Cartografía de QTL asociados a la tolerancia a estrés hídrico en frijol común (Phaseolus vulgaris L.)

Phaseolus vulgaris L. (frijol común o judía) es una leguminosa de gran demanda para la nutrición humana y un producto agrícola muy importante. Sin embargo, la producción de frijol se ve limitada por presiones ambientales como la sequía. En México, el 85% de la cosecha de frijol se produce en la temporada de primavera-verano, principalmente en las regiones del altiplano semiárido con una precipitación anual entre 250 y 400 mm. A pesar del implemento de tecnología en el campo, los factores naturales impiden al agricultor llegar a los rendimientos deseados. El Instituto Nacional de Investigaciones Forestales, Agrícolas y Pecuarias (INIFAP), como instituto de investigación gubernamental en México, tiene como objetivo la mejora de cultivos estratégicos, uno de ellos, P. vulgaris. Los estudios en relación a la sequía se enfocan especialmente en la selección de genotipos tolerantes, los cuales son sometidos en condiciones de estrés y monitoreando parámetros como el rendimiento y peso de semilla, además de algunos indicadores tales como índice de cosecha. El resultado de estos trabajos ha sido la obtención de variedades con mayor tolerancia a la sequía, tales como Pinto Villa y Pinto Saltillo. En los últimos años se ha avanzado notablemente en el conocimiento de las bases moleculares en las respuestas de las plantas al estrés. De acuerdo a diversos estudios se ha demostrado que las plantas bajo estrés por sequía experimentan cambios en la expresión de genes involucrados en la señalización, regulación de la transcripción y la traducción, transporte de agua y la función directa en la protección celular. También se ha observado que el déficit de agua es causado por las temperaturas extremas y la alta concentración de sales, por lo que al nivel molecular, las respuestas al estrés tienen puntos de especificidad y puntos de entrecruzamiento. La sequía puede generar estreses secundarios, tales como el nutricional, oxidativo y osmótico. Sin embargo, es necesario identificar y caracterizar muchos de los componentes involucrados en las respuestas al déficit hídrico, la caracterización de estos genes permitirá tener una mejor comprensión de los mecanismos bioquímicos y fisiológicos involucrados en la tolerancia al estrés. Actualmente, con el apoyo de la biología molecular se han identificado algunos genes que otorgan ventajas para la adaptación a ambientes desfavorables. Por lo que el objetivo del presente trabajo es identificar marcadores genéticos asociados a rasgos fenotípicos con énfasis a la tolerancia a estrés hídrico en P. vulgaris. Una vez establecidos los marcadores asociados al estrés hídrico, es factible considerar su uso para la selección asistida por marcadores en líneas o variedades de frijol de interés para los mejoradores. Se evaluaron 282 familias F3:5 derivadas de la cruza entre los cultivares Pinto Villa y Pinto Saltillo. Las familias se sembraron bajo un diseño simple de látice 17x17, el experimento se llevo acabo en el ciclo primavera-verano del 2010 y 2011, y otoñoinvierno de 2010 en el Campo Experimental Bajío del INIFAP con dos repeticiones para cada tratamiento de humedad (riego completo y sequía terminal). En todos los genotipos se realizó el fenotipado (variables fenotípicas) y el genotipado a través de marcadores moleculares. Los análisis estadísticos se basaron en el análisis de componentes principales (Eigen Analysis Selection Index Method, ESIM), la asociación entre marcadores SNP y el fenotipado (paquete SNPassoc para R) y el análisis de varianza (ANOVA). Los valores ESIM mostraron que las variables de Rendimiento, Días a floración, Días a madurez fisiológica e Índice de cosecha fueron sobresalientes en sequía terminal, por lo que se sugieren tomarse en consideración para los estudios de sequía en P. vulgaris como monitores de evaluación a la resistencia. Se identificaron nueve familias sobresalieron por sus valores ESIM (PV/PS6, 22, 131, 137, 149, 154, 201, 236 y 273), además de presentar valores superiores para el rendimiento en comparación con los parentales. Estos genotipos son candidatos interesantes para realizar estudios de identificación de loci asociados con la respuesta al estrés, y como potenciales parentales en el desarrollo de nuevas variedades de frijol. En los análisis de asociación SNPassoc se identificaron 83 SNPs significativos (p<0,0003) asociados a los rasgos fenotípicos, obteniendo un total de 222 asociaciones, de las cuales predomina el modelo genético de codominancia para las variables Días a floración, Periodo reproductivo y Biomasa total. Treinta y siete SNPs se identificaron a diferentes funciones biológicas a través del análisis de anotación funcional, de los cuales 12 SNPs (9, 18, 28, 39, 61, 69, 80, 106, 115, 128, 136 y 142) sobresalen por su asociación al fenotipado, y cuya anotación funcional indica que se encuentran en genes relacionados a la tolerancia a la sequía, tales como la actividad kinasa, actividad metabólica del almidón, carbohidratos y prolina, respuesta al estrés oxidativo, así como en los genes LEA y posibles factores de transcripción. En el caso de los análisis ANOVA, se identificaron 72 asociaciones entre los SNPs y las variables fenotípicas (F< 3,94E-04). Las 72 asociaciones corresponden a 30 SNPs y 7 variables fenotípicas, de las que predomina Peso de 100 semillas y Periodo reproductivo. Para los rasgos de Rendimiento, Índice de cosecha y Días a madurez fisiológica se presentaron asociaciones con seis SNPs (17, 34, 37, 50, 93 y 107), de los cuales, a los SNP37 y SNP107 fueron identificados a la anotación biológica de protein binding. Por otro lado, los SNP106 y SNP128 asociados al Periodo reproductivo, son genes con actividad kinasa y actividad metabólica del almidón, respectivamente. Para los marcadores tipo AFLP, se identificaron 271 asociaciones (F<2,34E-04). Las asociaciones corresponden a 86 AFLPs con todas las variables fenotípicas evaluadas, de las que predomina peso de 100 semillas, Días a floración y Periodo reproductivo. Debido a que los en los AFLPs no es posible determinar su anotación biológica, se proponen como marcadores potenciales relacionados a la resistencia a la sequía en frijol. Los AFLPs candidatos requieren más estudios tales como la secuenciación de los alelos respectivos, así como la identificación de éstas secuencias en el genoma de referencia y su anotación biológica, entre otros análisis, de esta manera podríamos establecer aquellos marcadores candidatos a la validación para la selección asistida. El presente trabajo propone tanto genotipos como marcadores genéticos, que deben ser validados para ser utilizados en el programa de mejoramiento de P. vulgaris, con el objetivo de desarrollar nuevas líneas o variedades tolerantes a la sequía. ABSTRACT Phaseolus vulgaris L. (common bean or judia) is a legume of great demand for human consumption and an important agricultural product. However, the common bean production is limited by environmental stresses, such as drought. In Mexico, 85% of the common bean crop is produced in the spring-summer season mainly in semiarid highland regions with a rainfall between 250 and 400 mm per year. In spite of the improvement of crop technology, the natural factors hamper getting an optimal yield. The National Institute for Forestry, Agriculture and Livestock (INIFAP) is a government research institute from Mexico, whose main objective is the genetic breeding of strategic crops, like P. vulgaris L. The drought tolerance studies particularly focus on the selection of bean tolerant genotypes, which are subjected to stress conditions, by means of monitoring parameters such as yield and seed weight, plus some agronomic indicators such as harvest index. The results of these works have led to obtain cultivars with higher drought tolerance such as Pinto Villa and Pinto Saltillo. Significant achievements have been recently made in understanding the molecular basis of stress plant responses. Several studies have shown that plants under drought stress present changes in gene expression related to cell signalling, transcriptional and translational regulation, water transport and cell protection. In addition, it has been observed that the extreme temperatures and high salt concentrations can cause a water deficiency so, at the molecular level, stress responses have specific and crossover points. The drought can cause secondary stresses, such as nutritional, oxidative and osmotic stress. It is required the identification of more components involved in the response to water deficit, the characterization of these genes will allow a better understanding of the biochemical and physiological mechanisms involved in stress tolerance. Currently, with the support of molecular biology techniques, some genes that confer an advantage for the crop adaptation to unfavourable environments have been identified. The objective of this study is to identify genetic markers associated with phenotypic traits with emphasis on water stress tolerance in P. vulgaris. The establishment of molecular markers linked to drought tolerance would make possible their use for marker-assisted selection in bean breeding programs. Two hundred and eighty two F3:5 families derived from a cross between the drought resistant cultivars Pinto Villa and Pinto Saltillo were evaluated. The families were sowed under a 17x17 simple lattice design. The experiment was conducted between spring-summer seasons in 2010 and 2011, and autumn-winter seasons in 2010 at the Bajio Experimental Station of INIFAP with two treatments (full irrigation and terminal drought). All families were phenotyped and genotyped using molecular markers. Statistical analysis was based on principal component analysis (Eigen Analysis Selection Index Method, ESIM), association analysis between SNP markers and phenotype (SNPassoc package R) and analysis of variance (ANOVA). The ESIM values showed that seed yield, days to flowering, days to physiological maturity and harvest index were outstanding traits in terminal drought treatment, so they could be considered as suitable parameters for drought-tolerance evaluation in P. vulgaris. Nine outstanding families for the ESIM values were identified (PV/PS6, 22, 131, 137, 149, 154, 201, 236 and 273), in addition, these families showed higher values for seed yield compared to the parental cultivars. These families are promising candidates for studies focused on the identification of loci associated to the stress response, and as potential parental cultivars for the development of new varieties of common bean. In the SNPassoc analysis, 83 SNPs were found significantly associated (p<0.0003) with phenotypic traits, obtaining a total of 222 associations, most of which involved the traits days to flowering, reproductive period and total biomass under a codominant genetic model. The functional annotation analysis showed 37 SNPs with different biological functions, 12 of them (9, 18, 28, 39, 61, 69, 80, 106, 115, 128, 136 and 142) stand out by their association to phenotype. The functional annotation suggested a connection with genes related to drought tolerance, such as kinase activity, starch, carbohydrates and proline metabolic processes, responses to oxidative stress, as well as LEA genes and putative transcription factors. In the ANOVA analysis, 72 associations between SNPs and phenotypic traits (F<3.94E- 04) were identified. All of these associations corresponded to 30 SNPs markers and seven phenotypic traits. Weight of 100 seeds and reproductive period were the traits with more associations. Seed yield, harvest index and days to physiological maturity were associated to six SNPs (17, 34, 37, 50, 93 and 107), the SNP37 and SNP107 were identified as located in protein binding genes. The SNP106 and SNP128 were associated with the reproductive period and belonged to genes with kinase activity and genes related to starch metabolic process, respectively. In the case of AFLP markers, 271 associations (F<2.34E-04) were identified. The associations involved 86 AFLPs and all phenotypic traits, being the most frequently associated weight of 100 seeds, days to flowering and reproductive period. Even though it is not possible to perform a functional annotation for AFLP markers, they are proposed as potential markers related to drought resistance in common bean. AFLPs candidates require additional studies such as the sequencing of the respective alleles, identification of these sequences in the reference genome and gene annotation, before their use in marker assisted selection. This work, although requires further validation, proposes both genotypes and genetic markers that could be used in breeding programs of P. vulgaris in order to develop new lines or cultivars with enhanced drought-tolerance.

Rehabilitación terminal TWA, JFK: Saarinen

Rehabilitación terminal TWA, JFK: Saarinen

Estimación del consumo de potencia en un terminal portátil multimedia basada en la PMU del procesador

Este proyecto se incluye en una línea de trabajo que tiene como objetivo final la optimización de la energía consumida por un dispositivo portátil multimedia mediante la aplicación de técnicas de control realimentado, a partir de una modificación dinámica de la frecuencia de trabajo del procesador y de su tensión de alimentación. La modificación de frecuencia y tensión se realiza a partir de la información de realimentación acerca de la potencia consumida por el dispositivo, lo que supone un problema ya que no suele ser posible la monitorización del consumo de potencia en dispositivos de estas características. Este es el motivo por el que se recurre a la estimación del consumo de potencia, utilizando para ello un modelo de predicción. A partir del número de veces que se producen ciertos eventos en el procesador del dispositivo, el modelo de predicción es capaz de obtener una estimación de la potencia consumida por dicho dispositivo. El trabajo llevado a cabo en este proyecto se centra en la implementación de un modelo de estimación de potencia en el kernel de Linux. La razón por la que la estimación se implementa en el sistema operativo es, en primer lugar para lograr un acceso directo a los contadores del procesador. En segundo lugar, para facilitar la modificación de frecuencia y tensión, una vez obtenida la estimación de potencia, ya que esta también se realiza desde el sistema operativo. Otro motivo para implementar la estimación en el sistema operativo, es que la estimación debe ser independiente de las aplicaciones de usuario. Además, el proceso de estimación se realiza de forma periódica, lo que sería difícil de lograr si no se trabajase desde el sistema operativo. Es imprescindible que la estimación se haga de forma periódica ya que al ser dinámica la modificación de frecuencia y tensión que se pretende implementar, se necesita conocer el consumo de potencia del dispositivo en todo momento. Cabe destacar también, que los algoritmos de control se tienen que diseñar sobre un patrón periódico de actuación. El modelo de estimación de potencia funciona de manera específica para el perfil de consumo generado por una única aplicación determinada, que en este caso es un decodificador de vídeo. Sin embargo, es necesario que funcione de la forma más precisa posible para cada una de las frecuencias de trabajo del procesador, y para el mayor número posible de secuencias de vídeo. Esto es debido a que las sucesivas estimaciones de potencia se pretenden utilizar para llevar a cabo la modificación dinámica de frecuencia, por lo que el modelo debe ser capaz de continuar realizando las estimaciones independientemente de la frecuencia con la que esté trabajando el dispositivo. Para valorar la precisión del modelo de estimación se toman medidas de la potencia consumida por el dispositivo a las distintas frecuencias de trabajo durante la ejecución del decodificador de vídeo. Estas medidas se comparan con las estimaciones de potencia obtenidas durante esas mismas ejecuciones, obteniendo de esta forma el error de predicción cometido por el modelo y realizando las modificaciones y ajustes oportunos en el mismo. ABSTRACT. This project is included in a work line which tries to optimize consumption of handheld multimedia devices by the application of feedback control techniques, from a dynamic modification of the processor work frequency and its voltage. The frequency and voltage modification is performed depending on the feedback information about the device power consumption. This is a problem because normally it is not possible to monitor the power consumption on this kind of devices. This is the reason why a power consumption estimation is used instead, which is obtained from a prediction model. Using the number of times some events occur on the device processor, the prediction model is able to obtain a power consumption estimation of this device. The work done in this project focuses on the implementation of a power estimation model in the Linux kernel. The main reason to implement the estimation in the operating system is to achieve a direct access to the processor counters. The second reason is to facilitate the frequency and voltage modification, because this modification is also done from the operating system. Another reason to implement the estimation in the operating system is because the estimation must be done apart of the user applications. Moreover, the estimation process is done periodically, what is difficult to obtain outside the operating system. It is necessary to make the estimation in a periodic way because the frequency and voltage modification is going to be dynamic, so it needs to know the device power consumption at every time. Also, it is important to say that the control algorithms have to be designed over a periodic pattern of action. The power estimation model works specifically for the consumption profile generated by a single application, which in this case is a video decoder. Nevertheless, it is necessary that the model works as accurate as possible for each frequency available on the processor, and for the greatest number of video sequences. This is because the power estimations are going to be used to modify dynamically the frequency, so the model must be able to work independently of the device frequency. To value the estimation model precision, some measurements of the device power consumption are taken at different frequencies during the video decoder execution. These measurements are compared with the power estimations obtained during that execution, getting the prediction error committed by the model, and if it is necessary, making modifications and settings on this model.

Three-terminal heterojunction bipolar transistor solar cell for high-efficiency photovoltaic conversion

Here we propose, for the first time, a solar cell characterized by a semiconductor transistor structure (n/p/n or p/n/p) where the base-emitter junction is made of a high-bandgap semiconductor and the collector is made of a low-bandgap semiconductor. We calculate its detailed-balance efficiency limit and prove that it is the same one than that of a double-junction solar cell. The practical importance of this result relies on the simplicity of the structure that reduces the number of layers that are required to match the limiting efficiency of dual-junction solar cells without using tunnel junctions. The device naturally emerges as a three-terminal solar cell and can also be used as building block of multijunction solar cells with an increased number of junctions.

NADH-quinone oxidoreductase: PSST subunit couples electron transfer from iron–sulfur cluster N2 to quinone

The proton-translocating NADH-quinone oxidoreductase (EC 1.6.99.3) is the largest and least understood enzyme complex of the respiratory chain. The mammalian mitochondrial enzyme (also called complex I) contains more than 40 subunits, whereas its structurally simpler bacterial counterpart (NDH-1) in Paracoccus denitrificans and Thermus thermophilus HB-8 consists of 14 subunits. A major unsolved question is the location and mechanism of the terminal electron transfer step from iron–sulfur cluster N2 to quinone. Potent inhibitors acting at this key region are candidate photoaffinity probes to dissect NADH-quinone oxidoreductases. Complex I and NDH-1 are very sensitive to inhibition by a variety of structurally diverse toxicants, including rotenone, piericidin A, bullatacin, and pyridaben. We designed (trifluoromethyl)diazirinyl[3H]pyridaben ([3H]TDP) as our photoaffinity ligand because it combines outstanding inhibitor potency, a suitable photoreactive group, and tritium at high specific activity. Photoaffinity labeling of mitochondrial electron transport particles was specific and saturable. Isolation, protein sequencing, and immunoprecipitation identified the high-affinity specifically labeled 23-kDa subunit as PSST of complex I. Immunoprecipitation of labeled membranes of P. denitrificans and T. thermophilus established photoaffinity labeling of the equivalent bacterial NQO6. Competitive binding and enzyme inhibition studies showed that photoaffinity labeling of the specific high-affinity binding site of PSST is exceptionally sensitive to each of the high-potency inhibitors mentioned above. These findings establish that the homologous PSST of mitochondria and NQO6 of bacteria have a conserved inhibitor-binding site and that this subunit plays a key role in electron transfer by functionally coupling iron–sulfur cluster N2 to quinone.

A mutation in the transmembrane/luminal domain of the ryanodine receptor is associated with abnormal Ca2+ release channel function and severe central core disease

Central core disease is a rare, nonprogressive myopathy that is characterized by hypotonia and proximal muscle weakness. In a large Mexican kindred with an unusually severe and highly penetrant form of the disorder, DNA sequencing identified an I4898T mutation in the C-terminal transmembrane/luminal region of the RyR1 protein that constitutes the skeletal muscle ryanodine receptor. All previously reported RYR1 mutations are located either in the cytoplasmic N terminus or in a central cytoplasmic region of the 5,038-aa protein. The I4898T mutation was introduced into a rabbit RYR1 cDNA and expressed in HEK-293 cells. The response of the mutant RyR1 Ca2+ channel to the agonists halothane and caffeine in a Ca2+ photometry assay was completely abolished. Coexpression of normal and mutant RYR1 cDNAs in a 1:1 ratio, however, produced RyR1 channels with normal halothane and caffeine sensitivities, but maximal levels of Ca2+ release were reduced by 67%. [3H]Ryanodine binding indicated that the heterozygous channel is activated by Ca2+ concentrations 4-fold lower than normal. Single-cell analysis of cotransfected cells showed a significantly increased resting cytoplasmic Ca2+ level and a significantly reduced luminal Ca2+ level. These data are indicative of a leaky channel, possibly caused by a reduction in the Ca2+ concentration required for channel activation. Comparison with two other coexpressed mutant/normal channels suggests that the I4898T mutation produces one of the most abnormal RyR1 channels yet investigated, and this level of abnormality is reflected in the severe and penetrant phenotype of affected central core disease individuals.

A dimeric crystal structure for the N-terminal two domains of intercellular adhesion molecule-1

The 3.0-Å structure of a 190-residue fragment of intercellular adhesion molecule-1 (ICAM-1, CD54) reveals two tandem Ig-superfamily (IgSF) domains. Each of two independent molecules dimerizes identically with a symmetry-related molecule over a hydrophobic interface on the BED sheet of domain 1, in agreement with dimerization of ICAM-1 on the cell surface. The residues that bind to the integrin LFA-1 are well oriented for bivalent binding in the dimer, with the critical Glu-34 residues pointing away from each other on the periphery. Residues that bind to rhinovirus are in the flexible BC and FG loops at the tip of domain 1, and these and the upper half of domain 1 are well exposed in the dimer for docking to virus. By contrast, a residue important for binding to Plasmodium falciparum-infected erythrocytes is in the dimer interface. The presence of A′ strands in both domains 1 and 2, conserved hydrogen bonds at domain junctions, and elaborate hydrogen bond networks around the key integrin binding residues in domain 1 make these domains suited to resist tensile forces during adhesive interactions. A subdivision of the intermediate (I) set of IgSF domains is proposed in which domain 1 of ICAM-1 and previously described I set domains belong to the I1 set and domain 2 of ICAM-1, ICAM-2, and vascular cell adhesion molecule-1 belong to the I2 set.

The structure of the two amino-terminal domains of human ICAM-1 suggests how it functions as a rhinovirus receptor and as an LFA-1 integrin ligand

The normal function of human intercellular adhesion molecule-1 (ICAM-1) is to provide adhesion between endothelial cells and leukocytes after injury or stress. ICAM-1 binds to leukocyte function-associated antigen (LFA-1) or macrophage-1 antigen (Mac-1). However, ICAM-1 is also used as a receptor by the major group of human rhinoviruses and is a catalyst for the subsequent viral uncoating during cell entry. The three-dimensional atomic structure of the two amino-terminal domains (D1 and D2) of ICAM-1 has been determined to 2.2-Å resolution and fitted into a cryoelectron microscopy reconstruction of a rhinovirus–ICAM-1 complex. Rhinovirus attachment is confined to the BC, CD, DE, and FG loops of the amino-terminal Ig-like domain (D1) at the end distal to the cellular membrane. The loops are considerably different in structure to those of human ICAM-2 or murine ICAM-1, which do not bind rhinoviruses. There are extensive charge interactions between ICAM-1 and human rhinoviruses, which are mostly conserved in both major and minor receptor groups of rhinoviruses. The interaction of ICAMs with LFA-1 is known to be mediated by a divalent cation bound to the insertion (I)-domain on the α chain of LFA-1 and the carboxyl group of a conserved glutamic acid residue on ICAMs. Domain D1 has been docked with the known structure of the I-domain. The resultant model is consistent with mutational data and provides a structural framework for the adhesion between these molecules.

The C-terminal SET domains of ALL-1 and TRITHORAX interact with the INI1 and SNR1 proteins, components of the SWI/SNF complex

The ALL-1 gene was discovered by virtue of its involvement in human acute leukemia. Its Drosophila homolog trithorax (trx) is a member of the trx-Polycomb gene family, which maintains correct spatial expression of the Antennapedia and bithorax complexes during embryogenesis. The C-terminal SET domain of ALL-1 and TRITHORAX (TRX) is a 150-aa motif, highly conserved during evolution. We performed yeast two hybrid screening of Drosophila cDNA library and detected interaction between a TRX polypeptide spanning SET and the SNR1 protein. SNR1 is a product of snr1, which is classified as a trx group gene. We found parallel interaction in yeast between the SET domain of ALL-1 and the human homolog of SNR1, INI1 (hSNF5). These results were confirmed by in vitro binding studies and by demonstrating coimmunoprecipitation of the proteins from cultured cells and/or transgenic flies. Epitope-tagged SNR1 was detected at discrete sites on larval salivary gland polytene chromosomes, and these sites colocalized with around one-half of TRX binding sites. Because SNR1 and INI1 are constituents of the SWI/SNF complex, which acts to remodel chromatin and consequently to activate transcription, the interactions we observed suggest a mechanism by which the SWI/SNF complex is recruited to ALL-1/trx targets through physical interactions between the C-terminal domains of ALL-1 and TRX and INI1/SNR1.

A synthetic all d-amino acid peptide corresponding to the N-terminal sequence of HIV-1 gp41 recognizes the wild-type fusion peptide in the membrane and inhibits HIV-1 envelope glycoprotein-mediated cell fusion

Recent studies demonstrated that a synthetic fusion peptide of HIV-1 self-associates in phospholipid membranes and inhibits HIV-1 envelope glycoprotein-mediated cell fusion, presumably by interacting with the N-terminal domain of gp41 and forming inactive heteroaggregates [Kliger, Y., Aharoni, A., Rapaport, D., Jones, P., Blumenthal, R. & Shai, Y. (1997) J. Biol. Chem. 272, 13496–13505]. Here, we show that a synthetic all d-amino acid peptide corresponding to the N-terminal sequence of HIV-1 gp41 (D-WT) of HIV-1 associates with its enantiomeric wild-type fusion (WT) peptide in the membrane and inhibits cell fusion mediated by the HIV-1 envelope glycoprotein. D-WT does not inhibit cell fusion mediated by the HIV-2 envelope glycoprotein. WT and D-WT are equally potent in inducing membrane fusion. D-WT peptide but not WT peptide is resistant to proteolytic digestion. Structural analysis showed that the CD spectra of D-WT in trifluoroethanol/water is a mirror image of that of WT, and attenuated total reflectance–fourier transform infrared spectroscopy revealed similar structures and orientation for the two enantiomers in the membrane. The results reveal that the chirality of the synthetic peptide corresponding to the HIV-1 gp41 N-terminal sequence does not play a role in liposome fusion and that the peptides’ chirality is not necessarily required for peptide–peptide interaction within the membrane environment. Furthermore, studies along these lines may provide criteria to design protease-resistant therapeutic agents against HIV and other viruses.

The N-terminal domain of PsaF: Precise recognition site for binding and fast electron transfer from cytochrome c6 and plastocyanin to photosystem I of Chlamydomonas reinhardtii

The PsaF-deficient mutant 3bF of Chlamydomonas reinhardtii was used to modify PsaF by nuclear transformation and site-directed mutagenesis. Four lysine residues in the N-terminal domain of PsaF, which have been postulated to form the positively charged face of a putative amphipathic α-helical structure were altered to K12P, K16Q, K23Q, and K30Q. The interactions between plastocyanin (pc) or cytochrome c6 (cyt c6) and photosystem I (PSI) isolated from wild type and the different mutants were analyzed using crosslinking techniques and flash absorption spectroscopy. The K23Q change drastically affected crosslinking of pc to PSI and electron transfer from pc and cyt c6 to PSI. The corresponding second order rate constants for binding of pc and cyt c6 were reduced by a factor of 13 and 7, respectively. Smaller effects were observed for mutations K16Q and K30Q, whereas in K12P the binding was not changed relative to wild type. None of the mutations affected the half-life of the microsecond electron transfer performed within the intermolecular complex between the donors and PSI. The fact that these single amino acid changes within the N-terminal domain of PsaF have different effects on the electron transfer rate constants and dissociation constants for both electron donors suggests the existence of a rather precise recognition site for pc and cyt c6 that leads to the stabilization of the final electron transfer complex through electrostatic interactions.

The lepidopteran transposon vector, piggyBac, mediates germ-line transformation in the Mediterranean fruit fly

The piggyBac (IFP2) short inverted terminal repeat transposable element from the cabbage looper Trichoplusia ni was tested for gene transfer vector function as part of a bipartite vector–helper system in the Mediterranean fruit fly Ceratitis capitata. A piggyBac vector marked with the medfly white gene was tested with a normally regulated piggyBac transposase helper at two different concentrations in a white eye host strain. Both experiments yielded transformants at an approximate frequency of 3–5%, with a total of six lines isolated having pigmented eyes with various levels of coloration. G1 transformant siblings from each line shared at least one common integration, with several sublines having an additional second integration. For the first transformant line isolated, two integrations were determined to be stable for 15 generations. For five of the lines, a piggyBac-mediated transposition was verified by sequencing the insertion site junctions isolated by inverse PCR that identified a characteristic piggyBac TTAA target site duplication. The efficient and stable transformation of the medfly with a lepidopteran vector represents transposon function over a relatively large evolutionary distance and suggests that the piggyBac system will be functional in a broad range of insects.

Cloning of inversion breakpoints in the Anopheles gambiae complex traces a transposable element at the inversion junction

Anopheles arabiensis, one of the two most potent malaria vectors of the gambiae complex, is characterized by the presence of chromosomal paracentric inversions. Elucidation of the nature and the dynamics of these inversions is of paramount importance for the understanding of the population genetics and evolutionary biology of this mosquito and of the impact on malaria epidemiology. We report here the cloning of the breakpoints of the naturally occurring polymorphic inversion 2Rd′ of A. arabiensis. A cDNA clone that cytologically mapped on the proximal breakpoint was the starting material for the isolation of a cosmid clone that spanned the breakpoint. Analysis of the surrounding sequences demonstrated that adjacent to the distal breakpoint lies a repetitive element that exhibits distinct distribution in different A. arabiensis strains. Sequencing analysis of that area revealed elements characteristic of transposable element terminal repeats. We called this presumed transposable element Odysseus. The presence of Odysseus at the junction of the naturally occuring inversion 2Rd′ suggests that the inversion may be the result of the transposable element’s activity. Characteristics of Odysseus’ terminal region as well as its cytological distribution in different strains may indicate a relatively recent activity of Odysseus.