Application of multivariate statistical process control to fuel cell manufacturing

Univariate statistical control charts, such as the Shewhart chart, do not satisfy the requirements for process monitoring on a high volume automated fuel cell manufacturing line. This is because of the number of variables that require monitoring. The risk of elevated false alarms, due to the nature of the process being high volume, can present problems if univariate methods are used. Multivariate statistical methods are discussed as an alternative for process monitoring and control. The research presented is conducted on a manufacturing line which evaluates the performance of a fuel cell. It has three stages of production assembly that contribute to the final end product performance. The product performance is assessed by power and energy measurements, taken at various time points throughout the discharge testing of the fuel cell. The literature review performed on these multivariate techniques are evaluated using individual and batch observations. Modern techniques using multivariate control charts on Hotellings T2 are compared to other multivariate methods, such as Principal Components Analysis (PCA). The latter, PCA, was identified as the most suitable method. Control charts such as, scores, T2 and DModX charts, are constructed from the PCA model. Diagnostic procedures, using Contribution plots, for out of control points that are detected using these control charts, are also discussed. These plots enable the investigator to perform root cause analysis. Multivariate batch techniques are compared to individual observations typically seen on continuous processes. Recommendations, for the introduction of multivariate techniques that would be appropriate for most high volume processes, are also covered.

Development of a semi-automatic self learning pattern recognition system for the control of electronic boards

This project was funded under the Applied Research Grants Scheme administered by Enterprise Ireland. The project was a partnership between Galway - Mayo Institute of Technology and an industrial company, Tyco/Mallinckrodt Galway. The project aimed to develop a semi - automatic, self - learning pattern recognition system capable of detecting defects on the printed circuits boards such as component vacancy, component misalignment, component orientation, component error, and component weld. The research was conducted in three directions: image acquisition, image filtering/recognition and software development. Image acquisition studied the process of forming and digitizing images and some fundamental aspects regarding the human visual perception. The importance of choosing the right camera and illumination system for a certain type of problem has been highlighted. Probably the most important step towards image recognition is image filtering, The filters are used to correct and enhance images in order to prepare them for recognition. Convolution, histogram equalisation, filters based on Boolean mathematics, noise reduction, edge detection, geometrical filters, cross-correlation filters and image compression are some examples of the filters that have been studied and successfully implemented in the software application. The software application developed during the research is customized in order to meet the requirements of the industrial partner. The application is able to analyze pictures, perform the filtering, build libraries, process images and generate log files. It incorporates most of the filters studied and together with the illumination system and the camera it provides a fully integrated framework able to analyze defects on printed circuit boards.

Studies of the development and larval forms of echinoderms, by Dr. Th. Mortensen.

c. 3

Nonlinear analysis and control of PEM fuel cells

Magdeburg, Univ., Fak. für Elektrotechnik und Informationstechnik, Diss., 2010

Financial structure choice in owner-managed firms : entrepreneurial characteristics, utility of control, and the competitive context

Magdeburg, Univ., Fak. für Wirtschaftswiss., Diss., 2011

Synthesis of plantwide control strategies using mixed integer optimization

Magdeburg, Univ., Fak. für Elektrotechnik und Informationstechnik, Diss., 2012

Blood Pressure Control in Hypertensive Patients in the "Hiperdia Program": A Territory-Based Study

Background:Systemic hypertension is highly prevalent and an important risk factor for cardiovascular events. Blood pressure control in hypertensive patients enrolled in the Hiperdia Program, a program of the Single Health System for the follow-up and monitoring of hypertensive patients, is still far below the desired level.Objective:To describe the epidemiological profile and to assess blood pressure control of patients enrolled in Hiperdia, in the city of Novo Hamburgo (State of Rio Grande do Sul, Brazil).Methods:Cross-sectional study with a stratified cluster random sample, including 383 adults enrolled in the Hiperdia Program of the 15 Basic Health Units of the city of Porto Alegre, conducted between 2010 and 2011. Controlled blood pressure was defined as ≤140 mmHg × 90 mmHg. The hypertensive patients were interviewed and their blood pressure was measured using a calibrated aneroid device. Prevalence ratios (PR) with 95% confidence interval, Wald's χ2 test, and simple and multiple Poisson regression were used in the statistical analysis.Results:The mean age was 63 ± 10 years, and most of the patients were females belonging to social class C, with a low level of education, a sedentary lifestyle, and family history positive for systemic hypertension. Diabetes mellitus (DM) was observed in 31%; adherence to the antihypertensive treatment in 54.3%; and 33.7% had their blood pressure controlled. DM was strongly associated with inadequate BP control, with only 15.7% of the diabetics showing BP considered as controlled.Conclusion:Even for hypertensive patients enrolled in the Hiperdia Program, BP control is not satisfactorily reached or sustained. Diabetic hypertensive patients show the most inappropriate BP control.

C allele of the IL-1B-511 SNP is associated with higher risk for Gastric Cancer and its premalignant lesion : a prospective case-control study in Peru

Magdeburg, Univ., Medizin. Fakultät, Diss., 2008

Stochastic effects and uncertainties in assessing electromagnetic interactions with control systems

Electromagnetic compatibility, lightning, crosstalk surge voltages, Monte Carlo simulation, accident initiator

Control of spiral wave dynamics by feedback mechanism via a triangular sensory domain

Spiral wave,feedback mechanism, photosensitive BZ reaction, excitable media, drift vetor field plot, planewave approximation, BZ, nonlinear

Non-linear model reduction and control of molten carbonate fuel cell systems with internal reforming fuel cell systems with internal reforming

Magdeburg, Univ., Diss, 2007

Synergistic inflammatory signaling in airway epithelial cells : control of expression levels of protease activated receptors and interleukin-8 release

Protease-activated receptor, interleukin, thrombin, trypsin, asthma

On design and control of simulated moving bed plants

Magdeburg, Univ., Fak. für Elektrotechnik und Informationstechnik, Diss., 2010

Biologia da Arsenura xanthopus (Walker, 1855) ( Lepidoptera - Adelocephalidae ), praga do «Açoita-Cavalo» (Luehea spp.) e notas sôbre seus inimigos naturais

Biology of Arsenura xanthopus (Walker, 1855) (Lep., Adelocephalidae), a pest of Luehea spp. (Tiliaceae), and notes on its natural enemies. In the beginning of 1950, one of the Authors made some observations about the biology of Arsenura xanthopus (Walker), in Piracicaba, State of S. Paulo, Brazil. From 1951 to 1953, both Authors continued the observations on such an important Adelocephalidae, the caterpillars of which represent a serious pest of Luehea spp. leaves. Actually, in some occasions, the caterpillars can destroy completely the leaves of the trees. The species is efficientely controlled by two natural enemies: an egg parasite (Tetrastichus sp., Hym., Eulophidae) and a fly attacking the last instar caterpillar (Winthemia tricolor (van der Wulp), Dip., Tachinidae). Tetrastichus sp. can destroy 100% of the eggs and the fly, 70 to 100% of the caterpillars. Indeed, facts as such are very interesting because we rarely know of a case of so complete a control of a pest by an insect. A. xanthopus had not yet been mentioned in our literature. Actually neither the systematic bibliography nor the economic one has treated of this species. However, a few other species of Arsenura are already known as living on Luehea spp. According to the Authors' observations, W. tricolor was also unknown by the Brazilian entomological literature. Arsenura xanthopus (Walker, 1855) After giving the sinonimy and a few historical data concerning the species, and its geographical distribution, the Authors discuss its placing in the genus Arsenura Duncan or Rhescyntis Huebner, finishing by considering Arsenura xanthopus as a valid name. The Authors put the species in the family Adelocephalidae, as it has been made by several entomologists. The host plant The species of Tiliaceae plants belonging to the genus Luehea are called "açoita-cavalo" and are well known for the usefulness of their largely utilized wood. The genus comprises exclusively American plants, including about 25 species distributed throughout the Latin America. Luehea divaricata Mart, is the best known species and the most commonly cultivated. Biology of Arsenura xanthopus Our observations show that the species passes by 6 larval stages. Eggs and egg-postures, all the 6 instars of the caterpillars as well as the chrysalid are described. The pupal period is the longest of the cycle, taking from 146 to 256 days. Data on the eclosion and habits of the caterpillars are also presented. A redescription of the adult is also given. Our specimens agreed with BOUVIER's description, except in the dimension between the extremities of the extended wings, which is a little shorter (107 mm according to BOUVlErVs paper against from 80 to 100mm in our individuals). Winthemia tricolor (van der Wulp, 1890) Historical data, geographical distribution and host are first related. W. tricolor had as yet a single known host-; Ar^-senura armida (Cramer). This chapter also contains some observations on the biolcn gy of the fly and on its behaviour when trying to lay eggs on the caterpillars' skin. The female of W. tricolor lays from 1 to 33 eggs on the skin of the last instar caterpillar. The mam region of the body where the eggs are laid are the membranous legs. Eggs are also very numerous oh the ventral surface of the thorax and abdomen. The. preference for such regions is easily cleared up considering the position assumed by the caterpillar when fixed motionless in a branch. In such an occasion, the fly approaches, the victim, puts the ovipositor out and lays the eggs on different parts of the body, mainly on the mentioned regions, which are much more easily reached. The eggs of the fly are firmly attached to the host's skin, being almost impossible to detach them, without having them broken. The minute larvae of the fly enter the body of, the host when it transforms into chrysalid. Chrysalids recentely formed and collected in nature f requentely show a few small larvae walking on its skin and looking for an adequate place to get into the body. A few larvae die by remaining in the skin of the caterpillar which is pushed away to some distance by the active movements of the chrysalid recentely formed. From 1 to 10 larvae completely grown may emerge from the attacked chrysalid about 8 days after their penetrating into the caterpillars' body and soon begin to look for an adequate substratum where they can transform themselves into pupae. In natural conditions, the metamorphosis occurs in the soil. The flies appear within 15 days. Tetrastichus sp. This microhymenoptera is economically the most interesting parasite, being commonly able to destroy the whole pos^ ture of the moth. Indeed, some days after the beginning of the infestation of the trees, it is almost impossible to obtain postures completely free of parasites. The active wasp introduces the ovipositor into the egg of the moth, laying its egg inside, from 80 to 120 seconds after having introduced it. A single adult wasp emerges from each egg. Sarcophaga lambens Wiedemann, 1830 During the observations carried out, the Authors obtained 10 flies from a chysalid that were recognized as belonging to the species above. S. lambens is a widely distributed Sarcophagidae, having a long list of hosts. It is commonly obtained from weak or died invertebrates, having no importance as one of their natural enemies. Sinonimy, list of hosts and distribution are presented in this paper. Control of Arsenura xanthopus A test has been carefully made in the laboratory just to find out the best insecticide for controlling A. xanthopus caterpillars. Four different products were experimented (DDT, Pa-rathion, BHC and Fenatox), the best results having been obtained with DDT at 0,25%. However, the Authors believe in spite of the initial damages of the trees, that the application of an insecticide may be harmful by destroying the natural agents of control. A biological desiquilibrium may in this way take place. The introduction of the parasites studied (Tetrastichus sp. and Winthemia tricolor) seems to be the most desirable measure to fight A. xanthopus.

Control of fluidized bed spray granulation processes

Magdeburg, Univ., Fak. für Elektrotechnik und Informationstechnik, Diss., 2012