Oxygen and Chloride Permeability of Alkali-Activated Natural Pozzolan Concrete

One of the important factors in the use of portland cement concrete is its durability, and most of the situations where durability is lacking have been identifi ed and strategies to manage durability have been implemented. Geopolymer concrete, made from an alkali-activated natural pozzolan (AANP), provides an important opportunity for the reduction of carbon dioxide (CO2) emissions associated with the manufacture of concrete but has a limited history of durability studies. Until its different properties are well understood there is no desire to adopt this new technology of unknown provenance by the concrete industry. This paper presents an experimental study of oxygen and chloride permeability of AANP concrete prepared by activating Taftan andesite and Shahindej dacite (Iranian natural pozzolans), with and without calcining, and the correlations between these properties and compressive strength. The results show that compared to ordinary portland cement (OPC) concrete, AANP concrete has lower oxygen permeability at later ages; but it shows moderate to high chloride ion penetrability.

Physico-geochemical and mineral composition of neem tree soils and relation to organic properties

The Neem tree, the oil of which has a long history of pesticide, fertilizer and medicinal use in India, has been studied extensively for its organic compounds. Here we present a physical, mineralogical and geochemical database resulting from the analyses of two Neem soil profiles (epipedons) in India. Neem tree derivatives are used in the manufacture of a variety of products, from anti-bacterial drugs and insecticides to fertilizers and animal feeds. A preliminary geochemical and mineralogical analysis of Neem soils is made to explore the potential for chemical links between Neem tree derivatives and soils. Physical soil characteristics, including colour, texture and clay mineralogy, suggest the two pedons formed under different hydrological regimes, and hence, are products of different leaching environments, one well-drained site, the other poorly drained. Geochemically, the two Neem soils exhibit similarities, with elevated concentrations of Th and rare earth elements. These elements are of interest because of their association with phosphates, especially monazite and apatite, and the potential link to fertilizer derivatives. Higher concentrations of trace elements in the soils may be linked to nutritional derivatives and to cell growth in the Neem tree.

Modelling the mixing of lead bullion during the refining process

Abstract not available

Composites and foams based on polylactic acid (PLA)

Cette étude est destinée à la production et à la caractérisation des composites d’acide polylactique (PLA) et des fibres naturelles (lin, poudre de bois). Le moussage du PLA et ses composites ont également été étudiés afin d’évaluer les effets des conditions de moulage par injection et du renfort sur les propriétés finales de ces matériaux. Dans la première partie, les composites constitués de PLA et des fibres de lin ont été produits par extrusion suivit par un moulage en injection. L’effet de la variation du taux de charge (15, 25 et 40% en poids) sur les caractéristiques morphologique, mécanique, thermique et rhéologique des composites a été évalué. Dans la deuxième étape, la poudre de bois (WF) a été choisie pour renforcer le PLA. La préparation des composites de PLA et WF a été effectuée comme dans la première partie et une série complète de caractérisations morphologique, mécanique, thermique et l’analyse mécanique dynamique ont été effectués afin d’obtenir une évaluation complète de l’effet du taux de charge (15, 25 et 40% en poids) sur les propriétés du PLA. Finalement, la troisième partie de cette étude porte sur les composites de PLA et de renfort naturel afin de produire des composites moussés. Ces mousses ont été réalisées à l’aide d’un agent moussant exothermique (azodicarbonamide) via le moulage par injection, suite à un mélange du PLA et de fibres naturelles. Dans ce cas, la charge d’injection (quantité de matière injectée dans le moule: 31, 33, 36, 38 et 43% de la capacité de la presse à injection) et la concentration en poudre de bois (15, 25 et 40% en poids) ont été variées. La caractérisation des propriétés mécanique et thermique a été effectuée et les résultats ont démontré que les renforts naturels étudiés (lin et poudre de bois) permettaient d’améliorer les propriétés mécaniques des composites, notamment le module de flexion et la résistance au choc du polymère (PLA). En outre, la formation de la mousse était également efficace pour le PLA vierge et ses composites car les masses volumiques ont été significativement réduites.

The estuarine geochemical reactivity of Zn isotopes and its relevance for the biomonitoring of anthropogenic Zn and Cd contaminations from metallurgical activities: Example of the Gironde fluvial-estuarine system, France

Zinc stable isotopes measurements by MC-ICP-MS, validated by laboratory intercalibrations, were performed on wild oysters, suspended particles and filtered river/estuarine water samples to provide new constraints for the use of Zn isotopes as environmental tracers. The samples selected were representative of the long range (400 km) transport of metal (Zn, Cd, etc.) contamination from former Zn-refining activities at Decazeville (i.e. δ66Zn > 1 ‰) and its phasing out, recorded during 30 years in wild oysters from the Gironde Estuary mouth (RNO/ROCCH sample bank). The study also addresses additional anthropogenic sources (urban and viticulture) and focuses on geochemical reactivity of Zn in the turbidity gradient and the maximum turbidity zone (MTZ) of the fluvial Gironde Estuary. In this area, dissolved Zn showed a strong removal onto suspended particulate matter (SPM) and progressive enrichment in heavy isotopes with increasing SPM concentrations varying from δ66Zn = -0.02 ‰ at 2 mg/L to +0.90 ‰ at 1310 mg/L. These signatures were attributed to kinetically driven adsorption due to strongly increasing sorption sites in the turbidity gradient and MTZ of the estuary. Oysters from the estuary mouth, contaminated sediments from the Lot River and SPM entering the estuary showed parallel historical evolutions (1979-2010) for Zn/Cd ratios but not for δ66Zn values. Oysters had signatures varying from δ66Zn = 1.43 ‰ in 1983 to 1.18 ‰ in 2010 and were offset by δ66Zn = 0.6 - 0.7 ‰ compared to past (1988) and present SPM from the salinity gradient. Isotopic signatures in river-borne particles entering the Gironde Estuary under contrasting freshwater discharge regimes during 2003-2011 showed similar values (δ66Zn ≈ 0.35 ± 0.03 ‰; 1SD, n=15), i.e. they were neither related to former metal refining activities at least for the past decade nor clearly affected by other anthropogenic sources. Therefore, the Zn isotopic signatures in Gironde oysters reflect the geochemical reactivity of Zn in the estuary rather than signatures of past metallurgical contaminations in the watershed as recorded in contaminated river sediments. The study also shows that the isotopic composition of Zn is strongly fractionated by its geochemical reactivity in the Gironde Estuary, representative of meso-macrotidal estuarine systems.

Effects of early nutrition on the wnt and bone morphogenic protein pathways in the developing intestine

Infant formula is consumed by the majority of infants in the United States for at least part of the first year of life. Infant formula lacks many of the bioactive compounds that are naturally occurring in breast milk. Because of this, there has been an increased interest by the companies that manufacture infant formula to include additives that would potentially allow formula to more closely mimic breast milk activity. One such ingredient currently being added to infant formula is prebiotics. Prebiotics are non-digestible food ingredients that beneficially affect the host by selectively stimulating the growth of specific healthful bacteria in the colon. It is speculated that prebiotics replicate the activity of breast milk oligosaccharides, which through the production of butyrate by intestinal microbiota, may interact with the Wnt/BMP pathways. The Wnt/BMP pathways regulate intestinal stem cells, which determine the growth, development and maintenance of the intestine. Therefore, the objective of this study was to explore the effects that the addition of prebiotics to formula have on the regulation of the Wnt/BMP pathways when fed to neonatal piglets, a model commonly used in the study of infant nutrition. Piglets (n=5) were randomized into sow-reared (SR), fed control formula (F), or fed formula with added prebiotics (F+P). Fructooligosaccharides (FOS) (2 g/L) and polydextrose (PDX) (2 g/L) were chosen as the prebiotics for this study, because this combination had been less studied than other combinations. Ileum and ascending colon were collected at 7 and 14 days-of-age. Dry matter content, pH, and short chain fatty acid (SCFA) content was measured. The mRNA expression of β-catenin, sFRP3, sFRP4, frizzled 6, DKK1 (Wnt pathway), gremlin (BMP pathway), TNF-a, HNF-4α and osteopontin (OPN) was measured by RT-qPCR. Piglets fed the F+P diet had greater acetate concentration and lower pH in the ileum at day 14 and in the colon at day 7 and day 14 than F piglets. Butyrate concentrations were highest in SR with F+P not differing from F in ileum at day 14 and colon at day 7 and day 14. Effects of age were seen in all genes, with the exception of OPN, sFRP-3 and sFRP-4. On day 7, no effect of diet was observed in the ileum, however, mRNA expression of DKK1 and frizzled 6 were greater in F+P than SR (p≤0.05). On day 14, gremlin expression was lower and OPN was greater in the ileum of SR piglets compared to F and F+P. Also on day 14, HNF-4α mRNA expression was greater in both ileum and colon of F+P piglets and sFRP3 mRNA expression was greater in the colon than F or SR . In summary, differences were observed between gene expression of F+P and SR piglet intestines, but the supplementation of 2 g/L scFOS and 2 g/L PDX to formula did not shift expression of genes in the Wnt/BMP pathways to be more similar to SR than F. As the Wnt/BMP pathway is known to exist in a gradient along the crypt-villus axis, with Wnt expression dominating in the crypt region and BMP expression dominating in the villi, it was possible that pooling whole tissue reduced our ability to detect treatment effects that would be concentrated in either region. A method was therefore developed to remove intestinal epithelial cells along the villus-to-crypt axis. Twenty-five-day-old F and SR piglets were euthanized and ileal tissue was collected and placed in a dissociation buffer in a shaking water bath. Exfoliated cells were removed at increasing time points from 5 to 100 minutes in order to remove cells along the villus-to-crypt axis. After the final incubation, remaining mucosal tissue was removed using a sterile glass microscope slide and pooled with the final exfoliated cell isolation. After each cell collection, a section of tissue was fixed in formalin for histomorphological examination. Expression of genes in the Wnt/BMP pathways, along with crypt marker genes (CDK5 and v-myb), were measured in both whole ileal tissue, pooled epithelial cells, and separate epithelial cell isolations from the same piglet. The expression of β-catenin, HNF-4α, TNF-α, TGF-β and the crypt marker v-myb matched the expected villus-to-crypt pattern in cells collected after 10 (incubation 1), 30 (incubation 2) and 60 (incubation 3) minutes. However, expression of expression in cells collected after 100 minutes (incubation 4) was variable, which may be due to the fact that crypt cells were not efficiently removed and the presence of unwanted non-epithelial tissue. Gremlin, OPN, DKK1, sFRP3 and sFRP4 expression was not statistically different along the villus-to-crypt axis. Frizzled 6 and CDK5 did not express as we had predicted, with expression highest towards the villi. In summary, the epithelial cell collection method used was not entirely successful. While much of the gene data suggests that cells were removed along the villus-to-crypt axis through the first three incubations, the last incubation, which involved scraping the tissue, removed non-epithelial components of the mucosa, while leaving the crypts intact. In conclusion, the addition of 2 g/L PDX and 2 g/L scFOS did not cause gene expression of the Wnt/BMP pathways to mirror either F or SR expression. New isolation methods to extract cells along the crypt-villus axis should be considered, including the use of a laser capture microdissection. While this combination of prebiotics did not yield the intended effects, future research should be done on other combinations, such as the inclusion of galactooligosaccharides (GOS), which is commonly added to food products including infant formula.

The case for cotton: a paper read before the Kosmos Club and published by request

The bulletin argues against diversification of lower yielding crops for cotton. The argument is primary economic.

The symbolic, socio-economic and exchange value of Imperial German and National Socialist medals and badges, 1701 to the present

This thesis examines the manufacture, use, exchange (including gift exchange), collecting and commodification of German medals and badges from the early 18th century until the present-day, with particular attention being given to the symbols that were deployed by the National Socialist German Workers’ Party (NSDAP) between 1919 and 1945. It does so by focusing in particular on the construction of value through insignia, and how such badges and their symbolic and monetary value changed over time. In order to achieve this, the thesis adopts a chronological structure, which encompasses the creation of Prussia in 1701, the Napoleonic wars and the increased democratisation of military awards such as the Iron Cross during the Great War. The collapse of the Kaiserreich in 1918 was the major factor that led to the creation of the NSDAP under the eventual strangle-hold of Hitler, a fundamentally racist and anti-Semitic movement that continued the German tradition of awarding and wearing badges. The traditional symbols of Imperial Germany, such as the eagle, were then infused with the swastika, an emblem that was meant to signify anti-Semitism, thus creating a hybrid identity. This combination was then replicated en-masse, and eventually eclipsed all the symbols that had possessed symbolic significance in Germany’s past. After Hitler was appointed Chancellor in 1933, millions of medals and badges were produced in an effort to create a racially based “People’s Community”, but the steel and iron that were required for munitions eventually led to substitute materials being utilised and developed in order to manufacture millions of politically oriented badges. The Second World War unleashed Nazi terror across Europe, and the conscripts and volunteers who took part in this fight for living-space were rewarded with medals that were modelled on those that had been instituted during Imperial times. The colonial conquest and occupation of the East by the Wehrmacht, the Order Police and the Waffen-SS surpassed the brutality of former wars that finally culminated in the Holocaust, and some of these horrific crimes and the perpetrators of them were perversely rewarded with medals and badges. Despite Nazism being thoroughly discredited, many of the Allied soldiers who occupied Germany took part in the age-old practice of obtaining trophies of war, which reconfigured the meaning of Nazi badges as souvenirs, and began the process of their increased commodification on an emerging secondary collectors’ market. In order to analyse the dynamics of this market, a “basket” of badges is examined that enables a discussion of the role that aesthetics, scarcity and authenticity have in determining the price of the artefacts. In summary, this thesis demonstrates how the symbolic, socio-economic and exchange value of German military and political medals and badges has changed substantially over time, provides a stimulus for scholars to conduct research in this under-developed area, and encourages collectors to investigate the artefacts that they collect in a more historically contextualised manner.

Dispersion and optimization of a calcium sulfoaluminate mortar prepared with superplasticizer

Calcium sulfoaluminate (CSA) cements/mortars are receiving increasing attention since their manufacture produces less CO2 than ordinary Portland cement (OPC) (up to 22% of decrease depending on its composition). These systems are complex and there are many parameters affecting their hydration mechanism, such as water-to-cement (w/c) ratio, type and amount of sulfate source, and so on. Low w/c ratios, within certain limits, may reduce the porosity and consequently, improve the mechanical strengths. However, it is accompanied by an increasing of viscosity and lack of both workability and homogeneity, with the consequent negative effect on the mechanical properties. The dispersion of the particles through the adsorption of the right amount and type of additives, such as superplasticizers, is a key point to improve the workability of mortars allowing both the preparation of homogeneous mixtures and the reduction of the amount of mixing water. This work deals with the preparation and optimization of homogeneous CSA-mortars with improved mechanical strengths. The optimum amount of superplasticizer was optimized through rheological measurements. The effect of different amounts of the superplasticizer on the viscosity of the mortars, its hydration mechanism and corresponding mechanical properties has been studied and will be discussed.

Synthesis and behavior of Belite-Alite-Ye’elimite (BAY) cement

Ye’elimite based cements have been studied since 70’s years in China, due to the irrelevant characteristics from a hydraulic and environmental point of view. One of them is the reduced fuel consumption, related to the lower temperature reaction required for this kind of cement production as compared to Ordinary Portland Cement (OPC), another characteristic is the reduced requirement of carbonates as a typical raw material, compared to OPC, with the consequent reduction in CO2 releases (~22%)from combustion. Thus, Belite-Ye’elimite-Ferrite (BYF) cements have been developed as potential OPC substitutes. BYF cements contain belite as main phase (>50 wt%) and ye´elimite as the second content phase (~30 wt%). However, an important technological problem is associated to them, related to the low mechanical strengths developed at intermediate hydration ages (3, 7 and 28 days). One of the proposed solutions to this problem is the activation of BYF clinkers by preparing clinkers with high percentage of coexisting alite and ye'elimite. These clinkers are known Belite-Alite-Ye’elimite (BAY) cements. Their manufacture would produce ~15% less CO2 than OPC. Alite is the main component of OPC and is responsible for early mechanical strengths. The reaction of alite and ye´elimite with water will develop cements with high mechanical strengths at early ages, while belite will contribute to later curing times. Moreover, the high alkalinity of BAY cement pastes/mortars/concretes may facilitate the use of supplementary cementitious materials with pozzolanic activity which also contributes to decrease the CO2 footprint of these ecocements. The main objective of this work was the design and optimization of all the parameters evolved in the preparation of a BAY eco-cement that develop higher mechanical strengths than BYF cements. These parameters include the selection of the raw materials (lime, gypsum, kaolin and sand), milling, clinkering conditions (temperature, and holding time), and clinker characterization The addition of fly ash has also been studied. All BAY clinker and pastes (at different hydration ages) were mineralogically characterized through laboratory X-ray powder diffraction (LXRPD) in combination with the Rietveld methodology to obtain the full phase assemblage including Amorphous and Crystalline non-quantified, ACn, contents. The pastes were also characterized through rheological measurements, thermal analyses (TA), scanning electronic microscopy (SEM) and nuclear magnetic resonance (NMR). The compressive strengths were also measured at different hydration times and compared to BYF.

Chatter avoidance in the milling of thin floors with bull-nose end mills: Model and stability diagrams

The milling of thin parts is a high added value operation where the machinist has to face the chatter problem. The study of the stability of these operations is a complex task due to the changing modal parameters as the part loses mass during the machining and the complex shape of the tools that are used. The present work proposes a methodology for chatter avoidance in the milling of flexible thin floors with a bull-nose end mill. First, a stability model for the milling of compliant systems in the tool axis direction with bull-nose end mills is presented. The contribution is the averaging method used to be able to use a linear model to predict the stability of the operation. Then, the procedure for the calculation of stability diagrams for the milling of thin floors is presented. The method is based on the estimation of the modal parameters of the part and the corresponding stability lobes during the machining. As in thin floor milling the depth of cut is already defined by the floor thickness previous to milling, the use of stability diagrams that relate the tool position along the tool-path with the spindle speed is proposed. Hence, the sequence of spindle speeds that the tool must have during the milling can be selected. Finally, this methodology has been validated by means of experimental tests.

Methodological and Technological Support for the Coordination of Smart Networks of SMEs

Part 2: Behaviour and Coordination

Obtenção de pós de tântalo metálico a partir da redução aluminotérmica com ignição a plasma

Metallic tantalum has a high commercial value due to intrinsic properties like excellent ductility, corrosion resistance, high melt and boiling points and good electrical and thermal conductivities. Nowadays, it is mostly used in the manufacture of capacitors, due to excellent dielectric properties of its oxides. In the nature, tantalum occurs in the form of oxide and it is extracted mainly from tantalite-columbite ores. The tantalum is usually produced by the reduction of its oxide, using reductants like carbon, silicon, calcium, magnesium and aluminum. Among these techniques, the aluminothermic reduction has been used as the industrial method to produce niobium, tantalum and their alloys, due to the easy removal of the Al and Al2O3 of the system, easing further refining. In conventional aluminothermic reduction an electrical resistance is used to trigger the reaction. This reaction self-propagates for all the volume of material. In this work, we have developed a novel technique of aluminothermic reduction that uses the hydrogen plasma to trigger the reaction. The results obtained by XRD, SEM and EDS show that is possible to obtain a compound rich in tantalum through this technique of aluminothermic reduction in the plasma reactor