Nutritional evaluation of some small coastal fish in Sri Lanka

Small pelagic fish play a very important role in human nutrition and health. Lipids of these fish differ remarkably from plant and other animal lipids. The aim of the study was to describe the proximate composition of thirty-three small pelagic fish species commonly available in Sri Lanka. Fish species were collected from Negombo and Chillaw fish landing sites and subjected to analysis for moisture, ash, protein and total lipid content. Tiger tooth croaker (Otolithus ruber) was found to have the highest moisture percentage (80.0%) followed by Clarias sp. (78.9%), Indian anchovy (Steloporus indicus) and Comerson's anchovy (Stelophorus commersonii), (78%). The lowest percentage of moisture, 69.4%, was recorded in white sardinella (Sardinella albella). Indian ilisha (Ilisha melastoma) was found to have the highest amount of ash (10.1%) followed by Otolithus sp. (8%) and big-eye barracuda contained the least amount (2.5%). Carassius Carassius, pick handle barracuda (Sphyraena jello) and Indian mackerel (Rastrelliger kanagurta) contained higher amounts of protein, 24.3, 20.6 and 19.2% respectively. The lowest protein content (10.1%) was found in Indian scad (Decapterus russelli). The protein content of the fish was in the range of 13-15%. The results revealed that the small fish are moderate protein sources. The total lipid content varied between 0.6-8%. White sardinella recorded the highest percentage of lipid (8%) where tiger tooth croaker contained the lowest percentage (0.6 %). The study showed high fatty species to contain low amount of moisture and vice versa establishing an inverse relation between fat and moisture quantitatively.

Laminar to turbulent flow transition measurements using an array of SOI-CMOS MEMS wall shear stress sensors

The successful utilization of an array of silicon on insulator complementary metal oxide semiconductor (SOICMOS) micro thermal shear stress sensors for flow measurements at macro-scale is demonstrated. The sensors use CMOS aluminum metallization as the sensing material and are embedded in low thermal conductivity silicon oxide membranes. They have been fabricated using a commercial 1 μm SOI-CMOS process and a post-CMOS DRIE back etch. The sensors with two different sizes were evaluated. The small sensors (18.5 ×18.5 μm2 sensing area on 266 × 266 μm2 oxide membrane) have an ultra low power (100 °C temperature rise at 6mW) and a small time constant of only 5.46 μs which corresponds to a cut-off frequency of 122 kHz. The large sensors (130 × 130 μm2 sensing area on 500 × 500 μm2 membrane) have a time constant of 9.82 μs (cut-off frequency of 67.9 kHz). The sensors' performance has proven to be robust under transonic and supersonic flow conditions. Also, they have successfully identified laminar, separated, transitional and turbulent boundary layers in a low speed flow. © 2008 IEEE.

Vibration and stress analysis in the presence of structural uncertainty

At medium to high frequencies the dynamic response of a built-up engineering system, such as an automobile, can be sensitive to small random manufacturing imperfections. Ideally the statistics of the system response in the presence of these uncertainties should be computed at the design stage, but in practice this is an extremely difficult task. In this paper a brief review of the methods available for the analysis of systems with uncertainty is presented, and attention is then focused on two particular "non- parametric" methods: statistical energy analysis (SEA), and the hybrid method. The main governing equations are presented, and a number of example applications are considered, ranging from academic benchmark studies to industrial design studies. © 2009 IOP Publishing Ltd.

Effects of gamma radiation on nutritional and microbial quality of Pampus chinensis (Euphrasen 1788)

To evaluate the efficiency of gamma radiation in combination with low temperature Chinese pomfret, Pampus chinensis were preserved by the treatment of different doses of gamma radiation (3, 5 and 8 KGy) at freezing temperature (-20°C) during 90 days of storage period. Quality assessments for fish were carried out at an interval of 15 days during the storage period. Quality assessments were done by organoleptic, chemical (Total Volatile Nitrogen, TVN and Trimethylamine, TMA) and microbiological (Total Bacterial Count, TBC and Total Mould Count, TMC) evaluation. From the analysis of all parameters, maximum shelf-life was observed for irradiated (8 KGy) sample. It remained acceptable up to 75 days and that was the highest duration among 4 types of samples.

Development of a universal stress sensor for graphene and carbon fibres

Carbon fibres are a significant volume fraction of modern structural airframes. Embedded into polymer matrices, they provide significant strength and stiffness gains by unit weight compared with competing structural materials. Here we use the Raman G peak to assess the response of carbon fibres to the application of strain, with reference to the response of graphene itself. Our data highlight the predominance of the in-plane graphene properties in all graphitic structures examined. A universal master plot relating the G peak strain sensitivity to tensile modulus of all types of carbon fibres, as well as graphene, is presented. We derive a universal value of - average - phonon shift rate with axial stress of around -5ω0 -1 (cm -1 Mpa-1), where ω0 is the G peak position at zero stress for both graphene and carbon fibre with annular morphology. The use of this for stress measurements in a variety of applications is discussed. © 2011 Macmillan Publishers Limited. All rights reserved.

An analysis of the cooperative mechano-sensitive feedback between intracellular signaling, focal adhesion development, and stress fiber contractility

Cells communicate with their external environment via focal adhesions and generate activation signals that in turn trigger the activity of the intracellular contractile machinery. These signals can be triggered by mechanical loading that gives rise to a cooperative feedback loop among signaling, focal adhesion formation, and cytoskeletal contractility, which in turn equilibrates with the applied mechanical loads. We devise a signaling model that couples stress fiber contractility and mechano-sensitive focal adhesion models to complete this above mentioned feedback loop. The signaling model is based on a biochemical pathway where IP3 molecules are generated when focal adhesions grow. These IP3 molecules diffuse through the cytosol leading to the opening of ion channels that disgorge Ca2+ from the endoplasmic reticulum leading to the activation of the actin/myosin contractile machinery. A simple numerical example is presented where a one-dimensional cell adhered to a rigid substrate is pulled at one end, and the evolution of the stress fiber activation signal, stress fiber concentrations, and focal adhesion distributions are investigated. We demonstrate that while it is sufficient to approximate the activation signal as spatially uniform due to the rapid diffusion of the IP3 through the cytosol, the level of the activation signal is sensitive to the rate of application of the mechanical loads. This suggests that ad hoc signaling models may not be able to capture the mechanical response of cells to a wide range of mechanical loading events. © 2011 American Society of Mechanical Engineers.

Enriched environment treatment counteracts enhanced addictive and depressive-like behavior induced by prenatal chronic stress

Prenatal stress can cause many long-term behavior changes in offspring, but whether prenatal stress can alter addictive behavior in offspring and postnatal enriched environment treatment (EE) can restore these changes are unknown. We reported here that pr

Assessment of nutritional quality of 'Shidal' a fermented fish product of northeast India

Shidal is a salt-free fermented fish product prepared from Puntius ss. caught in late monsoon period. Shidal is very popular amongst the inhabitants of Northeast India. The fermentation process of this product takes four to six months in anaerobic condition till the product gains a characteristic flavour and colour. Detailed studies on the biochemical and nutritive qualities of this product are very few. Therefore, in this paper we report the results of the proximate analysis, amino acid and fatty acid compositions. The results suggest that Shidal is a rich source of amino acids as well as of essential fatty acids like linoleic and linolenic acids. The n- 3/n-6 ratio was found 0.51.

Nutritional quality of some food fish

The proximate compositions and amino acid make-up of silver jew fish (Johnius argentatus), Indian halibut (Psettodes erumei), grey mullet (Mugil cephalus) and pearl spot (Etroplus suratensis) are reported. Calorific values of these fishes have been calculated from their proximate compositions and their amino acid make-up compared with the available data for beef and egg. From the study, pearl spot is adjudged to be the most nutritive among the fishes studied, followed by Indian halibut, grey mullet and silver jew fish.

Deposition and characterisation of ultralow-stress ZnO thin films for application in FBAR-based gravimetric biosensors

Zinc oxide (ZnO) thin films were deposited at high rates ( > 50 nm min-1) using a unique technique known as high target utilisation sputtering (HiTUS). The films obtained possess good crystallographic orientation, low surface roughness, very low stress and excellent piezoelectric properties. We have utilised the films to develop highly sensitive biosensors based on thickness longitudinal mode (TLM) thin film bulk acoustic resonators (FBARs). The FBARs have the fundamental TLM at a frequency near 1.5 GHz and quality factor Q higher than 1,000, which is one of the largest values ever reported for ZnO-based FBARs. Bovine Serum Albumin (BSA) solutions with different concentrations were placed on the top of different sets of identical FBARs and their responses to mass-loading from physically adsorbed protein coatings were investigated. These resonators demonstrated a high sensitivity and thus have a great potential as gravimetric sensors for biomedical applications. © 2011 Inderscience Enterprises Ltd.

Red and white meat of tuna (Euthynnus affinis): their biochemical role and nutritional quality

The biochemical and nutrient compositions of red and white meat of tuna are reported. Based on the data the biochemical role and nutritional quality of red and white meat are discussed. The results show that red meat is adapted for slow and continuous activity and white meat for quick but occasional activity. In spite of comparatively low lysine content the red meat is adjudged more nutritious than white meat.

Nutritional evaluation of an indigenous low cost protein food

A study of supplementary feeding was conducted on children with a protein food (edible fish powder in the form of 'chutney') for 35 days and the effect assessed periodically. The most noticeable effect was gain in weight and mid arm circumference in children. 35% children showed a weight gain of 1 kg, 27% 0.5 kg, 21% 1.5 kg and 2.5% 2.5 kg. 48% children registered an increase in their mid-arm circumference by 0.5 cm, 16% 1 cm and 2.5% 1.5 cm. 10% children did not gain weight. However, these children had intercurrent infections like measles, whooping cough and asthma.