Influência da vagotomia gástrica proximal sobre a zona de alta pressão esofagogástrica do cão.

The influence of parietal cell vagotomy (PCV) on esophagogastric high pressure zone (HPZ) (pressure and length) was studied in 30 dogs. The animals were divided in 3 groups: group 1, 10 dogs submitted to PCV with gastric denervation until the esophagogastric junction; group 2, 10 dogs submitted to PCV with gastric denervation into esophagogastric junction and 3 cm above this; group 3 (control), 10 dogs submitted to laparotomy only. In the postoperative period (immediate and later) it wasn't observed any alteration of pressure and length of esophagogastric HPZ in three studied groups.

Optical spectroscopy of Er3+ and Yb3+ co-doped fluoroindate glasses

Optical absorption, Stokes, and anti-Stokes photoluminescence were performed on Er3+-Yb3+ co-doped fluoroindate glasses. For compounds prepared with a fixed 2 mol % ErF3 concentration and YbF3 contents ranging from 0 to 8 mol %, important upconversion processes were observed as a function of temperature and photon excitation energy. Based on the experimental data, two mechanisms for the upconversion (or anti-Stokes photoluminescence) processes were identified and analyzed in detail. At high Yb contents, the upconversion mechanisms are mostly determined by the population of the 2F5/2 levels of Yb3+ ions (or 4I11/2 levels of Er3+ ions, by energy transfer) regardless of the photon excitation energy and temperature of measurement. Moreover, green and red light emission have similar intensities when a large Yb3+ content is present. © 1998 American Institute of Physics.

Diagnostic de securite d'une entreprise bresilienne a partir de l'analyse des accidents du travail par la methode de l'arbre des causes

We present here the results of a study of 21 work-related accidents that occurred in a Brazilian manufacturing company. The aim was to assess the safety level of the company to improve its work accident prevention policy. In the last 6 months of 1992 and 1993, all accidents resulting in 15 days' absence from work, reported for social security purposes, were analyzed using the INRS causal tree method (ADC) and a questionnaire completed on site. Potential risk factors for accidents were identified based on the specific factors highlighted by the ADC. More universal trees were also compiled for the safety assessment. Three hundred and thirty specific accident factors were recorded (man of 15.71 per accident). This is consistent with there being multiple causes of accidents rather than the assertion of Brazilian business safety departments that accidents are due to 'dangerous' or 'unsafe' behavior. Introducing the idea of culpability into accidents prevents the implementation of an appropriate information feedback process, essential for effective prevention. However, the large number of accidents related to 'material' (78%) and 'environment' (70%) indicates that working conditions are poor. This shows that the technical risks, mostly due to unsafe machinery and equipment are not being dealt with. Seventy-five potential accident factors were identified. Of these, 35% were 'organizational', a high proportion for the company studied. Improvisation occurs at all levels, particularly at the organizational level. This is, thus a major determinant for entire series of, if not most, accident situations. The poor condition of equipment also plays a major role in accidents. The effects of poor equipment on safety exacerbate the organizational shortcomings. The company's safety intervention policy should improve the management of human resources (rules designating particular workers for particular workstations; instructions for the safe operation of machines and equipment; training of operators, etc.) and introduce programs to detect risks and to improve the safety of machines and equipment. We also recommend the establishment of a program to follow the results of any preventive measures adopted.

Estudio de la pasivacion de la aleacion Co-Cr-Mo en suero fisiologico

Results are presented on the mechanism of passivation of Co-Cr-Mo biological implant alloys in physiological serum using open circuit potentiometry, potentiodynamic curves, and electrochemical impedance spectroscopy. The potential dependence of impedance data and the analysis of the parameters obtained indicate a progressive diminution of the initial layer thickness and the simultaneous formation of a second higher resistive layer. In more severe conditions than the existent in human body, the metallographic examination of the alloy surface shows localized corrosion in interdendritric regions. Elemental analysis of the surface reveals the presence of higher chromium content in these regions. The presence of chlorine was not detected, which suggested that during preferential attack, soluble species are also formed.

Estudo de modelo alternativo para estimação de componentes de (co)variância e predição de valores genéticos de características de crescimento em bovinos da raça Nelore

The objectives of this study were to estimate genetic parameters for non-standardized weights at nursing (PR120), at weaning (PR240), at yearling (PR365) and at post yearling (PR550), and to predict EPD's (expected progeny differences) for these traits using records from 29,769 Nellores. Covariance components and genetic parameters were estimated by mixed-model methodology, REML, using an animal model. Models for PR120, PR240, PR365 and PR455 included the random direct and maternal animal effects, the dam permanent environmental effect and the error. Fixed effects were contemporary group (CG) and age of cow at parturition (CIVP) and the covariate age of the calf at measuring. Two additional models for PR365, PR455 and PR550 analyses were used: the first included CG and CIVP, animal and maternal direct effect, residual and age of the calf (as covariate), and the second included CG and CIVP (as fixed effects), animal direct effect, residual and age of calf at measuring. Observed means±standard deviations were: 127±25kg (PR120); 191±34kg (PR240); 225±42kg (PR365); 266±51kg (PR455) and 310±56kg (PR550). From single-trait analyses, direct and maternal heritabilities for PR120, PR240, PR365 and PR455 were, respectively, .23 and .08; .19 and .10; .24 and .04; .30 and .04. Direct heritabilities were .39; .44 and .43, respectively, for PR365, PR455 and PR550. In the model without permanent effect, direct and maternal heritabilities for PR365, PR455 and PR550 were .25 and .08; .32 and .07; .38 and .03, respectively. When the estimates for standardized traits at the same period were compared, no differences in magnitude were found. Rank correlation had important changes when standardized and non-standardized traits were compared.

Spectroscopic studies of SnO2 doped with Cr, Co or Nb

SnO2 ceramics doped with different amounts of Co, Cr or Nb were investigated using visible and infrared spectroscopy at room temperature. Based on the observed d-d transitions the valence states of incorporated dopants were determined. Values of the optical band-gap were calculated in all samples. The infrared spectra of the samples displayed variations in the position, relative intensity and width of the bands, which were attributed to the presence of dopants.

Magnetic domain states in nano-sized Co nuclei electrodeposited onto monocrystalline silicon

In the present work, nano-sized magnetic nuclei of Co have been electrodeposited onto p-Si (111). The deposition follows a mechanism of progressive nucleation and growth controlled by diffusion. MFM studies showed that the transition between magnetic domain states is strongly dependent on the size and shape of the nuclei. A critical height h0 is defined below which the nuclei presented always a single-domain configuration. The limiting lower boundary for the single-domain state calculated from the theory is quantitatively coincident with the experimental results. © 2004 Elsevier B.V. All rights reserved.

A petri net based timing model for hardware/software co-design of digital systems

We have recently proposed an extension to Petri nets in order to be able to directly deal with all aspects of embedded digital systems. This extension is meant to be used as an internal model of our co-design environment. After analyzing relevant related work, and presenting a short introduction to our extension as a background material, we describe the details of the timing model we use in our approach, which is mainly based in Merlin's time model. We conclude the paper by discussing an example of its usage. © 2004 IEEE.

Horseradish peroxidase-catalyzed oxidation of rifampicin: Reaction rate enhancement by co-oxidation with anti-inflammatory drugs

The tuberculostatic drug rifampicin has been described as a scavenger of reactive species. Additionally, the recent demonstration that oral therapy with a complex of rifampicin and horseradish peroxidase (HRP) was more effective than rifampicin alone, in an animal model of experimental leprosy, suggested the importance of redox reactions involving rifampicin and their relevance to the mechanism of action. Hence, we studied the oxidation of rifampicin catalyzed by HRP, since this enzyme may represent the prototype of peroxidation-mediated reactions. We found that the antibiotic is efficiently oxidized and that rifampicin-quinone is the product, in a reaction dependent on both HRP and hydrogen peroxide. The steady-state kinetic constants Km app (101±23 mmol/l), Vmax app (0.78±0.09 μmol/l·s-1) and kcat (5.1±0.6 s-1) were measured (n=4). The reaction rate was increased by the addition of co-substrates such as tetramethylbenzidine, salicylic acid, 5-aminosalicylic acid and paracetamol. This effect was explained by invoking an electron-transfer mechanism by which these drugs acted as mediators of rifampicin oxidation. We suggested that this drug interaction might be important at the inflammatory site. © 2005 Pharmaceutical Society of Japan.

Hybrid visual-driven decision support system in video monitor manufacturing

An intelligent system that emulates human decision behaviour based on visual data acquisition is proposed. The approach is useful in applications where images are used to supply information to specialists who will choose suitable actions. An artificial neural classifier aids a fuzzy decision support system to deal with uncertainty and imprecision present in available information. Advantages of both techniques are exploited complementarily. As an example, this method was applied in automatic focus checking and adjustment in video monitor manufacturing. Copyright © 2005 IFAC.

Automatic system for thermal damage detection in manufacturing process with Internet monitoring

This work involved the development of a smart system dedicated to surface burning detection in the grinding process through constant monitoring of the process by acoustic emission and electrical power signals. A program in Visual Basic® for Windows® was developed, which collects the signals through an analog-digital converter and further processes them using burning detection algorithms already known. Three other parameters are proposed here and a comparative study carried out. When burning occurs, the newly developed software program sends a control signal warning the operator or interrupting the process, and delivers process information via the Internet. Parallel to this, the user can also interfere in the process via Internet, changing parameters and/or monitoring the grinding process. The findings of a comparative study of the various parameters are also discussed here. Copyright © 2006 by ABCM.

Structural control of photoluminescence of four poly(urethane-urea-co-1,3,5-triazine)s: Synthesis and characterization

A series of segmented poly(urethane-urea)s containing 1,3,5 triazine in the hard block and hexamethylene spacers in the soft block was prepared. The hard to soft segment ratio was varied systematically, to afford a series of polymers in which the chromophore concentration varied from 4.2% to 18.1%. Although triazine emission is located in the UV region, the films with higher content of the chromophore emitted a visible blue light (425 nm) when excited at the very red-edge of the absorption band. The photophysical properties of the materials were strongly dependent on the relative amount of triazine moieties along the main chain. Isolated moieties emit in copolymers with small amount of triazine groups, indicating that even though in solid state, these moieties tend to be apart. Two photophysical consequences were observed when the amount of triazine increases: there is some energy transfer process involving isolated moieties with consequent decrease of the lifetime and an additional red-edge emission attributed to aggregated lumophores. The mono-exponential decay observed for the isolated form is substituted by a bi-exponential decay of the aggregated species. The materials were not strong emitters, but since the N-containing triazine moieties are good electron transport groups, the polymers have potential application as electron transport enhancers in various applications. © 2006 Elsevier B.V. All rights reserved.

Direct and simultaneous determination of As, Cu, and Pb in Brazilian sugar cane spirits by graphite furnace AAS using tungsten permanent modifier with co-injection of Pd/Mg(N03)2

A method was developed using the multi-element graphite furnace atomic absorption spectrometry technique for the direct and simultaneous determination of As, Cu, and Pb in Brazilian sugar cane spirit (cachaça) samples. Also employed was the end-capped transversely heated graphite atomizer (THGA) with platforms pre-treated with W permanent modifier and co-injection of Pd/Mg(N03)2. Pyrolysis and atomization temperature curves were established in a cachaça medium (1+1; v/v) containing 0.2% (v/v) HN03 and spiked with 20 μg L-1 As and Pb and 200 μg L-1Cu. The effect of the concentration of major elements usually present in cachaça matrices (Ca, Mg, Na, and K) and ethanol on the absorbance of As, Cu, and Pb was investigated. Analytical working solutions of As, Cu, and Pb were prepared in 10% (v/v) ethanol plus 5.0 mg L-1 Ca, Mg, Na, and K. Acidified to 0.2% (v/v) HNO3, these solutions were suitable to build calibration curves by matrix matching. The proposed method was applied to the simultaneous determination of As, Cu, and Pb in commercial sugar cane spirits. The characteristic mass for the simultaneous determination was 16 pg As, 119 pg Cu, and 28 pg Pb. The pretreated tube lifetime was about 450 firings. The limit of detection (LOD) was 0.6 μg L-1As, 9.2 μg L-1 Cu, and 0.3 μg L-1Pb. The found concentrations varied from 0.81 to 4.28 μg L-1As, 0.28 to 382 mg L-1 Cu and 0.82 to 518 μg L-1 Pb. The recoveries of the spiked samples varied from 94-112% (As), 97-111% (Cu), and 95-101% (Pb). The relative standard deviation (n=12) was 6.9%, 7.4%, and 7.7% for As, Cu, and Pb, respectively, present in a sample at 0.87 μgL-1, 0.81 mgL-1, and 38.9 μgL-1concentrations.

Productivity growth in Latin American manufacturing: what role for international trade intensities?

Includes Bibliography

The transformation of the North American apparel industry: is NAFTA a curse or a blessing?

Includes bibliography