Direct-search penalty/barrier methods

In Nonlinear Optimization Penalty and Barrier Methods are normally used to solve Constrained Problems. There are several Penalty/Barrier Methods and they are used in several areas from Engineering to Economy, through Biology, Chemistry, Physics among others. In these areas it often appears Optimization Problems in which the involved functions (objective and constraints) are non-smooth and/or their derivatives are not know. In this work some Penalty/Barrier functions are tested and compared, using in the internal process, Derivative-free, namely Direct Search, methods. This work is a part of a bigger project involving the development of an Application Programming Interface, that implements several Optimization Methods, to be used in applications that need to solve constrained and/or unconstrained Nonlinear Optimization Problems. Besides the use of it in applied mathematics research it is also to be used in engineering software packages.

Logic functions based on optical bias controlled SIC Tandem devices

The purpose of this paper is the design of an optoelectronic circuit based on a-SiC technology, able to act simultaneously as a 4-bit binary encoder or a binary decoder in a 4-to-16 line configurations and show multiplexer-based logical functions. The device consists of a p-i'(a-SiC:H)-n/p-i(a-Si:H)-n multilayered structure produced by PECVD. To analyze it under information-modulated wave (color channels) and uniform irradiation (background) four monochromatic pulsed lights (input channels): red, green, blue and violet shine on the device. Steady state optical bias was superimposed separately from the front and the back sides, and the generated photocurrent was measured. Results show that the devices, under appropriate optical bias, act as reconfigurable active filters that allow optical switching and optoelectronic logic functions development providing the possibility for selective removal of useless wavelengths. The logic functions needed to construct any other complex logic functions are the NOT, and both or either an AND or an OR. Any other complex logic function that might be found can also be used as building blocks to achieve the functions needed for the retrieval of channels within the WDM communication link. (C) 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim

Protocolo Mac para acesso multi-modo em redes de sensores sem fios móveis

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do grau de Mestre em Engenharia Electrotécnica e de Computadores

Multi-agent simulation of bilateral contracting in competitive electricity markets

Traditional vertically integrated power utilities around the world have evolved from monopoly structures to open markets that promote competition among suppliers and provide consumers with a choice of services. Market forces drive the price of electricity and reduce the net cost through increased competition. Electricity can be traded in both organized markets or using forward bilateral contracts. This article focuses on bilateral contracts and describes some important features of an agent-based system for bilateral trading in competitive markets. Special attention is devoted to the negotiation process, demand response in bilateral contracting, and risk management. The article also presents a case study on forward bilateral contracting: a retailer agent and a customer agent negotiate a 24h-rate tariff. © 2014 IEEE.

Taxonomy of broker's functions in virtual enterprises

Not just with the emergence but also with the growing of the electronic market, that is, the growth of online suppliers of services and products and Internet users (potential consumers), the necessary conditions to the affirmation of the agile/virtual enterprises (A/VE) as a present and future enterprise organizational model are created. In this context, it is our understanding that the broker may have an important role in its development, namely, if the broker performs functions for the A/VE with better efficacy and efficiency. In this article, we will present first a revision of the broker’s models in a structured form. We present a taxonomy of possible broker’s functions for the broker’s actuation near the A/VE and then the classification of the literature broker’s models. This classification will permit an analysis of a broker’s model and establish a mainframe for our broker’s model according to the BM_Virtual Enterprise Architecture Reference Model (BM_VEARM).

A genetic algorithm for the resource constrained multi-project scheduling problem

This paper presents a genetic algorithm for the resource constrained multi-project scheduling problem. The chromosome representation of the problem is based on random keys. The schedules are constructed using a heuristic that builds parameterized active schedules based on priorities, delay times, and release dates defined by the genetic algorithm. The approach is tested on a set of randomly generated problems. The computational results validate the effectiveness of the proposed algorithm.

Benchmark exact solutions for the static analysis of multi-layered piezoelectric composite using PVDF

The three-dimensional (3D) exact solutions developed in the early 1970s by Pagano for simply supported multilayered orthotropic composite plates and later in the 1990s extended to piezoelectric plates by Heyliger have been extremely useful in the assessment and development of advanced laminated plate theories and related finite element models. In fact, the well-known test cases provided by Pagano and by Heyliger in those earlier works are still used today as benchmark solutions. However, the limited number of test cases whose 3D exact solutions have been published has somewhat restricted the assessment of recent advanced models to the same few test cases. This work aims to provide additional test cases to serve as benchmark exact solutions for the static analysis of multilayered piezoelectric composite plates. The method introduced by Heyliger to derive the 3D exact solutions has been successfully implemented using symbolic computing and a number of new test cases are here presented thoroughly. Specifically, two multilayered plates using PVDF piezoelectric material are selected as test cases under two different loading conditions and considering three plate aspect ratios for thick, moderately thick and thin plate, in a total of 12 distinct test cases. (C) 2013 Elsevier Ltd. All rights reserved.

Design of a laminated composite multi-cel structure subjected to torsion

Laminate composite multi-cell structures have to support both axial and shear stresses when sustaining variable twist. Thus the properties and design of the laminate may not be the most adequate at all cross-sections to support the torsion imposed on the cells. In this work, the effect of some material and geometric parameters on the optimal mechanical behaviour of a multi-cell composite laminate structure is studied when torsion is present. A particle swarm optimization technique is used to maximize the multi-cell structure torsion constant that can be used to obtain the angle of twist of the composite laminate profile.

Logarithmically proportional objective function for planar surfaces recognition in 3D point cloud

3D laser scanning is becoming a standard technology to generate building models of a facility's as-is condition. Since most constructions are constructed upon planar surfaces, recognition of them paves the way for automation of generating building models. This paper introduces a new logarithmically proportional objective function that can be used in both heuristic and metaheuristic (MH) algorithms to discover planar surfaces in a point cloud without exploiting any prior knowledge about those surfaces. It can also adopt itself to the structural density of a scanned construction. In this paper, a metaheuristic method, genetic algorithm (GA), is used to test this introduced objective function on a synthetic point cloud. The results obtained show the proposed method is capable to find all plane configurations of planar surfaces (with a wide variety of sizes) in the point cloud with a minor distance to the actual configurations. © 2014 IEEE.

Factors associated with the nutritional status of children less than 5 years of age

OBJECTIVE To analyze if the nutritional status of children aged less than five years is related to the biological conditions of their mothers, environmental and socioeconomic factors, and access to health services and social programs.METHODS This cross-sectional population-based study analyzed 664 mothers and 790 children using canonical correlation analysis. Dependent variables were characteristics of the children (weight/age, height/age, BMI/age, hemoglobin, and retinol serum levels). Independent variables were those related to the mothers’ nutritional status (BMI, hemoglobin, and retinol serum levels), age, environmental and socioeconomic factors and access to health service and social programs. A < 0.05 significance level was adopted to select the interpreted canonical functions (CF) and ± 0.40 as canonical load value of the analyzed variables.RESULTS Three canonical functions were selected, concentrating 89.9% of the variability of the relationship among the groups. In the first canonical function, weight/age (-0.73) and height/age (-0.99) of the children were directly related to the mother’s height (-0.82), prenatal appointments (-0.43), geographical area of the residence (-0.41), and household incomeper capita (-0.42). Inverse relationship between the variables related to the children and people/room (0.44) showed that the larger the number of people/room, the poorer their nutritional status. Rural residents were found to have the worse nutritional conditions. In the second canonical function, the BMI of the mother (-0.48) was related to BMI/age and retinol of the children, indicating that as women gained weight so did their children. Underweight women tended to have children with vitamin A deficiency. In the third canonical function, hemoglobin (-0.72) and retinol serum levels (-0.40) of the children were directly related to the mother’s hemoglobin levels (-0.43).CONCLUSIONS Mothers and children were associated concerning anemia, vitamin A deficiency and anthropometric markers. Living in rural areas is a determining factor for the families health status.

Educational inequality in the occurrence of abdominal obesity:Pró-Saúde Study

OBJECTIVE To estimate the degree of educational inequality in the occurrence of abdominal obesity in a population of non-faculty civil servants at university campi.METHODS In this cross-sectional study, we used data from 3,117 subjects of both genders aged 24 to 65-years old, regarding the baseline ofPró-Saúde Study, 1999-2001. Abdominal obesity was defined according to abdominal circumference thresholds of 88 cm for women and 102 cm for men. A multi-dimensional, self-administered questionnaire was used to evaluate education levels and demographic variables. Slope and relative indices of inequality, and Chi-squared test for linear trend were used in the data analysis. All analyses were stratified by genders, and the indices of inequality were standardized by age.RESULTS Abdominal obesity was the most prevalent among women (43.5%; 95%CI 41.2;45.9), as compared to men (24.3%; 95%CI 22.1;26.7), in all educational strata and age ranges. The association between education levels and abdominal obesity was an inverse one among women (p < 0.001); it was not statistically significant among men (p = 0.436). The educational inequality regarding abdominal obesity in the female population, in absolute terms (slope index of inequality), was 24.0% (95%CI 15.5;32.6). In relative terms (relative index of inequality), it was 2.8 (95%CI 1.9;4.1), after the age adjustment.CONCLUSIONS Gender inequality in the prevalence of abdominal obesity increases with older age and lower education. The slope and relative indices of inequality summarize the strictly monotonous trend between education levels and abdominal obesity, and it described educational inequality regarding abdominal obesity among women. Such indices provide relevant quantitative estimates for monitoring abdominal obesity and dealing with health inequalities.

Constraining multi-Higgs flavour models

To study a flavour model with a non-minimal Higgs sector one must first define the symmetries of the fields; then identify what types of vacua exist and how they may break the symmetries; and finally determine whether the remnant symmetries are compatible with the experimental data. Here we address all these issues in the context of flavour models with any number of Higgs doublets. We stress the importance of analysing the Higgs vacuum expectation values that are pseudo-invariant under the generators of all subgroups. It is shown that the only way of obtaining a physical CKM mixing matrix and, simultaneously, non-degenerate and non-zero quark masses is requiring the vacuum expectation values of the Higgs fields to break completely the full flavour group, except possibly for some symmetry belonging to baryon number. The application of this technique to some illustrative examples, such as the flavour groups Delta (27), A(4) and S-3, is also presented.