Estimativas da área da folha de figueiras 'Roxo de Valinhos' usando dimensões lineares do limbo foliar

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Mucoadhesive beads of gellan gum/pectin intended to controlled delivery of drugs

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estimativas de parâmetros genéticos para seleção precoce de clones de Eucalyptus para região com ocorrência de geadas

Further to increase the wood yield, is important goal of forest tree breeding the adaptation of clones through diverse environment, especially for soil and climate. Perennial tree species such as eucalypts, have a long life cycle and the frosts can occur and to be their limiting source of cultivation. The aim of the study was to determine the genetic variability and the genetic correlations between selection ages of clones cultivated in the municipality of Palma So la, SC, Brazil, where frosts are common in the winter. A clonal trial was set up in 2008 in Palma So la, by statistical design of randomized complete blocks considering 29 clones, six replications, six plants per plot, and 3.0m x 3.0 m spacing. The silvicultural characters of total plant height, diameter of breast height (dbh), and wood volume were evaluated through 24, 36, 48, and 60 months old. The deviance analysis and estimates of genetic parameters were based on the REML / BLUP genetic statistical procedure. Significant differences were observed for all traits in the deviance analysis. High correlations and statistically significant between characters were observed, indicating that the early selection will provide significant gains. Part of the clones USP/IPEF 64, USP/IPEF 78, USP/IPEF 52, USP/IPEF 68, and USP/IPEF 74) are potential to be used into the breeding programs and in commercial stands into the studied frost regions.

Estudo de comunidades de foraminíferos em manguezal do Rio Itapanhaú, Bertioga-SP, aplicado à reconstrução paleoambiental

Foraminifera scientific studies became, historically, of your apply in relative dating of rocks, stratigraphic correlations and paleoenvironmental reconstruction. In the last decades, they have been applied on the studies of modern ecosystems, with or without antrhopic influence. Both aspects are interest of petroleum industry. Among other approaches, foraminífera are used as good indicators of the fluctuation of relative sea level. This study aimed to survey and taxonomic study of the community structure of foraminifera in surface samples of a core, 60 cm, collected in mangrove located in Itapanhaú river in Bertioga (SP).It also aims to contribute to the discussion about typical patterns of community structure of mangrove margins and provide elements for discussion on the relative sea level behavior in this area in almost modern times. It was been collected 6 samples along the core of 60 cm of length, each one 10 cm depth. They were made in laboratory and in each sample sought to find at least 100 foraminifera per ml. The species identification was made with reference specified material and collection available on IGCE-UNESPetro, Rio Claro. The community structure was studied in terms of richness, diversity and species composition and was made the results comparison from similar areas to interpret the depositional environment. Were found 21 species within them 13 calcareous and 8 binders, being the most abundant and frequent species Ammonia tepida, Ammonia parkinsoniana e Elphidium spp. Essentially there wasn’t change in the community structure within the period covered by the core which reflects an environment of outer margin of mangrove without noticeable change in relative sea level at the respective time of deposition of muddy sediments. The community structure here recognized its similar to estuarine environment well maintained which indicates a low human impact in the area over the time interval. The agreement of the results...

Estudo teórico da contribuição à dose de partículas secundárias geradas por prótons de energias entre 100 e 200 MeV num Phantom de substituto de tecido MS20

The goal of this project is the reproduction, through the simulation code based on the MCNPX (Monte Carlo N-Particle eXtended) v2.50 method, of the proton beam interaction with the material, since, in proton therapy, only the particle ionization and excitation are analyzed and the occurence of nuclear interactive inelastic process are not considered. This work will help the development of studies concerning the contribution to the total dosis of secondary particles generated by nuclear interaction in proton therapy. They are: alpha particles ( ), deuterium(2H), tritium (3H), neutron (n) and helium (3He). A MS20 tissue substitute phantom was used as the target and the energy of the proton beams was within an interest range of 100 to 200MeV. With the results obtained, it was possible to generate graphics which allows the analysis of the dosis deposition relation with and without nuclear interaction, the percentage of secondary particles deposited dosis, the radial dispersion of neutrons in the material, the secondary particles multiplicity, as well as the relation between the secondary particles spectrum with the próton generated spectrum

Caracterização físico-mecânica de painel de MDP produzido com madeira de Eucalipto e Bracatinga

This work is the production of particleboard of particles reconstituted from MDP (Medium Density Particleboard) adding particles in the inner layer of Mimosa Scarelli, popularly known as bracatinga, the ratios of 0%, 25%, 50%, 75% and 100%. The panel produced is composed of three layers, two external particles with smaller particle size and an inner layer composed of particles of larger particle sizes. Assays were performed based on physical and mechanical NBR 14.810/2006 for the determination of the board density, thickness swelling, water absorption, moisture content, bending strength, shear strength and residual moisture, and testing of particle size not existing in the standard cited. The results were analyzed and compared the results of the commercial boards made from 100% eucalyptus, based on the limits specified by the ABNT NBR 14.810/2006. The values of the tests were close to the normative specifications indicating positively the production of MDP with wood decay.

Análise granulométrica do compósito cimentício produzido com adição de resíduos de madeira e escória

Since the early twenty-first century, the construction sector has been the second largest on the rise in the Brazilian industrial sector, with a growth of 1.4% in 2012, and is likely to remain at this level for a long time. However, unlike decades ago, the industry has been seeking in its manufacturing process, sustainable materials, encompassing in their works the concept of sustainability. Thus, the timber sector seeks to satisfy a market increasingly demanding, innovating techniques and utilization being less aggressive to the environment. The purpose of this study was to produce and evaluate the mechanical strength of the composite cement with the addition of wood residues and slag low oven. Therefore, it was made 42 specimen cement-slag-wood, carried out in two steps. Since at the first, it was varied only the slag particle size, and at the second, through the best result of the previous step, it was varied the wood particles granulometry. The mechanical performance of the composite was evaluated by the results obtained in the compression test and the physical test for determining the density of the material. In the first step of the process can be concluded that the best result was achieved with the use of slag particles retained on the 60 mesh sieve. In the second phase of the study concluded that the best results were achieved with wood particles with the large particles, i.e. particles retained on the 10 mesh sieve. Both in the first and in the second step it can be seen that there has been the influence of the particle size of the waste materials. With the obtained results, could be evaluated that the use of waste for the production of cement-slag-wood composite showed lower performance when compared to the results obtained in studies without the use of waste. However, some applications are feasible to be performed with the use of composite wood-cement-slag

Estudo comparativo de dois tipos de painéis de MDP: com adição de papel impregnado e lâminas de bambu

This work is the production of two types of particle boards reconstructed MDP (Medium Density Particleboard), the first with the addition, in the inner layer of particles of impregnated paper, the ratios of 0%, 1%, 5% and 20 %. In the second type of panel MDP was inserted with blades of bamboo species Dendrocalumus giganteus as coatings and structural reinforcement. The MDP panel, used as a basis for both cases has the composition of three layers, two external particles with smaller particle size and an inner layer composed of particles of larger particle sizes. Assays were performed based on physical and mechanical NBR 14.810/2006 for the determination of the board density, thickness swelling, water absorption, moisture content, bending, tension parallel and perpendicular, and testing of particle sizes of the particles did not exists in standard references. The results were analyzed and compared the results of the commercial boards made from 100% eucalyptus, based on the limits specified by the ABNT NBR 14.810/2006. The values of the tests showed similar results indicating normative specifications in a positive way, the possibility of production of MDP with the use of waste paper impregnated. As for the panel with bamboo blades, the tests showed a mechanical performance far superior to MDP market, explaining the study and possible implementation of the bamboo for use where the MDP will suffer greater mechanical stress, such as doors, tops and benches tables

Produção e caracterização físico-mecânica do compósito cimento-madeira com variação granulométrica dos resíduos lignocelulósicos

The need to reduce environmental damage and add value to waste causes more and more new alternatives appear to unite these two points. One of the main ways to achieve this in timber industries and the use of waste for making panels. This work was aimed at studying the influence of particle size and density in Eucalyptus mechanical compressive strength of cement composite wood. For this study was performed production and physico-mechanical characterization of specimens, using portland cement, water and waste eucalyptus. The methodology consists of a statistical study of the results obtained by calculating the density and axial compression tests and a subsequent comparison of these results with other studies. The results showed that there are significant differences in density and compressive strength when using different particle sizes the particles of eucalyptus. In general, the smaller the particle size, the lower the compression strength and the greater the density when the samples are produced with the same trait

Comprimidos de HPMC contendo nimesulida: preparação, caracterização e estudo dos mecanismos que regem a liberação do fármaco

The pharmaceutical innovations, such as the use of polymers to control drug release, create possibilities for a better action of the drug in the body, which causes a a more effective therapeutic effect and a safer treatment for the patient. In this work, were prepared and characterized matrix tablets of hydroxypropylmethylcellulose (HPMC) containing nimesulide as model drug to evaluate the performance as a controlled release system. HPMC, a cellulose ester, is a hydrophilic polymer that undergoes swelling, i.e., absorbs water and forms a gel layer controlling drug release. The characterization of powders was performed by analysis of particle size and morphology, density, compressibility index determination, flow properties and determination of swelling profile. The tablets were evaluated according to their physical parameters of quality and to the in vitro release of nimesulide, as well as the analysis of the mechanisms of drug release by appropriate mathematical models. The set of results showed that the HPMC/Nimesulide mixture exhibited satisfactory physical characteristics (size, shape, density and flow). The release profile demonstrated an effective control upon drug release in enteric environment and presented more correlation with Korsmeyer-Peppas’ and Weibull’s mathematical models, indicating that the release of nimesulide occurs through the relaxation of the polymer chains

Microwave-assisted hydrothermal synthesis of NiO-Ce1-XEuxO2-δ powders for fuel cell catalytic anodes

CeO2-based materials doped with rare earth (TR +3) can be used as alternative to traditional NiO-YSZ anodes in solid oxide fuel cells as they have higher ionic conductivity and lower ohmic losses compared to YSZ. Moreover, they allow fuel cell operation at lower temperatures (500-800°C). In the anode composition, the concentration of NiO acting as catalyst in YSZ provides high electrical conductivity and high electrochemical activity of reactions, promoting internal reform in the cell. In this work, NiO - Ce1-xEuxO2-δ compounds (x = 0.1, 0.2 and 0.3) have been synthesized by microwave-assisted hydrothermal method. The materials were characterized by TG, XRD, TPR and SEM-FEG techniques. The refinement of data obtained by X-ray diffraction showed the presence of ceria doped with europium crystallized in a cubic phase with fluorite structure, in addition to the presence of NiO. The microwave-assisted hydrothermal method showed significant reduction in the average particle size and good mass control of phase compositions compared to other chemical synthesis techniques.

Determinação de chumbo em tubos de raios catódicos e em solo contaminado por espectrometria de absorção atômica

Pós-graduação em Ciência dos Materiais - FEIS

Aplicação mecanizada de N-P-K individualizada na cultura da cana-de-açúcar

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Aspects correlates with Scandinavian Stroke Scale for predicting early neurological impairment

Objective: To investigate the correlation between the Alberta Program Early CT Score (ASPECTS) and the Scandinavian Stroke Scale (SSS) for the evaluation of neurological impairment in patients with acute stroke. Method: 59 patients with a first acute ischemic stroke were evaluated. The ASPECTS were evaluated by 2 neurologists at admission and by another neurologist after 48 hours. The NIHSS and SSS was applied to determinate stroke severity. Correlations and agreements were analysed statistically by Spearman and Kappa tests. Results: ASPECTS was correlated with National Institute of Health Stroke Scale (NIHSS) at admission (r = -0.52; p < 0.001) and SSS (r = 0.50; p < 0.001). The ASPECTS and SSS items were most correlated with arm (r = 0.52; p < 0.001) and hand (r = 0.49; p < 0.001) motor power, and speech (r = 0.51; p < 0.001). The SSS of 25.5 shows sensitivity (68%) and specificity (72%) when associated with ASPECTS <= 7. Conclusion: The SSS can predict worst neurological impairment when associated with lower values of ASPECTS.

Cyanobacteria in mangrove ecosystems

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)