Estudo radiográfico da relação entre os principais métodos de avaliação da idade óssea e dentária com a idade cronológica quando aplicados à leucodermas e xantodermas brasileiros

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação de diferentes métodos para sobreposições cefalométricas na maxila e mandíbula em telerradiografias em norma de 45 graus. Estudo com implantes metálicos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

MÉTODOS DA ELETRORESISTIVIDADE E DA POLARIZAÇÃO INDUZIDA APLICADOS NO ESTUDO DO ATERRO

Investigações geofísicas, pelos métodos geoelétricos de eletrorresistividade e polarização induzida (IP), através das técnicas de sondagem elétrica vertical e caminhamento elétrico (configurações Schlumberger e dipolo-dipolo), foram executadas na área do aterro controlado da cidade de Piracicaba (SP), com o objetivo de avaliar as potencialidades da integração dos métodos na caracterização geoelétrica da área. A área sobre a qual está assentado o aterro de Piracicaba é constituída por sedimentos da Formação Corumbataí (sedimentos argilosos e/ou silto-argilosos, com intercalações de arenitos). A interpretação conjunta da resistividade e da polarizabilidade permitiu mapear zonas de percolação de chorume e identificar os diferentes litotipos das formação, identificando materiais arenosos e siltosos. Ficou evidente que a polarizabilidade é sensível à presença de resíduos urbanos e que o efeito de IP é relacionado a materiais polarizáveis dispostos na cava, como latas, papéis, restos eletrônicos e materiais de empréstimo utilizados para a cobertura dos resíduos. Além disso, o método de IP pode ser mais indicado para o mapeamento de zonas de resíduos onde não exista contraste de resistividade entre o meio natural e os resíduos. Palavras-chave: Eletrorresisitividade, polarização induzida, aterro sanitário.

Estudo do perfil epidemiológico do melanoma cutâneo na cidade de Jaú-SP através do registro de base populacional

Pós-graduação em Pesquisa e Desenvolvimento (Biotecnologia Médica) - FMB

Métodos geoelétricos aplicados no estudo de uma ocorrência de manganês no município de Careaçu - MG

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Gestão do conhecimento na educação ambiental: estudo de casos em programas de educação ambiental em universidades brasileiras

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Gestão de portfólio de produtos em empresas de base tecnológica: um estudo multicasos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estudo de tempos e métodos em uma microempresa prestadora de serviços de usinagem mecânica

This paper aims to survey data to analyze the productive capacity of a machining process of rolling bearings by methods-time measurement, in order to identify its bottlenecks and propose improvements in the system. The production times at the company are not known, the method of separation of operations and identification of its activities and the timing of production times and setup become points of departure for this paper. The results from this method of analysis provide clarity in identifying system weaknesses and by them it was possible to carry out the proposals for improvement in some process steps. The implementation of the improvements was not performed, but with the goals of this work was made possible to raise relevant information of the analyzed system

Métodos de estudo da transmissão neuromuscular

Este trabalho tem como objetivo documentar as atividades realizadas no Estágio Curricular Obrigatório do curso de Graduação em Física Médica, realizado no Laboratório de Farmacologia da Junção Neuromuscular do Departamento de Farmacologia do Instituto de Biociências da UNESP de Botucatu. O estágio englobou atividades relacionadas à Instrumentação e à Iniciação Científica, ambas visando ao estudo da Farmacologia da Transmissão Neuromuscular. Desta forma, neste relatório serão apresentados, inicialmente, uma breve revisão dos aspectos fundamentais da morfologia e da fisiologia da junção neuromuscular. Posteriormente, serão descritos os métodos de estudo da transmissão neuromuscular aprendidos no decorrer do estágio, especificamente, as técnicas miográfica, que permite o registro da contração muscular, e eletrofisiológica, que possibilita o registro de atividade elétrica celular, ambas in vitro. Finalizando, serão apresentados os resultados do Projeto de Iniciação Científica desenvolvido, cujo objetivo foi estudar a ação do extrato etanólico da planta Tabernaemontana catharinensis sobre o bloqueio neuromuscular induzido por toxinas ofídicas na preparação do nervo frênico-músculo diafragma isolado de camundongos

Estudo do comportamento em fadiga de uma chapa de aço microligado, grau API 5L X70

In engineering, for correct designing the structural components required for cyclical stresses, it is necessary to determine a limit of resistance to fatigue, which is the maximum amplitude of the applied tension under which the fatigue failure does not occurs after a certain number cycles. The marine environment is hostile, not only by the high pressure, corrosion, but also by low temperatures. Petrol Production units, composed of the risers (pipelines connecting the oil well to the ship), are dimensioned to remain installed for periods of 20 up to 30 years, and must therefore be prepared to support various efforts, such as tidal, wind currents and everything that is related. This paper focuses on a study on the fatigue behavior of microalloyed steel, API 5L Grade X70, used to transport oil and gas by pipelines. For analysis, we obtained the curves S-N (stress vs. number of cycles) using laboratory data collected from cylindrical longitudinal and transverse specimens used in axial fatigue test in accordance with ASTM E466. The tensile tests and microhardness were performed to characterize the mechanical properties of the samples, and it was found that the values meet the specifications of the standard API 5L. To characterize microstructurally the material, it was also made a metallographic analysis of the steel under study, and the origin of the fatigue crack was investigated with the support of a scanning electron microscope (SEM).

Estudo de métodos para anotação linguística e extração de conceitos na aquisição de ontologias a partir de textos

Não disponível

Estudo da propagação de trinca por fadiga sob carregamento de amplitude variável

For engineering projects that require high reliability levels, is often not enough know only physical and chemical material properties. It’s necessary understand the failure mode of these materials in operation to ensure security level in the project and establish more stringent criteria in the analysis of structural integrity. Due to this need, aircraft industry has been using aluminum alloys in their designs and projects. “Currently more than 70% of aircraft structures are built of high strength aluminum alloys among which stand out 7075-T6 and 2024-T3 alloys, which are considered basics for being used in the new alloys development.” (PASTOUKHOV & VOORWALD, 1995). Some years ago ALCOA develops Al 2524 alloy that has emerged as refinement of Al 2024 (Al, Cu. Mg) alloy, with purpose of improve fracture toughness and fatigue resistance on structural components. The present research addresses testing of fatigue crack propagation under variable amplitude loading for Al 2024 alloy, observing the interaction effects from application of overhead blocks and plastic zone at the crack tip and makes an analysis of fracture surface images

Um estudo sobre a preparação metalográfica da liga de aluminio AA7075-T6

The increasing technological innovation and demand for materials with better properties boosts research into new materials and new alloys. To do so, aluminum alloys are being developed, among them the AA7075-T6, having many applications in aerospace and military industries, machinery and equipment, molds for plastic injection and structures. To study and understand the properties, characteristics and especially the microstructure of the material, the metallographic preparation is essential. This paper presents new methodologies to achieve the metallography of samples of scrap alloy AA7075-T6, with emphasis on methods of polishing. For the five samples, the best results were those with specific grinding, the samples only going down on the sander. For polishing, the most effective method so far has been using the polishing cloth 16.3, of ATM enterprise, solution of diamond 3 μm, solution of diamond 1 μm, and colloidal solution of OP-S. For the etching, the reactive agent used was phosphoric acid (H3PO4) 85% P.A., as 90% in the proportion of distilled water to 10% acid. The best results were obtained in the attacks of 300 and 240 seconds, revealing the grain boundaries in most areas. Methodologies need more studies and more tests, but the results have proved to be satisfactory

Um estudo de novos paradigmas na realização de projetos de instalação elétrica residencial (automação)

Through awareness of new trends of consumption of the population with regard to housing, comfort, entertainment, security and sustainability, it was crafted a work that set out to study and develop the concept of home automation and how it will revolutionize the electrical installation projects and energy savings. A pre-wiring project, taking into account, basically, the installed load, is presented as a basis for comparison. The protocols for communication between intelligent devices in an automation environment, used in the work, are the X-10, LonWorks and UPnP. The home network is studied and divided into subsystems, for a better understanding, which are the lighting, audio, video and multimedia system, security, air conditioning and central vacuum system, and the idea of integrated design and system integrator is introduced, showing the change necessity in the design philosophy of electrical installations. The main means of energy savings in an automated home, such as dimerization, master off and smart meters are presented and, finally, it was concluded that there is a need to structure electrical installation projects more comprehensive with regard to home automation, in order to become more efficient and useful to users

Estudo da anatomia interna dos incisivos laterais superiores pelos métodos radiográficos digital e convencional

The maxillary lateral incisor has a very peculiar and internal morphology that can be influenced by the its external anatomy such as supernumerary roots and ruts deep root, which often hinders an effective endodontic treatment. Generally, this tooth have a single root with one root canal, but teeth with two to four channels can be found. The main canal can present ramifications such as accessory canals, laterals, collaterals, recorrents and apical deltas. All this factors interfere directally on endodonthics treatment. The objective of this work is a study of the internal anatomy of the maxillary lateral incisors by digital and conventional radiographics methods, comparing the results obteined by each method Six hundred upper lateral incisor were used in this study teeth of the collection of the Department of Anatomy ICT – UNESP. All the teeth were radiographed by vestibular face, using a digital radiographic unit(Dabi Atlante). After this step, all the teeth underwent by conventional radiographic technique(Kodak 2200) so that the results obtained were compared. To classify the channel system, it was adopted the classification of Pucci and Reig. All data obtained by digital technique were compared with those obtained in the conventional technique and were subjected to statistical analysis