High-resolution in situ oxygen microprofiles, porewater and solid phase geochemistry from the Crimean shelf (Black Sea) from Maria S. Merian cruise MSM15/1

The outer western Crimean shelf of the Black Sea is a natural laboratory to investigate effects of stable oxic versus varying hypoxic conditions on seafloor biogeochemical processes and benthic community structure. Bottom-water oxygen concentrations ranged from normoxic (175 µmol O2/L) and hypoxic (< 63 µmol O2/L) or even anoxic/sulfidic conditions within a few kilometers' distance. Variations in oxygen concentrations between 160 and 10 µmol/L even occurred within hours close to the chemocline at 134 m water depth. Total oxygen uptake, including diffusive as well as fauna-mediated oxygen consumption, decreased from 15 mmol/m**2/d on average in the oxic zone, to 7 mmol/m**2/d on average in the hypoxic zone, correlating with changes in macrobenthos composition. Benthic diffusive oxygen uptake rates, comprising respiration of microorganisms and small meiofauna, were similar in oxic and hypoxic zones (on average 4.5 mmol/m**2/d), but declined to 1.3 mmol/m**2/d in bottom waters with oxygen concentrations below 20 µmol/L. Measurements and modeling of porewater profiles indicated that reoxidation of reduced compounds played only a minor role in diffusive oxygen uptake under the different oxygen conditions, leaving the major fraction to aerobic degradation of organic carbon. Remineralization efficiency decreased from nearly 100 % in the oxic zone, to 50 % in the oxic-hypoxic zone, to 10 % in the hypoxic-anoxic zone. Overall, the faunal remineralization rate was more important, but also more influenced by fluctuating oxygen concentrations, than microbial and geochemical oxidation processes.

Geochemistry of continental slope and deep sea basin sediments off Uruguay

Pore water and solid phase from surface sediments of the continental slope off Uruguay and from the Argentine Basin (southwestern Atlantic) were investigated geochemically to ascribe characteristic early diagenetic reactions of iron and manganese. Solid-phase iron speciation was determined by extractions as well as by Mössbauer spectroscopy. Both methods showed good agreement (<6% deviation) for total-Fe speciation. The proportion of easy reducible iron oxyhydroxide relative to total-Fe oxides decreased from the continental slope to the deep sea which is attributed to an increase in crystallinity during transport as well as to a general decrease of iron mobilization. The product of iron reoxidation is Fe oxyhydroxide which made up less than 5% of total Fe. In addition to this fraction, a proportion of smectite bound iron was found to be redox reactive. This fraction made up to 10% of total Fe in sediments of the Argentine Basin and was quantitatively extracted by 1 N HCl. The redox reactive Fe(+II) fraction of smectite was almost completely reoxidized within 24 h under air atmosphere and may therefore considerably contribute to iron redox cycling if bioturbation occurs. In the case of the slope sediments we found concurrent iron and manganese release to pore water. It is not clear whether this is caused by dissimilatory iron and manganese reduction at the same depth or dissimilatory iron reduction alone inducing Mn(+IV) reduction by (abiotic) reaction with released Fe2+. The Argentine Basin sediment showed a significant manganese solid-phase enrichment above the denitrification depth despite the absence of a distinct pore-water gradient of Mn. This implies a recent termination of manganese mobilization and thus a non-steady-state situation with respect to sedimentation or to organic carbon burial rate.

Mineralogy and geochemistry at DSDP Leg 80 Holes

Cenozoic sediments recovered from Sites 548, 549, and 550 were the objects of mineralogical (bulk sample and <2 - µm fraction) and geochemical (HCl extract) studies. Thin sections of rock pebbles embedded in sediments (upper levels at Site 548, particularly) were examined on a polarizing microscope. This study outlines the vertical and lateral variation and evolution of the sedimentation. In the Paleocene and lower Eocene, the clay fraction is abundant and smectite is practically the sole existing clay mineral. High Mn, Al, Fe, Mg, and K contents were measured in HCl extracts. Through the middle Eocene, carbonates become more abundant - highly dominant at Site 548. Metal contents in HCl extracts are very low. The clay fraction, although dominated at all sites by smectites, becomes richer in illite and poorly crystallized chlorite. At the middle/upper Miocene boundary, a significant decrease in the smectite/(illite + chlorite) ratio occurs at all sites, and this decrease continues into the middle Pliocene. This decrease is marked by an abrupt increase of quartz at Site 548. At the two other sites, carbonates remain highly predominant; HCl extracts reflect the relative abundance of the clay and carbonate fractions. After a brief recurrence of smectite in a high-metal-content interval, illite and chlorite become the dominant clay minerals in the upper Pliocene and the Pleistocene, where numerous variations in mineralogical composition occur in the clay fraction (Sites 548 and 549) or in non-clay components (Site 548). Several pebbles of various nature and origin, encountered in different levels of this interval at Site 548, appear to have an ice-rafting origin. This study points out three main breaks in the general evolution of the sedimentation: the first, corresponding to the lower/middle Eocene boundary, is marked by the increase of carbonates and associated elements; the second, corresponding to the middle/upper Miocene boundary, is marked by a major decrease of the smectite/(illite + chlorite) ratio at all sites and by a massive appearance of quartz at Site 548; and the third, which occurred toward the late Pliocene, is marked by the dominance of primary clay minerals and the arrival of ice-rafted pebbles. Our interpretation of results considers paleohydrological and paleoclimatic phenomena. It is suggested that the major middle/late Miocene break was associated with an increase of the deep bottom-water circulation between the Norwegian Sea and the North Atlantic Ocean, and/or a climatic evolution: humidification and cooling of climate. The changes toward the late Pliocene appear to have been the first effects of the glaciations at the end of Cenozoic.

Geochemistry and mineralogy of selected carbonaceous claystones at DSDP Hole 76-534

Four dominant depositions of carbonaceous claystones are recognized to have occurred during the early Aptian to middle Albian at Site 534. There are correlations of stable isotope ratios with organic carbon content and of clay content with clay mineralogy of the samples. Almost all organic carbon in these sequences has very negative terrestrial isotope ratios, and the clay of that age indicates predominance of aluminous montmorillonite, which is thought to be of terrigenous origin. It is suggested that development of coastal vegetation belts and deltaic outbuilding with consequent outpouring of land-plant detritus and terrigenous elastics into the deep basins probably led to formation of the "black shale" facies.

Collection of data on particulate and dissolved soil phosphorus in the Jena Experiment (Main Experiment, time series since 2002)

This data set contains two time series of measurements of dissolved phosphorus (organic, inorganic and total with a biweekly resolution) and dissolved inorganic phosphorus with a seasonal resolution. In addition, data on phosphorus from soil samples measured in 2007 and fractionated by different acid-extrations (Hedley fractions) are provided. All data measured at the main experiment plots of a large grassland biodiversity experiment (the Jena Experiment; see further details below). In the main experiment, 82 grassland plots of 20 x 20 m were established from a pool of 60 species belonging to four functional groups (grasses, legumes, tall and small herbs). In May 2002, varying numbers of plant species from this species pool were sown into the plots to create a gradient of plant species richness (1, 2, 4, 8, 16 and 60 species) and functional richness (1, 2, 3, 4 functional groups). Plots were maintained by bi-annual weeding and mowing. 1. Dissolved phosphorus in soil solution: Suction plates installed on the field site in 10, 20, 30 and 60 cm depth were used to sample soil pore water. Cumulatively extracted soil solution was collected every two weeks from October 2002 to May 2006. The biweekly samples from 2002, 2003 and 2004 were analyzed for dissolved organic phosphorus (DOP), dissolved inorganic phosphorus (PO4P) and dissolved total phosphorus (TDP) by Continuous Flow Analyzer (CFA SAN ++, SKALAR [Breda, The Netherlands]). 2. Seasonal values of dissolved inorganic phosphorus in soil solution were calculated as volume-weighted mean values of the biweekly measurements (spring = March to May, summer = June to August, fall = September to November, winter = December to February). 3. Phosphorus fractions in soil: Five independent soil samples per plot were taken in a depth of 0-15 cm using a soil corer with an inner diameter of 1 cm. The five samples per plot were combined to one composite sample per plot. A four-step sequential P fractionation (Hedley fractions) was applied and concentrations of P fractions in soil were measured photometrically (molybdenum blue-reactive P) with a Continuous Flow Analyzer (Bran&Luebbe, Germany).

Phosphorus fractions in soil of the Jena Experiment (Main Experiment, year 2007)

This data set contains measurements of phosphorus fractions (Hedley fractions) in soil collected 2007 from the main experiment plots of a large grassland biodiversity experiment (the Jena Experiment; see further details below). In the main experiment, 82 grassland plots of 20 x 20 m were established from a pool of 60 species belonging to four functional groups (grasses, legumes, tall and small herbs). In May 2002, varying numbers of plant species from this species pool were sown into the plots to create a gradient of plant species richness (1, 2, 4, 8, 16 and 60 species) and functional richness (1, 2, 3, 4 functional groups). Plots were maintained by bi-annual weeding and mowing. Soil sampling and analysis: Five independent soil samples per plot were taken in a depth of 0-15 cm using a soil corer with an inner diameter of 1 cm. The five samples per plot were combined to one composite sample per plot. A four-step sequential P fractionation (Hedley fractions) was applied. Sequentially, 20 ml NaHCO3 (adjusted to pH 8.5), 30 ml NaOH, and 35 ml HCl were used as extraction solutions for 0.5 g soil. The last step comprised the combustion (550 °C) of the remaining soil to destroy all organic material followed by shaking with 20 ml H2SO4. Organic P concentrations of the respective fractions were calculated as the difference between total dissolved P and inorganic P. Duplicate phosphate concentrations of P fractions in soil were measured photometrically (molybdenum blue-reactive P) with a Continuous Flow Analyzer (Bran&Luebbe, Germany).

Mineralogy and inorganic geochemistry of sediments at DSDP Leg 65 Holes

During Leg 65, 15 holes were drilled at four sites located on young crust in the mouth of the Gulf of California. Quaternary to upper Pliocene hemipelagic sediments above and interlayered within the young basaltic basement were cored. The influence of hot lava, high temperature gradients, and hydrothermal activity on the mineralogy and geochemistry of the terrigenous sediments near contacts with basalts might therefore be expected. The purpose of the present study was to determine the mineralogy and inorganic geochemistry of these sediments and to analyze the nature and extent of low temperature alteration. To this end we studied the mineralogy and inorganic geochemistry of 75 sediment samples, including those immediately overlying uppermost basalts and those from layers alternating with basalts within the basement. We separated three size fractions - <2 µm (clay), 2-20 µm (intermediate), and >20 µm (coarse) - and applied the following mineralogical determinations: x-ray diffraction (XRD), infrared spectroscopy, transmission and scanning electron microscopy, and optical microscopy (for coarse fractions, using thin sections and smear slides). We calculated the percentages of clay minerals using Biscaye's (1964) method, and used routine wet chemical analyses to determine bulk composition and quantitative spectral analyses for trace elements.