Phage display as a tool for generation of bio-therapeutic agents for breast cancer

Notch is a conserved signalling pathway, which plays a crucial role in a multiple cellular processes such as stem cell self-renewal, cell division, proliferation and apoptosis. In mammalian, four Notch receptors and five ligands are described, where interaction is achieved through their extracellular domains, leading to a transcription activation of different target genes. Increased expression of Notch ligands has been detected in several types of cancer, including breast cancer suggesting that these proteins represent possible therapeutic targets. The goal of this work was to generate quality protein targets and, by phage display technology, select function-blocking antibodies specific for Notch ligands. Phage display is a powerful technique that allows the generation of highly specific antibodies to be used for therapeutics, and it has also proved to be a reliable approach in identifying and validating new cancer-related targets. Also, we aimed at solving the tri-dimensional structure of the Notch ligands alone and in complex with selected antibodies. In this work, the initial phase focused on the optimization of the expression and purification of a human Delta-like 1 ligand mutant construct (hDLL1-DE3), by refolding from E. coli inclusion bodies. To confirm the biological activity of the produced recombinant protein cellular functional studies were performed, revealing that treatment with hDLL1-DE3 protein led to a modulation of Notch target genes. In a second stage of this study, Antibody fragments (Fabs) specific for hDLL1-DE3 were generated by phage display, using the produced protein as target, in which one good Fab candidate was selected to determine the best expression conditions. In parallel, multiple crystallization conditions were tested with hDLL1-DE3, but so far none led to positive results.

Bio-valorization of crude glycerol through polyhydroxyalkanoates production

Due to the prospective partial replacement of fossil fuels by biodiesel, its production has continuously grown in the last decade. The increase in global biodiesel production demands the development of sustainable applications of its main by-product, crude glycerol. In this thesis the feasibility of producing polyhydroxyalkanoates (PHA) by a mixed microbial community using crude glycerol as feedstock was investigated. Several incubation conditions were studied in order to maximize PHA production. The microbial population selected under aerobic dynamic feeding conditions had the ability to consume both major carbon fractions present in the crude, glycerol and methanol. Two biopolymers were stored, poly-3-hydroxybutyrate (PHB) and glucose biopolymer (GB), apparently using glycerol as the only carbon source for their production. The microbial enrichment obtained was able to accumulate up to 47% PHB of cell dry weight with a productivity of 0.24 g HA/L d. The overall PHA yield on total substrate consumed (0.32 g COD HB/g COD crude glycerol) was in the middle range of those reported in literature (0.08–0.58 g COD PHA/g COD real waste). The increase of temperature from 23ºC to 30ºC favored the culture fraction that accumulates glucose biopolymer with a maximum accumulation value of 25% of cell dry weight, which is an interesting value but not the main goal of this thesis. The fact that crude glycerol can be used to produce PHA without any pre-treatment step, makes the overall production process economically more competitive, reducing polymer final cost. This was the first study that demonstrates the valorization of the glycerol fraction present in the crude glycerol into PHA using an aerobic mixed microbial consortium.

Study of AC losses in medium-sized high temperature superconducting coils

The study of AC losses in superconducting pancake coils is of utmost importance for the development of superconducting devices. Due to different technical difficulties this study is usually performed considering one of two approaches: considering superconducting coils of few turns and studying AC losses in a large frequency range vs. superconducting coils with a large number of turns but measuring AC losses only in low frequencies. In this work, a study of AC losses in 128 turn superconducting coils is performed, considering frequencies ranging from 50 Hz till 1152 Hz and currents ranging from zero till the critical current of the coils. Moreover, the study of AC losses considering two different simultaneous harmonic components is also performed and results are compared to the behaviour presented by the coils when operating in a single frequency regime. Different electrical methods are used to verify the total amount of AC losses in the coil and a simple calorimetric method is presented, in order to measure AC losses in a multi-harmonic context. Different analytical and numerical methods are implemented and/or used, to design the superconducting coils and to compute the total amount of AC losses in the superconducting system and a comparison is performed to verify the advantages and drawbacks of each method.

Segurança no nível físico em sistemas multi-antena com diretividade na informação

Os sistemas de comunicação sem fios são sistemas de difusão por natureza. Devido a essa sua natureza, um dos problemas inerentes à mesma deve-se à segurança e ao secretismo, pois se o canal é partilhado a informação facilmente é obtida por um utilizador não autorizado, ao contrário dos sistemas de comunicação com fios. Tradicionalmente, a introdução de segurança em sistemas de comunicação, resulta na encriptação da informação, resultante de protocolos de encriptação. No entanto, a segurança através da criptografia baseia-se na premissa de que o utilizador não autorizado tem uma capacidade de processamento limitada, pois senão poderia simplesmente tentar todas as combinações possíveis e obter a chave de encriptação. Como a capacidade de processamento tem crescido exponencialmente, este tipo de sistemas tem se tornado cada vez mais complexos para não se tornarem obsoletos. A introdução de segurança na camada física torna-se então uma opção apelativa pois pode servir como um complemento, visto que os sistemas de criptografia funcionam em camadas superiores independentes da camada fisica, apresentando assim uma abordagem multi-camada em termos de segurança. Tipicamente as técnicas de segurança no nível físico podem se agrupar em 2 tipos: técnicas que se baseiam em códigos, ou técnicas que exploram variações temporais e espaciais do canal. As primeiras diminuem a eficiência espectral do sistema, e as segundas apresentam bons resultados em ambientes dinâmicos, mas em ambientes estáticos não são muito promissores. Há também a necessidade de aumentar as taxas de transmissão nos próximos sistemas de comunicação. Devido a estes requisitos, uma das tecnologias propostas para a nova geração de comunicações, é uma tecnologia baseada numa arquitectura Multiple-Input-Multiple-Output(MIMO). Esta tecnologia é promissora e consegue atingir taxas de transferências que correspondem aos requisitos propostos. Apresenta-se assim uma nova técnica de segurança no nível físico, que explora as caracteristicas físicas do sistema, como um complemento a outras medidas de segurança em camadas mais altas. Esta técnica não provoca diminuição da eficiência espectral e é independente do canal, o que tenta solucionar os problemas das restantes técnicas já existentes.

Machine diagnosis based on artificial immune systems

Nowadays, many of the manufactory and industrial system has a diagnosis system on top of it, responsible for ensuring the lifetime of the system itself. It achieves this by performing both diagnosis and error recovery procedures in real production time, on each of the individual parts of the system. There are many paradigms currently being used for diagnosis. However, they still fail to answer all the requirements imposed by the enterprises making it necessary for a different approach to take place. This happens mostly on the error recovery paradigms since the great diversity that is nowadays present in the industrial environment makes it highly unlikely for every single error to be fixed under a real time, no production stop, perspective. This work proposes a still relatively unknown paradigm to manufactory. The Artificial Immune Systems (AIS), which relies on bio-inspired algorithms, comes as a valid alternative to the ones currently being used. The proposed work is a multi-agent architecture that establishes the Artificial Immune Systems, based on bio-inspired algorithms. The main goal of this architecture is to solve for a resolution to the error currently detected by the system. The proposed architecture was tested using two different simulation environment, each meant to prove different points of views, using different tests. These tests will determine if, as the research suggests, this paradigm is a promising alternative for the industrial environment. It will also define what should be done to improve the current architecture and if it should be applied in a decentralised system.

Study of gold nanoparticle assisted neuron stimulation

The unique proprieties exhibited by nanoscale particles compared to their macro size counterparts allow for the creation of novel neural activity manipula-tion procedures. In this sense, gold nanoparticles (AuNPs) can be used to stimu-late the electrical activity of neuron by converting light into heat. During this dissertation, AuNPs are synthesized by the citrate reduction method, resulting in a hydrodynamic diameter of approximately 16 nm and an absorbance peak of 530 nm. A system to control a 532 nm laser and measure the temperature variation was custom built from scratch specifically for this project. Temperature is then measured with recourse to a thermocouple and through changes in impedance. The built system had in consideration the necessities pre-sented by in vivo tests. Trials were performed by measuring the temperature rise of colloidal AuNP solutions, having the temperature variation reached a maximum of ap-proximately 18 ºC relative to control trials; successfully showing that light is ef-fectively transduced into heat when AuNPs are present. This novel approach enables an alternative to optogenetics, which require the animal to be genetically modified in order to allow neuron stimulation.

Understanding multi-asset factor models: Factor exposure interpretation

Field lab: Business project

Temperature influence and social interaction on the frequency of electric organ discharges in Rhamphicthys rostratus.

The frequency of electric organ discharges (EOD) of a gymnotiform fish of "pulse" frequency (40-100 Hz) from South America - Ramphicthys rostratuswas studied. The animals were settled in pairs in a aquarium and thus observed: variation in EOD frequency had at least two components: one more positively correlated with temperature, another less positively correlated due to social interaction.

Design of bio-inspired ionic liquids for protein stabilisation

Ionic Liquids (ILs) consist in organic salts that are liquid at/or near room temperature. Since ILs are entirely composed of ions, the formation of ion pairs is expected to be one essential feature for describing solvation in ILs. In recent years, protein - ionic liquid (P-IL) interactions have been the subject of intensive studies mainly because of their capability to promote folding/unfolding of proteins. However, the ion pairs and their lifetimes in ILs in P-IL thematic is dismissed, since the action of ILs is therefore the result of a subtle equilibrium between anion-cation interaction, ion-solvent and ion-protein interaction. The work developed in this thesis innovates in this thematic, once the design of ILs for protein stabilisation was bio-inspired in the high concentration of organic charged metabolites found in cell milieu. Although this perception is overlooked, those combined concentrations have been estimated to be ~300 mM among the macromolecules at concentrations exceeding 300 g/L (macromolecular crowding) and transient ion-pair can naturally occur with a potential specific biological role. Hence the main objective of this work is to develop new bio-ILs with a detectable ion-pair and understand its effects on protein structure and stability, under crowding environment, using advanced NMR techniques and calorimetric techniques. The choline-glutamate ([Ch][Glu]) IL was synthesized and characterized. The ion-pair was detected in water solutions using mainly the selective NOE NMR technique. Through the same technique, it was possible to detect a similar ion-pair promotion under synthetic and natural crowding environments. Using NMR spectroscopy (protein diffusion, HSQC experiments, and hydrogen-deuterium exchange) and differential scanning calorimetry (DSC), the model protein GB1 (production and purification in isotopic enrichment media) it was studied in the presence of [Ch][Glu] under macromolecular crowding conditions (PEG, BSA, lysozyme). Under dilute condition, it is possible to assert that the [Ch][Glu] induces a preferential hydration by weak and non-specific interactions, which leads to a significant stabilisation. On the other hand, under crowding environment, the [Ch][Glu] ion pair is promoted, destabilising the protein by favourable weak hydrophobic interactions , which disrupt the hydration layer of the protein. However, this capability can mitigates the effect of protein crowders. Overall, this work explored the ion-pair existence and its consequences on proteins in conditions similar to cell milieu. In this way, the charged metabolites found in cell can be understood as key for protein stabilisation.

Frequency-domain receiver design for doubly-selective channels

This work is devoted to the broadband wireless transmission techniques, which are serious candidates to be implemented in future broadband wireless and cellular systems, aiming at providing high and reliable data transmission and concomitantly high mobility. In order to cope with doubly-selective channels, receiver structures based on OFDM and SC-FDE block transmission techniques, are proposed, which allow cost-effective implementations, using FFT-based signal processing. The first subject to be addressed is the impact of the number of multipath components, and the diversity order, on the asymptotic performance of OFDM and SC-FDE, in uncoded and for different channel coding schemes. The obtained results show that the number of relevant separable multipath components is a key element that influences the performance of OFDM and SC-FDE schemes. Then, the improved estimation and detection performance of OFDM-based broadcasting systems, is introduced employing SFN (Single Frequency Network) operation. An initial coarse channel is obtained with resort to low-power training sequences estimation, and an iterative receiver with joint detection and channel estimation is presented. The achieved results have shown very good performance, close to that with perfect channel estimation. The next topic is related to SFN systems, devoting special attention to time-distortion effects inherent to these networks. Typically, the SFN broadcast wireless systems employ OFDM schemes to cope with severely time-dispersive channels. However, frequency errors, due to CFO, compromises the orthogonality between subcarriers. As an alternative approach, the possibility of using SC-FDE schemes (characterized by reduced envelope fluctuations and higher robustness to carrier frequency errors) is evaluated, and a technique, employing joint CFO estimation and compensation over the severe time-distortion effects, is proposed. Finally, broadband mobile wireless systems, in which the relative motion between the transmitter and receiver induces Doppler shift which is different or each propagation path, is considered, depending on the angle of incidence of that path in relation to the direction of travel. This represents a severe impairment in wireless digital communications systems, since that multipath propagation combined with the Doppler effects, lead to drastic and unpredictable fluctuations of the envelope of the received signal, severely affecting the detection performance. The channel variations due this effect are very difficult to estimate and compensate. In this work we propose a set of SC-FDE iterative receivers implementing efficient estimation and tracking techniques. The performance results show that the proposed receivers have very good performance, even in the presence of significant Doppler spread between the different groups of multipath components.

Fatigue life assessment of endodontic instruments subjected to multi planar curvature

This present study aimed to investigate the fatigue life of unused (new) endodontic instruments made of NiTi with control memory by Coltene™ and subjected to the multi curvature of a mandibular first molar root canal. Additionally, the instrument‟s structural behaviour was analysed through non-linear finite element analysis (FEA). The fatigue life of twelve Hyflex™ CM files was assessed while were forced to adopt a stance with multiple radius of curvature, similar to the ones usually found in a mandibular first molar root canal; nine of them were subjected to Pecking motion, a relative movement of axial type. To achieve this, it was designed an experimental setup with the aim of timing the instruments until fracture while worked inside a stainless steel mandibular first molar model with relative axial motion to simulate the pecking motion. Additionally, the model‟s root canal multi-curvature was confirmed by radiography. The non-linear finite element analysis was conducted using the computer aided design software package SolidWorks™ Simulation, in order to define the imposed displacement required by the FEA, it was necessary to model an endodontic instrument with simplified geometry using SolidWorks™ and subsequently analyse the geometry of the root canal CAD model. The experimental results shown that the instruments subjected to pecking motion displayed higher fatigue life values and higher lengths of fractured tips than those with only rotational relative movement. The finite element non-linear analyses shown, for identical conditions, maximum values for the first principal stress lower than the yield strength of the material and those were located in similar positions to the instrument‟s fracture location determined by the experimental testing results.

Engineering bio-based polymers using alternative solvents and processes

The work presented in this thesis explores novel routes for the processing of bio-based polymers, developing a sustainable approach based on the use of alternative solvents such as supercritical carbon dioxide (scCO2), ionic liquids (ILs) and deep eutectic solvents (DES). The feasibility to produce polymeric foams via supercritical fluid (SCF) foaming, combined with these solvents was assessed, in order to replace conventional foaming techniques that use toxic and harmful solvents. A polymer processing methodology is presented, based on SCF foaming and using scCO2 as a foaming agent. The SCF foaming of different starch based polymeric blends was performed, namely starch/poly(lactic acid) (SPLA) and starch/poly(ε-caprolactone) (SPCL). The foaming process is based on the fact that CO2 molecules can dissolve in the polymer, changing their mechanical properties and after suitable depressurization, are able to create a foamed (porous) material. In these polymer blends, CO2 presents limited solubility and in order to enhance the foaming effect, two different imidazolium based ILs (IBILs) were combined with this process, by doping the blends with IL. The use of ILs proved useful and improved the foaming effect in these starch-based polymer blends. Infrared spectroscopy (FTIR-ATR) proved the existence of interactions between the polymer blend SPLA and ILs, which in turn diminish the forces that hold the polymeric structure. This is directly related with the ability of ILs to dissolve more CO2. This is also clear from the sorption experiments results, where the obtained apparent sorption coefficients in presence of IL are higher compared to the ones of the blend SPLA without IL. The doping of SPCL with ILs was also performed. The foaming of the blend was achieved and resulted in porous materials with conductivity values close to the ones of pure ILs. This can open doors to applications as self-supported conductive materials. A different type of solvents were also used in the previously presented processing method. If different applications of the bio-based polymers are envisaged, replacing ILs must be considered, especially due to the poor sustainability of some ILs and the fact that there is not a well-established toxicity profile. In this work natural DES – NADES – were the solvents of choice. They present some advantages relatively to ILs since they are easy to produce, cheaper, biodegradable and often biocompatible, mainly due to the fact that they are composed of primary metabolites such as sugars, carboxylic acids and amino-acids. NADES were prepared and their physicochemical properties were assessed, namely the thermal behavior, conductivity, density, viscosity and polarity. With this study, it became clear that these properties can vary with the composition of NADES, as well as with their initial water content. The use of NADES in the SCF foaming of SPCL, acting as foaming agent, was also performed and proved successful. The SPCL structure obtained after SCF foaming presented enhanced characteristics (such as porosity) when compared with the ones obtained using ILs as foaming enhancers. DES constituted by therapeutic compounds (THEDES) were also prepared. The combination of choline chloride-mandelic acid, and menthol-ibuprofen, resulted in THEDES with thermal behavior very distinct from the one of their components. The foaming of SPCL with THEDES was successful, and the impregnation of THEDES in SPCL matrices via SCF foaming was successful, and a controlled release system was obtained in the case of menthol-ibuprofen THEDES.

Predição precoce de risco de Pré-eclâmpsia na doença hipertensiva e diabetes na gravidez: Papel de fatores angiogénicos

RESUMO: A pré-eclâmpsia tem elevada morbi-mortalidade materna e perinatal. A sua etiologia multi-fatorial tem sido objeto de investigação, não sendo ainda totalmente conhecida. Não se conhece também a razão da diferente suscetibilidade individual e das diferentes expressões da doença. A hipertensão crónica e a diabetes são fatores de risco reconhecidos, e o adiamento da maternidade contribui para que estas duas patologias sejam atualmente mais prevalentes entre as mulheres grávidas. Uma vez que o seu quadro fisiopatológico precede em meses o quadro clínico, tem-se investigado a possibilidade de serem encontrados marcadores precoces e indicadores de risco. Em Portugal, os estudos relativos à hipertensão na gravidez são escassos, bem como a investigação sobre fatores de risco e marcadores para a mesma. No sentido de avaliar possíveis marcadores de risco para o desenvolvimento de préeclâmpsia ou complicações hipertensivas foi colhida, para esta dissertação, uma amostra de 1215 mulheres que frequentaram a consulta de Hipertensão ou de Diabetes na gravidez de um centro terciário, entre 2004 e 2013. Optou-se pela realização de três estudos independentes, abrangendo os dois primeiros um leque temporal de 9 e de 2 anos respetivamente. O primeiro, centrado na hipertensão, pesquisou, em 521 mulheres com hipertensão na presente ou em anterior gravidez, fatores de risco capazes de influenciar a progressão para pré-eclâmpsia. O segundo, direcionado para a diabetes gestacional, considerou uma amostra de 334 grávidas, parte das quais tinha também hipertensão crónica e procurou identificar fatores que contribuíram para o aparecimento de complicações hipertensivas. O terceiro estudo, realizado em 2012 e 2013, em três coortes de grávidas com hipertensão crónica, com diabetes gestacional, e sem estas patologias - procurou avaliar no 1º trimestre o comportamento de dois marcadores placentares obtidos no 1º trimestre - proteína plasmática A associada à gravidez (PAPP-A) e o fator de crescimento placentar (PlGF) - e o seu papel, quer como bio-marcadores isolados, quer em associação aos fatores de risco encontrados nos anteriores estudos, na construção de um modelo preditivo de préeclâmpsia. No primeiro estudo, a nuliparidade, a hipertensão gestacional, a fluxometria das artérias uterinas com IP superiores ao P95 entre as 20-22 semanas e a existência de restrição de crescimento fetal, foram os fatores que contribuíram para a construção de um modelo preditivo de pré-eclâmpsia. No segundo estudo, a coexistência de diabetes e hipertensão crónica agravou o prognóstico, associando-se as complicações hipertensivas à multiparidade, obesidade, idade materna e etnia negra. No terceiro estudo verificou-se uma redução da PlGf e da PAPP-A no 1º trimestre nas duas primeiras coortes, comparativamente à coorte sem patologia; na análise separada de cada coorte, quando se verificaram complicações hipertensivas ou pré-eclâmpsia, as concentrações de PlGf e PAPP-A também foram inferiores. Contudo, na elaboração de um modelo preditivo de pré-eclâmpsia, em conjunto com marcadores encontrados, apenas a PlGf pode ser integrada no modelo preditivo, o que se verificou na coorte com hipertensão crónica. Os marcadores bioquímicos em estudo tiveram valores inferiores nas coortes com patologia hipertensiva, demonstrando uma deficiente produção destas proteínas placentares nestas situações, podendo ser importante a sua pesquisa. Contudo, neste estudo, apenas na coorte de hipertensão crónica a PlGf teve participação como fator de risco, na construção de um modelo preditivo de pré-eclâmpsia.--------------------------------------------------------------------------------------------------ABSTRACT: Preeclampsia is associated with a great maternal and perinatal morbimortality. Its multifactorial etiology has been under investigation and is still insufficiently understood. The reason why there are differences in individual susceptibility and differences in expressions of the disease is still unknown. Chronic hypertension and diabetes are known risk factors for preeclampsia and maternity delay contributes to the great prevalence of these pathologies among pregnant women. As the physiopathological signs antedate by months the clinical course of the disease, early risk factors and biological markers are object of clinical research. In Portugal, scarce clinical studies were devoted to hypertension in pregnancy and to risk factors and markers of this pathology. This dissertation inquires 1215 pregnant women who were treated for hypertension or diabetes in a tertiary care center between 2004 and 2013, in order to find risk markers for hypertensive complications or preeclampsia. We conducted three independent studies for this purpose. In the first one we investigated which risk factors could influence the progression to preeclampsia in 521 pregnant women with present or past history of hypertension. The second one was conducted to find what factors were associated to hypertensive complications, with a sample of 334 pregnant women with gestational diabetes, some also with chronic hypertension, addressing the identification of the factors contributing to hypertensive complications. The third study was conducted between 2012 and 2013 with three cohorts of pregnant women, with chronic hypertension, gestational diabetes, and in the third one, pregnant women had a low risk pregnancy. The objective of the study was to evaluate the behavior of two placental markers – PAPP-A and PlGf – obtained in the first trimester, and the role of these markers as isolated biomarkers or in association with other risk factors, in order to define a predictive model of early preeclampsia. In the first study, nuliparity, gestational hypertension, uterine arteries doppler with PI above P95 between 20-22 weeks of gestation and the presence of fetal growth restriction were the markers involved in a predictive model for preeclampsia. In the second study the cohort with the coexistence of diabetes and hypertension had registered worse result and hypertensive complications were associated to multiparity, obesity, maternal age and black ethnicity. In the third study there was a reduction of the PlGf and a PAPP-A concentration for the first trimester in the two first cohorts comparatively to the low risk cohort; the separate analysis of each cohort showed that plGf and PAPP-A concentrations were reduced when hypertensive complications appeared. However, when trying to find a preeclampsia predictive model, only plGf gave significant results for being considered in the model and this was only possible in the chronic hypertension cohort. The biochemical markers investigated in this study were reduced in the cohorts when high blood pressure complications occurred, showing a defective production of these placenta proteins, and suggesting that they should be investigated as first trimester biomarkers. Nevertheless, for this research, in the cohort of chronic hypertension only PlGf had a significant result, when multivariate analysis of all the risk factors was considered for the construction of a preeclampsia predictive model.

Advancing tendon regeneration through the development of bio-stimulating tissue engineering approaches

Tendon tissue engineering (TE) requires tailoring scaffolds designs and properties to the anatomical and functional requirements of tendons located in different regions of the body. Cell sourcing is also of utmost importance as tendon cells are scarce. Recently, we have found that it is possible to direct the tenogenic differentiation of Amniotic fluid and Adipose tissue derived stem cells (hAFSCs and hASCs), and also that there are hASCs subpopulations that might be more prone to tenogenic differentiation. Nevertheless, biochemical stimulation may not be enough to develop functional TE substitutes for a tissue that is known to be highly dependent on mechanical loading.

A multi-criteria decision support system for a routing problem in waste collection

Autor proof