925 resultados para Metapragmatic awareness
Resumo:
Historically, shifts to reduced and no-tillage management for production of crops were fostered by needs to decrease soil erosion and loss of organic matter, reduce fuel and labour costs and conserve soil water, as compared with conventional fallow tillage management. Recent interest in maintaining soil quality has been stimulated by a renewed awareness of the importance of soil condition to both the sustainability of agricultural production systems and environmental quality (Doran and Parkin, 1996). The aim of this project was to determine the impact on the physical, chemical and microbiological status of the soil of conventional and reduced tillage. It has been suggested that the reduced soil disturbance associated with the tine cultivator improves soil structure, increases nutrient content in the top 10cm of soil, increases microbial activity and improves physical characteristics. From this study it was determined that the environmental benefits linked to reduced tillage in literature, did not develop in the first two years of this programmes implementation. The results of this study determined that soil nutrients did not increase in concentration in the top 10 cm of soil under reduced cultivation. The only exception was exchangeable potassium. As potassium is not a mobile nutrient its movement is dependent on soil disturbance, therefore under reduced cultivation its concentration was allowed to accumulate in the upper horizon of the soil profile. Microbial activity was greater in the conventionally tilled treatments, as determined by total aerobic bacterial numbers. This could be due to the increased rates of soil aeration in this treatment. Numbers of aerobic bacteria were greater in the conventional tillage treatments at both incubation temperatures of 22 and 32° C. The physical characteristics of the soil determined, indicate that below the depth of soil cultivation, cone penetration resistance increases. Therefore the reduced cultivation treatments would be more prone to soil compaction, higher in the soil profile.
Resumo:
Energy management is the process of monitoring, controlling and conserving energy in a building or organisation. The main reasons for this are for cost purposes and benefit to the environment. Through various techniques and solutions for lighting, heating, office equipment, the building fabric etc along with a change in people’s attitudes there can be a substantial saving in the amount spent on energy. A good example o f energy waste in GMIT is the lighting situation in the library. All the lights are switched on all day on even in places where that is adequate daylighting, which is a big waste o f energy. Also the lights for book shelves are left on. Surely all these books won’t be searched for all at the one time. It would make much more sense to have local switches that the users can control when they are searching for a particular book. Heating controls for the older parts o f the college are badly needed. A room like 834 needs a TRV to prevent it from overheating as temperatures often reach the high twenties due to the heat from the radiators, computers, solar gains and heat from users o f the room. Also in the old part o f the college it is missing vital insulation, along with not being air tight due to the era when it was built. Pumped bonded bead insulation and sealant around services and gaps can greatly improve the thermal performance o f the building and help achieve a higher BER cert. GMIT should also look at the possibility o f installing a CHP plant to meet the base heating loads. It would meet the requirement o f running 4500 hours a year and would receive some financial support from the Accelerated Capital Allowance. I f people’s attitudes are changed through energy awareness campaigns and a few changes made for more energy efficient equipment, substantial savings can be made in the energy expenditure.
Resumo:
As manufacturers face an increasingly competitive environment, they seek out opportunities to reduce production costs without negatively affecting the yield or the quality of their finished products. The challenge of maintaining high product quality while simultaneously reducing production costs can often be met through investments in energy efficient technologies and energy efficiency practices. Energy management systems can offer both technological and best practice efficiencies in order to achieve substantial savings. A strong energy management system provides a solid foundation for an organisation to reduce production costs and improve site efficiency. The I.S EN16001 energy management standard specifies the requirements for establishing, implementing, maintaining and improving an energy management system and represents the latest best practice for energy management in Ireland. The objective of the energy management system is to establish a systematic approach for improving energy performance continuously. The I.S EN16001 standard specifies the requirements for continuous improvement through using energy more efficiently. The author analysed how GlaxoSmithKline’s (GSK) pharmaceutical manufacturing facility in Cork implemented the I.S. EN16001 energy management system model, and defined how energy saving opportunities where identified and introduced to improve efficiency performance. The author performed an extensive literature research in order to determine the current status of the pharmaceutical industry in Ireland, the processes involved in pharmaceutical manufacturing, the energy users required for pharmaceutical manufacturing and the efficiency measures that can be applied to these energy users in order to reduce energy consumption. The author then analysed how energy management standards are introduced to industry and critically analysed the driving factors for energy management performance in Ireland through case studies. Following an investigation as to how the I.S. EN16001 energy management standard is operated in GSK, a critical analysis of the performance achieved by the GSK energy management system is undertaken in order to determine if implementing the I.S EN16001 standard accelerates achieving energy savings. Since its introduction, the I.S. EN16001 model for energy management has enabled GSK to monitor, target and identify energy efficiency opportunities throughout the site. The model has put in place an energy management system that is continuously reviewed for improvement and to date has reduced GSK’s site operations cost by over 30% through technical improvements and generating energy awareness for smarter energy consumption within the GSK Cork site. Investment in I.S. EN16001 has proved to be a sound business strategy for GSK especially in today's manufacturing environment.
Resumo:
This study explores the perception of risk and the level of risk management implementation in the renewable sector. Risk management is emerging as a key issue due to the loss of confidence amongst banks, causing the attainment of financing to be difficult over the next few years. To attract financing, there is a fundamental requirement to manage risk in a way that minimizes the probability of a negative financial impact on the project. Miller and Lessard (2001) argue that successful projects are not selected but shaped with risk resolution in mind. Rather than evaluating projects at the outset based on projections of the full set of benefits, costs and risks over their lifetime, successful developers start with project ideas that have the potential of becoming viable. Therefore, this study bridges the gap that exists within the renewable sector in relation to risk management literature. This study succeeds through a detailed comparative case study analysis where two developers and two financiers were questioned through qualitative semi-structured interviews on the concept of risk management and its level implementation within the industry. It is believed that the growth in financed renewable energy projects depends on the adequate design and implementation of risk management to mitigate inherent project risks. However, this study revealed that are certain types of developers in existence within the renewable sector, which underestimate the magnitude of risk and view the development of projects as a ‘money racket’. Therefore, it can be concluded that perception of risk will also differ, causing risk and uncertainty to vary from project to project, resulting in investment reluctance to be associated with certain projects. The study originality lies in how it demonstrates to developers the concept of risk management, outlining the simplicity and benefits of implementing it in project development. Finally, this study contributes to the knowledge by enhancing the awareness and understanding of the presence and nature of risk in a RE project environment.
Resumo:
Driven by concerns about rising energy costs, security of supply and climate change a new wave of Sustainable Energy Technologies (SET’s) have been embraced by the Irish consumer. Such systems as solar collectors, heat pumps and biomass boilers have become common due to government backed financial incentives and revisions of the building regulations. However, there is a deficit of knowledge and understanding of how these technologies operate and perform under Ireland’s maritime climate. This AQ-WBL project was designed to address both these needs by developing a Data Acquisition (DAQ) system to monitor the performance of such technologies and a web-based learning environment to disseminate performance characteristics and supplementary information about these systems. A DAQ system consisting of 108 sensors was developed as part of Galway-Mayo Institute of Technology’s (GMIT’s) Centre for the Integration of Sustainable EnergyTechnologies (CiSET) in an effort to benchmark the performance of solar thermal collectors and Ground Source Heat Pumps (GSHP’s) under Irish maritime climate, research new methods of integrating these systems within the built environment and raise awareness of SET’s. It has operated reliably for over 2 years and has acquired over 25 million data points. Raising awareness of these SET’s is carried out through the dissemination of the performance data through an online learning environment. A learning environment was created to provide different user groups with a basic understanding of a SET’s with the support of performance data, through a novel 5 step learning process and two examples were developed for the solar thermal collectors and the weather station which can be viewed at http://www.kdp 1 .aquaculture.ie/index.aspx. This online learning environment has been demonstrated to and well received by different groups of GMIT’s undergraduate students and plans have been made to develop it further to support education, awareness, research and regional development.
Resumo:
The present diploma thesis analyses the German political understanding of social inequalities in health (SIH) among children and adolescents, and explores the political strategies that are perceived as most effective to tackle SIH. The study is based on the qualitative content analysis of official political documents developed at different political levels, which were the national level as well as two purposefully selected counties, Mecklenburg-Vorpommern and Niedersachsen. The study's findings indicate a beginning awareness of the existence of SIH in Germany. Nevertheless, this judgement refers to few publishing ministries only, both at national and county levels. The suggested approaches to tackle SIH vary significantly among the analysed documents, and no consensus can be identified with regard to the preference of upstream or downstream policies. The existence of the social gradient is not criticised in any of the analysed data. However, there seems to be a common agreement on the importance of setting related interventions and the contribution of both the national, regional, and local politic levels. As the absence of a central coordinator can explain these highly heterogeneous findings, key recommendations concern the establishment of a nation-wide coordinator and a nation-wide collection of best practice examples. Here, the Federal Centre for Health Education has an adequate position and the required competences to act as a coordinator and facilitator. Further requirements for a successful reduction of SIH in Germany are the extension of a continuous communication between all actors, the adoption of the planned German Prevention Law, and the nation-wide and early promotion of children as part of education policies in the federal states.
Resumo:
ABSTRACT The smallnose fanskate, Sympterygia bonapartii Müller & Henle, 1841 is one of the most disembarked items in commercial harbors in Argentina. In this work, the microscopic architecture of mature male gonads and the dynamics of cysts development are analyzed as a contribution to awareness of the reproductive biology of the species. Some biological data related to reproduction are given as well. Two seasons were sampled (fall and spring) and length classes's frequency distribution and maturity stages frequency distribution are given. Size at first sexual maturation for males was estimated at 57 cm of total length. Testes are symmetric, peer, lobed, with several germinal zones. Inside the gonads, there are many spermatocysts, containing reproductive cells at the same developmental stage. On the basis of their cytological and microanatomical features, several maturative degrees of the spermatogenic series were differentiated. Few Leydig cells were recognized at the interstitial tissue among cysts. The microscopic and semiquantitative analysis performed in this work provides morphological information about male gametogenesis and some biological data for the North Patagonian population of this economically and ecologically important species.
Resumo:
In this work we present a proposal for a course in translation from German into Spanish following the task based approach as known in second language acquisition. The aim is to improve the translation competence of translation students. We depart from the hypothesis that some students select inapropiate translation strategies when faced with certain translation problems leading them to translation errors. In order to avoid these translation errors originated by wrong application of such strategies we propose a didactic method which helps to prevent them by a) raising awareness of the different subcompetences required while translating, b) improving the ability to identify translation problems and relate them to the different subcompetences and c) enhancing the use of the most adequate strategy according to the characteristics of each problem. With regard to translation and how translation competence is acquired our work follows the communicative approach to translation theory as defended among others by Hatim & Mason (1990), Lörscher (1992) and Kiraly (1995), where translation is seen as a communicative activity which can be analized from a psycholinguistic perspective. In this sense we give operative definitions for what we understand by “translation problem”, “translation strategy”, “translation error”, “translation competence” and “translation”. Our approach to didactics adapts recent developments in Second Language Teaching within the communicative paradigm as is the task based approach by Nunan (1989) acquisition to translation. Fitting the recquirements of this pedagogic approach we present a planning for a translation course which is compatible with present translation studies.
Resumo:
Estudi realitzat per avaluar la possibilitat i viabilitat d’instal·lació de panells solar fotovoltaics als terrats de les comunitats de veïns del Districte de l’Eixample de Barcelona. La seva finalitat és conscienciar a la població sobre la problemàtica actual del canvi climàtic fent ús de la ciutat com a element clau per a fomentar l’estalvi de consum energètic i la reducció d’emissions de diòxid de carboni (CO2). Els resultats obtinguts ens donen un valor aproximat de la superfície i potència necessària pels habitants de la ciutat de Barcelona i Catalunya, per tal de cobrir el seu consum d’electricitat d’ús domèstic amb energia solar fotovoltaica, així com una comparativa amb els resultats obtinguts en el Districte de l’Eixample en les dimensions: socio-econòmica, mediambiental i política.
Resumo:
The fracture risk assessment tool (FRAX(®)) has been developed for the identification of individuals with high risk of fracture in whom treatment to prevent fractures would be appropriate. FRAX models are not yet available for all countries or ethnicities, but surrogate models can be used within regions with similar fracture risk. The International Society for Clinical Densitometry (ISCD) and International Osteoporosis Foundation (IOF) are nonprofit multidisciplinary international professional organizations. Their visions are to advance the awareness, education, prevention, and treatment of osteoporosis. In November 2010, the IOF/ISCD FRAX initiative was held in Bucharest, bringing together international experts to review and create evidence-based official positions guiding clinicians for the practical use of FRAX. A consensus meeting of the Asia-Pacific (AP) Panel of the ISCD recently reviewed the most current Official Positions of the Joint Official Positions of ISCD and IOF on FRAX in view of the different population characteristics and health standards in the AP regions. The reviewed position statements included not only the key spectrum of positions but also unique concerns in AP regions.