Optimizing of intelligence level in welding

The productivity, quality and cost efficiency of welding work are critical for metal industry today. Welding processes must get more effective and this can be done by mechanization and automation. Those systems are always expensive and they have to pay the investment back. In this case it is really important to optimize the needed intelligence and this way needed automation level, so that a company will get the best profit. This intelligence and automation level was earlier classified in several different ways which are not useful for optimizing the process of automation or mechanization of welding. In this study the intelligence of a welding system is defined in a new way to enable the welding system to produce a weld good enough. In this study a new way is developed to classify and select the internal intelligence level of a welding system needed to produce the weld efficiently. This classification contains the possible need of human work and its effect to the weld and its quality but does not exclude any different welding processes or methods. In this study a totally new way is developed to calculate the best optimization for the needed intelligence level in welding. The target of this optimization is the best possible productivity and quality and still an economically optimized solution for several different cases. This new optimizing method is based on grounds of product type, economical productivity, the batch size of products, quality and criteria of usage. Intelligence classification and optimization were never earlier made by grounds of a made product. Now it is possible to find the best type of welding system needed to welddifferent types of products. This calculation process is a universal way for optimizing needed automation or mechanization level when improving productivity of welding. This study helps the industry to improve productivity, quality and cost efficiency of welding workshops.

Recovery of organic acids with liquid-liquid extraction contactors

Liquid-liquid extraction is a mass transfer process for recovering the desired components from the liquid streams by contacting it to non-soluble liquid solvent. Literature part of this thesis deals with theory of the liquid-liquid extraction and the main steps of the extraction process design. The experimental part of this thesis investigates the extraction of organic acids from aqueous solution. The aim was to find the optimal solvent for recovering the organic acids from aqueous solutions. The other objective was to test the selected solvent in pilot scale with packed column and compare the effectiveness of the structured and the random packing, the effect of dispersed phase selection and the effect of packing material wettability properties. Experiments showed that selected solvent works well with dilute organic acid solutions. The random packing proved to be more efficient than the structured packing due to higher hold-up of the dispersed phase. Dispersing the phase that is present in larger volume proved to more efficient. With the random packing the material that was wetted by the dispersed phase was more efficient due to higher hold-up of the dispersed phase. According the literature, the behavior is usually opposite.

Strategic Development of Electricity Distribution Networks – Concept and Methods

Strategic development of distribution networks plays a key role in the asset management in electricity distribution companies. Owing to the capital-intensive nature of the field and longspan operations of companies, the significance of a strategy is emphasised. A well-devised strategy combines awareness of challenges posed by the operating environment and the future targets of the distribution company. Economic regulation, ageing infrastructure, scarcity of resources and tightening supply requirements with challenges created by the climate change put a pressure on the strategy work. On the other hand, technology development related to network automation and underground cabling assists in answering these challenges. This dissertation aims at developing process knowledge and establishing a methodological framework by which key issues related to network development can be addressed. Moreover, the work develops tools by which the effects of changes in the operating environment on the distribution business can be analysed in the strategy work. To this end, the work discusses certain characteristics of the distribution business and describes the strategy process at a principle level. Further, the work defines the subtasks in the strategy process and presents the key elements in the strategy work and long-term network planning. The work delineates the factors having either a direct or indirect effect on strategic planning and development needs in the networks; in particular, outage costs constitute an important part of the economic regulation of the distribution business, reliability being thus a key driver in network planning. The dissertation describes the methodology and tools applied to cost and reliability analyses in the strategy work. The work focuses on determination of the techno-economic feasibility of different network development technologies; these feasibility surveys are linked to the economic regulation model of the distribution business, in particular from the viewpoint of reliability of electricity supply and allowed return. The work introduces the asset management system developed for research purposes and to support the strategy work, the calculation elements of the system and initial data used in the network analysis. The key elements of this asset management system are utilised in the dissertation. Finally, the study addresses the stages of strategic decision-making and compilation of investment strategies. Further, the work illustrates implementation of strategic planning in an actual distribution company environment.

Obtenção de filmes finos de TiO2 nanoestruturado pelo método dos precursores poliméricos

This work focuses in optimizing setup for obtaining TiO2 thin films by polymeric precursor route due to its advantages on stoichiometric and morphological control. Precursor stoichiometry, synthesis pH, solids concentration and rotation speed at deposition were optimized evaluating thin films morphology and thickness. Thermogravimetry and RMN were applied for precursor's characterization and AFM, XRD and ellipsometry for thin films evaluation. Results showed successful attainment of homogeneous nanocrystalline anatase TiO2 thin films with outstanding control over morphological characteristics, mean grain size of 17 nm, packing densities between 57 and 75%, estimated surface areas of 90 m²/g and monolayers thickness within 20 and 128 nm.

A análise por injeção sequencial (SIA): vinte anos em uma perspectiva brasileira

The year of 2010 marks the 20th anniversary of the development of Sequential Injection Analysis (SIA) by Ruzicka and Marshall. Considered the second generation of the flow injection methods, this article briefly describes the history, the basic principles of the technique and reviews all papers developed by Brazilian scientists aiming the divulgation of this automation technique in Analytical Chemistry.

Keskijänniteverkon käyttövarmuuden parantaminen verkostoautomaatiolla

Tässä työssä tutkitaan maastokatkaisijoiden ja kauko-ohjattavien erottimien kannattavia sijoituskohteita keskijänniteverkkoon. Kannattavuutta lasketaan kannattavuuslaskennalla, jonka lopputuloksena saadaan automaatiolaitteiden aiheuttama keskeytyskustannussäästö. Saaduille keskeytyskustannussäästöille lasketaan investoinnin takaisinmaksuaika, joka määrää kohteiden tärkeysjärjestyksen. Lisäksi tarkastellaan verkostomuutosten vaikutusta automaatiolaitteiden kannattavuuteen. Kannattavuuslaskentaa varten keskijänniteverkko jaetaan vyöhykkeisiin. Vyöhykkeiden avulla huomioidaan olemassa olevien kauko-ohjattavien erottimien ja varasyöttöjen vaikutukset. Laskentaparametrit määritetään yhtiön tilastoista. Tutkimuksessa on esitetty automaatiolaitteiden kannattavuuslaskentaa esimerkkikohteiden avulla, jotka on valittu keskijänniteverkon rakenteen perusteella. Maastokatkaisijoille ja kauko-ohjattaville erottimille löytyi paljon kannattavia sijoituskohteita. Maastokatkaisijalle havaittu lisäominaisuus parantaa sen kannattavuutta entisestään. Automaatiolaitteiden aiheuttamat keskeytyskustannussäästöt riippuvat siirrettävästä tehosta, vikataajuuksista ja keskeytyskustannusten arvoista, joiden vaikutusta on kuvattu herkkyystarkasteluilla.

Caracterização físico-química de filmes comestíveis de amido adicionado de acerola (Malphigia emarginata D.C.)

Edibles films are an alternative to synthetic materials used for packing food products. Barbados cherry is rich in vitamin C and carotenoids. The aim of this study was to characterize and develop films by casting from cassava starch, lyophilized Barbados cherry pulp and glycerol. The films were characterized with respect to thickness, water vapor permeability (WVP), water solubility, vitamin C, carotene and mechanical properties. The interaction of pulp and glycerol reduced film thickness. An increase in pulp concentration up to 60% increased WVP but beyond this concentration reduced both WVP and solubility leading to an increased level of vitamin C and β carotene in the films.

Uso da RMN como um sensor online em processos industriais

Nuclear magnetic resonance (NMR) is one of the most versatile analytical techniques for chemical, biochemical and medical applications. Despite this great success, NMR is seldom used as a tool in industrial applications. The first application of NMR in flowing samples was published in 1951. However, only in the last ten years Flow NMR has gained momentum and new and potential applications have been proposed. In this review we present the historical evolution of flow or online NMR spectroscopy and imaging, and current developments for use in the automation of industrial processes.

LOW COST ANALYZER FOR THE DETERMINATION OF PHOSPHORUS BASED ON OPEN-SOURCE HARDWARE AND PULSED FLOWS

The need for automated analyzers for industrial and environmental samples has triggered the research for new and cost-effective strategies of automation and control of analytical systems. The widespread availability of open-source hardware together with novel analytical methods based on pulsed flows have opened the possibility of implementing standalone automated analytical systems at low cost. Among the areas that can benefit from this approach are the analysis of industrial products and effluents and environmental analysis. In this work, a multi-pumping flow system is proposed for the determination of phosphorus in effluents and polluted water samples. The system employs photometric detection based on the formation of molybdovanadophosphoric acid, and the fluidic circuit is built using three solenoid micropumps. The detection is implemented with a low cost LED-photodiode photometric detection system and the whole system is controlled by an open-source Arduino Uno microcontroller board. The optimization of the timing to ensure the color development and the pumping cycle is discussed for the proposed implementation. Experimental results to evaluate the system behavior are presented verifying a linear relationship between the relative absorbance and the phosphorus concentrations for levels as high as 50 mg L-1.

Lasikuituputkien kelauslinjan automatisointi

Lasikuituputkien kelaamiseen tarkoitettu automaatio voidaan toteuttaa suorakulmaisen kolmion trigonometrian perusteella. Kelaaminen tapahtuu pyörittämällä muottia ja liikuttamalla samalla muottia sivuttain. Näin tehdessä saadaan kelattavat lasikuitulangat leviämään koko muotin leveydelle. Jos langat halutaan saada kelattua tiiviisti toistensa viereen, on muotin liikuttava tietty matka yhtä muotin pyörähdystä kohden. Matkaa kutsutaan nousuksi. Nousu riippuu lankojen muodostaman kimpun leveydestä, kelauskulmasta ja muotin säteestä. Kelauskulmalla voidaan vaikuttaa kelattavan tuotteen aksiaaliseen ja pitkittäiseen lujuuteen. Kelauskoneen automaatiojärjestelmä koostuu sähkökäytöistä, ohjaavasta yksiköstä, valvomosta ja erilaisista antureista. Eri osat yhdistetään toisiinsa väylätekniikalla. Sähkökäytöt ovat yleensä servokäyttöjä, koska niiltä vaaditaan tarkkuutta ja nopeutta. Ohjaavana yksikkönä toimii yleensä teollisuus logiikka. Anturointia tarvitaan esimerkiksi hartsin lämpötilan säätöön ja lankojen ratakireyden säätöön. Anturoinnilla ja säädöillä pyritään parantamaan kelattavan tuotteen laatua. Koneen ohjelmallinen toteutus vaatii kelauskoneen mekaniikan ja kelausprosessin ymmärtämistä. Lisäksi on huomioitava koneen käyttäjät ja heidän turvallisuus.

Perheyrityksen strategiamalli muuttuvassa toimintaympäristössä

Tutkimuksen tavoitteena on tutkia teollisuudelle aineita maahantuovan perheyrityksen toimintaympäristössä tapahtuvaa muutosta. Tutkimuksessa lähestytään yrityksen muuttuvaa toimintaympäristöä strategian näkökulmasta ja otetaan huomioon muuttuvana seikkana lainsäädäntö eli REACH -kemikaaliasetus. Tutkimuksen tutkimusongelmaa käsitellään konstruktiivisen tutkimuksen tapaan. Tutkimuksen aineisto on kerätty kvalitatiivisen tutkimuksen tapaan keräämällä tutkimustietoa valmiista aineistosta kuten arkistoista, dokumenteista ja kirjallisuudesta. Tutkimukseen on myös käytetty havaintoja, haastatteluja ja arkikokemuksia tutkimuksen kohteesta. Tutkimuksen viitekehyksessä käytiin läpi strategian teoriaa ulkoisesta toimintaympäristöstä yrityksen sisäiseen toimintaympäristöön. Yritykselle laadittiin strategiakeskeinen malli ottaen huomioon uuden lain tuomat vaikutukset yrityksen sisäiseen ja ulkoiseen toimintaympäristöön. Lakimuutoksen vaikutuspintoja löytyi kaksi: yrityksen toimialan toimintaympäristö ja sisäinen toimintaympäristö. Toimialan toimintaympäristössä eriteltiin lakimuutoksen rajapinnat viiden kilpailuvoiman avulla. Tulokseksi saatiin, että REACH vaikuttaa vahvasti läpi koko toimitusketjun. Vaikutustavat ovat korvaavat tuotteet, ostajien vaikutusvalta ja toimittajien vaikutusvalta. Lisäksi yhtenä vaikuttajana voidaan pitää uusia tulijoita sekä kilpailua nykyisten yritysten kanssa. Yrityksen sisäisestä toimintaympäristöstä löydettiin arvoketjun avulla lisää vaikutuskohtia. Ne olivat raaka-aineiden hankinnat, dokumentointi, näytteiden lähetys, varastointi ja varastokirjanpito. Lisäksi huomioitiin tukitoiminnoista lakiasiat ja henkilöstön koulutus.

A Survey and Classification of Software Testing Tools

Software testing is one of the essential parts in software engineering process. The objective of the study was to describe software testing tools and the corresponding use. The thesis contains examples of software testing tools usage. The study was conducted as a literature study, with focus on current software testing practices and quality assurance standards. In the paper a tool classifier was employed, and testing tools presented in study were classified according to it. We found that it is difficult to distinguish current available tools by certain testing activities as many of them contain functionality that exceeds scopes of a single testing type.

Usability Centered Implementation of a Web Based Value Added Module

Customer specific functionalities are a challenging part of procurement and invoice automation environments. In Basware Enterprise Purchase to Payment product family the customer specific reports are supported only in a basic level without any seamless interface between all EPP products. Also other customer specific functionalities are not supported as there is no customizable interface between the applications and only the most common features are implemented to the products themselves. In this thesis foundations are created for a new web based value added module where it is possible to create seamless customer specific functionalities throughout the whole EPP product family. The work is implemented in a Proof of Concept type of piloting. The system is created in user centered way where the users are able to explain their requests and determine their needs. The result is an excellent foundation for a module that can be developed further.

Fraktioinnin tehostaminen lajittelussa

Painelajittimet ovat yleisimpiä hiokkeen lajitteluun käytettyjä lajittimia. Painelajittimien suorituskyky on parantunut viimeisten vuosikymmenien aikana niin paljon, että pyörrepuhdistuksesta on pääosin voitu luopua osana hiokkeen lajittelua. Painelajittimen erinomaisuus perustuu siihen, että sillä voidaan erottaa massasta hyvinkin erilaisia epäpuhtauksia. Nykyään vallitsevia painelajittelun trendejä ovat sakeuden nosto, energiankulutuksen vähentäminen sekä eri fraktioiden erottumisen tehostuminen. Kaikilla pyritään vähentämään vedenkäyttöä ja parantamaan massan ominaisuuksia jatkoprosesseja silmälläpitäen. Tässä työssä tarkasteltiin painelajittimen roottorin kierrosnopeuden vaikutusta akseptimassan laatuun. Luodaan malli freeness-pudotukselle lajittimen yli. Sekä tarkastellaan myös automaatioon pohjautuvan säädön käyttöönottoa lajittimen akseptimassan freenesvaihteluiden tasaamiseksi. Toisaalta tehdään myös suppea selvitys lajittimien energiankulutuksista erilaisilla roottorin pyörimisnopeuksilla. Tuotantokäytössä oleviin lajittimiin asennettujen invertterisäätöjen ja koepisteistä saatujen tulosten avulla voidaan todeta, että laskemalla roottorin pyörimisnopeutta voidaan lajittimessa tapahtuvaa freenespudotusta kasvattaa. Samalla saavutetaan hyötyjä myös muissa massan ominaisuuksissa, kuten vetolujuudessa. Automaattisäädön käyttöönotolla saavutetaan huomattavasti pienempi hajonta akseptimassan freeneksessä. Rejektilinjan lajittimissa hajonta lähes puolittui ja päälinjan lajittimissa päästiin noin kolmanneksen parannukseen. Energian kulutuksia tutkittaessa huomataan, että roottorin kierrosnopeutta alentamalla voidaan merkittävästi vähentää lajittimien energian kulutusta. Parhaassa tapauksessa voidaan säästää neljännes lajittelun energiakustannuksissa.

E-Business Intreoperability Frameworks for SMEs

Current e-business standards have been developed and used by large organizations to reduce clerical costs in business transactions by increased automation and higher level of business-to-business integration. Small and medium enterprises (SME's), however, cannot easily adopt these standards due to the SME's lacking the technical expertise and resources for implementing them. Still, large organizations increasingly require their business partners, most of which are SME's, to be able to interoperate by their chosen e-business standards. The research question for the study was, first, which of the existing e-business technologies are most SME-adoptable, and, second, how could those e-business technologies be made easier for SME's to implement. The study was conducted as a literature study that evaluated the available e-business frameworks and SME-oriented e-business architectures based on the implementation complexity and costs incurred for the SME adopter. The study found that only few e-business solutions are SMEadoptable. The technological approaches used in the solutions need to be improved on a number of areas, the most important of which is implementation complexity. The study revealed that this also applies to the special, SME-oriented e-business architectures, which are also still too difficult for SME's to implement. Based on these findings, a high-level e-business interoperability framework concept was proposed as the basis for future research to overcome the found implementation complexities for SME's.