Studies on osmoregulation in the penaeid prawn Metapenaeus dobsoni (Miers)

Metapenaeus dobsoni (Miers) is the most abundant species along the coast of Kerala. It is cultured extensively by adoption of traditional farming practices. The geographical location and water source determines the seasonal and annual environmental fluctuations the prawn farming systems experiences. The life cycle of the shrimp includes its migration to the coastal deeper waters for spawning and the immigration of larvae to the estuaries for growth. The survival of the species in such complex ecosystems is thus critical to its life cycle. The animal adapts itself to different environments through a physiological process known as osmoregulation. The present study on osmoregulation in the penaeid prawn Metapenaeus dobsoni was thus undertaken to understand the mechanism adopted by this species to survive in different environments. A number of experimental work have been conducted to understand the effect of salinity on the internal variations. However the effect of the complex environmental conditions as existent in nature on the osmotic variations in this species has not been dealt with in any of the earlier studies.

Studies on the freshwater copepod fish parasites of Kerala

Studies on parasitic copepods from freshwater fishes are still in its infancy. In recent years, there- is a renewed enthusiasm in the study of freshwater fish parasites due to rapidly increasing aquaculture practices. The importance of diseases and their control assumes great significance because of the adverse impact of diseases on fish production and its economy. Copepods are one of the most harmful parasites of freshwater fishes. Reports on the damages caused by copepod parasites from different parts on the world are increasing alarmingly. But the information on parasitic copepods of freshwater fishes in India is quite meagre. Knowledge regarding this group of parasites, their Biology and pathology from Kerala. is lacking. The thesis consists of five chapters. The first chapter is a general introduction which deals with the review of literature on various aspects of parasitic copepods viz; systematics, life history, host-parasite relationship, ecology, pathogenicity, prophylaxis and control measures. Systematics of parasitic copepods of freshwater fishes collected during the present study forms the second chapter. The third chapter deals with the life cycle study of the new Lernaeid copepod, Lernaea osphronemi. The fourth chapter contains host-parasite relationship. ecology and treatment of ‘the’ new species of Lernaea On Osphronemus goramy. General observations and a summary of the entire work constitute the fifth chapter

Ecobiology of helminth parasites of finfishes and shellfishes of Cochin waters with special reference to Digenetic trematodes

The great number of parasitic species of marine and brackishwater animals that have been described indicates that parasites play an important part in the ecology of the oceans and brackishwaters. Jnspite of their importance, marine and brackish parasites are probably the least known group of organisms. Considering the large number of marine and brackishwater hosts, especially in the tropics, it is no exaggeration to say that the description of marine and brackishwater parasites has hardly begun (Rohde, 1982). With this view in mind, an attempt has been made to study the ecobiology of the helminth parasites of finfishes and shellfishes of eochin waters with special reference to digenetic trematodes. The work is broadly divided into three chapters, Chapter 1 consists of a description of the study area, prevalence of infection and concurrent infections with helminth parasites, seasonal variation, host specificity> and zoogeography of digenetic trematodes; Chapter II deals with the systematics of digenetic trematodes; and Chapter III deals with studies on larval trematodes from molluscs and crustacea, adult from a molluscan host, life-cycle, biology and histopathology

“Studies on the Biology, Morphometrics and Biochemical composition of the Ommastrephid squid, Sthenoteuthis oualaniensis (Lesson,1830) of the south west coast of India”

With the stabilization of world finfish catches in general, and the depletion of a number of fish stocks that used to support industrial-scale fisheries, increasing attention is now being paid, to the so-called unconventional marine resources, which include many species of cephalopods. One of such important cephalopod resource is the tropical Indo-Pacific pelagic oceanic squid Sthenoteuthis oualaniensis. It is the most abundant large sized squid in the Indo- Pacific region with an estimated biomass of 8-11 metric tons. However, its distribution, biology, life cycle and nutrient value in the south west coast of India are still poorly known. So any new information of this species in the waters off the south west coast of India has important scientific significance for effective and rational utilization of this Oceanic fishery resources, especially during the time of depletion of shallow water resources. In view of that this study investigated different aspects of the Sthenoteuthis oualaniensis, such as morphometry, growth, mortality, maturation, spawning, food, feeding and biochemical composition in the south west coast of India to understand its possible prospective importance for commercial fishing and management of its fishery

Modeling of ALFA Programs Using PVS Theorem Prover

In Safety critical software failure can have a high price. Such software should be free of errors before it is put into operation. Application of formal methods in the Software Development Life Cycle helps to ensure that the software for safety critical missions are ultra reliable. PVS theorem prover, a formal method tool, can be used for the formal verification of software in ADA Language for Flight Software Application (ALFA.). This paper describes the modeling of ALFA programs for PVS theorem prover. An ALFA2PVS translator is developed which automatically converts the software in ALFA to PVS specification. By this approach the software can be verified formally with respect to underflow/overflow errors and divide by zero conditions without the actual execution of the code.

Modeling of ALFA Programs Using PVS Theorem Prover

In Safety critical software failure can have a high price. Such software should be free of errors before it is put into operation. Application of formal methods in the Software Development Life Cycle helps to ensure that the software for safety critical missions are ultra reliable. PVS theorem prover, a formal method tool, can be used for the formal verification of software in ADA Language for Flight Software Application (ALFA.). This paper describes the modeling of ALFA programs for PVS theorem prover. An ALFA2PVS translator is developed which automatically converts the software in ALFA to PVS specification. By this approach the software can be verified formally with respect to underflow/overflow errors and divide by zero conditions without the actual execution of the code

Corrosion Health Monitoring System for Steel Ship Structures

Corrosion represents one of the largest through life cost component of ships. Ship owners and operators recognize that combating corrosion significantly impacts the vessels’ reliability, availability and through life costs. Primary objective of this paper is to review various inspections, monitoring systems and life cycle management with respect to corrosion control of ships and to develop the concept of “Corrosion Health” (CH) which would quantify the extent of corrosion at any point of ships’ operational life. A system approach in which the ship structure is considered as a corrosion system and divided into several corrosion zones, with distinct characteristics, is presented. Various corrosion assessment criteria for assessment of corrosion condition are listed. A CH rating system for representation of complex corrosion condition with a numeric number along with recommendations for repair/maintenance action is also discussed

A study on the performance of flexible pavements on mature soil subgrades

The country has witnessed tremendous increase in the vehicle population and increased axle loading pattern during the last decade, leaving its road network overstressed and leading to premature failure. The type of deterioration present in the pavement should be considered for determining whether it has a functional or structural deficiency, so that appropriate overlay type and design can be developed. Structural failure arises from the conditions that adversely affect the load carrying capability of the pavement structure. Inadequate thickness, cracking, distortion and disintegration cause structural deficiency. Functional deficiency arises when the pavement does not provide a smooth riding surface and comfort to the user. This can be due to poor surface friction and texture, hydro planning and splash from wheel path, rutting and excess surface distortion such as potholes, corrugation, faulting, blow up, settlement, heaves etc. Functional condition determines the level of service provided by the facility to its users at a particular time and also the Vehicle Operating Costs (VOC), thus influencing the national economy. Prediction of the pavement deterioration is helpful to assess the remaining effective service life (RSL) of the pavement structure on the basis of reduction in performance levels, and apply various alternative designs and rehabilitation strategies with a long range funding requirement for pavement preservation. In addition, they can predict the impact of treatment on the condition of the sections. The infrastructure prediction models can thus be classified into four groups, namely primary response models, structural performance models, functional performance models and damage models. The factors affecting the deterioration of the roads are very complex in nature and vary from place to place. Hence there is need to have a thorough study of the deterioration mechanism under varied climatic zones and soil conditions before arriving at a definite strategy of road improvement. Realizing the need for a detailed study involving all types of roads in the state with varying traffic and soil conditions, the present study has been attempted. This study attempts to identify the parameters that affect the performance of roads and to develop performance models suitable to Kerala conditions. A critical review of the various factors that contribute to the pavement performance has been presented based on the data collected from selected road stretches and also from five corporations of Kerala. These roads represent the urban conditions as well as National Highways, State Highways and Major District Roads in the sub urban and rural conditions. This research work is a pursuit towards a study of the road condition of Kerala with respect to varying soil, traffic and climatic conditions, periodic performance evaluation of selected roads of representative types and development of distress prediction models for roads of Kerala. In order to achieve this aim, the study is focused into 2 parts. The first part deals with the study of the pavement condition and subgrade soil properties of urban roads distributed in 5 Corporations of Kerala; namely Thiruvananthapuram, Kollam, Kochi, Thrissur and Kozhikode. From selected 44 roads, 68 homogeneous sections were studied. The data collected on the functional and structural condition of the surface include pavement distress in terms of cracks, potholes, rutting, raveling and pothole patching. The structural strength of the pavement was measured as rebound deflection using Benkelman Beam deflection studies. In order to collect the details of the pavement layers and find out the subgrade soil properties, trial pits were dug and the in-situ field density was found using the Sand Replacement Method. Laboratory investigations were carried out to find out the subgrade soil properties, soil classification, Atterberg limits, Optimum Moisture Content, Field Moisture Content and 4 days soaked CBR. The relative compaction in the field was also determined. The traffic details were also collected by conducting traffic volume count survey and axle load survey. From the data thus collected, the strength of the pavement was calculated which is a function of the layer coefficient and thickness and is represented as Structural Number (SN). This was further related to the CBR value of the soil and the Modified Structural Number (MSN) was found out. The condition of the pavement was represented in terms of the Pavement Condition Index (PCI) which is a function of the distress of the surface at the time of the investigation and calculated in the present study using deduct value method developed by U S Army Corps of Engineers. The influence of subgrade soil type and pavement condition on the relationship between MSN and rebound deflection was studied using appropriate plots for predominant types of soil and for classified value of Pavement Condition Index. The relationship will be helpful for practicing engineers to design the overlay thickness required for the pavement, without conducting the BBD test. Regression analysis using SPSS was done with various trials to find out the best fit relationship between the rebound deflection and CBR, and other soil properties for Gravel, Sand, Silt & Clay fractions. The second part of the study deals with periodic performance evaluation of selected road stretches representing National Highway (NH), State Highway (SH) and Major District Road (MDR), located in different geographical conditions and with varying traffic. 8 road sections divided into 15 homogeneous sections were selected for the study and 6 sets of continuous periodic data were collected. The periodic data collected include the functional and structural condition in terms of distress (pothole, pothole patch, cracks, rutting and raveling), skid resistance using a portable skid resistance pendulum, surface unevenness using Bump Integrator, texture depth using sand patch method and rebound deflection using Benkelman Beam. Baseline data of the study stretches were collected as one time data. Pavement history was obtained as secondary data. Pavement drainage characteristics were collected in terms of camber or cross slope using camber board (slope meter) for the carriage way and shoulders, availability of longitudinal side drain, presence of valley, terrain condition, soil moisture content, water table data, High Flood Level, rainfall data, land use and cross slope of the adjoining land. These data were used for finding out the drainage condition of the study stretches. Traffic studies were conducted, including classified volume count and axle load studies. From the field data thus collected, the progression of each parameter was plotted for all the study roads; and validated for their accuracy. Structural Number (SN) and Modified Structural Number (MSN) were calculated for the study stretches. Progression of the deflection, distress, unevenness, skid resistance and macro texture of the study roads were evaluated. Since the deterioration of the pavement is a complex phenomena contributed by all the above factors, pavement deterioration models were developed as non linear regression models, using SPSS with the periodic data collected for all the above road stretches. General models were developed for cracking progression, raveling progression, pothole progression and roughness progression using SPSS. A model for construction quality was also developed. Calibration of HDM–4 pavement deterioration models for local conditions was done using the data for Cracking, Raveling, Pothole and Roughness. Validation was done using the data collected in 2013. The application of HDM-4 to compare different maintenance and rehabilitation options were studied considering the deterioration parameters like cracking, pothole and raveling. The alternatives considered for analysis were base alternative with crack sealing and patching, overlay with 40 mm BC using ordinary bitumen, overlay with 40 mm BC using Natural Rubber Modified Bitumen and an overlay of Ultra Thin White Topping. Economic analysis of these options was done considering the Life Cycle Cost (LCC). The average speed that can be obtained by applying these options were also compared. The results were in favour of Ultra Thin White Topping over flexible pavements. Hence, Design Charts were also plotted for estimation of maximum wheel load stresses for different slab thickness under different soil conditions. The design charts showed the maximum stress for a particular slab thickness and different soil conditions incorporating different k values. These charts can be handy for a design engineer. Fuzzy rule based models developed for site specific conditions were compared with regression models developed using SPSS. The Riding Comfort Index (RCI) was calculated and correlated with unevenness to develop a relationship. Relationships were developed between Skid Number and Macro Texture of the pavement. The effort made through this research work will be helpful to highway engineers in understanding the behaviour of flexible pavements in Kerala conditions and for arriving at suitable maintenance and rehabilitation strategies. Key Words: Flexible Pavements – Performance Evaluation – Urban Roads – NH – SH and other roads – Performance Models – Deflection – Riding Comfort Index – Skid Resistance – Texture Depth – Unevenness – Ultra Thin White Topping

Conceptual knowledge processing with formal concept analysis and ontologies

Among many other knowledge representations formalisms, Ontologies and Formal Concept Analysis (FCA) aim at modeling ‘concepts’. We discuss how these two formalisms may complement another from an application point of view. In particular, we will see how FCA can be used to support Ontology Engineering, and how ontologies can be exploited in FCA applications. The interplay of FCA and ontologies is studied along the life cycle of an ontology: (i) FCA can support the building of the ontology as a learning technique. (ii) The established ontology can be analyzed and navigated by using techniques of FCA. (iii) Last but not least, the ontology may be used to improve an FCA application.

Veränderungen im Öko-Lebensmittelkonsum in Familien mit Kindern und deren Hintergründe

Im Rahmen der Arbeit wird den Fragen nachgegangen, inwiefern der Konsum von Öko-Lebensmitteln in Familien mit Kindern im zeitlichen Verlauf Veränderungen unterliegt und worin Veränderungen im Öko-Lebensmittelkonsum in Familien mit Kindern begründet sind. Aus den hierzu gewonnenen Erkenntnissen werden Schlussfolgerungen für die Konsumentenforschung und das Marketing von Öko-Produkten gezogen. Theoretische Grundlage stellen der Familienzyklus sowie Forschungsergebnisse zum Konsumentenverhalten in Familien und zum Konsum von Öko-Lebensmitteln in Familien dar. Für die empirische Bearbeitung der Forschungsfragen wurde ein qualitatives Forschungsdesign gewählt. Der Forschungsprozess gliederte sich in drei Wellen der Datenerhebung und -auswertung. Im Rahmen dessen wurden Eltern mithilfe problemzentrierter Interviews zur Entwicklung des Öko-Konsums in ihren Familien befragt. Die Interviews wurden computergestützt und in Anlehnung an die Kodierprozeduren offenes und axiales Kodieren der Grounded Theory ausgewertet. Ergebnis der Datenanalyse sind drei Zusammenhangsmodelle, die zu einer Erklärung von Veränderungen im Öko-Lebensmittelkonsum von Familien beitragen. Veränderungen können demnach erstens in einer Erhöhung der Konsumintensität während einer Schwangerschaft bestehen. Als Bedingungen hierfür konnten ein verstärktes Bewusstsein für Öko-Produkte, die körperliche Konstitution der Mutter sowie die Unterstützung durch die soziale Umwelt identifiziert werden. Weitere Bedingungen stellen Lebensmittelskandale sowie eine gute Verfügbarkeit von Öko-Produkten dar. Handlungsstrategien der Eltern beziehen sich auf das Wohlergehen des noch ungeborenen Kindes (Förderung der Gesundheit, Erhalten der zukünftigen Lebenswelt, Orientierung für die spätere Ernährung des Kindes) sowie auf das Wohlergehen der werdenden Mutter (Förderung der Gesundheit, Förderung des Wohlbefindens, Umgang mit schwangerschaftsbedingten Beschwerden). Zweitens können Veränderungen des Öko-Lebensmittelkonsums in einer Erhöhung der Konsumintensität ab dem Zeitpunkt der Umstellung der Ernährung eines Kindes auf eine Beikosternährung bestehen. Bedingungen hierfür sind eine verstärkte Beachtung von Öko-Produkten, die körperliche Konstitution des Kindes, die Abstimmung von Familien- und Baby-Kost, der Austausch mit und die Unterstützung durch die soziale Umwelt sowie der Wunsch von Eltern, einen Beitrag zum Öko-Landbau zu liefern. Bedingungen können außerdem eine gute Verfügbarkeit von Öko-Produkten sowie der Einfluss von Medien darstellen. Handlungsstrategien der Eltern beziehen sich auf die Ernährung des Kindes (Förderung der Gesundheit, Förderung der Geschmackssozialisation) und auf die Ernährung der restlichen Familie (effiziente Beschaffung und Verwendung von Lebensmitteln, Förderung des Wohlbefindens der Eltern). Drittens können Veränderungen im Öko-Lebensmittelkonsum in Familien in einem Rückgang der Konsumintensität während des Übergangs von Kindern ins Jugendalter bestehen. Bedingungen hierfür bestehen in der Konsequenz, mit der Eltern konventionellen Lebensmittelwünschen ihrer Kinder nachgeben, in der Beurteilung von Lebensmitteln durch die Eltern sowie in der Intensität, mit der Kinder ihre Wünsche einfordern. Handlungsstrategien der Eltern sind darauf ausgerichtet Kindern einen Wunsch zu erfüllen, sich gegenüber diesen liberal zu verhalten, Konflikte mit Kindern zu vermeiden oder diese ihre eigenen Erfahrungen sammeln zu lassen. Die Ergebnisse tragen zu einer theoretischen Fundierung des Zusammenhangs zwischen Familienzyklus und dem Öko-Lebensmittelkonsum in Familien bei und zeigen, dass dieser ein sinnvolles theoretisches Bezugssystem für Veränderungen der Konsumintensität von Öko-Produkten darstellt. Für die Konsumentenforschung tragen die Ergebnisse zu einem differenzierten Verständnis von Ober- und Untergrenzen von Familienzyklusstadien bei. Es zeigt sich weiterhin, dass Veränderungen des Öko-Konsums unter anderem unter dem Einfluss der sozialen Umwelt stehen. Im Hinblick auf das Marketing kann insbesondere geschlussfolgert werden, dass bei bestimmten Produktkategorien die Bedürfnisse jugendlicher Zielgruppen verstärkt berücksichtigt werden sollten. Zur Bindung junger Familien ist darauf hinzuwirken, einen Mehraufwand bei der Beschaffung von Öko-Produkten auszuschließen. Für die Ansprache der Zielgruppe Schwangere erscheinen Kommunikationsbotschaften geeignet, die sich auf das Wohlbefinden von Kind und Mutter und auf Nachhaltigkeitsaspekte beziehen. Eltern mit Kindern im Übergang zu einer Beikosternährung könnten gezielt durch Kommunikationsbotschaften angesprochen werden, die in Zusammenhang mit der Förderung der Gesundheit und der Geschmacksozialisation von Kindern stehen.

Modeling the interplay between land use, bioenergy production and climate change

Land use has become a force of global importance, considering that 34% of the Earth’s ice-free surface was covered by croplands or pastures in 2000. The expected increase in global human population together with eminent climate change and associated search for energy sources other than fossil fuels can, through land-use and land-cover changes (LUCC), increase the pressure on nature’s resources, further degrade ecosystem services, and disrupt other planetary systems of key importance to humanity. This thesis presents four modeling studies on the interplay between LUCC, increased production of biofuels and climate change in four selected world regions. In the first study case two new crop types (sugarcane and jatropha) are parameterized in the LPJ for managed Lands dynamic global vegetation model for calculation of their potential productivity. Country-wide spatial variation in the yields of sugarcane and jatropha incurs into substantially different land requirements to meet the biofuel production targets for 2015 in Brazil and India, depending on the location of plantations. Particularly the average land requirements for jatropha in India are considerably higher than previously estimated. These findings indicate that crop zoning is important to avoid excessive LUCC. In the second study case the LandSHIFT model of land-use and land-cover changes is combined with life cycle assessments to investigate the occurrence and extent of biofuel-driven indirect land-use changes (ILUC) in Brazil by 2020. The results show that Brazilian biofuels can indeed cause considerable ILUC, especially by pushing the rangeland frontier into the Amazonian forests. The carbon debt caused by such ILUC would result in no carbon savings (from using plant-based ethanol and biodiesel instead of fossil fuels) before 44 years for sugarcane ethanol and 246 years for soybean biodiesel. The intensification of livestock grazing could avoid such ILUC. We argue that such an intensification of livestock should be supported by the Brazilian biofuel sector, based on the sector’s own interest in minimizing carbon emissions. In the third study there is the development of a new method for crop allocation in LandSHIFT, as influenced by the occurrence and capacity of specific infrastructure units. The method is exemplarily applied in a first assessment of the potential availability of land for biogas production in Germany. The results indicate that Germany has enough land to fulfill virtually all (90 to 98%) its current biogas plant capacity with only cultivated feedstocks. Biogas plants located in South and Southwestern (North and Northeastern) Germany might face more (less) difficulties to fulfill their capacities with cultivated feedstocks, considering that feedstock transport distance to plants is a crucial issue for biogas production. In the fourth study an adapted version of LandSHIFT is used to assess the impacts of contrasting scenarios of climate change and conservation targets on land use in the Brazilian Amazon. Model results show that severe climate change in some regions by 2050 can shift the deforestation frontier to areas that would experience low levels of human intervention under mild climate change (such as the western Amazon forests or parts of the Cerrado savannas). Halting deforestation of the Amazon and of the Brazilian Cerrado would require either a reduction in the production of meat or an intensification of livestock grazing in the region. Such findings point out the need for an integrated/multicisciplinary plan for adaptation to climate change in the Amazon. The overall conclusions of this thesis are that (i) biofuels must be analyzed and planned carefully in order to effectively reduce carbon emissions; (ii) climate change can have considerable impacts on the location and extent of LUCC; and (iii) intensification of grazing livestock represents a promising venue for minimizing the impacts of future land-use and land-cover changes in Brazil.

New Architectural Models for Visibly Controllable Computing: The Relevance of Dynamic Object Oriented Architectures and Plan Based Computing Models

Traditionally, we've focussed on the question of how to make a system easy to code the first time, or perhaps on how to ease the system's continued evolution. But if we look at life cycle costs, then we must conclude that the important question is how to make a system easy to operate. To do this we need to make it easy for the operators to see what's going on and to then manipulate the system so that it does what it is supposed to. This is a radically different criterion for success. What makes a computer system visible and controllable? This is a difficult question, but it's clear that today's modern operating systems with nearly 50 million source lines of code are neither. Strikingly, the MIT Lisp Machine and its commercial successors provided almost the same functionality as today's mainstream sytsems, but with only 1 Million lines of code. This paper is a retrospective examination of the features of the Lisp Machine hardware and software system. Our key claim is that by building the Object Abstraction into the lowest tiers of the system, great synergy and clarity were obtained. It is our hope that this is a lesson that can impact tomorrow's designs. We also speculate on how the spirit of the Lisp Machine could be extended to include a comprehensive access control model and how new layers of abstraction could further enrich this model.

Anàlisi del Cicle de Vida (ACV) del Monoestearat de Glicerina a CRODA Ibérica, S.A. – Mevisa Site

L’estudi de l’Anàlisi del Cicle de Vida (ACV) ha estat realitzat a l’empresa CRODA Ibèrica S.A - Mevisa Site, en concret a la línia productiva on s’hi fabrica el monoestearat de glicerina utilitzant una eina informàtica comercial denominada SIMAPRO que analitza i compara els aspectes mediambientals d’un producte d’una manera sistemàtica i consistent seguint les recomanacions de les normes ISO 14040

The International Student Experience at the University of Southampton

This video highlights aspects of the lives of international students at UG, PGT and PGR levels from all 3 faculties. It shows them responding to a range of authentic scenarios about the experiences and challenges of being an international student at the University of Southampton in the early 21st century from their perspective. The overall objective of this short film therefore is to capture experiences and viewpoints of international students currently at the University. By viewing this video, it is hoped that staff will be able to gain a better understanding and appreciation of what their international students are feeling and facing at various points along their student life cycle.

Análisis de los procesos de internacionalización en el sector petrolero : Ecopetrol, Petrobras Y Exxonmobil

El presente trabajo se centra en el fenómeno de la internacionalización dentro del sector petrolero. Para esto, se escogió a tres empresas: Ecopetrol, por ser la empresa colombiana más grande; Petrobras, el mayor representante de Latinoamérica; y Exxon Mobil, un gigante del petróleo a nivel mundial. Estas empresas, que se encuentran en diferentes etapas dentro de su proceso de la internacionalización, muestran comportamientos estratégicos similares. Son precisamente estas similitudes las que permitieron proponer un modelo de internacionalización generalizado para las diferentes empresas que componen dicho sector económico. Para alcanzar dicho modelo, se recurrió a diferentes teorías de internacionalización desarrolladas por varias escuelas de negocios en el mundo, tales como el Modelo Ecléctico, el de Uppsala o la Teoría de Redes. Cabe destacar que dicho modelo propuesto es una aproximación teórica a la realidad empresarial de las compañías petroleras, usando como marco de referencia una muestra pequeña de este tipo de organizaciones. Dentro de este modelo, los altos matices de complejidad propios del fenómeno de la internacionalización se ven reducidos de manera considerable, como parte del ejercicio académico propuesto en el presente estudio.