo Carboniferous age, that under the exploratory view, such units represent important intervals in the basin, occurring together with them minerals as well as energy resources as petroleum, underground water and coal – what requires a great paleogeography and stratigraphy knowledge for its exploration. By gathering information from the columnar sections of the area, it was possible to characterize the sedimentary facies, the stacking pattern as well as the association. It was also made an attempt of stratigraphic correlation, which showed great difficulties since glacial environments present a great lateral discontinuity of the facies besides the complex relationship process of formation. As a result, it was obtained 8 sedimentary facies, the lateral and vertical relations and genesis process. It is proposed that the sedimentary environment in the study area is the fluvio glacial, characterized by alluvial systems formed by defrosted water which transport the sediments that are deposited in plains in front of the glacier (distal outwash). Petrographic thin section analysis showed that the transportation process was ineffective. The grains present punctual to lobular contacts, characterizing good porosity and permeability to the rock, varying these qualities according to more or less existence of matrix. The presence of Iron Oxide deposited between the recrystallization border and feldspathic mineral indicates that this rock has possibly presented a primary rubefaction, intensified by alkaline fluid percolation

Biodegradação da vinhaça resíduo da produção de etanol

The State of São Paulo is responsible for the largest sugar cane production in Brazil, as well as the largest production of ethanol made of this raw material – which is widely used as fuel for automobiles. This utilization began in the 1970’s, with the institution by the Brazilian government of the National Alcohol Program (PRO-ÁLCOOL), as a consequence of the petroleum crisis, rising again five years ago, with the development of flex fuel cars. The obtaining process of ethanol originates residues; amongst them, vinasse is the one that’s generated in the largest amount (an average of 10 to 13 litres/litre of ethanol produced). The disposal of this residue in waters was only forbidden in 1978, but before that, researchers had already been investigating its utilization as raw material. This paper had the objective of accompany the biodegradation of vinasse by evaluating the oxygen comsumption during it until the ultimate Biochemical Oxygen Demand (uBOD), performed in twenty days; another objective was to analyse the biomass production of Saccharomyces cerevisae in this residue. Physical and chemical analyses of the residue were also performed, as well as acute toxicity essays using Daphnia similis and Dugesia tigrina, before and after its biodegradation. The physical and chemical analyses pointed elevated acidness (pH = 3,98), conductivity (8,30 mS/cm) and COD (25.693,43 mg O2/L) and mean quantity of suspended solids (5.246 mg/L). The toxicity essays indicated absence of toxic potential in vinasse after biodegradation for both species. The uBOD degradated until 88,22% of the COD, demonstrating the possibility of biodegradation of most of the residue’s organic load in a relatively short period of time. S. cerevisae caused a 37,03% COD diminution in vinasse, diminished its conductivity and promoted a slight elevation of the pH; it obtained low biomass...(Complete abstract click electronic access below)

Interpretação tectono-estratigráfica do reservatório Quissamã (Eo-meso-albiano) nos campos de Pampo, Bicudo e Bonito, Bacia de Campos

Hydrocarbon accumulations occur in marine carbonate reservoirs of Quissamã Formation (early to midlle Albian), southwest Campos Basin. We investigated Pampo, Bicudo and Bonito fields, in order to understand the tectono-structural framework of oncolite/bioclast coarse-grained calcarenite reservoir and the calcilutite-marl-shale sealing interval (Late Albian to Turonian). The database of eleven wells from those fields allowed to elaborate structural sections correlating the Macaé Group – both Quissamã reservoir and Outeiro seal, the latter corresponding to the tectonic deepening phase of basin evolution. Based on density and electric logs, it was prepared structural sections of the carbonate reservoirs with consequent identification of porous zones and oil-water contacts. An extensive 3-D seismic database (~300 Km2) allowed to map three reflectors which represent the limiting units of Macaé Group