Cadmium Telluride Magic-Sized Clusters and Superstructures

The aim of the present work is to gain new insights into the formation mechanism of CdTe magic-sized clusters (MSCs) at low temperatures, as well as on their evolution towards 1D and 2D nanostructures and assemblies thereof, under mild reaction conditions. The reaction system included toluene as solvent, octylamine as primary alkylamine, trioctylphosphine-Te as chalcogenide precursor and Cd(oleate)2 as metal precursor. UV-Vis absorption spectroscopy and transmission electron microscopy (TEM) were used to analyze samples containing concentrations of octylamine of 0.2, 0.8 and 2 M: well-defined, sharp absorption peaks were observed, with peaks maxima at 449, 417 and 373 nm respectively, and 1D structures with a string-like appearance were displayed in the TEM images. Investigating peaks growth, step-wise peaks shift to lower energies and reverse, step-wise peak shift to higher energies allowed to propose a model to describe the system, based on interconnected [CdTe]x cluster units originating an amine-capped, 1-dimensional, polymer-like structure, in which different degrees of electronic coupling between the clusters are held responsible for the different absorption transitions. The many parameters involved in the synthesis procedure were then investigated, starting from the Cd:Te ratio, the role of the amine, the use of different phosphine-Te and Cd precursors. The results allowed to gain important information of the reaction mechanism, as well as on the different behavior of the species featuring the sharp absorption peaks in each case. Using Cd(acetate)2 as metal precursor, 2D structures were found to evolve from the MSCs solutions over time, and their tendency to self-assemble was then analyzed employing two amines of different alkyl chain length, octylamine (C-8) and oleylamine (C-18). Their co-presence led to the formation of free-floating triangular nanosheets, which tend to readily aggregate if only octylamine is present in solution.

I) Improving low photocurrent of pseudorotaxane based solar cell II) Synthesis and characterization of new Fe(0) cyclopentadienone complexes

Next to conventional solar panels that harvest direct sunlight, p-type dye-sensitized solar cells (DSSCs) have been developed, which are able to harvest diffuse sunlight. Due to unwanted charge recombination events p-type DSSCs exhibit low power conversion efficiencies (PCEs). Previous research has shown that dye-redox mediator (RM) interactions can prevent these recombination events, resulting in higher PCEs. It is unknown how the nature of dye-RM interactions affects the PCEs of pseudorotaxane-based solar cells. In this research this correlation is investigated by comparing one macrocycle, the 3-NDI, in combination with the three dyes that contains a recognition sites. 2D-DOSY-NMR experiments have been conducted to evaluate the diffusion constants (LogD) of the three couple. The research project has been stopped due to the coronavirus pandemic. The continuation of this thesis would have been to synthesize a dye on the basis of the data obtained from the diffusion tests and attempt the construction of a solar cell to then evaluate its effectiveness. During my training period I synthetized new Fe(0) cyclopentadienone compounds bearing a N-Heterocyclic Carbene ligand. The aim of the thesis was to achieve water solubility by modifications of the cyclopentadienone ligand. These new complexes have been modified using a sulfonation reaction, replacing an hydroxyl with a sulfate group, on the alkyl backbone of the cyclopentadienone ligand. All the complexes were characterized with IR, ESI-MS and NMR spectroscopy, and a new Fe(0) cyclopentadienone complex, involved as an intermediate, was obtained as a single crystal and was characterized also with X-Ray spectroscopy.

Synthesis of manganese organometallic complexes

Il presente lavoro di tesi si inserisce in un progetto di ricerca volto alla sintesi di nuovi complessi di metalli di transizione per lo sviluppo di catalizzatori da impiegare in reazioni di catalisi omogenea. In particolare il mio progetto si è concentrato sulla sintesi di complessi organometallici di manganese con leganti carbenici N-eterociclici (NHC). La scelta dei leganti è stata effettuata in modo tale da poter avere leganti chelanti NHC di tipo MIC (mesoionic carbene) sintetizzati tramite cicloaddizione tra un alchino ed un azide catalizzata da rame (CuAAC) e N-alchilazione. Lo studio di questi complessi a base di manganese è ancora tutt’oggi agli albori, leganti NHC vengono molto utilizzati grazie alla possibilità di variarne le proprietà steriche ed elettroniche e alla possibilità di formare legami forti con quasi tutti i metalli. Il manganese è stato scelto poiché un elemento abbondante, poco tossico e poco costoso. The present thesis work is part of a research project aimed at the synthesis of new transition metal complexes to be used in homogeneous catalysis reactions. In particular my project focused on the synthesis of manganese organometallic complexes with N-heterocyclic carbene ligands (NHC). The choice of ligands was carried out to have NHC chelating ligands of the class of MIC (mesoionic carbene). These ligands are synthesized by cycloaddition between alkyl and azide with a copper-catalyzed reaction (CuAAC) and N-alkylation in order to obtain MIC after deprotonation. The study of these manganese-based complexes is still in its infancy today, NHC ligands are widely used thanks to the possibility of varying their steric and electronic properties and the possibility of forming strong bonds with almost all metals. The choice of manganese was made because is an abundant, low-toxic and inexpensive element.

Theoretical and experimental investigations on homologation of ethanol to butanol using a ruthenium-based catalyst

The mechanism of homologation of bioethanol to butanol and higher alcohols via the Guerbet reaction was computationally and experimentally investigated. The catalytic pathway involves a ruthenium-based complex and a base co-catalyst which work simultaneously. Due to selectivity issues, secondary products were formed and high competition between main pathway and side reactions was recorded. Herein, the overall catalytic mechanism for all the processes involved in was investigated, also considering the principal side reactions, using density functional theory (DFT) methods and experiments to confirm theoretical outcomes. Due to the complexity of the reaction network, kinetic simulations were established from DFT results, confirming experimental products distribution and giving insights into the factors governing the reaction mechanism.

Multifactorial analysis and food safety issues of edible marine gastropods intended for human consumption

The present thesis aims to evaluate a method to assess the viability; estimate the bacterial and viral (Hepatitis A and Norovirus) contamination; describe how some parameters change during a week in refrigerated condition and after 24 hours of immersion; estimate indole-producing bacteria and biogenic amines; evaluate the presence of saxitoxin and tetrodotoxin. The method to assess the viability using sea salt is easy to apply. Marine gastropods did not accumulate fecal contaminants, but vibrios due to their feeding. The Vibrio spp. load was even higher than the one registered on Ruditapes philippinarum belonging to the same area For what to concern the evaluation during a week in refrigerated condition and after 24 hours of immersion, non-re-immersed gastropods exceeded the acceptable mortality (10%) after three days in refrigerated conditions, but the Vibrio spp. load did not show a significant increase within three days. The TVC was already high from the beginning and its major part consisted of SSOs, which could be explained by gastropods’ feed, such as the Pseudomonas spp. load and the abundance of IPB. The BAs amount was also correlated with viability and had a statistically significant difference within a week on refrigerated conditions, principally because putrescine, tyramine, spermidine, and cadaverine rise in non-re-immersed samples. It also should be noted that the BAs amount was higher on average than the recommendation of literature. Moreover, re-immersed batches showed acceptable viability even after 3 days, and the Vibrio spp. load, TVC, SSOs, and biogenic amines remained almost constant within a week contrary to non-re-immersed samples. Finally, T. mutabilis and B. brandaris did not accumulate NoVs and TTX. We obtained only one positivity of the HAV sample and traces of STX (not at levels toxic to humans). Our results contribute to identifying food-borne hazards for T. mutabilis and B. brandaris.

Synthesis and electronic properties of luminescent silicon nanocrystals and copper indium sulphide quantum dots

In the last decades, nanomaterials, and in particular semiconducting nanoparticles (or quantum dots), have gained increasing attention due to their controllable optical properties and potential applications. Silicon nanoparticles (also called silicon nanocrystals, SiNCs) have been extensively studied in the last years, due to their physical and chemical properties which render them a valid alternative to conventional quantum dots. During my PhD studies I have planned new synthetical routes to obtain SiNCs functionalised with molecules which could ameliorate the properties of the nanoparticle. However, this was certainly challenging, because SiNCs are very susceptible to many reagents and conditions that are often used in organic synthesis. They can be irreversibly quenched in the presence of alkalis, they can be damaged in the presence of oxidants, they can modify their optical properties in the presence of many nitrogen-containing compounds, metal complexes or simple organic molecules. If their surface is not well-passivated, the oxygen can introduce defect states, or they can aggregate and precipitate in several solvents. Therefore, I was able to functionalise SiNCs with different ligands: chromophores, amines, carboxylic acids, poly(ethylene)glycol, even ameliorating functionalisation strategies that already existed. This thesis will collect the experimental procedures used to synthesize silicon nanocrystals, the strategies adopted to functionalise effectively the nanoparticle with different types of organic molecules, and the characterisation of their surface, physical properties and luminescence (mostly photogenerated, but also electrochemigenerated). I also spent a period of 7 months in Leeds (UK), where I managed to learn how to synthesize other cadmium-free quantum dots made of copper, indium and sulphur (CIS QDs). During my last year of PhD, I focused on their functionalisation by ligand exchange techniques, yielding the first example of light-harvesting antenna based on those quantum dots. Part of this thesis is dedicated to them.

Beyond pollinator reward: steps forward and knowledge gaps on the role of floral nectar in plant-animal interactions.

The work done within the framework of my PhD project has been carried out between November 2019 and January 2023 at the Department of Biological, Geological and Environmental Sciences of the University of Bologna, under the supervision of Prof. Marta Galloni and PhD Gherardo Bogo. A period of three months was spent at the Natural History Museum of Rijeka, under the supervision of Prof. Boštjan Surina. The main aim of the thesis was to investigate further the so-called pollinator manipulation hypothesis, which states that when a floral visitor gets in contact with a specific nectar chemistry, the latter affects its behavior of visit on flowers, with potential repercussions on the plant reproductive fitness. To the purpose, the topic was tackled by means of three main approaches: field studies, laboratory assessments, and bibliographic reviews. This research project contributes to two main aspects. First, when insects encounter nectar-like concentrations of a plethora of secondary metabolites in their food-environment, various aspects of their behavior relevant to flower visitation can be affected. In addition, the results I gained confirm that the combination of field studies and laboratory assessments allows to get more realistic pictures of a given phenomenon than the single approaches. Second, reviewing the existent literature in the field of nectar ecology has highlighted how crucial is to establish the origin of nectar biogenic amines to either confirm or reject the multiple speculations made on the role of nectar microbes in shaping plant-animal interactions.

Diazene photoswitches in artificial molecular machines and light-effected materials

The research developed in this thesis focused on the spectroscopic and photochemical characterization of molecular diazene photoswitches, both as individual species and as functional components of mechanically interlocked molecules, molecular-based materials and artificial molecular machines and motors. Among the plethora of photochromes reported so far, azobenzene is the most versatile photoswitch due to its reproducible and well-established photochemical properties. Part I of this thesis work focuses on the characterization of light-responsive supramolecular systems based on azobenzene: a photochemically-driven rotary motor, a light-responsive supramolecular polymeric material and a supramolecular system capable of photoinduced entantiodiscrimination. Despite the wide success of azobenzene photoswitches, the tunability of their photochemical properties as a function of the diversified substitution pattern on its aryl ring presents intrinsic limitations. To overcome this issue, in the last decade heteroaryl azoswitches (i.e., azobenzene having heterocyclic rings in place of one or both phenyl groups) have attracted a great deal of attention. Hence, Part II of this thesis work treats the photochemical characterization of two different families of azoheteroarenes embedding imidazolium and thienyl functionalities in their structures. Their potential implementation in water-soluble artificial molecular machines and light-effected semiconductor materials is also assessed.

New insights into vaginal environment during pregnancy: a multi-omics approach

The present thesis aims to provide a thorough comprehension of the vaginal ecosystem of pregnant women and enhance the knowledge of pregnancy pathophysiology. The first study emphasized the importance of limiting protein intake from animal sources, consuming carbohydrates, and avoiding starting pregnancy overweight to maintain a healthy vaginal environment characterized by lactobacilli and related metabolites. In the second paper, a reduction in bacterial diversity, an increase in Lactobacillus abundance, and a decrease in bacterial vaginosis-related genera were observed during pregnancy. Lactobacillus abundance correlated with higher levels of lactate, sarcosine, and amino acids, while bacterial vaginosis-related genera were associated with amines, formate, acetate, alcohols, and short-chain fatty acids. An association between intrapartum antibiotic prophylaxis for Group B Streptococcus and higher vaginal abundance of Prevotella was found. Moreover, women experiencing a first-trimester miscarriage displayed a higher abundance of Fusobacterium. The third study explored the presence of macrolides and tetracyclines resistance genes in the vaginal environment, highlighting that different vaginal microbiota types were associated with distinct resistance profiles. Lactobacilli-dominated ecosystems showed fewer or no resistance genes, while women with increased bacterial vaginosis-related genera were positive for resistance genes. The last two papers aimed to identify potential biomarkers of vaginal health or disease status. The fourth paper showed that positivity for Torquetenovirus decreased from the first to the third trimester, being more prevalent in women with higher vaginal leukocyte counts. Torquetenovirus-positive samples showed higher levels of cytokines, propionate, and cadaverine. Lactobacillus species decreased in Torquetenovirus-positive samples, while Sneathia and Shuttleworthia increased. The last work pointed out the association between clade 2 of Gardnerella vaginalis and bacterial vaginosis. Moreover, as the number of simultaneously detected G. vaginalis clades increased, bacterial vaginosis-associated bacteria also tended to increase. Additionally, sialidase gene levels negatively correlated with Lactobacillus and positively correlated with Gardnerella, Atopobium, Prevotella, Megasphaera, and Sneathia.

Towards the kinetic resolution of mechanically planar chiral rotaxanes

In this work, we reported the synthesis and characterization of two [2]rotaxanes endowed with a central ammonium group and two triazolium recognition stations on either side, acting as complexation sites for a dibenzo-24-crown-8 ether macrocycle. These mechanically interlocked architectures were obtained through the interlocking of a functionalized achiral macrocycle with Cs symmetry (where the symmetry element is a mirror plane corresponding to plane of the ring) and a C∞v symmetric axle (where a mirror plane and a C∞ principal axis are aligned along the axle length). We took advantage of the reversible acid/base triggered molecular shuttling of the ring between two lateral triazolium units to switch the rotaxanes between prochiral and mechanically planar chiral forms, which exists as two rapidly-interconverting co-conformers. We exploited the reactivity of the central amino group to attach an optically pure chiral substituent, with the goal of demonstrating the enantiomeric nature of the co-conformers and to obtain a non-zero diastereomeric excess in the resulting diastereomeric products through a dynamic kinetic resolution. To this end, two enantiopure reagents were chosen that could perform clean and fast reaction with amines: a sulfonyl chloride and an acyl chloride. Only the acyl chloride successfully produced an amide in high yield with the deprotonated rotaxane. The group added to the central amine station acted as a stopper against the shuttling of the macrocycle along the axis, thus preventing the fast interconversion of the two mechanically planar enantiomers. We analysed the results through static and dynamic NMR spectroscopic techniques by varying temperature and solvent used. Indeed, the presence of diastereomers was recorded alongside the configurational isomers resulting from the slow rotation of the CN-CO bond of the amide moiety, thus paving the way for a dynamic kinetic resolution.

Direct C–H silylation and borylation of biomass derivatives by iridium heterogeneous catalysts

Furfural and its derivatives represent renewable and readily available platforms for a wide range of chemicals. Much attention has been devoted to their functionalization over the last years. TM-catalysed C–H activation has emerged as a powerful tool for synthesizing new C–C and C–X bonds. Moreover, it provides a sustainable way to obtain molecules by reducing waste and saving steps. At the same time, iridium catalysts have proven to be very active in some C–H functionalizations of several (hetero)arenes. Although very promising, this technique is still poorly applied on an industrial scale due to the severe conditions required. Continuous flow chemistry using heterogeneous catalysts appears to be a valuable way to overcome these problems. In this work, we present different solutions for the immobilization of homogeneous iridium complexes on silica gels, using bidentate amines and phosphines as anchoring ligands. We successfully employed the catalysts in C–H silylation and borylation of furfural, using C2 located directing group. In this way, we finally obtained a suitable catalyst that could be potentially applied in continuous-flow chemistry.