Treatment of cancer with oral drugs: a position statement by the Spanish Society of Medical Oncology

Cancer treatment involves the participation of multiple medical specialties and, as our knowledge of the disease increases, this fact becomes even more apparent. The degree of multidisciplinarity is determined by several factors, which include the severity and type of disease, the increasing diversity in the available pharmacological and non-pharmacological therapies, and the range of specialists involved in cancer therapy, such as medical oncologists, radiotherapists, gynecologists, gastroenterologists, urologists, surgeons, and pneumologists, among others. Across Europe, the situation of cancer care can be variable due to the diversity of health systems, differences in drug reimbursement, and the degree of establishment of Medical Oncology as a medical specialty in the European Union states.

Impact of the Femoral Head Position on Moment Arms in Total Hip Arthroplasty: A Parametric Finite Element Study.

BACKGROUND: Although the importance of accurate femoral reconstruction to achieve a good functional outcome is well documented, quantitative data on the effects of a displacement of the femoral center of rotation on moment arms are scarce. The purpose of this study was to calculate moment arms after nonanatomical femoral reconstruction. METHODS: Finite element models of 15 patients including the pelvis, the femur, and the gluteal muscles were developed. Moment arms were calculated within the native anatomy and compared to distinct displacement of the femoral center of rotation (leg lengthening of 10 mm, loss of femoral offset of 20%, anteversion ±10°, and fixed anteversion at 15°). Calculations were performed within the range of motion observed during a normal gait cycle. RESULTS: Although with all evaluated displacements of the femoral center of rotation, the abductor moment arm remained positive, some fibers initially contributing to extension became antagonists (flexors) and vice versa. A loss of 20% of femoral offset led to an average decrease of 15% of abductor moment. Femoral lengthening and changes in femoral anteversion (±10°, fixed at 15°) led to minimal changes in abductor moment arms (maximum change of 5%). Native femoral anteversion correlated with the changes in moment arms induced by the 5 variations of reconstruction. CONCLUSION: Accurate reconstruction of offset is important to maintaining abductor moment arms, while changes of femoral rotation had minimal effects. Patients with larger native femoral anteversion appear to be more susceptible to femoral head displacements.

Determination of Rod and Cone Influence to the Early and Late Dynamic of the Pupillary Light Response.

PURPOSE: This study aims to identify which aspects of the pupil light reflex are most influenced by rods and cones independently by analyzing pupil recordings from different mouse models of photoreceptor deficiency. METHODS: One-month-old wild type (WT), rodless (Rho-/-), coneless (Cnga3-/-), or photoreceptor less (Cnga3-/-; Rho-/- or Gnat1-/-) mice were subjected to brief red and blue light stimuli of increasing intensity. To describe the initial dynamic response to light, the maximal pupillary constriction amplitudes and the derivative curve of the first 3 seconds were determined. To estimate the postillumination phase, the constriction amplitude at 9.5 seconds after light termination was related to the maximal constriction amplitude. RESULTS: Rho-/- mice showed decreased constriction amplitude but more prolonged pupilloconstriction to all blue and red light stimuli compared to wild type mice. Cnga3-/- mice had constriction amplitudes similar to WT however following maximal constriction, the early and rapid dilation to low intensity blue light was decreased. To high intensity blue light, the Cnga3-/- mice demonstrated marked prolongation of the pupillary constriction. Cnga3-/-; Rho-/- mice had no pupil response to red light of low and medium intensity. CONCLUSIONS: From specific gene defective mouse models which selectively voided the rod or cone function, we determined that mouse rod photoreceptors are highly contributing to the pupil response to blue light stimuli but also to low and medium red stimuli. We also observed that cone cells mainly drive the partial rapid dilation of the initial response to low blue light stimuli. Thus photoreceptor dysfunction can be derived from chromatic pupillometry in mouse models.

Troca iônica no estado sólido de európio3+ em zeólita Y: influência do tempo de reação

Rare earth elements supported in zeolites are the most important catalysts in the fluid cracking of petroleum. The solid state ion exchange of Eu3+ in Y zeolite was investigated. First of all, the hydrated EuCl3 was well mixed in a ball mill and was then heated at 300ºC for different times. The quantitative determination of Eu3+ showed that the degree of ion exchange depends on the reaction time at constant temperature, being ~95% in 4 h. The X-ray study showed that the crystallinity of the zeolite is little affected by the exchange procedure. The study of spectroscopic properties of Eu3+, emission spectra and lifetime, give information about the migration and position of the ion in the zeolite cages.

Study of linkage between miniature and singed genes in Drosophila melanogaster

We have developed a practical exercise for undergraduate students whose main aim is to identify, using genetic crosses, a pair of D. melanogaster mutations (miniature and singed). Each student receives a vial with the problem strain containing two unknown mutations. The first step is to observe and describe both mutations. Then, the students carry out genetic crosses between mutant and normal strains: (P) ♀ mutant strain × ♂ normal strain (P) ♀ normal strain × ♂ mutant strain A different offspring is expected in these crosses: in the first one we will obtain normal females and m sn males, whereas in the second all individuals will present normal phenotype. It is possible to deduce that both are sex linked mutations. With this information and to simplify the amount of work, only F1 individuals from the first cross will be used (m+sn+ / m sn × m sn / Y chrom.) to obtain the F2 generation. By counting the number of miniature (recombinant type), singed (recombinant type), miniature-singed (parental type) and normal (parental type) flies it is possible to estimate the recombination frequency between both genes. Knowing the phenotype, their chromosomal location (X chromosome) and the genetic distance between both mutations, it is possible to identify them by finding all this information in a Drosophila melanogaster genetic map. Additionally, a statistical analysis can be carried out to compare the number of expected F2 individuals with those observed in the experiment. As the distance between both genes is 15.1 m.u., then the expected percentages for each phenotype would be: normal (42.45%), miniature-signed (42.45%), miniature (7.55%) and singed (7.55%). Multiplying the frequency of each class by the total number of individuals obtained in the F2 it is possible to estimate the expected number of flies for each class. Finally, a χ2 test can be computed to ascertain whether there are significant differences between expected and observed number of individuals.

X-ray fluorescence determination of adsorbed copper on activated charcoal after glycerin complexation

X-This work shows an alternative method to copper determination by X-Ray Fluorescence (XRF). Since copper concentration in natural waters is not enough to reach XRF detection limit, a liquid-solid preconcentration procedure was proposed. Glycerin was used to complex the metal increasing its adsorption on activated charcoal. The solid phase was used to XRF determination. Several parameters were evaluated, such as, the complexation pH, the charcoal adsorption limit and the glycerin concentration. The interferences are lead and bismuth and the sensitivities decreased in the order Cu2+, Bi3+ and Pb2+. The advantages of the method are its simplicity, low cost and low spectral interference.

Feather mercury levels in seabirds at South Georgia: Influences of trophic position, sex and age

We studied the mercury contamination of 13 species of seabirds breeding on Bird Island, South Georgia, in 1998. Total mercury concentrations in body feather samples of birds caught at their breeding colonies were determined. Among the species, grey-headed albatross (8933 ng g-1) and southern giant petrel (7774 ng g-1) showed the highest, and gentoo penguin (948 ng g-1) the lowest body feather mercury concentrations. Mercury levels were negatively correlated with the proportion of crustaceans (mainly krill) in the species¹ diets, suggesting that the trophic level is the most important factor in explaining the variation of mercury concentrations in Antarctic seabirds. In 4 species studied for age effects among adult birds (grey-headed and black-browed albatross, northern and southern giant petrel), no age-dependent variation in mercury levels was found. Sex differences were also assessed: female gentoo penguins had lower mercury levels than males, which may be related to the elimination of part of the mercury body burden by females into eggs. In contrast, northern giant petrel males had lower levels than females, which may be related to a higher consumption by males of carrion from Antarctic fur seals. In grey-headed albatrosses, mercury levels were 113% higher than in 1989, when this species was investigated at the same site, indicating a possible increase in mercury pollution of the Southern Ocean during the last decade.

Determination of compression behaviour of coating layer

The strength properties of paper coating layer are very important in converting and printing operations. Too great or low strength of the coating can affect several problems in printing. One of the problems caused by the strength of coating is the cracking at the fold. After printing the paper is folded to final form and the pages are stapled together. In folding the paper coating can crack causing aesthetic damage over printed image or in the worst case the centre sheet can fall off in stapling. When folding the paper other side undergoes tensile stresses and the other side compressive stresses. If the difference between these stresses is too high, the coating can crack on the folding. To better predict and prevent cracking at the fold it is good to know the strength properties of coating layer. It has measured earlier the tensile strength of coating layer but not the compressive strength. In this study it was tried to find some way to measure the compressive strength of the coating layer and investigate how different coatings behave in compression. It was used the short span crush test, which is used to measure the in-plane compressive strength of paperboards, to measure the compressive strength of the coating layer. In this method the free span of the specimen is very small which prevent buckling. It was measured the compressive strength of free coating films as well as coated paper. It was also measured the tensile strength and the Bendtsen air permeance of the coating film. The results showed that the shape of pigment has a great effect to the strength of coating. Platy pigment gave much better strength than round or needle-like pigment. On the other hand calcined kaolin, which is also platy but the particles are aggregated, decreased the strength substantially. The difference in the strength can be explained with packing of the particles which is affecting to the porosity and thus to the strength. The platy kaolin packs up much better than others and creates less porous structure. The results also showed that the binder properties have a great effect to the compressive strength of coating layer. The amount of latex and the glass transition temperature, Tg, affect to the strength. As the amount of latex is increasing, the strength of coating is increasing also. Larger amount of latex is binding the pigment particles better together and decreasing the porosity. Compressive strength was increasing when the Tg was increasing because the hard latex gives a stiffer and less elastic film than soft latex.

Supplier's position in project marketing networks

The present study explores relationships between project marketers and their customers in project marketing context. The purpose of the study is to increase the understanding on supplier’s position in project marketing networks. Project marketing is representing a high volume in the international business, and the industrial network approach and the project marketing research cannot fully explain a supplier’s position in project marketing networks. Increased knowledge on project networks can also contribute to industrial marketing research more generally. Data for the present study was collected firstly during the pilot case study from project buyers in the paper and the steel industry in interviews. Secondly an entire project marketing case concerning a steel industry case was used as a data source. The data included interviews, correspondence between the supplier and the buyer, and project documents. The data of the pilot case was analysed with contents analysis, and in the case a deeper analysis based on the developed Stage Dimension framework was used. Supplier’s position in project marketing networks is a hierarchical and dynamic concept including a supplier’s position on the highest level. The dimensions of the position concept are the intermediate level, and the dimensions are based on the underlying components. Supplier’s position is composed from four organization related dimensions, and two individual actor related dimensions. The composition of the supplier’s position varies during the project marketing process, and consequently the relative importance of the dimensions is changing over the process. Supplier’s position in project marketing networks is shaped by incremental and radical changes. Radical changes are initiated by critical events. The study contributes to the research of industrial networks and project marketing. The theoretical contribution of the study is threefold: firstly it proposes a structure of the position concept in project marketing networks, secondly it proposes the Position Stage Dimension Component (PSDC) model for the development of supplier’s position during the project marketing process, and thirdly the study widens the critical event concept to cover the project marketing process both on the organizational and individual level. In addition to the theoretical contributions there are several managerial implications for planning and implementing marketing strategies in the project context.

Comparison of three analytical methods for the determination of quinolones in pig muscle samples

This work presents a comparison between three analytical methods developed for the simultaneous determination of eight quinolones regulated by the European Union (marbofloxacin, ciprofloxacin, danofloxacin, enrofloxacin, difloxacin, sarafloxacin, oxolinic acid and flumequine) in pig muscle, using liquid chromatography with fluorescence detection (LC-FD), liquid chromatography-mass spectrometry (LC-MS) and liquid chromatography-tandem mass spectrometry (LC-MS/MS). The procedures involve an extraction of the quinolones from the tissues, a step for clean-up and preconcentration of the analytes by solid-phase extraction and a subsequent liquid chromatographic analysis. The limits of detection of the methods ranged from 0.1 to 2.1 ng g−1 using LC-FD, from 0.3 to 1.8 using LC-MS and from 0.2 to 0.3 using LC-MS/MS, while inter- and intra-day variability was under 15 % in all cases. Most of those data are notably lower than the maximum residue limits established by the European Union for quinolones in pig tissues. The methods have been applied for the determination of quinolones in six different commercial pig muscle samples purchased in different supermarkets located in the city of Granada (south-east Spain).

Spectrophotometric determination of cefaclor in pharmaceutical preparations

A simple spectrophotometric method is proposed for the determination of cefaclor. The method involves alkaline hydrolysis of the drug in ammonia buffer solution at pH 10 to yield diketopiperazine-2,5-dione derivative and subsequent measurement at 340 nm. Beer's law is obeyed in the concentration range 1.8 - 55 mg/mL. The proposed method was successfully applied to the determination of cefaclor in pharmaceutical formulations.

Electrical characteristics of eddy current position sensor

In the thesis the principle of work of eddy current position sensors and the main cautions that must be taken into account while sensor design process are explained. A way of automated eddy current position sensor electrical characteristics measurement is suggested. A prototype of the eddy current position sensor and its electrical characteristics are investigated. The results obtained by means of the automated measuring system are explained.

The determination of the stoichiometry of the mixed complex of vanadium with hydrogen peroxide and with 4-(2-Pyridilazo) Resorcinol

The present study reports details of the stoichiometric characterization of the mixed complex system, V(H2O2)PAR, formed when vanadium adequately reacts with hydrogen peroxide and with 4-(2-Pyridilazo)Resorcinol. Also the presence of polynuclear species was investigated in order to elucidate about unambiguous assignment of the molar absorptivity, stability constant and composition of the complex. Two mathematical treatments methods of the experimental results were employed. From the results it can be concluded that this system corresponds to a mononuclear complex with 1:1:1 stoichiometry.

Decay of linkage disequilibrium within genes across HGDP-CEPH human samples: most population isolates do not show increased LD

Background It is well known that the pattern of linkage disequilibrium varies between human populations, with remarkable geographical stratification. Indirect association studies routinely exploit linkage disequilibrium around genes, particularly in isolated populations where it is assumed to be higher. Here, we explore both the amount and the decay of linkage disequilibrium with physical distance along 211 gene regions, most of them related to complex diseases, across 39 HGDP-CEPH population samples, focusing particularly on the populations defined as isolates. Within each gene region and population we use r2 between all possible single nucleotide polymorphism (SNP) pairs as a measure of linkage disequilibrium and focus on the proportion of SNP pairs with r2 greater than 0.8. Results Although the average r2 was found to be significantly different both between and within continental regions, a much higher proportion of r2 variance could be attributed to differences between continental regions (2.8% vs. 0.5%, respectively). Similarly, while the proportion of SNP pairs with r2 > 0.8 was significantly different across continents for all distance classes, it was generally much more homogenous within continents, except in the case of Africa and the Americas. The only isolated populations with consistently higher LD in all distance classes with respect to their continent are the Kalash (Central South Asia) and the Surui (America). Moreover, isolated populations showed only slightly higher proportions of SNP pairs with r2 > 0.8 per gene region than non-isolated populations in the same continent. Thus, the number of SNPs in isolated populations that need to be genotyped may be only slightly less than in non-isolates. Conclusion The 'isolated population' label by itself does not guarantee a greater genotyping efficiency in association studies, and properties other than increased linkage disequilibrium may make these populations interesting in genetic epidemiology.

Prototypical Arthropod Gene Content and Genome Organisation in the Centipede Strigamia maritima

Myriapods (e.g., centipedes and millipedes) display a simple homonomous body plan relative to other arthropods. All members of the class are terrestrial, but they attained terrestriality independently of insects. Myriapoda is the only arthropod class not represented by a sequenced genome. We present an analysis of the genome of the centipede Strigamia maritima. It retains a compact genome that has undergone less gene loss and shuffling than previously sequenced arthropods, and many orthologues of genes conserved from the bilaterian ancestor that have been lost in insects. Our analysis locates many genes in conserved macro-synteny contexts, and many small-scale examples of gene clustering. We describe several examples where S. maritima shows different solutions from insects to similar problems. The insect olfactory receptor gene family is absent from S. maritima, and olfaction in air is likely effected by expansion of other receptor gene families. For some genes S. maritima has evolved paralogues to generate coding sequence diversity, where insects use alternate splicing. This is most striking for the Dscam gene, which in Drosophila generates more than 100,000 alternate splice forms, but in S. maritima is encoded by over 100 paralogues. We see an intriguing linkage between the absence of any known photosensory proteins in a blind organism and the additional absence of canonical circadian clock genes. The phylogenetic position of myriapods allows us to identify where in arthropod phylogeny several particular molecular mechanisms and traits emerged. For example, we conclude that juvenile hormone signalling evolved with the emergence of the exoskeleton in the arthropods and that RR-1 containing cuticle proteins evolved in the lineage leading to Mandibulata. We also identify when various gene expansions and losses occurred. The genome of S. maritima offers us a unique glimpse into the ancestral arthropod genome, while also displaying many adaptations to its specific life history.