Desempenho estrutural de vigas em madeira laminada colada armada

The objective of the present work was to evaluate Pinus’ glued laminated timber (glulam) beams and steel reinforced glulam beams, using PU mono-component adhesive in lamination step and epoxy adhesive to bond steel bars. The mechanical performance was verified through bending test, and the adopted method based on homogenized section, to considerate the differences between wood and steel mechanical properties. The homogenization section method proved itself effective in obtaining the stiffness of the parts in MLCA. The stiffness of reinforced beams increased 91% in comparison with glulam beams, differing only 5.5 % from value of stiffness calculated

Proposta de conector para ensaios de ligações CDE submetidas à tração perpendicular as fibras em madeira de pinus

The growth of urban population associated with the shortage of supply of public infrastructure such as hospitals, kindergartens, schools, among others, has reinforced the need to develop alternative methods that simplify the construction processes and allows for a reduction in these costs works. The conventional processes have increasingly been shown ineffective to solve the problem of demand for different types of urban and rural buildings. Given this fact, industrial construction processes can gain space and have proven to be highly interesting to solve the above problems, in particular, considering the cost-effective and time. Therefore, this study aimed to determine the influence of moisture on the strength of metal plate connections connectors (printed plate with teeth). For the sizing of the links between structural lumber using metal connectors with teeth prints; controlled process variables (drying of the wood and the different moisture contents), and finally found results and compare them with different literatures order to obtain a qualitative efficiency of the process. Some specimens had very low expectations, can be explained by the presence of bone marrow, and pre-existing cracks. Thus, the results were discarded for further analysis and more accurate results

Projeto, desenvolvimento e construção de um redutor/multiplicador de velocidades de baixo custo

This paper aims to present the design, development and construction of a reducer / multiplier speeds low cost, sturdy and easy operation. The beginning of the project was given to research on issues related to mechanisms and machine elements, and these theories of fundamental importance in the development of items of equipment which, together with the aid of AutoCAD software, enabled the construction of it. Parallel to the sizing of equipment, were also investigated and taken into account the costs of materials used in the project. Made to mount the reducer / multiplier speeds it was at the evidence through experiments involving the use of torque wrench, tachometer and weights, getting proven applicability in situations that are small or medium loads required

Anatomia floral de espécies de Bulbophyllum sect. Micranthae (Orchidaceae, Asparagales)

Bulbophyllum, which comprises 1876 species, is considered the second largest genus of angiosperms, with a pantropical distribution. The morphological and anatomical floral studies in the genus are incipient, with data restricted to the gynostemium and lip of some species. Based on molecular data, six sections were recognized within Bulbophyllum at the Neotropics, amongst them Bulbophyllum sect. Micranthae, which comprises 12 species distributed in central South America. We aimed to study the floral anatomy of six species of Bulbophyllum sect. Micranthae, in order to determine useful characters to differentiate them and contribute to the anatomical characterization of the section as a whole. Floral anatomy was assessed through usual techniques of light microscopy. The data found here for B. adiamantinum, B. chloroglossum, B. epiphytum, B. mentosum, B. micranthum and B. rupicolum allowed to identificate the presence of glandular trichomes and the possible presence of a secretory region on the lip, which might produce substances used as a reward to pollinators. The most significant anatomical characters to the species characterization were the shape and ornamentation of the outer periclinal walls of the epidermal cells, as well as the number of vascular bundles in dorsal and lateral sepals and at the lip. The data also allowed the differentiation between B. epiphytum and B. rupicolum, species very similar in morphology and phylogenetically related. Besides that, the data also allowed the discussion regarding the maintenance of B. mentosum within the section: although its inclusion is supported by molecular studies, the anatomical data here presented shows greater differences compared to the other species, not supporting its maintenance in Bulbophyllum sect. Micranthae

Aspectos formais da trilha musical de Yasunori Mitsuda para o game Chrono Cross e sua interação com o enredo

This work has the aim of evince compositional tools used in the development of musical scores for role-playing videogames through the analysis of Yasunori Mitsuda’s music for Chrono Cross (1999). This research is divided in two main parts: the first traces a historic path of the RPG genre on videogame consoles, since its birth as a tabletop game in the decade of 1970 until its consolidation on 3D game machines released in the 1990’s. The focus of this historical study concentrates on the aesthetics of this kind of game and on the multiple relations it settles with sound throughout the years. The second part is an analytical work on an assortment of pieces by Mitsuda for the aforementioned game, bringing up the most interesting aspects of the connections established between these compositions and the whole game.

Negócio de artesão: empreendendo no artesanato pessoal

Negócio de Artesão: Empreendendo no Artesanato Pessoal is a blog about entrepreneurship for craftspeople. The present work comes to help in the formation of the artisan, bringing material for study on business, experts and organizations who understand the subject show up to talk about several topics in a simple, concise and relaxed way. Moreover, we also want to tell the story of people who already undertake projects, and supplement their income by selling products they make, humanizing the testimonies. The overall goal is to generate interest for the entrepreneurial activity in people who do handcrafts or who want to start doing it. Thus, people who once used to handcraft just as a hobby can now find a way to supplement their income. The specific goals are: to encourage people to think of a business of their own; stimulate the creative industries through the blog; contribute to the formalization of the artisan; stimulate the exchange of knowledge among artisans; to spread the work of artisans. The methodology used for this project was exploratory research, using bibliographical and desk research, in addition to interviewing and direct and indirect documentary techniques. The method used was the deductive approach, as the methods of procedure used were the historical and comparative ones. As a result, we have the blog named Negócio de Artesão, which can be used both to inform the reader about how he can conceive their enterprise and to be able to make money from their work

Estudo da influência da aplicação do fluido de corte no torneamento da liga de alumínio AA7075

One of the ways to minimize the effects of unproductive time caused by tool wear can be achieved by introducing an efficient system of lubrication and cooling in the process. However, in the last decade the research had the goal to restrict the maximum use of refrigerants and / or lubricants in metal-mechanical production. The important factors that justify this procedure include the operational costs of production, ecological issues, and the legal requirements of environmental conservation and preservation of human health. The purpose of the proposed work is the study of machining by turning with the focus on the influence caused by the application of cutting fluid in several ways of application (abundant and MQF) and also by comparing the results obtained by machining without the presence of fluid . For this purpose, the turning tests are conducted using an aluminum alloy (AA 7075). The response variables to be analyzed were obtained from the roughness (Ra and Ry), the stresses presented (VB) and their progression in relation to the cutting length achieved, the type of chip formed, in addition to changes in the degree of finish (roughness) presented by the turned parts. The results of this study should provide more detailed information about the actual influence of cutting fluids in turning this alloy, which are characterized by high rates of deformation when the formation of damaging your chip machining and also the quality of surface generated. Therefore, it is expected to provide subsidies to promote the optimization of machining this alloy making the most of the role of cutting fluid

Prospecção de novos negócios numa indústria de autopeças: diagnóstico de falhas e sugestões de ferramentas para melhoria

The growth and expansion in auto parts market are directly related to the ability of a company to innovate and gain new customers, increasing its portfolio of customers and products. For this purpose the process of prospecting for new business has become a key process in companies seeking this goal, which requires teams and structures dedicated to it. Besides counting on available resources to carry out prospecting, it is necessary to properly manage the process as a whole, whose main result is a business proposal, which may lead to closer relations with the potential client and the activation of a new business. Process failures and difficulties to formulate a commercial proposal lead to documents produced without the quality needed that makes it harder to obtain new business. The objective of this study is to evaluate the process of new businesses quotation in the auto parts industry and indicate opportunities for improving this process. This goal is achieved by mapping the current process, from the diagnosis of problems and the indication of tools that can prevent or minimize the problems diagnosed. The information supporting this study were obtained by the bibliographical research, participant observation of the process, unstructured interviews with some of the involved people in the process and prospecting tools that can improve it. It results the mapping of new business quotation process, the points indicated as failures and difficulties in the process and the appointment of project management tools that can bring improvements to the new business proposals and pointing the moment for your application in the process

Aspectos da biologia e fisiologia da alimentação do cupim neotropical Cornitermes cumulans (Isoptera, Termitidae)

Os Isoptera são insetos sociais cujas colônias apresentam diversas castas, as quais têm um rígido sistema de divisão de trabalho que visa otimizar a eficiência da colônia. Estas castas apresentam morfologia específica, que capacita estes indivíduos a desenvolverem determinadas tarefas com eficiência. Os cupins apresentam aparelho bucal mastigador, constituído pelas seguintes peças bucais: labro, mandíbulas, maxilas, lábio, epifaringe e hipofaringe. Sua dieta alimentar é celulósica e bastante variada, sendo que estes insetos podem se alimentar de madeira (em vários estágios de decomposição), gramíneas, plantas herbáceas, serapilheira, fungos, líquens, partes de artrópodes e húmus. O estudo desse tipo de dieta é muito difícil, uma vez que o material já se encontra bastante decomposto antes de ser ingerido pelo animal. Cornitermes cumulans é uma espécie de cupim nativa do Cerrado brasileiro, pertencente à família Termitidae, subfamília Syntermitinae, que constrói ninhos em montículos, ricos em argila, que podem atingir até 4 metros de altura. Na parte interna dos ninhos, pode-se observar galerias grandes e de aspecto arredondado e um centro celulósico de coloração escura, de textura lisa e pouco resistente, onde os cupins armazenam um alimento, que parece ser previamente mastigado e depois regurgitado. Mesmo com a grande ocorrência desta espécie de cupim nas áreas de pastagens, seus verdadeiros hábitos alimentares são ainda pouco conhecidos. As informações disponíveis são contraditórias, uma vez que não está esclarecido a qual grupo funcional C. cumulans pertence e se existe realmente uma alimentação “in situ” desta espécie no campo. Em vista do exposto, este estudo teve como objetivo geral esclarecer o hábito alimentar de C. cumulans e a natureza química do alimento armazenado no ninho para compará-lo com o alimento coletado pelos... (resumo completo, clicar acesso eletrônico abaixo)

Procedimentos para análise de lucratividade de produtos no setor de autopeças metálicas

In a globalized world, organizations face an increasingly dynamic, innovative and competitive environment, so that this condition requires continuous adaptation to market developments. Intense competition requires organizations to further improve their performance, making productive efficiency a key factor for survival. A methodology that has added value to the product through a reconfiguration of the production method is the implementation of a management philosophy called Lean Six Sigma. The main objective of this work is, in the light of the Lean Six Sigma philosophy, intervene in a critical-collaborative way to develop procedures for analyzing the profitability of products in a company specializing in steel processing. To achieve this goal, were applied the method of action-research to intervene in a group of professionals for the study of the profitability of products in a auto parts industry. The interaction of practical and theoretical knowledge provided by the action-research allowed the business program was enhanced. The procedures proposed in this study were able to identify the current profitability of the product, the main causes of inefficiency and productive for solutions to reduce production inefficiencies, when the productive systems planned and actual production system were compared. The results indicate that current profitability of -3%, while the parameter provided during budget was 10%. Thus, it is concluded that the low profitability of the products may compromise the company's financial results and affect their competitiveness in the market. To address this problem, the Lean Six Sigma presents itself as a versatile and high applicability philosophy, providing relevant results for characterization and troubleshooting. It was also observed that the evidence presented in this paper can be adapted to other companies in the metal auto parts segment to identify and recover the profitability of products

Modelagem e simulação do mecanismo biela manivela e análise estrutural de biela automotiva

Nowadays, the automotive industry is working to optimize the design of engines, in order to reduce the fuel consumption with acceptable efficiency ratio. This undergraduate thesis is aimed at perform a kinematic/dynamic analysis of a slider-crank mechanism that is part of a four stroke internal combustion engine, the same engine that was used in the analysis described by Montazersadhd and Fatemi (2007). Two algorithms were developed based on Kane’s method to calculate velocities and accelerations of the mechanism bodies, and provide the acting forces at connecting rod joints. A SimMechanics model was developed to simulate the engine, and monitoring the same parameters that were calculated with the algorithms. The results obtained with both approaches were satisfactory and showed good agreement with the values provided by Montazersadhd and Fatemi (2007). The obtained results showed that the axial component of the rod joint efforts was caused by the pressure exerted on the piston head,whereas the radial component was related with the action of inertia loads. Besides, this thesis presents a connecting rod assembly mesh that is going to be used for static and fatigue finite element analysis in the future

Usinagem da liga de níquel inconel 718 com pastilhas de cerâmica

The machining of super alloys resistant to high temperatures such as nickel alloys, inconel 718 specifically, is a very difficult job to obtain improvements in the process, due to the difficulty of machining at high cutting speeds, the use of these alloys in industries showed great developments in recent years, its application in aeronautical industry spread being used in vane turbo, compressor parts, props and set elements. The automotive, chemical, medical and others also took advantage of the great features of inconel 718 and has used the material. The high temperature resistant alloys have high machining difficulty, a fact that is associated with high cutting forces generated during machining which result in high temperatures. High levels of temperatures can cause deterioration of the cutting edge, with subsequent deformation or breakage, wear most common obtained in machining such materials are flank wear the formation of built-up edge for cutting and notch wear. The experimental part of the work consists in machining of nickel-based alloy Inconel 718 heat treated for hardness, using a tool based ceramic silicon nitride Sandvik (Si3N4) in order to compare the best results obtained in the master's thesis of SANTOS (2010) who used a tool ceramics also the basis of silicon nitride which was developed in the doctoral thesis of SOUZA (2005). Assays were performed on a CNC lathe and was noted for each cutting edge results obtained. Tests were made starting from an initial condition of the tool with cutting speed of 200 m/min, feed 0.5 mm and 0.5 mm depth of cut was reduced cutting speed for the subsequent tests with the same conditions of feed and depth of cut. The tool presented wear instant under two 200 m/min and 100 m/min, premature rupture of 50 m/min and finally cut provided with difficulty... (Complete abstract click electronic access below)

Auxílio na tomada de decisão na compra de uma máquina de usinagem a laser

Decision making is one of the most important factors for growth and future, both from a business, as in people's life and attitudes in the simplest of everyday day. This work aims to assist decision making in buying a laser cut machine, a manufacturer of auto parts and wheels, and later this technique can be considered to acquisition of other equipment. In this case was used the AHP to aid the decision by multiple criteria. First we analyzed the most important criteria of the current machine for the application of the method and were later made the application and sensitivity analysis

Manual de procedimentos técnicos para manutenção preventiva em empilhadeiras na área de prestação de serviços

The service area is in full development in the world, and it is proven the benefits of outsourcing services to large companies, which deliver services and manufacturing experts can focus only on production of their products. In the case of cargo handling is no different, many factories hire specialized companies to reduce fixed costs and factory overhead. And with the intense competition in the market, service providers are increasingly seeking to reduce costs in order to offer services at competitive prices. So if we see a growing need to train its employees to perform services faster and with better quality. In this work, will be a handbook of technical procedures for preventive maintenance, as well as a catalog of parts required to perform the same for Toyota 8 Series forklifts. Will be developed also tools to control and carry out the preventive maintenance of these trucks, such as Check-list and a manual of tools needed for each procedure. The results show that service quality has improved considerably and the cost of wrong parts decreases more than 15%

Estudo de compósitos de madeira com reforço em bambu para utilização em mobiliário

Bamboo has been studied because of its peculiar mechanical properties and numerous possibilities of use, besides being a fast-growing grass and short cutting cycle. This study aimed to analyze the mechanical characteristics of wood-bamboo composite material, where the samples were developed from the combination of layers of bamboo as a structural reinforcement in solid pieces of pine and EGP panel parts. The species of wood used was Pinus taeda, and the bamboo species Guadua angustifolia and Dendrocalamus giganteus. All work was conducted at the Universidade Estadual Paulista - UNESP in the laboratory of Physical and Mechanical Properties of Wood. Tests including the density and tension parallel to grain of the bamboo species used and the static bending of composites in order to use this in the furniture industry. For the tests have been used as a basis the requirements of the normative document NBR 7190/97. The values obtained in the tests showed a significant increase in strength and stiffness compared to unreinforced parts, where there was an increase in MOE and MOR in static bending in all specimens used in evidence. The results showed the possibility of reducing sections in furniture components and the possibility of improving the mechanical properties of parts with defects found in wood of Pinus Itapeva region of São Paulo