Feasibility study of partial recrystallisation in multi-pass hot deformation process and application to calculation of mean flow stress

A feasibility study for handling the partial recrystallisation in multi-pass hot deformation where the heterogeneity of microstructure of deformed austenite is inherently accompanied is presented. The proposed model is based on modification of the conventional model in which the microstructure of deformed austenite at each pass is simply taken as being homogeneous during the multi-pass deformation. The usefulness of the modified model has been demonstrated by applying it to a four-pass oval–round (or round–oval) rod rolling sequence. The recrystallised fraction, austenite grain size (AGS) and mean flow stress at each pass computed from the modified model has been compared with those from the conventional model. The result showed that the recrystallisation behaviour and evolution of AGS at a given pass were dependent on the modelling method of the partial recrystallisation in the multi-pass rolling for the case studied. As the rolling speed increased, the difference between the mean flow stresses calculated by the conventional model and the proposed model was gradually larger in accordance with the contribution of partial recrystallisation.

Two stage partial classification for inconsistent and imbalanced classes

When deriving classification rules for a non-symmetric database with a binary target class, it is common practice to generate rules for the majority class, then any object which is not covered by a rule of suitable accuracy is by default given the minority class prediction. However, in the case where misclassification costs for the minority class significantly outweigh those of the majority class, this may mean that there are still costly incorrect predictions. We examine the capability of an evolutionary algorithm to detect these potentially costly misclassifications.

Synthesis of ZnO nanowires using ball-milling and annealing method

Nanowires represent a new class of ZnO morphologies with many exiting new properties and applications. The research in the synthesis and characterization of ZnO nanowires has received enormous attention in recent years. However, most synthesis methods using vapor deposition process can only produce small amount of sample, mass production has not been achieved yet. Large-quantity production of ZnO nanowires needs to be realized for large-scale property and application studies. One of the promising approaches to the large scale synthesis is a ball-milling and annealing method. This paper first introduces several common synthesis methods of ZnO nanowires and then summarizes the one dimensional nanomaterials produced by the ball milling and annealing method. Finally, some preliminary results of ZnO nanowire synthesis are presented.

Carbon nanotubes formed in graphite after mechanical grinding and thermal annealing

Multi-walled carbon nanotubes with cylindrical and bamboo-type structures are produced in a graphite sample after mechanical milling at ambient temperature and subsequent thermal annealing up to 1400 °C. The ball milling produces a precursor structure and the thermal annealing activates the nanotube growth. Different nanotubular structures indicate different formation mechanisms: multi-wall cylindrical carbon nanotubes are probably formed upon micropores and the bamboo tubes are produced because of the metal catalysts. A two-dimensional growth governed by surface diffusion is believed to be one important factor for the nanotube growth. A potential industrial production method is demonstrated with advantages of large production quantity and low cost.

Purification of boron nitride nanotubes

A purification process was developed for the first time for boron nitride (BN) nanotubes. BN nanotubes, prepared using a ball milling and annealing method, contain a high yield of nanotubes and a small amount of BN and metal catalyst particles. The metal particles can be dissolved in an HCl solution. Fine BN nanoparticles and thin layers were first converted to water soluble B₂O₃ via a partial oxidation treatment at 800 °C. The oxide particles and layers can then be dissolved in hot water. Thermogravimetric analysis has been used to determine an adequate oxidation temperature at which fine BN particles were oxidized.

Conical boron nitride nanorods synthesized via the ball-milling and annealing method

A boron nitride (BN) nanostructure, conical BN nanorod, has been synthesized in a large quantity on Si substrates for the first time via the ball-milling and annealing method. Nitridation of milled boron carbide (B₄C) powders was performed in nitrogen gas at 1300°C on the surface of the substrates to form the BN nanorods. The highly crystallized nanorods consist of conical BN basal layers stacked along the nanorod axis. Ball milling of the B₄C powders can significantly enhance the nitridation of the powders and thus facilitate the formation of nanorods during the annealing process.

Efficient production of ZnO nanowires by a ball milling and annealing method

ZnO powder was mechanically milled in a ball mill. This procedure was found to greatly increase its evaporation ability. The anomalous evaporation behaviour was caused by the disordered structure of the milled material and was not related to the increase in its surface area after milling. ZnO nanowires were synthesized by evaporation of this milled precursor. Nanowires with smooth and rough surfaces were present in the sample; the latter morphology was dominant. A green emission band centred at 510 nm was dominant in the cathodoluminescence spectrum of the nanowires.

One-dimensional nanomaterials synthesized using high-energy ball milling and annealing process

One-dimensional (1D) nanomaterials including nanotubes, nanowires and nanorods have many new properties, functionalities and a large range of promising applications. A major challenge for these future industrial applications is the large-quantity production. We report that the ball milling and annealing process has the potential to achieve the mass production. Several examples including C, BN nanotubes and SiC, Zn nanowires are presented to demonstrate such capability. In addition, both size and structure of 1D nanomaterials can be controlled by varying processing conditions. New growth mechanisms involved in the process have been investigated and the high-energy ball milling has an important role in the formation of these 1D nanomaterials.

Socially optimal criminal court waiting times : a partial investigation

Criminal courts provide a forum for conducting prosecutions with a guilty plea or a trial. Since queues are used as the basis for rationing scarce court facilities delays are inevitable, however courts are invariably criticised as being inefficient as a consequence. This focus on court delay defined as the time elapsing between the listing of the case in the court list and its final disposition is misleading. Rather, attention should be drawn to the considerably longer period between the initiation of proceedings and the conclusion of the case. In the case of defendants not granted bail, this pre-trial delay confers both costs and benefits on society and this observation can be used to ascertain socially optimal pre-trial waits.

Partial purification and characterization of limonoate dehydrogenase from Rhodococcus fascians for the degradation of limonin

An extracellular limonoate dehydrogenase was purified 10-fold from a cell-free extract of Rhodococcus fascians by ammonium sulfate precipitation, dialysis, and ultrafiltration. This purified dehydrogenase catalyzed the
conversion of limonoate to 17-dehydrolimonoate. The enzyme showed optimum activity at pH 8.0 and 40oC, with K_m value of 0.9 µM, and requires Zn ions and sulfhydryl groups for catalytic action. The enzyme activity was inhibited by Hg²⁺ and NaN₃ ions. The degradation of limonin (66%) in Kinnow mandarin juice was successfully demonstrated with partially
purified limonoate dehydrogenase. With scale-up preparation of limonoate dehydrogenase, a successful debittering operation of fruit juices appears feasible.

Partial purification and characterization of exoinulinase from kluyveromyces marxianus YS-1 for preparation of high-fructose syrup

An extracellular exoinulinase( ^{2, 1}- ß- D fructan fructanohydrolase, EC 3.2.1.7), which catalyzes the hydrolysis of inulin into fructose and glucose, was purified 23.5-fold by ethanol precipitation, followed by Sephadex G-100 gel permeation from a cell-free extract of Kluyveromyces marxianus YS-1. The partially purified enzyme exhibited considerable activity between pH 5 to 6, with an optimum pH of 5.5, while it remained stable(100%) for 3 h at the optimum temperature of 50º c. Mn²⁺ and Ca²⁺ produced a 2A-fold and 1.2-fold enhancement in enzyme activity, whereas Hg²⁺ and Ag²⁺  completely inhibited the inulinase. A preparation of the partially purified enzyme effectively hydrolyzed inulin, sucrose, and raffinose, yet no activity was found with starch, lactose, and maltose. The enzyme preparation was then successfully used to hydrolyze pure inulin and raw inulin from Asparagus racemosus for the preparation of a high-fructose syrup. In a batch system, the exoinulinase hydrolyzed 84.8% of the pure inulin and 86.7% of the raw Asparagus racemosus inulin, where fructose represented 43.6mg/ml and 41.3mg/ml, respectively.

Should partial least squares be used for analysing psychological constructs?

This paper critically examines an analytical tool - partial least squares regression, or P LS - that is increasingly being used in the academic business literature to validate measures of psychological constructs, and to test hypotheses based on these. The paper provides a contextual and historical review of the resurgence of P LS, and explores several of the claims made by its developers and supporters when it was first promoted in the 1980s, and, more recently, when it reappeared in the information systems literature. Many claims appear plausible but rest on non-mainstream uses of terms and concepts taken from the psychometric field. The paper also canvasses why P LS is a poor analytical tool for research that involves psychological constructs.

Lie symmetries of partial differential equations using symbolic computing

This study presents a theoretical basis for and outlines the method of finding the Lie point symmetries of systems of partial differential equations. It seeks to determine which of five computer algebra packages is best at finding these symmetries. The chosen packages are LIEPDE and DIMSYM for REDUCE, LIE and BIGLIE for MUMATH, DESOLV for MAPLE, and MATHLIE for MATHEMATICA. This work concludes that while all of the computer packages are useful, DESOLV appears to be the most successful system at determining the complete set of Lie symmetries. Also, the study describes REDUCEVAR, a new package for MAPLE, that reduces the number of independent variables in systems of partial differential equations, using particular Lie point symmetries. It outlines the results of some testing carried out on this package. It concludes that REDUCEVAR is a very useful tool in performing the reduction of independent variables according to Lie's theory and is highly accurate in identifying cases where the symmetries are not suitable for finding S/G equations.

Control over the hydrophobic behavior of polystyrene surface by annealing temperature based on capillary template wetting method

The wetting behavior of water droplets was studied on tunable nanostructured polystyrene (PS) surfaces fabricated by temperature-induced capillary template wetting. The surface morphology of PS varied with the annealing temperature. Contact angle (CA) measurements showed that the wettability of polystyrene surfaces could be tuned from hydrophobic (CA = 104°) to superhydrophobic (CA = 161°) by rendering different morphologies, which could be explained by two distinct wetting modes, i.e., the Wenzel and Cassie–Baxter wetting state. Meanwhile, the critical annealing temperature inducing wetting transition between the Wenzel state and Cassie–Baxter state was obtained. This approach could be easily extended to produce superhydrophobic surfaces on other thermoplastic polymers.