Antimicrobial susceptibility to b-lactams and metronidazole of microorganisms isolated from chronic and aggressive periodontitis

The objective of this study was to evaluate the microbial susceptibility to ß-lactams and metronidazole, and evaluate the production of ß-lactamases by microorganisms isolated from patients with chronic or aggressive periodontitis. The samples were obtained from 50 patients with periodontitis and microorganisms were isolated onto selective and nonselective culture media, identified by biochemical methods and tested for susceptibility to antimicrobial agents (amoxicillin, amoxicillin/clavulanate, cefoxitin, imipenem, metronidazole, penicillin G). The isolates were resistant to at least 1 mg/ml of any drug tested were evaluated to verify the production of ß-lactamases by the method of double layer (or biological) and chromogenic cephalosporin using nitrocefin. The results evidenced resistance to amoxicillin and penicillin G, while the susceptibility to association amoxicillin/clavulanate, imipenem and cefoxitin was widely disseminated among the organisms. Resistance to these drugs showed a clear correlation with the production of ß-lactamase in the majority of microbial groups.

The Economic Impacts of Tourism in Ouro Preto, MG, Brazil

The tourism spending like other activities has direct and secondary effects on the economy, and presents complex interaction with other activities deserving a special treatment for measuring its contribution to the global result of production and consumption. In this paper, it is used the Money Generation Model to measure the global economic impact of tourism sales in Ouro Preto, this method is not so limited by the data and it is able to produce good approximations to reality. It was not possible to adopt the WTO methodology due to data limitation. The results revealed the real importance of tourism for Ouro Preto, representing up to 10.4% of GDP in 2002, up to 21.8% of tax revenues in 2004, and approximately 11% of the region’s population in 2002 was related to tourism sales. Some actions can be outlined from these results in order to illustrate the current economic reality of the tourism in Ouro Preto. It is also possible to improve the tourist planning accomplished by the local City Hall in a coherent way with the economic results generated by the tourism.

Profile of the production engineer student at a school of engineering in Brazil: academic and professional trajectories and tendencies

The objective of this paper is to introduce a study on the academic trajectory and professional profile of production engineers who graduated in a traditional and renowned Brazilian University (School of Engineering at Bauru – FEB). The study was conducted with the first three classes of undergraduates in the production engineering program at FEB/UNESP. A 50% response rate was obtained and with the data collected it was possible to characterize the professional profile of the students and outline their academic trajectory. According to the sample, the main result is that the curricular grid is the main criterion of similarity in student education, thus, the focus on program improvements should focus on the curricular grid. Tendencies are also pointed out to guide the search for improvements in the academic trajectory of production engineering students.

Drivers of change in animal protein production systems: changes from 'traditional' to 'modern' beef cattle production systems in Brazil

Until 1990, beef cattle production in Brazil was recognized as an enterprise of low investment, low cost of production, as well as an extensive production system that used large land areas to be economically feasible. The situation changed for the Brazilian beef market when the economy stabilized in 1994 and all sectors involved in the beef supply chain were able to predict their associated costs and profits. During the same period, purchasing power of the Brazilian population grew, and as a consequence, consumers began to demand higher quality beef products. This new scenario in the late 1990s and early 2000s has led to more intensive beef production systems in Brazil as well as the need for a greater understanding of how technologies might be applied. As consequence of this evolution, in the last five years, a necessity to increase beef production has occurred. The quality of Brazilian beef has improved compared with beef produced 15 years ago, but continued improvements are needed to achieve excellence in terms of large-scale production of high quality beef, be sustainable over a long period of time, and increase our contribution to global food security.

Is production the core competence for the internationalization of emerging country firms?

The rise of new multinationals in countries like Brazil provides an opportunity to revisit and carefully construct theories of how firms internationalize, a topic on which extant theory is weak. Brazilian firms are "infant multinationals", unlike developed country firms that are "mature multinationals". They are also internationalizing in a very different global context, and can do so on the basis of different competitive advantages than multinationals that came before. Therefore, this study aims at creating subsidies for theory building about early-stage internationalization. Emerging country firms have Production competences as main competitive asset to internationalize, what reflects their competitive positioning in home markets and their entry strategy in international markets. In the case of early-entrants - Western multinationals in the 1950s and Japanese in the 1980s - the Production competence played a key role for successful internationalization. Thus, the focus of the study is the role that the Production competence plays in the internationalization of late-entrants, the emerging country multinationals. The research design considers not only the position of the headquarters but also the initiatives of the subsidiaries and the dynamic interplay between both. The paper allows a better understanding of internationalization processes and the role of Production, when firms start building their own international networks. It brings relevant insights about the paths that are being followed by emerging country multinationals, the difficulties they find, the solutions they develop. These are important inputs not only for new theory building but also for managerial practice. (C) 2012 Elsevier B.V. All rights reserved.

The Laboratory Efficacy of Cypermethrin Dust Against Lesser Mealworm Larvae and Adults, Alphitobius diaperinus (Panzer) (Coleoptera: Tenebrionidae)

Cypermethrin dust was evaluated as a tool for the integrated management of lesser mealwonns (also called the darkling beetle), Alphitobius diaperinus (Panzer). This experiment examined the efficacy of the cypermethrin against adult and late instar lesser mealwonns under laboratory conditions. Two bioassay methods were evaluated, using either a petri plate or a covered plastic container simulating poultry house conditions. In the simulated conditions, two different samples were used and cypermethrin was either dusted onto the surface of the container or was directly dusted onto the bottom. The LC50 for adults was 636.6 ppm, however, 929.7 ppm of cypermethrin dust was needed to achieve a 50% mortality rate in late instar larvae 24 h after the administration of the insecticide. A similar trend was observed in the simulated poultry houses when the adult mortality was > 90% while effectiveness in late in. star larvae was decreased, i.e., between 50 and 85%. Significant differences in the toxicity profiles were observed in larvae mortality when cypermethrin it was dusted directly onto the litter surface, compared to the bottom of the container. We have verified that cypermethrin dust is available for use in poultry houses however, toxicity profiles of lesser mealworm may depend on the beetle's stage of development and method of application

Comparative in vitro evaluation of forage legumes (prosopis, acacia, atriplex, and leucaena) on ruminal fermentation and methanogenesis

Two experiments in vitro were conducted to evaluate four Egyptian forage legume browses, i.e., leaves of prosopis (Prosopis juliflora), acacia (Acacia saligna), atriplex (A triplex halimus), and leucaena (Leucaena leucocephala), in comparison with Tifton (Cynodon sp.) grass hay for their gas production, methanogenic potential, and ruminal fermentation using a semi-automatic system for gas production (first experiment) and for ruminal and post ruminal protein degradability (second experiment). Acacia and leucaena showed pronounced methane inhibition compared with Tifton, while prosopis and leucaena decreased the acetate:propionate ratio (P<0.01). Acacia and leucaena presented a lower (P<0.01) ruminal NH3-N concentration associated with the decreasing (P<0.01) ruminal protein degradability. Leucaena, however, showed higher (P<0.01) intestinal protein digestibility than acacia. This study suggests that the potential methanogenic properties of leguminous browses may be related not only to tannin content, but also to other factors.

Methodological contributions towards the study of health care production: lessons from a research study on barriers and access in mental health

This article presents methodological contributions and a conceptual innovation for thinking about the production of health care, stemming from a study on access and barriers in mental health carried out in the municipality of Campinas (Sao Paulo, Brazil). The study used a cartographic approach and, after an initial identification of the most complex cases (on the part of the teams of workers), adopted the users as guides to explore the different levels of production of their lives and to evaluate the possibility of forming a network of existential connections that produce life as a fundamental analyzer of access or barriers to care.

Thermal design of a tray-type distillation column of an ammonia/water absorption refrigeration cycle

The goal of this paper is to present an analysis of a segmented weir sieve-tray distillation column for a 17.58 kW (5 TR) ammonia/water absorption refrigeration cycle. Balances of mass and energy were performed based on the method of Ponchon-Savarit, from which it was possible to determine the ideal number of trays. The analysis showed that four ideal trays were adequate for that small absorption refrigeration system having the feeding system to the column right above the second tray. It was carried out a sensitivity analysis of the main parameters. Vapor and liquid pressure drop constraint along with ammonia and water mass flow ratios defined the internal geometrical sizes of the column, such as the column diameter and height, as well as other designing parameters. Due to the lack of specific correlations, the present work was based on practical correlations used in the petrochemical and beverage production industries. The analysis also permitted to obtain the recommended values of tray spacing in order to have a compact column. The geometry of the tray turns out to be sensitive to the charge of vapor and, to a lesser extent, to the load of the liquid, being insensible to the diameter of tray holes. It was found a column efficiency of 50%. Finally, the paper presents some recommendations in order to have an optimal geometry for a compact size distillation column. (c) 2011 Elsevier Ltd. All rights reserved.

Modeling and simulation of severe slugging with mass transfer effects

A mathematical model and numerical simulations are presented to investigate the dynamics of gas, oil and water flow in a pipeline-riser system. The pipeline is modeled as a lumped parameter system and considers two switchable states: one in which the gas is able to penetrate into the riser and another in which there is a liquid accumulation front, preventing the gas from penetrating the riser. The riser model considers a distributed parameter system, in which movable nodes are used to evaluate local conditions along the subsystem. Mass transfer effects are modeled by using a black oil approximation. The model predicts the liquid penetration length in the pipeline and the liquid level in the riser, so it is possible to determine which type of severe slugging occurs in the system. The method of characteristics is used to simplify the differentiation of the resulting hyperbolic system of equations. The equations are discretized and integrated using an implicit method with a predictor-corrector scheme for the treatment of the nonlinearities. Simulations corresponding to severe slugging conditions are presented and compared to results obtained with OLGA computer code, showing a very good agreement. A description of the types of severe slugging for the three-phase flow of gas, oil and water in a pipeline-riser system with mass transfer effects are presented, as well as a stability map. (C) 2011 Elsevier Ltd. All rights reserved.

Influence of Mid-Trimester Amniotic Fluid on Endogenous and Lipopolysaccharide-Mediated Responses of Mononuclear Lymphoid Cells

Problem We evaluated the influence of amniotic fluid (AF) on immune mediator production by mononuclear leukocytes. Method of study Thirty mid-gestation AFs were incubated with peripheral blood mononuclear cells (PBMCs) in the presence or absence of lipopolysaccharide (LPS). Supernatants were tested for interleukin (IL) -6, 10, 12, 23, tumor necrosis factor-alpha (TNF-alpha) and monocyte chemotactic protein (MCP)-1. Results Endogenous mediator production was minimal or non-detectable. AF stimulated endogenous MCP-1, IL-6 and TNF-alpha release. In the presence of LPS, production of MCP-1 and IL-10 by PBMCs was enhanced eightto ninefold by AF. Release of IL-6 and IL-23 was enhanced less than twofold by the addition of AF while TNF-alpha production was unchanged. AF-stimulated mediator production was similar irrespective of pregnancy outcome. Conclusion Selective AF stimulation of LPS-mediated MCP-1 and IL-10 release may be a mechanism to promote antibody production and the influx of phagocytic cells to engulf pathogens while downregulating the production of pro-inflammatory cytokines.

Estimation of transpiration of the 'Valencia' orange young plant using thermal dissipation probe method

Most studies on measures of transpiration of plants, especially woody fruit, relies on methods of heat supply in the trunk. This study aimed to calibrate the Thermal Dissipation Probe Method (TDP) to estimate the transpiration, study the effects of natural thermal gradients and determine the relation between outside diameter and area of xylem in 'Valencia' orange young plants. TDP were installed in 40 orange plants of 15 months old, planted in boxes of 500 L, in a greenhouse. It was tested the correction of the natural thermal differences (DTN) for the estimation based on two unheated probes. The area of the conductive section was related to the outside diameter of the stem by means of polynomial regression. The equation for estimation of sap flow was calibrated having as standard lysimeter measures of a representative plant. The angular coefficient of the equation for estimating sap flow was adjusted by minimizing the absolute deviation between the sap flow and daily transpiration measured by lysimeter. Based on these results, it was concluded that the method of TDP, adjusting the original calibration and correction of the DTN, was effective in transpiration assessment.

Studies of Heavy Baryons in DELPHI and Radiation Monitoring in DØ

Between the years 1992 and 1995 about 3.5 million hadronic Z decays were collected by the DELPHI detector at CERN. This data has been used to measure the production and lifetime of the beauty strange baryon Ξb, in the inclusive decay channel Ξb →Ξ-ℓ- X. The Ξ- baryon was reconstructed through the decay Ξ- → Λ π-, using a constrained fit method for cascade decays. An iterative discriminant analysis was used for the Ξb selection. A search for the Ξb baryon was also performed using an alternative method of reconstructing the Ξ- baryon. A measurement of the production of the charmed strange baryon Ξc in the decay channel Ξc → Ξ-π+ using the same data is also presented. The radiation monitoring system of the Silicon Microstrip Tracker in the DØ detector is studied and used to estimate the radiation dose received by the Silicon detector during normal running conditions of the TeVatron accelerator.

Global trade, food production and ecosystem support : Making the interactions visible

Modern food production is a complex, globalized system in which what we eat and how it is produced are increasingly disconnected. This thesis examines some of the ways in which global trade has changed the mix of inputs to food and feed, and how this affects food security and our perceptions of sustainability. One useful indicator of the ecological impact of trade in food and feed products is the Appropriated Ecosystem Areas (ArEAs), which estimates the terrestrial and aquatic areas needed to produce all the inputs to particular products. The method is introduced in Paper I and used to calculate and track changes in imported subsidies to Swedish agriculture over the period 1962-1994. In 1994, Swedish consumers needed agricultural areas outside their national borders to satisfy more than a third of their food consumption needs. The method is then applied to Swedish meat production in Paper II to show that the term “Made in Sweden” is often a misnomer. In 1999, almost 80% of manufactured feed for Swedish pigs, cattle and chickens was dependent on imported inputs, mainly from Europe, Southeast Asia and South America. Paper III examines ecosystem subsidies to intensive aquaculture in two nations: shrimp production in Thailand and salmon production in Norway. In both countries, aquaculture was shown to rely increasingly on imported subsidies. The rapid expansion of aquaculture turned these countries from fishmeal net exporters to fishmeal net importers, increasingly using inputs from the Southeastern Pacific Ocean. As the examined agricultural and aquacultural production systems became globalized, levels of dependence on other nations’ ecosystems, the number of external supply sources, and the distance to these sources steadily increased. Dependence on other nations is not problematic, as long as we are able to acknowledge these links and sustainably manage resources both at home and abroad. However, ecosystem subsidies are seldom recognized or made explicit in national policy or economic accounts. Economic systems are generally not designed to receive feedbacks when the status of remote ecosystems changes, much less to respond in an ecologically sensitive manner. Papers IV and V discuss the problem of “masking” of the true environmental costs of production for trade. One of our conclusions is that, while the ArEAs approach is a useful tool for illuminating environmentally-based subsidies in the policy arena, it does not reflect all of the costs. Current agricultural and aquacultural production methods have generated substantial increases in production levels, but if policy continues to support the focus on yield and production increases alone, taking the work of ecosystems for granted, vulnerability can result. Thus, a challenge is to develop a set of complementary tools that can be used in economic accounting at national and international scales that address ecosystem support and performance. We conclude that future resilience in food production systems will require more explicit links between consumers and the work of supporting ecosystems, locally and in other regions of the world, and that food security planning will require active management of the capacity of all involved ecosystems to sustain food production.

Evaluation of alkali flooding combined with intermittent flow in carbonate reservoir

The majority of carbonate reservoir is oil-wet, which is an unfavorable condition for oil production. Generally, the total oil recovery after both primary and secondary recovery in an oil-wet reservoir is low. The amount of producible oil by enhanced oil recovery techniques is still large. Alkali substances are proven to be able to reverse rock wettability from oil-wet to water-wet, which is a favorable condition for oil production. However, the wettability reversal mechanism would require a noneconomical aging period to reach the maximum reversal condition. An intermittent flow with the optimum pausing period is then combined with alkali flooding (combination technique) to increase the wettability reversal mechanism and as a consequence, oil recovery is improved. The aims of this study are to evaluate the efficiency of the combination technique and to study the parameters that affect this method. In order to implement alkali flooding, reservoir rock and fluid properties were gathered, e.g. interfacial tension of fluids, rock wettability, etc. The flooding efficiency curves are obtained from core flooding and used as a major criterion for evaluation the performance of technique. The combination technique improves oil recovery when the alkali concentration is lower than 1% wt. (where the wettability reversal mechanism is dominant). The soap plug (that appears when high alkali concentration is used) is absent in this combination as seen from no drop of production rate. Moreover, the use of low alkali concentration limits alkali loss. This combination probably improves oil recovery also in the fractured carbonate reservoirs in which oil is uneconomically produced. The results from the current study indicate that the combination technique is an option that can improve the production of carbonate reservoirs. And a less quantity of alkali is consumed in the process.