986 resultados para IPO Failures
Resumo:
Parallel transfer of large amounts of data is attractive as (i) the data can be received in less time and (ii) is more resilient to connection failures. This is often used in e-Science under the field of data sharing. Data from one research project should be easily assessable to others regardless of the size of the data thus parallelism is used to help share the data quickly. However, there are many tasks to be carried out to make it possible: replica discovery and load detection just to name two. A common problem with most solutions is they overlook some tasks such as load detection. PHTTP is an innovate protocol which handles the tasks behind parallel transfer while presenting itself as a normal sequential transfer.
Resumo:
When assessing the psychometric properties of measures and estimate relations among latent variables, many studies in the social sciences (including marketing) often fail to comprehensively appraise the directionality of indicants. Such failures can lead to model misspecification and inaccurate parameter estimates (Jarvis et al. 2003). In order to further assess the correct directionality of a ‘media consumption’ construct’s indicants, this paper employs confirmatory tetrad analysis (CTA). Previous studies advocate this construct being best viewed as formative. However, our CTA suggests it could be modelled using a reflective orientation. We then conclude the paper drawing recommendations for future studies advocating that when assessing item directionality researchers should implement pre and post hoc tests.
Resumo:
Cluster systems provide an excellent environment to run computation hungry applications. However, due to being created using commodity components they are prone to failures. To overcome these failures we propose to use rollback-recovery, which consists of the checkpointing and recovery facilities. Checkpointing facilities have been the focus of many previous studies; however, the recovery facilities have been overlooked. This paper focuses on the requirements, concept and architecture of recovery facilities. The synthesized fault tolerant system was implemented in the GENESIS system and evaluated. The results show that the synthesized system is efficient and scalable.
Resumo:
Lesson video and video-stimulated post-lesson interviews were used to study the role of optimism in collaborative problem solving in a Grade 5/6 classroom for the purpose of informing group composition. This study focuses on the activity of two students who differed on the personal characteristic 'optimistic orientation'. It examines how the presence or absence of an optimistic orientation to failures (Seligman, 1995) contributed to these students' interactions with their groups and opportunities for collaborative creation of new knowledge. One group collaborated to develop mathematical knowledge that was new to each group member and the other group did not. These findings raise questions about how to group students who are not yet optimistic to enable collaborative activity, and how to build optimism.
Resumo:
The conventional approach ie laboratory life testing to examine the reliability of products takes long time and involves tremendous cost as samples are tested till failures. The accelerated life test (ALT) has recently been used as an alternative method. Although ALT reduces the cost of reliability testing through applying more severe environmental conditions than the normal ones, it is no longer sufficient as it does not describe the process of products’ failure explicitly and it is still highly dependent on physical testing. Consequently, novel practices need to be developed for better understanding of the products’ reliability. A novel Finite Element Analysis (FEA) model incorporating mathematical wear equations is developed in the current work and applied to polymer materials. Wear rate, a key parameter, is calculated by using a combinatorial formula that combines a conventional linear equation with a recently published exponential equation. The local wear is firstly calculated and then integrated over the sliding distance. The FEA simulation works in a loop and performs a series of simulation with updated surface geometries. The simulation is in good agreement with the physical testing result.
Resumo:
I have committed a significant period of time (in my case five years) to the purpose development of learning environments, with the belief that it would improve the self-actualisation and self-motivation of students and teachers alike. I consider it important to record and measure performance as we progressed toward such an outcome. Education researchers and practitioners alike, in the higher (university/tertiary) education systems, are seeking among new challenges to engage students and teachers in learning (James, 2001). However, studies to date show a confusing landscape littered with a multiplicity of interpretations and terms, successes and failures. As the discipline leader of the Information Technology, Systems and Multimedia (ITSM) Discipline, Swinburne University of Technology, Lilydale, I found myself struggling with this paradigm. I also found myself being torn between what presents as pragmatic student learning behaviour and the learner-centred teaching ideal reflected in the Swinburne Lilydale mission statement. The research reported in this folio reflects my theory and practice as discipline leader of the ITSM Discipline and the resulting learning environment evolution during the period 1997/8 to 2003. The study adds to the material evidence of extant research through firstly, a meta analysis of the learning environment implemented by the ITSM Discipline as recorded in peer reviewed and published papers; and secondly, a content analysis of student learning approaches, conducted on data reported from a survey of ‘learning skills inventory’ originally conducted by the ITSM Discipline staff in 2002. In 1997 information and communication technologies (ICT) were beginning to provide plausible means for electronic distribution of learning materials on a flexible and repeatable basis, and to provide answers to the imperative of learning materials distribution relating to an ITSM Discipline new course to begin in 1998. A very short time frame of three months was available prior to teaching the course. The ITSM Discipline learning environment development was an evolutionary process I began in 1997/8 initially from the requirement to publish print-based learning guide materials for the new ITSM Discipline subjects. Learning materials and student-to-teacher reciprocal communication would then be delivered and distributed online as virtual learning guides and virtual lectures, over distance as well as maintaining classroom-based instruction design. Virtual here is used to describe the use of ICT and Internet-based approaches. No longer would it be necessary for students to attend classes simply to access lecture content, or fear missing out on vital information. Assumptions I made as discipline leader for the ITSM Discipline included, firstly, that learning should be an active enterprise for the students, teachers and society; secondly, that each student comes to a learning environment with different learning expectations, learning skills and learning styles; and thirdly, that the provision of a holistic learning environment would encourage students to be self-actualising and self-motivated. Considerable reading of research and publications, as outlined in this folio, supported the update of these assumptions relative to teaching and learning. ITSM Discipline staff were required to quickly and naturally change their teaching styles and communication of values to engage with the emergent ITSM Discipline learning environment and pedagogy, and each new teaching situation. From a student perspective such assumptions meant students needed to move from reliance upon teaching and prescriptive transmission of information to a self-motivated and more self-actualising and reflective set of strategies for learning. In constructing this folio, after the introductory chaperts, there are two distinct component parts; • firstly, a Descriptive Meta analysis (Chapter Three) that draws together several of my peer reviewed professional writings and observations that document the progression of the ITSM Discipline learning environment evolution during the period 1997/8 to 2003. As the learning environment designer and discipline leader, my observations and published papers provide insight into the considerations that are required when providing an active, flexible and multi-modal learning environment for students and teachers; and • secondly, a Dissertation (Chapter Four), as a content analysis of a learning skills inventory data collection, collected by the ITSM Discipline in the 2002 Swinburne Lilydale academic year, where students were encouraged to complete reflective journal entries via the ITSM Discipline virtual learning guide subject web-site. That data collection included all students in a majority of subjects supported by the ITSM Discipline for both semesters one and two 2002. The original purpose of the journal entries was to have students reflectively involved in assessing their learning skills and approaches to learning. Such perceptions were tested using a well-known metric, the ‘learning skills inventory’ (Knowles, 1975), augmented with a short reflective learning approach narrative. The journal entries were used by teaching staff originally and then made available to researchers as a desensitised data in 2003 for statistical and content analysis relative to student learning skills and approaches. The findings of my research support a view of the student and teacher enculturation as utilitarian, dependent and pragmatically self-motivated. This, I argue, shows little sign of abatement in the early part of the 21st Century. My observation suggests that this is also independent of the pedagogical and educational philosophy debate or practice as currently presented. As much as the self-actualising, self-motivated learning environment can be justified philosophically, the findings observed from this research, reported in this folio, cannot. Part of the reason for this originates from the debate by educational researchers as to the relative merits of liberal and vocational philosophies for education combined with the recent introduction of information and communication technologies, and commodification of higher education. Challenging students to be participative and active learners, as proposed by educationalists Meyers and Jones (1993), i.e. self-motivated and self-actualising learners, has proved to be problematic. This, I will argue, will require a change to a variable/s (not yet identified) of higher education enculturation on multiple fronts, by students, teachers and society in order to bridge the gap. This research indicates that tertiary educators and educational researchers should stop thinking simplistically of constructivist and/or technology-enabled approaches, students learning choices and teachers teaching choices. Based on my research I argue for a far more holistic set of explanations of student and staff expectations and behaviour, and therefore pedagogy that supports those expectations.
Resumo:
Drawing on the literatures of history, sociology, epidemiology, and microbiology, this thesis compares syphillis with human immunodeficiency virus, with special reference to the social and historical factors likely to be relevant to the control or eradication of acquired imune dificiency syndrom (AIDS). The sudden appearance of a new disease causing suffering and death in a community, engenders apprehension and fear which is often manifested as hysteria against, and vilification of, those who have the disease. This fear is greatly increased should the disease be sexually-transmitted. Syphilis in a venereal form, occured in Europe toward the end of the 15th Century. Initially it was an acute, fulminating disease which rapidly spread through Europe and Asia. Attempts to control the disease have gone through periods of either partial successes or massive failures and have ended in frustration for the authorities. When the syndrome of acquired immune deficiency (AIDS) was first reported, it was seen in Western countries in homosexual men. However, as non-homosexual community members and children became infected, it became apparent to authorities that a pandemic was accurring. Within a few years, the disease was identified worldwide. Isolation of the virus (HIV-1), and development of test for detection of carriers, plus restoration of clean blood and blood-product supplies, have reassured the community to some extent. The history of syphilis shows that neither the epidemiological medical, nor the economic political approaches to disease control work, although there are positive aspects resulting from both. It is social responses that will offer the most hope in the long term for the control of AIDS and other sexually-transmitted diseases.
Resumo:
The lack of attention to quality control by house builders in the Australian State of Victoria has been a contentious issue for more than two decades. Ina an attempt to improve the quality of housing, various mechanisms such as voluntary and compulsory registration schemes have been adopted and discarded by industry-based organisations and government. While builders are encouraged to improve construction quality, little is known and published about the quality of housing produced by owner builders specifically during the seven year warranty period after construction is completed. With this in mind, this thesis presents research findings that compare the latent defects in houses built by owner builders with those of registered builders. Using inspection reports provided by Archicentre a sample of 1772 houses, of which 1002 were owner builders
was used to determine the severity, the incidence, and location of defects within each house type. Houses less than a year old were found to contain a siginificant proportion of defects for both types of builder. In addition, it was found that HO builders had a mean of 2.74 defects per house and HR builders mean of 2.30 defects per house for the seven-year warranty period. To determine whether there was a significant difference between the quality of housing produced by HO and HR the statistical technique of Chi-squared analysis was undertaken at a 5% level of significance. The analysis revealed that there was a significant difference between the quality of housing procured by owner
builders. In particular, it was found that the important category of workmanship for HO builders had significantly less defects that HR builders, which suggests that HR builders need to improve their managerial practices and the quality of on-site supervision. In essence, this thesis has provided a series of benchmark metrics for latent defects against which current and future legislative programs con be compared for new housing in the State of Victoria. It is recommended that future research focus on the methods for improving the role of the on-site supervisor as they are considered to be the important link in the quality chain.
Resumo:
The development of fault-tolerant computing systems is a very difficult task. Two reasons contributed to this difficulty can be described as follows. The First is that, in normal practice, fault-tolerant computing policies and mechanisms are deeply embedded into most application programs, so that these application programs cannot cope with changes in environments, policies and mechanisms. These factors may change frequently in a distributed environment, especially in a heterogeneous environment. Therefore, in order to develop better fault-tolerant systems that can cope with constant changes in environments and user requirements, it is essential to separate the fault tolerant computing policies and mechanisms in application programs. The second is, on the other hand, a number of techniques have been proposed for the construction of reliable and fault-tolerant computing systems. Many computer systems are being developed to tolerant various hardware and software failures. However, most of these systems are to be used in specific application areas, since it is extremely difficult to develop systems that can be used in general-purpose fault-tolerant computing. The motivation of this thesis is based on these two aspects. The focus of the thesis is on developing a model based on the reactive system concepts for building better fault-tolerant computing applications. The reactive system concepts are an attractive paradigm for system design, development and maintenance because it separates policies from mechanisms. The stress of the model is to provide flexible system architecture for the general-purpose fault-tolerant application development, and the model can be applied in many specific applications. With this reactive system model, we can separate fault-tolerant computing polices and mechanisms in the applications, so that the development and maintenance of fault-tolerant computing systems can be made easier.
Resumo:
Food laws can encompass considerations that extend beyond food safety. The recent food standard mandating the fortification of flour with folic acid in Australia illustrates the legal problems and legal risks when governments introduce food standards that aim to medicinalise the population through the food supply despite a lack of scientific consensus. Legal analysis of the process by which the folic acid fortification was introduced into flour in Australia demonstrates legal inadequacies, administrative and policy failures, as well as flaws in safety assumptions. An analysis of the restrictions on legal rights and remedies for any adversely affected consumers seeking legal redress, and the existence of statutory immunities for governments, demonstrates a need for legal reform and changes in policy development processes.
Resumo:
The building profession is increasingly becoming more demanding with respect to building environmental performance. Intentions are to provide best practices into our buildings. In part, this is a response due to the Australian government and other independent organisations that have developed policy on rating tools and performance ranking measures, all with the intention of accomplishing environmentally sustainable buildings.
With rating systems endorsing innovative environmental design solutions, it could be asked: Are our buildings really operating as rated? Do we know whether our designs are in compliance with what was calculated or simulated? Is there a feedback loop informing the design process on successes or failures in our designs or mechanical services?
While ratings continue to focus on ‘by design’ or ‘as built’ rewards, few tools acknowledge perhaps the more crucial bottom line: ‘as performing’. With the exception of an AGBR (Australian Green Building Rating) scheme on actual annual energy consumption, there appears to be no ‘as performing’ assessment. Furthermore, practically every building is a prototype (a one-off) and requires commissioning, programming and scheduling of its services. It would certainly appear that as stakeholders (the procurers, owners, facilities managers and users) of the newly built environment, that what we really want to know is actual on-site confirmation of performance. It is the objective of the Mobile Architecture and Built Environment Laboratory (MABEL), to provide such a service.
Resumo:
There is a burgeoning literature on educational change – how to make it and how to understand its failures in order that the causes can be remedied next time. Much of this literature implies that when free and autonomous policy agents know what they are doing, they can shift institutional structures and habituated ways of doing and being. In this article we mobilize Bourdieu, who rejected this binary of structure and agency, in favour of the notion of ‘field’, ‘habitus’ and ‘capitals’, to theorize one case of change. We describe the shifting policy-scape in Australia in the latter part of the twentieth century which created some opportunities for students to act as educational leaders and participate in making decisions about their learning and schooling. We then develop a specific and situated theorization of change in a contested and hierarchical educational ‘field’. We argue that the continued press from the political field and the wider field of power to increase levels of mass schooling produced a ‘principal opposition’ in the schooling field between democratization and hierarchization. This opposition, we propose, is now in policies, institutional changes and
the varying actions of educators, making the field not only contested but also unstable: this produces further spaces and opportunities for both hierarchic and democratic changes.
Resumo:
This thesis examines earnings management in the Australian initial public offering (IPO) market. In general, the results show that Australian IPO firms do engage in earnings management at the offer date. There is sufficienct evidence to suggest that firms that manage earnings at the offer date suffer poorer long-run performance.
Resumo:
The objective of this thesis was to derive two models: the first, to predict which companies on the Stock Exchange of Thailand would join the Companies Under Rehabilitation (REHABCO) sector; and the second to predict which companies in the REHABCO sector would go on to be delisted from there.
Resumo:
A case study of the Job Club Program for unemployed people, as it was run in a single location in Victoria, Australia. Documents and describes the views of those involved and explores their perceptions of the successes and failures of the program.