Avaliação experimental de medidas de aceleração

Acceleration is a key parameter for engineering and is becoming increasingly important because of the need for companies to become more competitive in the market. Both applying new technologies to their products and optimizing their process lines with predictive maintenance and robotic automation. This study aims to analyze the quality of the signals obtained from a capacitive accelerometer. To do that a test rig was mounted, which consist of a shaker, fed by a signal generator, a linear potentiometer and a capacitive accelerometer; for the signal acquisition was used a acquisition board and the Labview software, in order to integrate twice the signal from the accelerometer and compare it with the sign of the potentiometer. This work also demonstrates the impact of acquired signal processing as well as techniques of pre and post processing of signal via software GNU/Octave

Análise dos procedimentos metodológicos de dimensionamento e execução de parede diafragma

The present paper conducts an analysis of all steps for the construction of diaphragm walls, from obtaining the soil parameters until its execution. Construction stages of diaphragm wall are detailed. The paper presents a detailed analysis of the main available calculation methods to obtain the soil parameters and the design of the diaphragm wall. A case history extensively documented in previous research and present in international symposiums was chosen for an analysis of construction process and excavation’s instrumentations, as well as emphasizing the importance of temporary works and construction sequence for deep excavation with cast in-situ diaphragm walls. In general, it is possible to conclude the main difficulty and uncertainty of the dimensioning are obtaining the soil parameter for diaphragm wall design. And, it is also possible to conclude the monitoring and execution control are paramount to the success of the diaphragm wall construction

Análise do comportamento em fadiga de rodas ferroviárias fabricadas pelos processos de forjamento e fundição

Since the beginning of the railway industry until today, rail wheels are important components to the good working of a railway. For being a critical security item, design and maintenance are done with extremely care to avoid failures. Despite de fact of railway components be projected to support a big number of cyclic solicitation during its life, some accidents still occur. These accidents, despite the low frequency, always have great consequences, drawing in great financial, material, and people losses. Nowadays, railway component failure is relatively low, because it’s been projected to work below the materials Fatigue Resistance Limit, however, with the growing demand of faster trains and higher load for each axle, the occurrence probability is even bigger. This work includes a comparative study of two fabrication processes (casting and forging) applied in the production of rail wheels where it was measured the mechanical properties of traction and fatigue. The study also verified through microstructural analysis, hardness, traction and fatigue tests, statistical analysis of fatigue test results and fractographic analysis that forging process lead to better correlations between fatigue life and mechanical properties, providing more security in railroads, less wagon retention caused by corrective maintenance and smaller operational cost with its use

Melhorias na linha de planificadora contínua com o uso de transporte por sucção e enrolador de refiles

With the market more and more disputed and negotiations where the customer is the main factor who decides whether the companies have conditions or not to dispute the market, industries must search improvements in products and processes targeting lower costs and better quality. With that in mind, this work will study the actual situation of a line of Tension Leveler, after cold mill process, for aluminum coil, and search new technologies, precisely the Scrap Baller machine, which will raise the quality level and the line’s productivity. It will be analyzed the justifications (reasons) for these new technologies, the history, the involved concepts, the operation, functions, the material that will be tension leveled, the limitations and tech and economic viability in comparison with the actual system. Also it will be taken a brief about the aluminum coil production in Brazil, especially the ones which destiny is aluminum beverage can, and the recycling process, that is very well done in Brazil, worldwide leader in aluminum recycling

Análises tectono-estratigráfica e faciológico-diagenética da coquina-reservatório Lagoa Feia, Campo de Linguado, Bacia de Campos

A tectono-stratigraphic study of bivalve coquina-reservoir of Linguado Field allowed to identify two trends of permoporosity development. The delineation of these depositional-diagenetic traps were made through structural and stratigrafic cross-sections and maps. It resulted in the identification of shelf-ramp systems (tilted to SSE), it tickens from 60 to 70 meters and ends against an antithetic fault. The main coquina is bounded by fine siliciclastic units, white clay (low Gamma Ray values) or shale (high Gamma Ray values) lithologies, influencing diagenesis of basal or top coquina limestones (cimented, non-porous). Also in the middle of coquina-reservoir the “clayer” material is also associated with cemented carbonates, with also compartimentalize the reservoir into two subzones. The coquina porosity of the subzones is taken from density-neutron logs, while induction log estimates permeabilities and fluid saturations. It’s noticed the porosity development into pairs, good one followed by a regular/poor one and vice versa. These pairs form verticals succession, pair cycles where porosity improves or decreases upwards. These two scales of pore heterogeneity impose strong layering to the reservoir, and influences fluid saturations, oil-water contacts and porosity cut-offs. In a cross-section with density and induction logs, it can be observed the porosity variation along the shelf-ramp coquina (between 3LI_0004_RJS e 3RJS_0157C_RJ), the porosity is better developed in a downdip direction in the case of the two shelf wells, and also be the three ramp wells. The southern west downdip, 3RJS_0157C_RJ well, has best porosity pairs-cycles; however, its lowest structural conditions favour water saturation. Therefore it is fundamental for reservoir fluid evaluation a cross-plot analysis of RHOB-NPHI and Induction logs

Efeito da adição de inulina no crescimento, resistência gastrintestinal e capacidade de remoção de colesterol de Lactobacillus helveticus 416 e Enterococcus faecium CRL 183

O objetivo do presente estudo foi verificar o efeito da adição de um prebiótico nas características de crescimento, resistência às condições do trato gastrintestinal e remoção de colesterol in vitro, das cepas de Enterococcus faecium CRL183 e Lactobacillus helveticus 416. A fonte de prebiótico foi composta por Inulina GR – Orafti, sendo testadas as seguintes concentrações: 1,0%, 2,0%, 3,0%; 4,0%; 5,0% e 6,0% p/v). Para a avaliação da resistência às condições do trato gastrintestinal, os microrganismos foram colocados em contato com um fluido gástrico simulado por 2 horas (9g/L de NaCl, 3g/L de pepsina, pH 1,8) e com um fluido intestinal simulado por 3 horas (0,9g/L de pancreatina, 12,5g/L de bicarbonato de sódio e 6,0 g/L de Oxgall). Após o período de contato com os fluidos, foram realizadas diluições seriais e plaqueamento em meios específicos. No estudo de redução de colesterol, meios de cultura contendo inulina e colesterol (1%) foram inoculados com as cepas probióticas e incubados em anaerobiose a 37°C/24h. A capacidade de redução do colesterol foi determinada pela diferença entre a concentração de colesterol adicionada ao meio de cultura e a de colesterol residual. Os resultados foram submetidos à análise de variância e teste de médias de Tukey (p≤0,05). A adição de inulina não resultou em alteração no ciclo logarítmico de crescimento dos microrganismos. Porém, quando os dados foram submetidos à análise estatística, constatou-se que a adição de 1% a 4% de inulina inibiu o crescimento de Lactobacillus helveticus 416, sendo que para as concentrações de 5% a 6% estas alterações não foram perceptíveis. A cepa de Enterococcus faecium CRL 183 apresentou crescimento superior na presença de 2% e 4% de inulina. Após o contato com o fluido gástrico simulado, observou-se redução de 1 ciclo logarítmico no crescimento da cepa... (Resumo completo, clicar acesso eletrônico abaixo)

SIG e álgebra de mapas na elaboração de um mapa de potencial de erosão em áreas de silvicultura

Cette étude visait à générer une carte du potentiel d'érosion pour la Ferme Santa Edwirges, située à Lorena /SP. Les résultats ont etés classifiés en faible, modéré, élève et très élève potentiel d'érosion et la carte obtenue a été comparé par rapport aux autres cartes existantes pour la zone d'étude. La méthodologie proposée se basant sur une application qualitative simple L’équation Universelle de Perte de Sol (USLE ou EUPS), en considérant les parties de l'équation: érodibilité, la topographie et l'utilisation des terres. Les donnés ont etés intégrés par l'algèbre de carte dans l’environnement SIG de ArcGIS. Pour la représentation de chacune de ces parcelles, nous avons utilisé une carte des formations superficielles de la ferme, généré à partir d'une ré-interprétation de la carte géologique, une carte de la pente et une carte d'utilisation des terres, attribuant un poids d’important pour chaque catégorie de ces cartes dans le processus d'érosion et dans l'algèbre proposée. Les résultats obtenus sont compatibles avec les zones identifiées comme les plus critiques sur terrain. La ferme a été identifiée comme de potentiel d'érosion modérée et la partie sud de la ferme le plus critique, suivi du groupe conduit par la zone de cisaillement, par contre les plaines proches des rivières ont eté identifié comme la zone plus stable avec moins de potentiel d'érosionDe la comparaison des résultats de ce travail et d'autres qui ont fait antérieurement dans la zone d’intéresse, qui ont utilisé les paramètres géotechniques dans la représentation de l'érosivité des sols, nous avons pu voir des résultats similaires, en particulier dans les zones à potentiel élevé et faible pour l'érosion. De la discussion et analyse des résultats, la méthodologie proposée à eté validée

Estudo da influência da aplicação do fluido de corte no torneamento da liga de alumínio AA7075

One of the ways to minimize the effects of unproductive time caused by tool wear can be achieved by introducing an efficient system of lubrication and cooling in the process. However, in the last decade the research had the goal to restrict the maximum use of refrigerants and / or lubricants in metal-mechanical production. The important factors that justify this procedure include the operational costs of production, ecological issues, and the legal requirements of environmental conservation and preservation of human health. The purpose of the proposed work is the study of machining by turning with the focus on the influence caused by the application of cutting fluid in several ways of application (abundant and MQF) and also by comparing the results obtained by machining without the presence of fluid . For this purpose, the turning tests are conducted using an aluminum alloy (AA 7075). The response variables to be analyzed were obtained from the roughness (Ra and Ry), the stresses presented (VB) and their progression in relation to the cutting length achieved, the type of chip formed, in addition to changes in the degree of finish (roughness) presented by the turned parts. The results of this study should provide more detailed information about the actual influence of cutting fluids in turning this alloy, which are characterized by high rates of deformation when the formation of damaging your chip machining and also the quality of surface generated. Therefore, it is expected to provide subsidies to promote the optimization of machining this alloy making the most of the role of cutting fluid

Análise de patologias de estradas vicinais para proposta de intervenção mínima visando a sua perenização

The unpaved back roads, despite their simplicity, are of paramount importance to the municipalities that their economy basis are in agri-livestock and a large portion of their population lives in rural areas, as it is from these pathways that flow of production is performed and ensuring access of the rural population to urban centers is allowed. Aiming the importance of these rural roads, this work studies the case of pathologies found in local roads of São Luiz do Paraitinga, located in the Vale do Paraíba upstate São Paulo, due to lack of a periodic maintenance program the roads not withstood the heavy rains late in the year 2009 and early 2010, generating major impacts on society and the economy of the city. From surveys conducted in the field, it was analyzed the various pathologies found (pathology drainage, slope and platform) checking also the nature of their occurrence, therefore propose solutions for intervention in rural roads, to decrease the susceptibility of these roads during the rainy season

Fases de investigação geológico-geotécnica para a implantação de dutovias

The research addresses the need for detailed geological and geotechnical investigations in pipeline’s design, given the diversity of geological units crossed by these works along its layout, which often extends for hundreds of miles. For its large size, this type of work often goes through different states and regions with very different characteristics in terms of topography, vegetation, geology and geotechnical conditions. For a better use of these investigations in order to avoid unnecessary costs and inefficient results, some authors recommend that steps be taken to study, seeking a progressive detail of the pipeline’s implantation area. The main objective of the study is to describe, analyze and correlate the proposals for geological and geotechnical’s investigation recommended by the authors selected. Nogueira Junior & Marques (1998) suggest that for better effectiveness of geological and geotechnical investigations associated with the deployment of pipelines, different research methods are applied sequentially in five major stages of the building. Rocha et al (2008) recommend that, for the pipeline’s implantation using horizontal directional drilling, investigations are performed in three phases of study, to be developed in coordination with the project stages. For Gelinas & Mathy (2004), when time and budget constraints permit, geotechnical investigations for directional drilling projects for pipelines must be made in four sequential phases. Heinz (2008) suggests that the geotechnical investigations for pipeline’s implantation using horizontal directional drilling at crossings of water bodies are carried out in three successive stages. By the development of research, we could see that all the different proposals recommend studies in sequential phases, starting from a more general scale for a more specific, seeking a progressive understanding of the geological model of the area where you intend to deploy the pipeline

Avaliação da atividade anti -ulcerogênica, antidiarréica e antiinflamatõria de astronium fraxinifolium Schott: Uma espécie medicinal do cerrado

Este trabalho visa o estudo dos efeitos biológicos dos extratos hidroalcóolicos (HDA) obtidos das cascas e folhas de Astronium fraxinifolium (Anacardiaceae), uma espécie medicinal do Cerrado brasileiro. Com base nas indicações populares de uso da espécie no combate a diversos males como a diarréia, cólicas, inflamação e reumatismo e a confirmação pela literatura da atividade gastroprotetora da espécie congênere Astronium urundeuva, foram realizados modelos experimentais in vivo para caracterizar a propriedade anti-úlcera, antidiarrêica e antiinflamatória dos extratos hidroalcóolicos de cascas (A.f.cs) e folhas (A.f.fol) de A. fraxinifolium. A propriedade antiulcerogênica dos A.f.cs e A.f.fol, administrado pela via oral, em diferentes doses (125, 250 e 500 mg/kg) foi avaliada em modelos experimentais in vivo em que os ratos Wistar machos foram confrontados com agentes ulcerogênicos químicos como etanol absoluto e droga antiinflamatória não-esteroidal (DAINE). Os fatores envolvidos na gastroproteção dos extratos foram avaliados através da quantificação de glutationa total do raspado da mucosa, volume do suco gástrico, concentração de íons H+ e pH do suco gástrico. A atuação de fatores protetores da mucosa gástrica como óxido nítrico (NO) e compostos sulfidrílicos (SH) também foram analisados sob efeito de ambos os extratos. A propriedade antidiarrêica dos extratos (500 mg/kg, p.o.) também foi avaliada através da motilidade intestinal, índice de evacuações e acumulo de fluidos intestinais. Ambos os extratos (500 mg/kg, p.o. e 50 mg/kg, i.p.) também foram submetidos a avaliação em dois modelos experimentais (edema da pata induzida por carragenina e teste de formalina) onde as propriedades antiedematogênica e antiinflamatória foram analisadas em roedores. Ambos os extratos foram estudos fitoquimicamente em CLAE-DAE... (Resumo completo, clicar acesso eletrônico abaixo)

Previsão do comportamento de estruturas de contenção atirantadas utilizando o software FTOOL

Population growth, together with the gradual social ascent in Brazil, reflects at the growing need for better use of urban spaces. In this context, the amount of new buildings to meet the demand in property market, the needs for creating new roads and highways, among others, make the use of geotechnical works and, more specifically, retaining walls, more and more common. One of the simplest solutions for underground works is the use of retaining structures using tie back walls for soil support, therefore, the present work deals with this kind of structures. This paper proposes the use of FTOOL software testing in predicting deformations in tie back walls, by comparing simulations of the presented model to a real and measured deformation case in Guabirotuba Formation (PR). The results showed the importance of defining the parameters such as stiffness and curtain geometry, as well as the definition of representative loads acting on it. Also, it was pointed out that the passive response of the steel rods depends on the horizontal displacement of the wall. The study concluded that the program generates very representative results when compared to field data and seems to be a promising tool for tie back structures displacement predictions

Análise geoambietal para o planejamento de obras civis lineares: uma abordagem por sensoriamento remoto orbital

Construction of linear engineering as, roads, ducts and multiducts as roads, has a strong feature of the diversity of land on which they are deployed. This diversity involves properties geological, geomorphological and structural variety. The purpose of this work is to characterize the physical environment in relation to their ability to support the implementation of civil works linear. To achieve this, the use of orbital remote sensing, in this case, Landsat - TM. Interpretative techniques are applied to images in order to assess the forms of relief and drainage found that they can set properties and have built a favorable meaning or not to implement these works. The results and thematic maps presented in this study allow us to promote the geoenvironmental analysis for the planning phase sustainable linear civil constructions (roads and multiducts)

Aplicação do ciclo rankine orgânico alimentado termicamente pela queima da casca do arroz e resíduos de madeira

With the growing world energy demand mainly from developing countries like Brazil, Russia, India and China, the search for efficient sources of energy becomes a challenge for the coming years. Among the most widely used alternative sources, biomass is the one that grows in a more pronounced way. This study will assess the real possibility of having it as a heat source in an Organic Rankine Cycle, which employ heat transfer fluids as working fluids instead of water. From a regional data collection in agricultural production and their potential rice production and the resulting husk was defined as more appropriate. The availability of husks together with an amount of eucalyptus wood, provided by a company in the region on a monthly basis, were analyzed, and the low participation of the wood was discarded by the thermal contribution of little significance. Based on this, it was established the calorific value of fuel for thermodynamic calculations and the cycle to be used. It was then carried out the choice of working fluid from the literature and their availability in the library of software used for the simulations, the Engineering Equation Solver - ESS. The fluid most appropriate for the burning of biomass, Octamethyltrisiloxane (OMTS), was not included in the software and so the R227ea and R134a were selected. After the initial parameters modeling definition, as condensing temperature, efficiency and live steam conditions, the simulations were performed, and only the R227ea remained within the feasible thermodynamic and technological ranges. With this fluid the turbine power output was 265.7 [kW] for a scenario of 24 hours/day burning, 800.3 [kW] to biomass burning for 8 hours/day and 2134 [kW] for burning only 3 hours/day. The thermal efficiency of the cycle remained in the range of 6%, and for plants operating with the most... (Complete Abstract click eletronic access below)

Sistemas de filtragem aplicados em processos fabris automotivos

The present work resulted from a study about coolant filtration systems in industries with metalworking process in large scale. The filtration and element filter world markets move billions of Reais per year and have a promissory future considering that with the global requirements of sustainable economic development, many companies invest in new filtering technology. Either known as coolant or cutting fluid, it is used to lubricate e cool parts during machining and is necessary due to the high volume demanded in the several machining operations and to the high cost of the product. Therefore, there is the need for recycling the product after its use. The work shows the technology and fundamentals of filtration as well as different filtering elements, filtration systems and scale contamination used in the industry. Also, there is a differentiation between filtration of the surface type (cake) and depth filtration and shows the basic theory of filtration by mathematic models in different operational conditions. Ultimately, project criteria for a coolant filtration system selection is shown followed by technical-operational details of a real vacuum filtration system and a case study aiming the operational cost reduction of the system