沙埋对六种沙生植物种子萌发和幼苗出土的影响

研究了沙埋对科尔沁沙地 6种优势植物的种子萌发和幼苗出土的影响 .进行 0、2、4、6、8、10和 12cm等 7个深度沙埋处理 .结果表明 ,在不同沙埋处理时 ,沙蓬萌发差异显著 ,而差不嘎蒿 2cm埋深与其他埋深的发芽差异显著 ,其他 4种植物 0cm埋深与其他埋深的发芽差异显著 ;沙埋对所有植物幼苗出土均有显著影响 ,埋深增加 ,出苗率减小 ;繁殖体大的物种与繁殖体小的物种相比 ,能从更深沙层中出苗 ,幼苗出土最大深度排序为苦参 >东北木蓼≥沙蓬 >山竹子 >雾冰藜 >差不嘎蒿 .

遮阴对黄波罗幼苗的光合特性及光能利用效率的影响

一直以来黄波罗(Phellodendron amurense)被认为是不耐阴树种,然而引入美国纽约后,发现它具有一定的耐阴性,在全光和林下均能更新,在纽约已经成为生物入侵种。为了探讨黄波罗的耐阴性问题,通过设置自然光与遮阴(15%自然光)两种光环境,观测了三年生黄波罗幼苗(遮阴1a后)光合生理参数、光能利用效率、叶绿素和比叶重的变化。结果表明,与自然光处理相比,遮阴处理的黄波罗幼苗最大光合速率、表观量子效率和暗呼吸速率略有下降,但差异不显著(p>0.05),光补偿点下降显著(p<0.05);同时,单位面积叶绿素含量无显著差异(p>0.05),而单位干重叶绿素含量显著升高,比叶重显著下降,叶面积显著增大(p<0.05)。上述结果说明:遮阴的黄波罗幼苗通过降低光补偿点和暗呼吸速率利用环境中的弱光,同时通过减小比叶重、增大叶面积和提高叶绿素b相对含量来增强对光的捕获,使其在弱光时的光能利用效率提高。由此推断,黄波罗幼苗能适应一定程度的遮阴。

Effect of core structure on the fluorescence properties of hyperbranched poly(phenylene sulfide)

We functionalize the focal group of hyperbranched poly(phenylene sulfide) (HPPS) with benzyl, phenyl, and naphthyl group, respectively. DSC analysis shows that T-g of HPPS is increased from 55 to 93 degrees C by functionalization of the focal group with a conjugated naphthyl group. The fluorescence properties of the three core-functionalized HPPS' are studied under the comparison with the original HPPS.

Determination of Cd2+ and Pb2+ on glassy carbon electrode modified by electrochemical reduction of aromatic diazonium salts

Carbon modified by the reduction of aromatic diazonium derivatives was first used as electrode for the electrochemical stripping analysis of heavy metals. As a model, the glassy carbon electrode was modified with benzoic acid by electrochemical reduction of diazobenzoic acid, and the resulting modified electrodes were used for determination of Cd2+ and Pb2+. The anodic peak currents of cadmium and lead at the benzoic acid-modified glassy carbon electrode are 7.2 and 6 times of that at the bare glassy carbon electrode. A linear response was observed for Pb2+ and Cd2+ in the range of 0.5-50 mu g/l.

Effect of Heat Treatment Temperature on the Catalytic Performances of PtRu/C Catalysts for Methanol Electro-Oxidation

Non-ionic surfactant Triton X-100 was used as a stabilizer to prepare PtRu/C catalysts for methanol oxidation reaction (MOR). The cyclic voltammogram was used to investigate the catalytic activity for MOR of different PtRu/C catalysts. TG-DTA, EDX, XRD, XPS and TEM were Used to characterize the composition, structure and morphology of the as-prepared PtRu/C catalysts. It is found that the heat treatment plays a crucial role in the particles size, particles distribution of the PtRu/C catalysts and the oxidation state of platinum. The results show that 350 degrees C is an optimum heat treatment temperature. The as-synthesized catalyst heat-treated at this temperature exhibits the best catalytic performance for MOR.

Tunable Multiresponsive Methacrylic Acid Based Inverse Opal Hydrogels Prepared by Controlling the Synthesis Conditions

Methacrylic acid based inverse opal hydrogels (MIOHs) have been prepared by controlling the synthesis conditions, including cross-linker content, solvent content, and water content in solvent mixtures to explore the effect of the synthesis conditions (especially solvent content and mixture) on the response performance. Various response events (pH, solvent, ionic strength, 1,4-phenylenediamine dihydrochloride (PDA) response) have been investigated. For pH, solvent response, the same response behaviors have been observed: both the increased solvent (only ethanol) content and the enhanced water content in solvent will lead to the reduced response level of MIOHs compared to that of the increased cross-linker content. However, two different kinds of response behaviors for ionic strength response have been found by adjusting the synthesis conditions. The kinetics of pH response shows characteristics of a diffusion-limited process, and the equilibrium response time is about 20 min, which cannot be reduced by changing the synthesis conditions.

Investigation of proton transfer across the water/1,2-dichloroethane interface by o-phenanthroline using glass micro/nano-pipets and cyclic voltammetry

Facilitated proton transfer across the water/1,2-dichloroethane (DCE) interface supported on the tips of micro- and nano-pipets by o-phenanthroline (Phen) was studied by using cyclic voltammetry. The formed micro- and nano-liquid/liquid interfaces functioned as micro- and nano-electrodes under certain experimental conditions. The dependence of the half-wave potentials on the aqueous solutions acidities was studied and the ratio of association constants between Phen and proton in the aqueous and DCE phases was calculated by the method proposed by Matsuda et al.. The standard rate constant (k(0)) and the transfer coefficient (alpha) evaluated by using nano-pipets were equal to 0.183 +/- 0.054 cm/s and 0.70 +/- 0.09, respectively.

应用玻璃微米/纳米管和循环伏安法研究邻菲咯啉加速质子在水/1,2-二氯乙烷界面的转移过程

利用循环伏安法研究了玻璃微米 /纳米管支持的水 / 1 ,2 -二氯乙烷 ( DCE)界面上邻菲咯啉加速质子的转移过程 .将装有水溶液的微米 /纳米管插入到 DCE溶液中 ,可以形成微米 /纳米级 -液 /液界面 ,在选定的实验条件下 ,其作用类似于微米 /纳米电极 .用微米管考察了此加速转移过程的半波电位与 p H值 ( 1 .1～7.5 )的关系 ,利用 Matsuda等提出的理论公式计算了邻菲咯啉与质子在有机相和水相中的络合常数比 .并用纳米管计算得到邻菲咯啉加速质子在水 / DCE界面转移过程中的标准速率常数 ( k0 )和转移系数 (α)分别为( 0 .1 83± 0 .0 5 4 ) cm/ s和 0 .70± 0 .0

Flexural fatigue behavior of injection-molded composites based on poly(phenylene ether ketone)

Flexural fatigue tests were conducted on injection-molded short fiber composites, carbon fiber/poly(phenylene ether ketone) (PEK-C) and glass fiber/PEK-C (with addition of polyphenylene sulfide for improving adhesion between matrix and fibers), using four-point bending at stress ratio of 0.1. The fatigue behavior of these materials was presented. By comparing the S-N curves and analyzing the fracture surfaces of the two materials, the similarity and difference of the failure mechanisms in the two materials were discussed. It is shown that the flexural fatigue failure of the studied materials is governed by their respective tensile properties. The matrix yielding is main failure mechanism at high stress, while at lower stress the fatigue properties appear fiber and interface dominated. (C) 1997 John Wiley & Sons, Inc.

ELECTROCHEMICAL STUDY OF ISOPOLY-OXOMETALLATE AND HETEROPOLY-OXOMETALLATE FILM MODIFIED MICROELECTRODES .2. ELECTROCHEMICAL-BEHAVIOR OF ISOPOLYMOLYBDIC ACID MONOLAYER MODIFIED CARBON-FIBER MICROELECTRODES

In this paper the electrochemical properties of isopolymolybdic anion thin film modified carbon fibre (CF) microelectrode prepared by simple dip coating have been described. The modified electrode shows three couples of surface redox waves between + 0.70 and - 0.1 V vs. sce in 2 M H2SO4 solution with good stability and reversibility. The pH of solution has a marked effect on the electrochemical behaviour and stability of the film, the stronger the acidity of electrolyte solution is, the better the stability and reversibility of isopolymolybdic anion film CF microelectrode will be. The scanning potential range strongly influences on the electrochemical behaviour of the film. The isopolymolybdic anion film prepared by the dip coating resulting a monolayer with estimated surface concentration (F) 2.8 x 10(-11) mol cm-2. From the half-peak widths and peak areas of the surface redox waves of the film electrode, the first three surface waves are corresponding to two-electron processes. The electron energy spectra show the products by six electrons reduction are a mixture of Mo(VI) and Mo(V) species. The electrochemical reaction of the isopolymolybdic anion monolayer can be expressed as Mo8O264- + mH+ + 2ne half arrow right over half arrow left [HmMo8-2n(VI)Mo2n(V)O26](4,2n-m)-n = 1, 2, 3; m = 2, 5, 7.

Diversity and spatial distribution of amoA-encoding archaea in the deep-sea sediments of the tropical West Pacific Continental Margin

The ecological characteristics of the deep-sea amoA-encoding archaea (AEA) are largely unsolved. Our aim was to study the diversity, structure and distribution of the AEA community in the sediments of the tropical West Pacific Continental Margin, to develop a general view of the AEA biogeography in the deep-sea extreme environment. Archaeal amoA clone libraries were constructed. Diverse and novel amoA sequences were identified, with the Bohol Sea, Bashi Strait and Sibuyan Sea harbouring the highest and the Bicol Shelf the lowest AEA diversity. Phylogenetic and statistical analyses illustrate a heterogeneous distribution of the AEA community, probably caused by the differential distribution of the terrestrial or estuarine AEA in the various sampling sites. The deep-sea sedimentary environments potentially harbour diverse and novel AEA in the tropical West Pacific Continental Margin. The stations in the Philippine inland seas (including station 3043) may represent AEA assemblages with various terrestrial influences and the stations connected directly to the open Philippine Sea may represent marine environment-dominant AEA assemblages. Our study indicates the potential importance of geological and climatic events in the transport of terrestrial micro-organisms to the deep-sea sedimentary environments, almost totally neglected previously.

The Bopyridae (Crustacea: Isopoda) parasitic on thalassinideans (Crustacea: Decapoda) from China

Eight species among six genera of bopyrid isopods (representing the subfamilies Pseudionmae and loninae) infesting thalassinideans from China are reported. Of these, four species are new to science: Gyge.fujianensis n. sp., Progebiophilits elongatus n. sp., Upogebione bidigitatus n. sp., and Procepon liuruiyui n. sp., infesting Upogebia major (de Haan), Nihonotrypaea japonica Ortmann, Upogebia carinicauda (Stimpson), and Austinogebia wuhsienweni (Yu). One species, lone cornuta Bate, 1864, is recorded for the first time from Chinese waters and from a new host. Pseudione longicauda Shiino, 1937, Gyge ovalis (Shiino, 1939), and Progebiophilus sinicus Markham, 1982, previously known from Hong Kong or Taiwan, are recorded for the first time from mainland China, extending their range north.

CIMS环境中的企业管理信息系统

企业管理信息系统 (EMIS) 是 CIMS 的重要组成部分.随着企业环境的演变,不仅应研究各种批量生产方式的管理方法,更应注意一样一件 (OKP) 生产方式.企业对 CIMS 环境中 EMIS 的需求不断增长,它比普通的 EMIS 更复杂.本文首先对 MRPⅡ的应用开发进行分析,认为应吸取 MRPⅡ的核心部分开发适合国情的 EMIS 产品;然后提出了 EMIS 的通用概念结构及子系统的划分.这一通用概念结构已用于沈阳鼓风机厂的 CIMS 初步设计中.