The arts and Australia's national innovation system 1994 - 2008 arguments, recommendations, challenges

Based on 15 years of arts and innovation literature, this paper explores the central proposition that the arts sector - particularly the performing arts, visual arts and crafts, new media arts and creative writing - should be included in Australian Government innovation policy development and play a significant role in national innovation. After a brief overview of innovation policy and the national innovation systems approach in Australia, we examine the marginal place of the arts in Australia's innovation agenda and various attempts to include them. We identify the principal voices that have argued for arts and innovation development: the humanities, arts and social sciences (HASS) sector, digital content industries, arts education and university research, and new media arts. After three main periods of arts and innovation policy activity from the mid.1990s (when the importance of innovation as a key driver of Australia's prosperity was recognised) to early 2008, a fourth period has opened up as part of the Australian Government's Review of the National Innovation System in 2008.

Literacy report 2008 [2008 futureSACE School to Work Innovation Program]

This project was designed to support high school teachers in participating schools to work with students whose literacy proficiency in key elements of the literacy component of the Year 9 LaN tests were in the low bands. -- p. 5.

Fully validated LC–MS/MS method for quantification of homocysteine concentrations in samples of human serum : a new approach

Reported homocysteine (HCY) concentrations in human serum show poor concordance amongst laboratories due to endogenous HCY in the matrices used for assay calibrators and QCs. Hence, we have developed a fully validated LC–MS/MS method for measurement of HCY concentrations in human serum samples that addresses this issue by minimising matrix effects. We used small volumes (20 μL) of 2% Bovine Serum Albumin (BSA) as surrogate matrix for making calibrators and QCs with concentrations adjusted for the endogenous HCY concentration in the surrogate matrix using the method of standard additions. To aliquots (20 μL) of human serum samples, calibrators or QCs, were added HCY-d4 (internal standard) and tris-(2-carboxyethyl) phosphine hydrochloride (TCEP) as reducing agent. After protein precipitation, diluted supernatants were injected into the LC–MS/MS. Calibration curves were linear; QCs were accurate (5.6% deviation from nominal), precise (CV% ≤ 9.6%), stable for four freeze–thaw cycles, and when stored at room temperature for 5 h or at −80 °C (27 days). Recoveries from QCs in surrogate matrix or pooled human serum were 91.9 and 95.9%, respectively. There was no matrix effect using 6 different individual serum samples including one that was haemolysed. Our LC–MS/MS method has satisfied all of the validation criteria of the 2012 EMA guideline.

Design, modelling and measurement of a hybrid powerplant for unmanned aerial systems

Hybrid powerplants combining internal combustion engines and electric motor prime movers have been extensively developed for land- and marine-based transport systems. The use of such powerplants in airborne applications has been historically impractical due to energy and power density constraints. Improvements in battery and electric motor technology make aircraft hybrid powerplants feasible. This paper presents a technique for determining the feasibility and mechanical effectiveness of powerplant hybridisation. In this work, a prototype aircraft hybrid powerplant was designed, constructed and tested. It is shown that an additional 35% power can be supplied from the hybrid system with an overall weight penalty of 5%, for a given unmanned aerial system. A flight dynamic model was developed using the AeroSim Blockset in MATLAB Simulink. The results have shown that climb rates can be improved by 56% and endurance increased by 13% when using the hybrid powerplant concept.

Sport development programmes for Indigenous Australians : innovation, inclusion and development, or a product of ‘white guilt’?

Under the legacy of neoliberalism, it is important to consider how the indigenous people, in this case of Australia, are to advance, develop and achieve some approximation of parity with broader societies in terms of health, educational outcomes and economic participation. In this paper, we explore the relationships between welfare dependency, individualism, responsibility, rights, liberty and the role of the state in the provision of Government-funded programmes of sport to Indigenous communities. We consider whether such programmes are a product of ‘white guilt’ and therefore encourage dependency and weaken the capacity for independence within communities and individuals, or whether programmes to increase rates of participation in sport are better viewed as good investments to bring about changes in physical activity as (albeit a small) part of a broader social policy aimed at reducing the gaps between Indigenous and non-Indigenous Australians in health, education and employment.

Individuals, Innovation, and the Internet : Why Access is Essential

As each day passes, and as new and better devices and services are developed, more and more government and private services are being moved to an online format. This movement makes access to the internet an essential for 21st Century life. The internet has become so integrated in our lives that many of us cannot imagine how we could operate without it. This omnipresent ‘being’ affects all forms of ‘normal’ social and economic activity and does so in ways that we do not realize. Those with access are able to engage with government, business, and family and friends more easily, which can lead to an improved standard of living. For the disadvantaged, however – those with the desire but without the capacity – a lack of access can be socially isolating. "Between the idea And the reality Between the motion And the act Falls the Shadow – T. S. Elliott. “The Hollow Men” Engagement in the internet economy requires both physical access and the individual to have the necessary finances and skills to make and sustain their use. If governments and the international community want a fully functioning internet economy this requires that all individuals must be operating in it. That not all individuals do so means, very simply, that the internet economy is not fully functioning. The text contextualizes for policy makers and legislatures why it is essential to ensure that individuals have appropriate access to the internet and what can be done to achieve it. The interrelationship/overlap between why access is essential, how it can be achieved and the central role of the individual to the internet economy is explored and translated into the concept of connectedness. From this, solutions for ensuring connectedness for all individuals are developed. It is Dr Cradduck’s hope that in the not too distant future readers will puzzle over why texts such as this needed to be written.

A comparison between conductive and infrared devices for measuring mean skin temperature at rest, during exercise in the heat, and recovery

Purpose: Skin temperature assessment has historically been undertaken with conductive devices affixed to the skin. With the development of technology, infrared devices are increasingly utilised in the measurement of skin temperature. Therefore, our purpose was to evaluate the agreement between four skin temperature devices at rest, during exercise in the heat, and recovery. Methods: Mean skin temperature (T̅sk) was assessed in thirty healthy males during 30 min rest (24.0± 1.2°C, 56 ± 8%), 30 min cycle in the heat (38.0 ± 0.5°C, 41 ± 2%), and 45 min recovery(24.0 ± 1.3°C, 56 ± 9%). T̅sk was assessed at four sites using two conductive devices(thermistors, iButtons) and two infrared devices (infrared thermometer, infrared camera). Results: Bland–Altman plots demonstrated mean bias ± limits of agreement between the thermistors and iButtons as follows (rest, exercise, recovery): -0.01 ± 0.04, 0.26 ± 0.85, -0.37 ± 0.98°C; thermistors and infrared thermometer: 0.34 ± 0.44, -0.44 ± 1.23, -1.04 ± 1.75°C; thermistors and infrared camera (rest, recovery): 0.83 ± 0.77, 1.88 ± 1.87°C. Pairwise comparisons of T̅sk found significant differences (p < 0.05) between thermistors and both infrared devices during resting conditions, and significant differences between the thermistors and all other devices tested during exercise in the heat and recovery. Conclusions: These results indicate poor agreement between conductive and infrared devices at rest, during exercise in the heat, and subsequent recovery. Infrared devices may not be suitable for monitoring T̅sk in the presence of, or following, metabolic and environmental induced heat stress.

Measurement of actual efficacy of compact fluorescent lamps (CFLs)

The use of compact fluorescent lamps (CFLs) in domestic residences has increased rapidly due to their higher energy efficiency and longer life expectancy when compared with traditional incandescent light bulbs. Through measurement of illuminance, actual power and apparent power, the actual efficacy and associated power factor of CFLs are studied in this paper. It is found that for an individual CFL, although its power consumption and lighting output (i.e. luminous flux) may be higher or lower than the stated values provided by the lighting manufacturers, the actual efficacy would most likely be equal to or better than the efficacy calculated from the given rated power and lumen from the manufacturers. The typical power factor for CFLs was 0.63.

The rise of low-cost sensing for managing air pollution in cities

Ever growing populations in cities are associated with a major increase in road vehicles and air pollution. The overall high levels of urban air pollution have been shown to be of a significant risk to city dwellers. However, the impacts of very high but temporally and spatially restricted pollution, and thus exposure, are still poorly understood. Conventional approaches to air quality monitoring are based on networks of static and sparse measurement stations. However, these are prohibitively expensive to capture tempo-spatial heterogeneity and identify pollution hotspots, which is required for the development of robust real-time strategies for exposure control. Current progress in developing low-cost micro-scale sensing technology is radically changing the conventional approach to allow real-time information in a capillary form. But the question remains whether there is value in the less accurate data they generate. This article illustrates the drivers behind current rises in the use of low-cost sensors for air pollution management in cities, whilst addressing the major challenges for their effective implementation.

Napping, development and health from 0 to 5 years : a systematic review

Background Duration and quality of sleep affect child development and health. Encouragement of napping in preschool children has been suggested as a health-promoting strategy. Objectives The aim of this study is to assess evidence regarding the effects of napping on measures of child development and health. Design This study is a systematic review of published, original research articles of any design. Subjects Children aged 0–5 years. Method Electronic database search was performed following Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines and assessment of research quality was carried out following a Grading of Recommendations, Assessment, Development and Evaluations (GRADE) protocol. Results Twenty-six articles met inclusion criteria. These were of heterogeneous quality; all had observational designs (GRADE-low). Development and health outcomes included salivary cortisol, night sleep, cognition, behaviour, obesity and accidents. The findings regarding cognition, behaviour and health impacts were inconsistent, probably because of variation in age and habitual napping status of the samples. The most consistent finding was an association between napping and later onset, shorter duration and poorer quality of night sleep, with evidence strongest beyond the age of 2 years. Limitations Studies were not randomised. Most did not obtain data on the children's habitual napping status or the context of napping. Many were reliant on parent report rather than direct observation or physiological measurement of sleep behaviour. Conclusions The evidence indicates that beyond the age of 2 years napping is associated with later night sleep onset and both reduced sleep quality and duration. The evidence regarding behaviour, health and cognition is less certain. There is a need for more systematic studies that use stronger designs. In preschool children presenting with sleep problems clinicians should investigate napping patterns.

Are you on board? The role of design-led innovation in strengthening key partnerships within an Australian airport

A popular lexicon for announcing partnerships within aviation is being ‘on-board’. Like boarding a plane, business partnerships requires trust in the expertise and the philosophy of another organisation. This paper reports upon the process and findings from the completion of a customer engagement project within a leading Australian Airport, as part of the wider uptake of design-led innovation. The project was completed bilaterally with Airport Corporation and prominent retail business partner undertaking a design-led approach to collaboratively explore an observed market trend affecting the performance of both businesses. A design-led catalyst facilitated the completion of this project, working within the Airport Corporation to disseminate the skills and philosophy of design over an 18 month period using an action research method. Findings reveal that the working environment necessary for design to be utilised requires; trust in the design-led approach as a new and exploratory way of completing work; leadership within the execution and delivery of project deliverables, and; a shared intrinsic motivation to develop new skills through a design-led approach which challenges a business-as-usual mentality (BAU). Design-led innovation can be deployed specifically to strengthen business partnerships through collaborative and explorative customer engagement.

Applying design-led innovation in a not-for-profit aged care provider to create shared value

This study examines the role of Design-Led Innovation in creating shared value; sustainable competitive advantage for an organisation and social value for the communities in which it operates. A case study analysed an undertaking by a not-for-profit aged care organisation to create a sustainable competitive advantage in the market by reinventing the experience of ageing and defining an innovative future business model. This paper reflects on the role of Design-Led Innovation in facilitating this change agenda and explores the particular relevance of the associated techniques in a not-for-profit, human services context. It was found that the Design-Led Innovation approach was effective in achieving the goal of defining a way for the organisation to create shared value.

Strategic renewal through design led innovation : findings from embedded practice

Strategic Renewal has been the subject of research in large organisations but has received relatively little attention in small and medium enterprises. Using case study examples of small and medium manufacturing firms, this paper presents the findings from a longitudinal action research project where participating companies explored design led innovation processes to find new ways to renew their businesses. Specifically our findings indicate that when designers act as innovation catalysts in embedded longitudinal action research, SMEs engage in strategic renewal, gain a deeper appreciation of their customers, become more aware of the value proposition of the company and engage in new practices to improve their competitive advantage.