Display of cell surface sites for fibronectin assembly is modulated by cell adherence to (1)F3 and C-terminal modules of fibronectin.

BACKGROUND: Fibronectin-null cells assemble soluble fibronectin shortly after adherence to a substrate coated with intact fibronectin but not when adherent to the cell-binding domain of fibronectin (modules (7)F3-(10)F3). Interactions of adherent cells with regions of adsorbed fibronectin other than modules (7)F3-(10)F3, therefore, are required for early display of the cell surface sites that initiate and direct fibronectin assembly. METHODOLOGY/PRINCIPAL FINDINGS: To identify these regions, coatings of proteolytically derived or recombinant pieces of fibronectin containing modules in addition to (7)F3-(10)F3 were tested for effects on fibronectin assembly by adherent fibronectin-null fibroblasts. Pieces as large as one comprising modules (2)F3-(14)F3, which include the heparin-binding and cell adhesion domains, were not effective in supporting fibronectin assembly. Addition of module (1)F3 or the C-terminal modules to modules (2)F3-(14)F3 resulted in some activity, and addition of both (1)F3 and the C-terminal modules resulted in a construct, (1)F3-C, that best mimicked the activity of a coating of intact fibronectin. Constructs (1)F3-C V0, (1)F3-C V64, and (1)F3-C Delta(V(15)F3(10)F1) were all able to support fibronectin assembly, suggesting that (1)F3 through (11)F1 and/or (12)F1 were important for activity. Coatings in which the active parts of (1)F3-C were present in different proteins were much less active than intact (1)F3-C. CONCLUSIONS: These results suggest that (1)F3 acts together with C-terminal modules to induce display of fibronectin assembly sites on adherent cells.

Real-time decision aid display

Gemstone Team Future Firefighting Advancements

When the library is located in prime real estate: a case study on the loss of space from the Duke University Medical Center Library and Archives.

The Duke University Medical Center Library and Archives is located in the heart of the Duke Medicine campus, surrounded by Duke Hospital, ambulatory clinics, and numerous research facilities. Its location is considered prime real estate, given its adjacency to patient care, research, and educational activities. In 2005, the Duke University Library Space Planning Committee had recommended creating a learning center in the library that would support a variety of educational activities. However, the health system needed to convert the library's top floor into office space to make way for expansion of the hospital and cancer center. The library had only five months to plan the storage and consolidation of its journal and book collections, while working with the facilities design office and architect on the replacement of key user spaces on the top floor. Library staff worked together to develop plans for storing, weeding, and consolidating the collections and provided input into renovation plans for users spaces on its mezzanine level. The library lost 15,238 square feet (29%) of its net assignable square footage and a total of 16,897 (30%) gross square feet. This included 50% of the total space allotted to collections and over 15% of user spaces. The top-floor space now houses offices for Duke Medicine oncology faculty and staff. By storing a large portion of its collection off-site, the library was able to remove more stacks on the remaining stack level and convert them to user spaces, a long-term goal for the library. Additional space on the mezzanine level had to be converted to replace lost study and conference room spaces. While this project did not match the recommended space plans for the library, it underscored the need for the library to think creatively about the future of its facility and to work toward a more cohesive master plan.

Trends in hospital librarianship and hospital library services: 1989 to 2006.

OBJECTIVE: The research studied the status of hospital librarians and library services to better inform the Medical Library Association's advocacy activities. METHODS: The Vital Pathways Survey Subcommittee of the Task Force on Vital Pathways for Hospital Librarians distributed a web-based survey to hospital librarians and academic health sciences library directors. The survey results were compared to data collected in a 1989 survey of hospital libraries by the American Hospital Association in order to identify any trends in hospital libraries, roles of librarians, and library services. A web-based hospital library report form based on the survey questions was also developed to more quickly identify changes in the status of hospital libraries on an ongoing basis. RESULTS: The greatest change in library services between 1989 and 2005/06 was in the area of access to information, with 40% more of the respondents providing access to commercial online services, 100% more providing access to Internet resources, and 28% more providing training in database searching and use of information resources. Twenty-nine percent (n = 587) of the 2005/06 respondents reported a decrease in staff over the last 5 years. CONCLUSIONS: Survey data support reported trends of consolidation of hospitals and hospital libraries and additions of new services. These services have likely required librarians to acquire new skills. It is hoped that future surveys will be undertaken to continue to study these trends.

JOACHIM, BRAHMS, AND SCHUMANN: THE FLOURSHING OF NINETEENTHCENTURY VIOLIN REPERTOIRE

The cultivation of violin repertoire and its ultimate dominance of the late Nineteenth-Century orchestral library are best examined through the analysis and study of the works of Joseph Joachim (1831-1907), Johannes Brahms (1833-1897), and Robert Schumann (1810-1856). Each of these men, in their own right, made significant contributions to the development of violin repertoire during the latter half of the Nineteenth Century. Yet their achievements were also the result of a collaborative effort and shared influence, the absence of which would have yielded a diminutive musical landscape, especially in the concerti of Brahms and Joachim. This dissertation explores Joachim’s technical dexterity and its influence on Brahms and Schumann, and further studies the vital role Brahms and Schumann played in forming Joachim as both composer and editor. The pieces examined in this dissertation evidence the significant influence each of these composers shared. Three chamber compositions stand as guideposts in the analysis and establish a stylistic foundation to collaborative efforts among Joachim, Brahms, and Schumann. The preliminary recital focuses on these chamber pieces which illustrate the individual style of each composer, featuring Joachim’s Romance, Op. 2, written between 1848 and 1852, Schumann’s Second Sonata, Op. 121, written in 1851, and Brahms’ Second Sonata, Op. 100, written in 1886. A second performance includes the enigmatic F-A-E Sonata of Brahms, Schumann, and Albert Deitrich, Schumann’s pupil, as well as Joachim’s Second Concerto. A collaborative effort, the F-A-E Sonata represents Brahms’ and Schumann’s efforts to write with Joachim’s unbridled style and technique in mind. An even greater musical offering, Joachim’s Second Concerto, a gift to Brahms in 1860, has been called the “Holy Grail” of concertos, and is considered the preeminent display of Joachim’s creative genius by incorporating demanding technical challenges and Hungarian-like overtones. The third and final program features Brahms’ Concerto in D Major. A fitting response to Joachim’s gift 17 years later, Brahms’ Concerto was written for Joachim at the height of his career, bearing the performer’s stylistic elements throughout. The recital also includes various Hungarian Dances by Brahms. While the Dances were not original to Brahms, they further illustrate the underlying idiom of Hungarian folk music in both Brahms’ and Joachim’s art.

TEACHING HIGH SCHOOL STUDENTS THE BEST CHORAL REPERTOIRE FROM THE GREAT COMPOSERS: MASTERWORKS AVAILABLE FOR IMMEDIATE, FREE ACCESS FROM THE CHORAL PUBLIC DOMAIN LIBRARY

Studying the choral works of the great composers of the past is always a worthy endeavor. For those aspiring to create an excellent high school choral program, it is critical to a student's musical foundation and heritage. Choral educators who teach high school are often bombarded with the most recently published new choral works, when they have a trove of excellent pieces right at their fingertips through websites like the Choral Public Domain Library (CPDL), all available at no cost. This project will explore the pedagogical reasons why this canon of public domain choral music should be taught at the high school level. A thorough guide to CPDL and an anthology of 200 works available on CPDL will provide the conductor with resources for programming this music. Though choral music in the public domain is free to all, publishers still publish this music and adhere copyright claims. This can create mistrust of legitimate editions on CPDL; why are they available at no cost when publishers are claiming copyright on similar editions? These issues will be thoroughly discussed in this project. For any given work on CPDL, there may be multiple editions available on the site. Choosing the right edition requires knowledge about basic editorial principles, especially for works written during the Renaissance period. A detailed discussion of these principles will provide the conductor with the tools needed to choose the best edition for his or her ensemble.

On the structural alterations of phage proteins synthesized in the presence of pancreatic ribonuclease.

Journal Article

Dynamic load-balancing of finite element applications with the DRAMA library

The DRAMA library, developed within the European Commission funded (ESPRIT) project DRAMA, supports dynamic load-balancing for parallel (message-passing) mesh-based applications. The target applications are those with dynamic and solution-adaptive features. The focus within the DRAMA project was on finite element simulation codes for structural mechanics. An introduction to the DRAMA library will illustrate that the very general cost model and the interface designed specifically for application requirements provide simplified and effective access to a range of parallel partitioners. The main body of the paper will demonstrate the ability to provide dynamic load-balancing for parallel FEM problems that include: adaptive meshing, re-meshing, the need for multi-phase partitioning.

CAPLib - A 'thin layer' message passing library to support computational mechanics codes on distributed memory parallel systems

The Computer Aided Parallelisation Tools (CAPTools) [Ierotheou, C, Johnson SP, Cross M, Leggett PF, Computer aided parallelisation tools (CAPTools)-conceptual overview and performance on the parallelisation of structured mesh codes, Parallel Computing, 1996;22:163±195] is a set of interactive tools aimed to provide automatic parallelisation of serial FORTRAN Computational Mechanics (CM) programs. CAPTools analyses the user's serial code and then through stages of array partitioning, mask and communication calculation, generates parallel SPMD (Single Program Multiple Data) messages passing FORTRAN. The parallel code generated by CAPTools contains calls to a collection of routines that form the CAPTools communications Library (CAPLib). The library provides a portable layer and user friendly abstraction over the underlying parallel environment. CAPLib contains optimised message passing routines for data exchange between parallel processes and other utility routines for parallel execution control, initialisation and debugging. By compiling and linking with different implementations of the library, the user is able to run on many different parallel environments. Even with today's parallel systems the concept of a single version of a parallel application code is more of an aspiration than a reality. However for CM codes the data partitioning SPMD paradigm requires a relatively small set of message-passing communication calls. This set can be implemented as an intermediate `thin layer' library of message-passing calls that enables the parallel code (especially that generated automatically by a parallelisation tool such as CAPTools) to be as generic as possible. CAPLib is just such a `thin layer' message passing library that supports parallel CM codes, by mapping generic calls onto machine specific libraries (such as CRAY SHMEM) and portable general purpose libraries (such as PVM an MPI). This paper describe CAPLib together with its three perceived advantages over other routes: - as a high level abstraction, it is both easy to understand (especially when generated automatically by tools) and to implement by hand, for the CM community (who are not generally parallel computing specialists); - the one parallel version of the application code is truly generic and portable; - the parallel application can readily utilise whatever message passing libraries on a given machine yield optimum performance.

The collection of pre-evacuation times from evacuation trials involving a Hospital Outpatient area and a University Library facility

This paper presents data relating to occupant pre-evacuation times from a university and a hospital outpatient facility. Although the two structures are entirely different they do employ relatively similar procedures: members of staff sweeping areas of the structure to encourage individuals to evacuate. However, the manner in which the dependent population reacts to these procedures is quite different. In the hospital case the patients only evacuated once a member of the nursing staff had instructed them to do so while in the university evacuation the students were less dependent upon the actions of the staff with over 50% of them evacuating with no prior prompting. Although this data may be useful in a variety of areas, it was collected primarily for use within evacuation models.

A policy-definition language and prototype implementation library for policy-based autonomic systems

This paper presents work towards generic policy toolkit support for autonomic computing systems in which the policies themselves can be adapted dynamically and automatically. The work is motivated by three needs: the need for longer-term policy-based adaptation where the policy itself is dynamically adapted to continually maintain or improve its effectiveness despite changing environmental conditions; the need to enable non autonomics-expert practitioners to embed self-managing behaviours with low cost and risk; and the need for adaptive policy mechanisms that are easy to deploy into legacy code. A policy definition language is presented; designed to permit powerful expression of self-managing behaviours. The language is very flexible through the use of simple yet expressive syntax and semantics, and facilitates a very diverse policy behaviour space through both hierarchical and recursive uses of language elements. A prototype library implementation of the policy support mechanisms is described. The library reads and writes policies in well-formed XML script. The implementation extends the state of the art in policy-based autonomics through innovations which include support for multiple policy versions of a given policy type, multiple configuration templates, and meta-policies to dynamically select between policy instances and templates. Most significantly, the scheme supports hot-swapping between policy instances. To illustrate the feasibility and generalised applicability of these tools, two dissimilar example deployment scenarios are examined. The first is taken from an exploratory implementation of self-managing parallel processing, and is used to demonstrate the simple and efficient use of the tools. The second example demonstrates more-advanced functionality, in the context of an envisioned multi-policy stock trading scheme which is sensitive to environmental volatility

Analysis of the thermo mechanical effects on packaging process of performance enhanced AMLCD's and the optical performance of the display

The performance enhancement of AMLCD's has been hindered with problems encountered during the curing process, such as window framing and de-lamination of the glass and adhesive. A thermo-mechanical analysis using FEA was conducted to help optimise the design of the rugged display and enhance the optical performance.

Thermal analysis of LEDS for liquid crystal display's backlighting

This paper investigated the thermal design of the light emitting diode (LED)onto the board and its packaging. The LED was a 6-lead MultiLED with three chips designed for LCD backlighting and other lighting purposes. A 3D finite element model of this LED was built up and thermal analysis was carried out using the multi physics software package PHYSICA. The modeling results were presented as temperature distributions in each LED, and the predicted junction temperature was used for thermal resistance calculation. The results for the board structure indicated that (1) removing the foil attach decreased the thermal resistance, (2) Increasing the copper foil thickness reduced the thermal resistance. package design indicated that the SMT designed LED with integrated slug gave lower thermal resistance. Pb-free solder material gave lower thermal resistance and junction temperature when compared with conductive adhesive

Collection and analysis of pre-evacuation time data collected from evacuation trials conducted in library facilities in Brazil

Two evacuation trials were conducted within Brazilian library facilities by FSEG staff in January 2005. These trials represent one of the first such trials conducted in Brazil. The purpose of these evacuation trials was to collect pre-evacuation time data from a population with a cultural background different to that found in western Europe. In total some 34 pre-evacuation times were collected from the experiments and these ranged from 5 to 98 seconds with a mean pre-evacuation time of 46.7 seconds

Synthesis of cycloruthenated compounds as potential anticancer agents

A library of 19 cycloruthenated derivatives is constructed by making use of the well-known cyclometalation reaction. Their geometries are modified in a straightforward manner by addition of either mono- or bidentate ligands, such as bipyridine, phenanthroline, 1,2-bis(diphenylphosphanyl)ethane, dimethylphenylphosphane, triphenylphosphane, and 1,3,5-triaza-7-phosphatricyclo[3.3.1.1]decane (PTA) ligands, to cationic cycloruthenated centers. The antitumor properties of the compounds thus obtained are investigated in order to compare them with recently reported ruthenium complexes and cisplatin. IC50 values against mammalian cells (A-172, HCT-116, and RDM-4) are determined for the library compounds and some of them, such as those derived from orthoruthenated phenylpyridine and a bidentate N,N ligand, display activity of the same order of magnitude as cisplatin.