Fatores Explicativos da Rendibilidade Anormal Anual das Ações das Empresas Cotadas no Mercado de Capitais Português

Objetivo: Um dos temas atuais de estudo da teoria financeira consiste na análise da relevância da informação existente no mercado de capitais na explicação da rendibilidade das ações das empresas. Na literatura teórica destacam-se quatro grandes grupos de variáveis que se mostram capazes de explicar a rendibilidade das ações das empresas no mercado de capitais, nomeadamente o grupo de variáveis específicas à empresa, o grupo de variáveis setoriais, o grupo de variáveis macroeconómicas e o grupo de variáveis específicas ao mercado de capitais. Esta problemática não pode ser dissociada da teoria dos mercados de capitais eficientes, sobre a qual têm versado vários estudos empíricos com o intuito de averiguarem a possibilidade dos preços de mercado das ações refletirem, de forma consistente, todas as informações relevantes disponíveis no mercado de capitais. Face ao exposto, o principal objetivo do presente trabalho traduz-se na análise do efeito de um conjunto de variáveis, divididas pelos quatro grandes grupos evidenciados na literatura, na explicação da rendibilidade das ações das empresas que cotizam na Euronext Lisboa. Esta análise pretende ser efetuada para a generalidade das empresas que cotizam no mercado de capitais português mas também para as empresas que integram o PSI 20. Desenho/metodologia/abordagem: Investigação quantitativa através da estimação de um modelo econométrico capaz de determinar os fatores explicativos da rendibilidade anormal anual das ações das empresas cotadas no mercado de capitais português. No estudo empírico foram utilizadas diferentes bases de dados, tendo em consideração as necessidades de 2 informação, quer específicas à empresa quer externas à mesma. Em concreto recorreu-se ao Sistema de Análise de Balanços Ibéricos (SABI), ao Instituto Nacional de Estatística (INE) e à Comissão do Mercado de Valores Mobiliários (CMVM). Resultados: Os resultados estimados sugerem que, na generalidade das empresas cotadas na Euronext Lisboa, existem variáveis estatisticamente significativas na explicação da rendibilidade anormal das ações das empresas em cada um dos quatro grandes grupos de variáveis independentes consideradas no estudo. Relativamente às empresas que integram o PSI 20, os resultados sugerem que, apesar de se manter o facto de existirem variáveis estatisticamente significativas na explicação da rendibilidade anormal das ações das empresas nos quatro grandes grupos de variáveis, existem alterações na significância estatística de algumas variáveis, quando se compara com os resultados obtidos para a generalidade das empresas cotadas na praça financeira portuguesa. Originalidade/valor: O presente trabalho procura dar um contributo no sentido de enriquecer a evidência empírica acerca dos fatores explicativos da rendibilidade apresentada pelas ações da empresa no mercado de capitais.

Purification of plasmid DNA for use in human gene therapy

Two key issues defined the focus of this research in manufacturing plasmid DNA for use In human gene therapy. First, the processing of E.coli bacterial cells to effect the separation of therapeutic plasmid DNA from cellular debris and adventitious material. Second, the affinity purification of the plasmid DNA in a Simple one-stage process. The need arises when considering the concerns that have been recently voiced by the FDA concerning the scalability and reproducibility of the current manufacturing processes in meeting the quality criteria of purity, potency, efficacy, and safety for a recombinant drug substance for use in humans. To develop a preliminary purification procedure, an EFD cross-flow micro-filtration module was assessed for its ability to effect the 20-fold concentration, 6-time diafiltration, and final clarification of the plasmid DNA from the subsequent cell lysate that is derived from a 1 liter E.coli bacterial cell culture. Historically, the employment of cross-flow filtration modules within procedures for harvesting cells from bacterial cultures have failed to reach the required standards dictated by existing continuous centrifuge technologies, frequently resulting in the rapid blinding of the membrane with bacterial cells that substantially reduces the permeate flux. By challenging the EFD module, containing six helical wound tubular membranes promoting centrifugal instabilities known as Dean vortices, with distilled water between the Dean number's of 187Dn and 818Dn,and the transmembrane pressures (TMP) of 0 to 5 psi. The data demonstrated that the fluid dynamics significantly influenced the permeation rate, displaying a maximum at 227Dn (312 Imh) and minimum at 818Dn (130 Imh) for a transmembrane pressure of 1 psi. Numerical studies indicated that the initial increase and subsequent decrease resulted from a competition between the centrifugal and viscous forces that create the Dean vortices. At Dean numbers between 187Dn and 227Dn , the forces combine constructively to increase the apparent strength and influence of the Dean vortices. However, as the Dean number in increases above 227 On the centrifugal force dominates the viscous forces, compressing the Dean vortices into the membrane walls and reducing their influence on the radial transmembrane pressure i.e. the permeate flux reduced. When investigating the action of the Dean vortices in controlling tile fouling rate of E.coli bacterial cells, it was demonstrated that the optimum cross-flow rate at which to effect the concentration of a bacterial cell culture was 579Dn and 3 psi TMP, processing in excess of 400 Imh for 20 minutes (i.e., concentrating a 1L culture to 50 ml in 10 minutes at an average of 450 Imh). The data demonstrated that there was a conflict between the Dean number at which the shear rate could control the cell fouling, and the Dean number at which tile optimum flux enhancement was found. Hence, the internal geometry of the EFD module was shown to sub-optimal for this application. At 579Dn and 3 psi TMP, the 6-fold diafiltration was shown to occupy 3.6 minutes of process time, processing at an average flux of 400 Imh. Again, at 579Dn and 3 psi TMP the clarification of the plasmid from tile resulting freeze-thaw cell lysate was achieved at 120 Iml1, passing 83% (2,5 mg) of the plasmid DNA (6,3 ng μ-1 10.8 mg of genomic DNA (∼23,00 Obp, 36 ng μ-1 ), and 7.2 mg of cellular proteins (5-100 kDa, 21.4 ngμ-1 ) into the post-EFD process stream. Hence the EFD module was shown to be effective, achieving the desired objectives in approximately 25 minutes. On the basis of its ability to intercalate into low molecular weight dsDNA present in dilute cell lysates, and be electrophoresed through agarose, the fluorophore PicoGreen was selected for the development of a suitable dsDNA assay. It was assesseel for its accuracy, and reliability, In determining the concentration and identity of DNA present in samples that were eleclrophoresed through agarose gels. The signal emitted by intercalated PicoGreen was shown to be constant and linear, and that the mobility of the PicaGreen-DNA complex was not affected by the intercalation. Concerning the secondary purification procedure, various anion-exchange membranes were assessed for their ability to capture plasmid DNA from the post-EFD process stream. For a commercially available Sartorius Sartobind Q15 membrane, the reduction in the equilibriumbinding capacity for  ctDNA in buffer of increasing ionic demonstrated that DNA was being.adsorbed by electrostatic  interactions only. However, the problems associated with fluid distribution across the membrane demonstrated that the membrane housing was the predominant cause of the .erratic breakthrough curves. Consequently, this would need to be rectified before such a membrane could be integrated into the current system, or indeed be scaled beyond laboratory scale. However, when challenged with the process material, the data showed that considerable quantities of protein (1150 μg) were adsorbed preferentially to the plasmid DNA (44 μg). This was also shown for derived Pall Gelman UltraBind US450 membranes that had been functionalised by varying molecular weight poly-L~lysine and polyethyleneimine ligands. Hence the anion-exchange membranes were shown to be ineffective in capturing plasmid DNA from the process stream. Finally, work was performed to integrate a sequence-specific DNA·binding protein into a single-stage DNA chromatography, isolating plasmid DNA from E.coli cells whilst minimising the contamination from genomic DNA and cellular protein. Preliminary work demonstrated that the fusion protein was capable of isolating pUC19 DNA into which the recognition sequence for the fusion-protein had been inserted (pTS DNA) when in the presence of the conditioned process material. Althougth the pTS recognition sequence differs from native pUC19 sequences by only 2 bp, the fusion protein was shown to act as a highly selective affinity ligand for pTS DNA alone. Subsequently, the scale of the process was scaled 25-fold and positioned directly following the EFD system. In conclusion, the integration of the EFD micro-filtration system and zinc-finger affinity purification technique resulted in the capture of approximately 1 mg of plasmid DNA was purified from 1L of E.coli  culture in a simple two stage process, resulting in the complete removal of genomic DNA and 96.7% of cellular protein in less than 1 hour of process time.

The effect of blending on selected physical properties of crude oils and their products

A study was made of the effect of blending practice upon selected physical properties of crude oils, and of various base oils and petroleum products, using a range of binary mixtures. The crudes comprised light, medium and heavy Kuwait crude oils. The properties included kinematic viscosity, pour point, boiling point and Reid vapour pressure. The literature related to the prediction of these properties, and the changes reported to occur on blending, was critically reviewed as a preliminary to the study. The kinematic viscosity of petroleum oils in general exhibited non-ideal behaviour upon blending. A mechanism was proposed for this behaviour which took into account the effect of asphaltenes content. A correlation was developed, as a modification of Grunberg's equation, to predict the viscosities of binary mixtures of petroleum oils. A correlation was also developed to predict the viscosities of ternary mixtures. This correlation showed better agreement with experimental data (< 6% deviation for crude oils and 2.0% for base oils) than currently-used methods, i.e. ASTM and Refutas methods. An investigation was made of the effect of temperature on the viscosities of crude oils and petroleum products at atmospheric pressure. The effect of pressure on the viscosity of crude oil was also studied. A correlation was developed to predict the viscosity at high pressures (up to 8000 psi), which gave significantly better agreement with the experimental data than the current method due to Kouzel (5.2% and 6.0% deviation for the binary and ternary mixtures respectively). Eyring's theory of viscous flow was critically investigated, and a modification was proposed which extends its application to petroleum oils. The effect of blending on the pour points of selected petroleum oils was studied together with the effect of wax formation and asphaltenes content. Depression of the pour point was always obtained with crude oil binary mixtures. A mechanism was proposed to explain the pour point behaviour of the different binary mixtures. The effects of blending on the boiling point ranges and Reid vapour pressures of binary mixtures of petroleum oils were investigated. The boiling point range exhibited ideal behaviour but the R.V.P. showed negative deviations from it in all cases. Molecular weights of these mixtures were ideal, but the densities and molar volumes were not. The stability of the various crude oil binary mixtures, in terms of viscosity, was studied over a temperature range of 1oC - 30oC for up to 12 weeks. Good stability was found in most cases.

The atomisation of detergent slurries

A study was made to determine the conditions under which the optimum droplet size distribution (ie., narrowest size range with a minimum of fines and over-sized agglomerates), is generated in sprays from centrifugal pressure nozzles. A range of non-Newtonian detergent slurries were tested but the results are of wider application and parallel work was undertaken with water, ionic solutions and chalk slurries. Six centrifugal pressure nozzles were used and the drop-size distributions correlated as a function of fluid properties, pressure, fiowrate, feed temperature, and nozzle characteristics. Measurements were made using a Malvern Particle Size Anayser slung across a specially-designed transparent tower section of approximately 1.2m diameter in order to reduce obscuration caused by the spray and improve existing droplet sizing techniques. The results obtained were based upon the Rosin-Rammler distribution model and the Size Analyser provided a direct print-out of size distribution and the parameters characterising it. A Spraying System nozzle, AAASSTC8-8, produced the optimum spray distribution with the detergent slurry at a temperature of 60°C whilst operating at 1200 psi. With other fluids the Delevan 2.2SJ nozzle produced the optimum spray distribution operating at 1200 psi but with the Spraying Systems nozzles there was no clear-cut optimum set of conditions, ie. the nozzle and pressure varied depending upon the fluid being sprayed. The mechanisms of liquid sheet break-up and droplet dispersion were investigated in specially-constructed, scaled-up, transparent nozzles. A mathematical model of centrifugal pressure nozzle atomisation was developed based upon fundamental operating parameters rather than resorting to empirical correlations. This enabled theoretical predictions to be made over a wide range of operating conditions and nozzle types. The model predictions for volumetric fiowrate, liquid sheet length and air core diameter showed good agreement with the experimentally determined results. However, the model predicted smaller droplet sizes than were produced experimentally due to inaccuracies identified in the initial assumptions.

Some Completely Monotonic Properties for the (p, g)-Gamma Function

MSC 2010: 33B15, 26A51, 26A48

Identifying DNA-binding proteins by combining support vector machine and PSSM distance transformation

Background: DNA-binding proteins play a pivotal role in various intra- and extra-cellular activities ranging from DNA replication to gene expression control. Identification of DNA-binding proteins is one of the major challenges in the field of genome annotation. There have been several computational methods proposed in the literature to deal with the DNA-binding protein identification. However, most of them can't provide an invaluable knowledge base for our understanding of DNA-protein interactions. Results: We firstly presented a new protein sequence encoding method called PSSM Distance Transformation, and then constructed a DNA-binding protein identification method (SVM-PSSM-DT) by combining PSSM Distance Transformation with support vector machine (SVM). First, the PSSM profiles are generated by using the PSI-BLAST program to search the non-redundant (NR) database. Next, the PSSM profiles are transformed into uniform numeric representations appropriately by distance transformation scheme. Lastly, the resulting uniform numeric representations are inputted into a SVM classifier for prediction. Thus whether a sequence can bind to DNA or not can be determined. In benchmark test on 525 DNA-binding and 550 non DNA-binding proteins using jackknife validation, the present model achieved an ACC of 79.96%, MCC of 0.622 and AUC of 86.50%. This performance is considerably better than most of the existing state-of-the-art predictive methods. When tested on a recently constructed independent dataset PDB186, SVM-PSSM-DT also achieved the best performance with ACC of 80.00%, MCC of 0.647 and AUC of 87.40%, and outperformed some existing state-of-the-art methods. Conclusions: The experiment results demonstrate that PSSM Distance Transformation is an available protein sequence encoding method and SVM-PSSM-DT is a useful tool for identifying the DNA-binding proteins. A user-friendly web-server of SVM-PSSM-DT was constructed, which is freely accessible to the public at the web-site on http://bioinformatics.hitsz.edu.cn/PSSM-DT/.

Multi-media filtration for removal of petroleum contamination

A pilot scale multi-media filtration system was used to evaluate the effectiveness of filtration in removing petroleum hydrocarbons from a source water contaminated with diesel fuel. Source water was artificially prepared by mixing bentonite clay and tap water to produce a turbidity range of 10-15 NTU. Diesel fuel concentrations of 150 ppm or 750 ppm were used to contaminate the source water. The coagulants used included Cat Floc K-10 and Cat Floc T-2. The experimental phase was conducted under direct filtration conditions at constant head and constant rate filtration at 8.0 gpm. Filtration experiments were run until the filter reached its clogging point as noted by a measured peak pressure loss of 10 psi. The experimental variables include type of coagulant, oil concentration and source water. Filtration results were evaluated based on turbidity removal and petroleum hydrocarbon (PHC) removal efficiency as measured by gas chromatography. Experiments indicated that clogging was controlled by the clay loading on the filter and that inadequate destabilization of the contaminated water by the coagulant limited the PHC removal. ^

Synthesis of copper carbon nanotube composite and its electrical conductivity measurement

The matrices in which Multi Walled Carbon Nanotubes (MWCNTs) are incorporated to produce composites with improved electrical properties can be polymer, metal or metal oxide. Most composites containing CNTs are polymer based because of its flexibility in fabrication. Very few investigations have been focused on CNT-metal composites due to fabrication difficulties, such as achievement of homogeneous distribution of MWCNTs and poor interfacial bonding between MWCNTs and the metal matrix. In an effort to overcome poor interfacial bonding for the Cu - MWCNT composite, silver (Ag) and nickel (Ni) resinates have been incorporated in the ball milling stage. Composites of MWCNT (16, 12, and 8 Vol %) - Cu+Ag+Ni were pelleted at 20,000 psi (669.4 Mpa) and sintered at 950 °C. The electrical conductivity results measured by four probe meter showed that the conductivity decreases with increase in the porosity. Moreover from these results it can also be stated that an addition of optimum value of (12 Vol %) MWCNT leads to high electrical conductivity (9.26E+07 s-m"), which is 50% greater than the conductivity of Cu. It is anticipated that the conductivity can be increased substantially with hot isostatic pressing of the pellet.

Avaliação da influência de cinza da casca de arroz em cimentos para poços de petróleo submetidos à injeção de vapor

Reservoirs that present highly viscous oils require methods to aid in their recovery to the surface. The elev ated oil viscosity hinders its flow through porous media and conventional recovery methods have not obtained significant efficiency. As such, the injection of steam into the reservoir through an injection well has been the most widely used method of therma l recovery, for it allows elevated volumes of recovery due to the viscosity reduction of the oil, facilitating the oil’s mobility within the rock formation and consequently into the production well where it will be exploited. On the other hand, the injecti on of vapor not only affects the fluids found in the rock pores, but the entire structure that composes the well where it is injected due to the high temperatures used in the process. This temperature increment is conducted to the cement, found in the annu lus, responsible for the isolation of the well and the well casing. Temperatures above 110 ̊C create new fazes rich in calcium in the cement matrix, resulting in the reduction of its permeability and the consequential phenomenon of mechanical resistance ret rogression. These alterations generate faults in the cement, reducing the well’s hydraulic isolation, creating insecurity in the operations in which the well will be submitted as well as the reduction of its economic life span. As a way of reducing this re trograde effect, this study has the objective of evaluating the incorporation of rice husk ash as a mineral additive substitute of silica flour , commercially utilized as a source of silica to reduce the CaO/SiO 2 ratio in the cement pastes submitted to high temperatures in thermal recovery. Cement pastes were formulated containing 20 and 30% levels of ash, apart from the basic paste (water + cement) and a reference paste (water + cement + 40% silica flour) for comparison purposes. The tests were executed th rough compression resistance tests, X - Ray diffraction (XRD) techniques, thermogravimetry (TG), scanning electron microscopy (SEM) and chemical anal ysis BY X - ray fluorescence (EDS) on the pastes submitted to cure at low temperatures (45 ̊C) for 28 days following a cure at 280 ̊C and a pressure of 2,000 PSI for 3 days, simulating vapor injection. The results obtained show that the paste containing 30% r ice shell ash is satisfactory, obtaining mechanical resistance desired and equivalent to that of the paste containing 40% silica flour, since the products obtained were hydrated with low CaO/SiO 2 ratio, like the Tobermorita and Xonotlita fases, proving its applicability in well subject to vapor injection.

O Centro de Referência da Assistência Social e a Psicanálise: efeitos de uma escuta singularizada

This paper emerged from an experience of 18 months in the CRAS – Reference Center for Social Assistance – which aroused a question about the listening of the singularity in the professional practice of Psi in the context of social assistance. The literature review revealed, on the one hand, a series of studies that aim to a discussion about of the process of professional integration of psychologists in the field of social welfare, proposing and / or analyzing practices directed towards the psychosocial assistance directed to the group and for the assurance of rights, forming citizen subjects. On the other hand, supported by a psychoanalytic perspective, we found studies that point to the importance of the singularity listening considering the subjectivity and symbolic resources of those who seek help in Basic Assistance Service. In this perspective, we aim to analyze, in a posteriori, the effects of offering a singularized listening in the context of CRAS and discuss its implications for the Psi professional practice in social institution. This is a theoretical and clinical research, based on Freudian and Lacanian psychoanalysis, in which two cases, placed as investigation boosters, are analyzed in the light of the concept of the subject. We conclude that a singularized listening allowed a significant sliding and the consequent repositioning of the subject, in each case, front to their suffering. The effects collected allowed us to affirm the importance of a singular listening in the treatment of the demands that appear within the institutional framework

Cartografia do trabalho de agentes penitenciários: reflexão sobre o “dispositivo prisão”

The Brazilian prison system is going through a serious crisis, not only due to the growth in the number of prisoners and the consequent overcrowding of prisons, but also for the violation of human rights, institutionalization and difficulty in social rehabilitation of inmates. Furthermore, the harmful effects of the prison system affect their workers, who generally are not prioritized by researchers, health programs and government policies. The literature pointing to some consequences of work in prison, among them, the mental illness, stress, alcohol abuse, etc., but little is known about this profession, their problems, the difficulties of their work routine, so as subjective processes involved. So, what are the effects of this work in the prison in the lives of correctional officers? What strategies developed to address the work in prison? This research aims to analyze the effects of this work in the prison in the lives of correctional officers from the state prison in Parnamirim, located in the metropolitan region of Natal-RN. Within the theoretical and methodological perspective of institutional analysis and cartography were carried conversation circles, interviews, in addition to participant observation of the correctional officers work’s routine. The results point to a working routine marked by the performance of procedures that involve risk to the worker, generating situations of tension and stress. Besides, the culture of violence (which is implemented in jail everyday) as well as the training and initial learning of the profession, are responsible for the militarization process of the subjectivities of the correctional officers, producing hard subject, disciplined, stiff, likely to violent practices and other rights violations. Other mapped effects relate to the acquisition of knowledge about the human (“psy” knowledge) responsible for forging the conception of the criminal as "dangerous subject", which, in turn, acts as subjectivity vector in the daily life of prison guards by setting up a way of life crossed by fear and insecurity outside the work environment. Produces a control in the open about their lives and their families, limiting them with regard to family and community life and the realization of leisure activities in public spaces. In this sense, it appears that the arrest acts producing “bad meetings” (from Espinosa's perspective), once it produces sad affections responsible for weakening the conatus, limiting the possibilities of action of these subjects. Although agents develop some strategies to deal with the difficulties of working in prison (among which stand out the development of other professional or leisure activities, spirituality / religiosity and the ability to separate the labor moments from those of their the personal lives, is advocated that such strategies do not offer significant resistance, since they do not question the contemporary legal-criminal logic. The thesis presented supports the proposals of penal abolitionism to present other conceptions of crime and justice through the invention of other practical and conceptual strategies.

Fatores que influenciam a predisposição dos usuários em aderir a uma política de segurança da informação

The information constitutes one of the most valuable strategic assets for the organization. However, the organizational environment in which it is inserted is very complex and heterogeneous, making emerging issues relevant to the Governance of information technology (IT) and Information Security. Academic Studies and market surveys indicate that the origin of most accidents with the information assets is the behavior of people organization itself rather than external attacks. Taking as a basis the promotion of a culture of safety among users and ensuring the protection of information in their properties of confidentiality, integrity and availability, organizations must establish its Information Security Policy (PSI). This policy is to formalise the guidelines in relation to the security of corporate information resources, in order to avoid that the asset vulnerabilities are exploited by threats and can bring negative consequences to the business. But, for the PSI being effective, it is required that the user have readiness to accept and follow the procedures and safety standards. In the light of this context, the present study aims to investigate what are the motivators extrinsic and intrinsic that affect the willingness of the user to be in accordance with the organization's security policies. The theoretical framework addresses issues related to IT Governance, Information Security, Theory of deterrence, Motivation and Behavior Pro-social. It was created a theoretical model based on the studies of Herath and Rao (2009) and D'Arcy, Hovav and Galletta (2009) that are based on General Deterrence Theory and propose the following influencing factors in compliance with the Policy: Severity of Punishment, Certainty of Detection, Peer Behaviour, Normative Beliefs, Perceived Effectiveness and Moral Commitment. The research used a quantitative approach, descriptive. The data were collected through a questionnaire with 18 variables with a Likert scale of five points representing the influencing factors proposed by the theory. The sample was composed of 391 students entering the courses from the Center for Applied Social Sciences of the Universidade Federal do Rio Grande do Norte. For the data analysis, were adopted the techniques of Exploratory Factor Analysis, Analysis of Cluster hierarchical and nonhierarchical, Logistic Regression and Multiple Linear Regression. As main results, it is noteworthy that the factor severity of punishment is what contributes the most to the theoretical model and also influences the division of the sample between users more predisposed and less prone. As practical implication, the research model applied allows organizations to provide users less prone and, with them, to carry out actions of awareness and training directed and write Security Policies more effective.

Estudo da redução de arrasto induzido por polímeros em escoamentos internos turbulentos em dutos

The flows turbulent and laminar are present in various applications of engineering and one of the villain of energy loss big is the surface friction. Currently, there are several research aimed for the study of reducing drag (DR) with the objective of developing effective methods to reduce the friction. Regardless of numerous research carried out until today, the phenomenon DR still remains in study not it is fully understood. This paper studied the drag reduction by polymer induction in turbulent internal flows in ducts. We constructed a testing bench to perform the analysis of drag reduction, the bench has basically two manometers with a 8.5 psi full scale, a peripheral pump 0.5 HP, an acrylic tank, valves and tubes pvc and is situated in the Laboratory Fluid Mechanics UFRN. Were used as polymer additives to polyethylene glycol 4000, the Polyox WSR N60K, Polyox WSR 301 and Polyox WSR 205. The rationale for the choice of these polymers is their wide application in situations requiring greater energy efficiency, such as the addition reducing polymers for the jet used by the fire department to achieve greater distances. The induced drag reduction polymers is investigated from the turbulent flow analysis, with Reynolds number in a range between 2×104

Estudo da redução de arrasto induzido por polímeros em escoamentos internos turbulentos em dutos

The flows turbulent and laminar are present in various applications of engineering and one of the villain of energy loss big is the surface friction. Currently, there are several research aimed for the study of reducing drag (DR) with the objective of developing effective methods to reduce the friction. Regardless of numerous research carried out until today, the phenomenon DR still remains in study not it is fully understood. This paper studied the drag reduction by polymer induction in turbulent internal flows in ducts. We constructed a testing bench to perform the analysis of drag reduction, the bench has basically two manometers with a 8.5 psi full scale, a peripheral pump 0.5 HP, an acrylic tank, valves and tubes pvc and is situated in the Laboratory Fluid Mechanics UFRN. Were used as polymer additives to polyethylene glycol 4000, the Polyox WSR N60K, Polyox WSR 301 and Polyox WSR 205. The rationale for the choice of these polymers is their wide application in situations requiring greater energy efficiency, such as the addition reducing polymers for the jet used by the fire department to achieve greater distances. The induced drag reduction polymers is investigated from the turbulent flow analysis, with Reynolds number in a range between 2×104

Bayesian adaptive estimation of arbitrary points on a psychometric function

Bayesian adaptive methods have been extensively used in psychophysics to estimate the point at which performance on a task attains arbitrary percentage levels, although the statistical properties of these estimators have never been assessed. We used simulation techniques to determine the small-sample properties of Bayesian estimators of arbitrary performance points, specifically addressing the issues of bias and precision as a function of the target percentage level. The study covered three major types of psychophysical task (yes-no detection, 2AFC discrimination and 2AFC detection) and explored the entire range of target performance levels allowed for by each task. Other factors included in the study were the form and parameters of the actual psychometric function Psi, the form and parameters of the model function M assumed in the Bayesian method, and the location of Psi within the parameter space. Our results indicate that Bayesian adaptive methods render unbiased estimators of any arbitrary point on psi only when M=Psi, and otherwise they yield bias whose magnitude can be considerable as the target level moves away from the midpoint of the range of Psi. The standard error of the estimator also increases as the target level approaches extreme values whether or not M=Psi. Contrary to widespread belief, neither the performance level at which bias is null nor that at which standard error is minimal can be predicted by the sweat factor. A closed-form expression nevertheless gives a reasonable fit to data describing the dependence of standard error on number of trials and target level, which allows determination of the number of trials that must be administered to obtain estimates with prescribed precision.