The functional fit between collaborative software and work systems:Qualification of work system needs to software functionality

The study develops an approach that tries to validate software functionality to work systems needs in SMEs. The formulated approach is constructed by using a SAAS based software i.e., work collaboration service (WCS), and SMEs as the elements of study. Where the WCS’s functionality is qualified to the collaboration needs that exist in operational and project work within SMEs. For this research constructivist approach and case study method is selected because the nature of the current study requires an in depth study of the work collaboration service as well as a detailed study of the work systems within different enterprises. Four different companies are selected in which fourteen interviews are conducted to gather data pertaining. The work systems method and framework are used as a central part of the approach to collect, analyze and interpret the enterprises work systems model and the underlying collaboration needs on operational and project work. On the other hand, the functional model of the WCS and its functionality is determined from functional model analysis, software testing, documentation and meetings with the service vendor. The enterprise work system model and the WCS model are compared to reveal how work progression differs between the two and make visible unaddressed stages of work progression. The WCS functionality is compared to work systems collaboration needs to ascertain if the service will suffice the needs of the project and operational work under study. The unaddressed needs provide opportunities to improve the functionality of the service for better conformity to the needs of enterprise and work. The results revealed that the functional models actually differed in how operational and project work progressed within the stages. WCS shared similar stages of work progression apart from the stages of identification and acceptance, and progress and completion stages were only partially addressed. Conclusion is that the identified unaddressed needs such as, single point of reference, SLA and OLA inclusion etc., should be implemented or improved within the WCS at appropriate stages of work to gain better compliance of the service to the needs of the enterprise an work itself. The developed approach can hence be used to carry out similar analysis for the conformance of pre-built software functionality to work system needs with SMEs.

Globalization of pharmaceutical R&D. Pharmaceutical R&D governance forms in People's Republic of China

Yrityksen selviytyminen ja menestyminen ovat riippuvaisia sen kyvystä innovoida, luoda tietoa ja hyödyntää tietämystä ja keksintöjä (Dunk ja Kilgore 2001). Yrityksen menestyminen erityisesti korkean teknologian alalla on siten suoraan riippuvainen sen T&T:stä, johon tehdyt investoinnit tuovat merkittäviä taloudellisia etuja yritykselle uusien tuotteiden, palveluiden ja prosessien muodossa (McEvily ja Chakravarthy 1999). Teknologinen etumatka ja sen tuotteistaminen innovatiivisiksi tarjoamiksi mahdollistaa monopolististen etujen saavuttamisen yrityksen kansainvälisessä kilpailussa (Lall 1977). Tämä kaltainen kilpailuetu voidaan saavuttaa yrityksen kyvyllä yhdistää maantieteellisesti hajautettu T&T:nsä tehokkaaksi verkostoksi (Porter 1986). Boehen (2008) mukaan T&T:n globalisoitumista voidaan johtaa eri hallintömuodoilla: T&T:n kansainvälistymisellä, T&T:n ulkomaille sijoittamisella ja T&T ulkomaille ulkoistamisella. T&T:n globalisoituminen on osa 2000-luvun taloudellista muutosta, ja sille on esitetty useita vaikuttavia tekijöitä, kuten kustannuserot, työvoimaresurssit, erityisosaamiskeskukset, paikallinen teknologia osaaminen ja kohdemarkkinoiden potentiaali (bardhan 2006; Norwood, ym. 2006; von Zedtwitz ja Gassmann 2002). Tutkimuksen on osoitettu eroavan tuotekehityksestä ja eri tekijöiden on osoitettu vaikuttavan niihin (von Zedtwitz ja Gassmann 2002; Leifer ja Triscari 1987). Samoin T&T on osoitettu olevan jatkumo perustavanlaatuisesta soveltavaan ja lääkekehityksen muodostavan vastaavan T&T jatkumon (Lall 1980; Iansiti 1993), jonka yksittäiset osat vaikuttavat sen hallintomuotoon. Tutkimus esittää eri tekijöitä voivan hyödyntää hallintomuodosta riippuen. Tätä tutkimusta varten tutkija haastatteli lääketeollisuuden johtajia Kiinassa vahvistaakseen tai hylätäkseen eri tekijöitä ja niiden suhdetta lääketeollisen T&T:n hallintomuotoihin. Markkinoiden todettiin olevan ensisijainen tekijä mutta myös kustannuserojen, insentiivien, työvoimaresurssien ja erityisosaamiskeskusten merkitys T&T:n globalisoitumiseen vaikuttavina tekijöinä vahvistettiin yhdessä perusvaatimusten ja riskitekijöiden kanssa. Tutkimuksessa vahvistetaan myös lääketeollisen T&T-jatkumon vaikutus ja esitetään viitekehys hallintomuodoille.

Globalization of pharmaceutical R&D Pharmaceutical R&D governance forms in People's Republic of China

Firm's survival and success, which are dependent on its ability to innovate, to create knowledge and to capitalize on inventions and know-how, is in essence directly linked to its R&D process (Dunk and Kilgore 2001). Especially in technology driven industries, such as the pharmaceuticals, there are significant positive returns to R&D investments through introduction of new or improved products and services (McEvily and Chakravarthy 1999). Technological lead and its transformation to innovative products as fruits of corporate R&D can be seen as monopolistic advantage that helps enterprises to compete in today’s market (Lall 1977). This competitive advantage can be derived from corporation's ability to integrate its activities across geographic locations (Porter 1986). According to Boehe (2008) globalization of R&D can executed with different governance forms: R&D internationalization, R&D offshoring or R&D offshore outsourcing. Globalization of R&D is intervened with the changes in global economy of the 21st century. Some studies argue for its influencing factors to be access to vast skilled labor pools and centers of excellence (Bardhan 2006). Other studies indicate the R&D cost differentials between countries to be the major expected benefit (Norwood et al. 2006). Von Zedtwitz and Gassmann (2002) presented benefits as divided to accessing markets and customers or to accessing local science and technology. This study proposes that based on governance form distinct factor derived benefits can be capitalized. To corroborate or refute factors and their relations on R&D globalization governance forms, an empirical study based on expert interviews of pharmaceutical directors was conducted in the People's Republic of China. The market was found to be the major influencing factor. Local requirements and adaptation were corroborated as factors connected with markets. Furthermore, influencing factors, such as labour, centers of excellence, cost, financial incentives were corroborated together with conditional and risk factors. Furthermore this research argues that the globalization of pharmaceutical R&D is dependent on the financial, scientific and operational requirements of the drug discovery stage. And thus establishes the influence of drug discovery's stages continuum on pharmaceutical R&D globalization. Finally, a R&D globalization governance form decision framework is proposed based on the frameworks presented in literature and author's corroborated empirical findings.

Solutions to water problems in the bottom of the pyramid market

Solving the water crisis in the developing world is a critical issue. Four billion people in the globe, so called the Base of the Pyramid (BoP) population suffer from inadequate access to safe drinking water, while millions die daily from waterborne diseases and lack of clean water. The BoP people desperately need to obtain a satisfactory access to safe water sources. In order to address the issue, this research has been carried out. To provide holistic consideration to the matter, comprehensive exploration of various causes of the water crisis and its impacts in developing countries were discussed. Then, various viable and relevant solutions to the problem have been thoroughly scrutinized, including scientific, rational, practical and speculative approaches, examination of existing methods, technologies and products at the BoP water market. The role of clean water to the sustainable development was specifically featured. The paper also has studied social and economic factors, actors and circumstances which affect the market development of clean water technologies in the BoP. Possibilities and potentials of successful business between foreign water enterprises and BoP consumers were considered, while primary obstacles are deliberated on, with suggestion of the ways to tackle them. Technologies and products which are needed by the poor must be affordable, sustainable and of an appropriate quality. The crucial question of technology transfer was soundly discussed with pointing out main hindrances on the way of its implementation between the developed and developing world. The means to overcome these barriers were properly observed as well. To explore to some extent the possibility and feasibility of technology transfer from Finland to the BoP sector, 3 case study analyses have been implemented. Personal discussions in form of interviews were conducted at Kemira, Outotec and Fenno Water, Finnish water treatment and supply enterprises. The results of the interviews shed light on the specific practical matters, actual obstacles and potential solutions of the technology transfer from Finland to low-income countries.

Managing the change of organizational culture in cross-border mergers and acquisitions: The role of post-acquisition integration in organizational culture change

Over the years, cross-border mergers and acquisitions have become a popular strategic option for variety of firms. Companies often seek rapid growth through acquiring potentially valuable enterprises or attempting to enhance their organization’s profitability by merging with other firms. However, managing the change of organizational culture is a major managerial challenge as companies often confront difficulties when merging two previously autonomous organizational cultures into one, joint organizational culture. Therefore, the purpose of this study is to increase understanding related to the challenges and possibilities concerning the management of organizational culture change in cross-border mergers and acquisitions. The research question “How to manage the change of organizational culture in cross-border mergers and acquisitions?” is analysed in relation to the theories presented in this thesis regarding organizational culture, organizational change and acculturation as well as in relation with the collected empirical data. The research question is divided into three sub-questions according to the following: (1) “What is the role of organizational culture in organizations?”, (2) “How to manage organizational change in mergers and acquisitions?” and (3) “How to manage organizational culture change through acculturation?”. The thesis is conducted as a qualitative case study research including three personal interviews and one group interview. The interviews were conducted as a combination of semi-structured and unstructured interviews. Theories related to organizational culture, the management of change as well as acculturation are studied and further analysed in relation to empirical material collected by the researcher. Research findings indicate that that several factors can influence the success of managing the organizational culture change in cross-border mergers and acquisitions. Factors such as defining the preferred acculturation model prior the merger; managing the resistance of change; open communication; acknowledgement of local culture and cultural differences; involvement of personnel in change processes; as well as the formulation and implementation of comprehensive change plans proved to be important factors with relation to successful management of organizational culture change

Development of a New Welding Product Quality Control and Management System Model for China

The Chinese welding industry is growing every year due to rapid development of the Chinese economy. Increasingly, companies around the world are looking to use Chinese enterprises as their cooperation partners. However, the Chinese welding industry also has its weaknesses, such as relatively low quality and weak management. A modern, advanced welding management system appropriate for local socio-economic conditions is required to enable Chinese enterprises to enhance further their business development. The thesis researches the design and implementation of a new welding quality management system for China. This new system is called ‗welding production quality control management model in China‘ (WQMC). Constructed on the basis of analysis of a survey and in-company interviews, the welding management system comprises the following different elements and perspectives: a ‗Localized congenital existing problem resolution strategies‘ (LCEPRS) database, a ‗human factor designed training system‘ (HFDT) training strategy, the theory of modular design, ISO 3834 requirements, total welding management (TWM), and lean manufacturing (LEAN) theory. The methods used in the research are literature review, questionnaires, interviews, and the author‘s model design experiences and observations, i.e. the approach is primarily qualitative and phenomenological. The thesis describes the design and implementation of a HFDT strategy in Chinese welding companies. Such training is an effective way to increase employees‘ awareness of quality and issues associated with quality assurance. The study identified widely existing problems in the Chinese welding industry and constructed a LCEPRS database that can be used in efforts to mitigate and avoid common problems. The work uses the theory of modular design, TWM and LEAN as tools for the implementation of the WQMC system.

Genetic variation and evolutionary divergence within and among populations, species, and genera of the Cambarinae

Seven crayfish species from three genera of the subfamily Cambarinae were electrophoretically examined for genetic variation at a total of twenty-six loci. Polymorphism was detected primarily at three loci: Ao-2, Lap, and Pgi. The average heterozygosities over-all loci for each species were found to be very low when compared to most other invertebrate species that have been examined electrophoretically. With the exception of Cambarus bartoni, the interpopulation genetic identities are high within any given species. The average interspecific identities are somewhat lower and the average intergeneric identities are lower still. Populations, species and genera conform to the expected taxonomic progression. The two samples of ~ bartoni show high genetic similarity at only 50 percent of the loci compared. Locus by locus identity comparisons among species yield U-shaped distributions of genetic identities. Construction of a phylogenetic dendrogram using species mean genetic distances values shows that species grouping is in agreement with morphological taxonomy with the exception of the high similarity between Orconectespropinquus and Procambarus pictus. This high similarity suggests the possibility of a regulatory change between the two species. It appears that the low heterozygosities, high interpopulation genetic identities, and taxonomic mispositioning can all be explained on the basis of low mutation rates.

The use of lichens as indicators of ambient air quality in Southern Ontario

The inverse relationship between arboreal lichen species richness and sulphur dioxide in ambient air has been thoroughly documented in the literature. Previous work in southern Ontario has shown that lichen bioindication can identify areas of potential concern regarding air quality. The EMAN suite of l i chens was applied in the City of Samia by surveying 458 Sugar Maple trees, in order to test the applicability of lichen bioindication under conditions of high mean S02 levels and high species richness values. The results of the survey were explored using Geographic Information Systems. A spatial relationship between lichen community variables, the Bluewater Bridge and the highway was identified. Lichen species richness, lichen percent cover and Index of Atmospheric Purity values were higher along the bridge and highway. No strong gradients were found between other known pollution sources and no lichen deserts were identified. The most common community grouping consisted of Physcia millegrana Degel, Candelaria concolor (Dicks) B. Stein, Physcia aipolia (Ehrh ex Humb.) Furnrohr; all of which are known nitrophytes. The relationship between substrate pH and lichen species richness was examined. Sites with a known source of anthropogenic chemical contamination were found to have a correlation of l=0.8 between lichen species richness and pH. The inverse was found for sites with no known source of contamination with a correlation of r 2 =-0.72. The findings suggest that species richness may be influenced by altering substrate pH which promotes the growth of nitrophytic species capable of tolerating high S02 levels.

A Study of One Living School Partnership

Abstract The purpose of this paper was to explore the ways one partnership evaluated its partners and relationships using Gray‟s model of collaboration (2000). The model consists of five approaches that are made up of: problem-focused, relational, cognitive, structural, and political. These approaches were tested at one „Living School‟ partnership that was constituted by a school, a public health department, the City‟s Park and Recreation Department, commercial enterprises, and organizations from the non-profit sector. Eight pre-arranged interviews were conducted using conversational interview technique, with three additional interviews on-site. The results of the research revealed that based on Gray‟s five approaches, this one Living School partnership was found to be successful. Consistent with partnership research, trust, social capital and structure were found to be key ingredients, as well as new themes of leadership, role clarity, and a shared vision were also found to be vital.

The Social Enterprise as an Alternative Work Option for Persons with Developmental Disabilities: A Case Study of Staff Perspectives at Common Ground Co-operative

Traditional employment options for persons with developmental disabilities are lacking. Employment options available for persons with developmental disabilities are reflective of the medical and social model perspectives of disability; with segregated and supported employment reinforcing the idea that persons with developmental disabilities are incapable and competitive employment missing the necessary accommodations for persons to be successful. This study examined social enterprises as an alternative employment option that can balance both medical and social model perspectives by accommodating for weaknesses or limitations and recognizing the strengths and capabilities of persons with developmental disabilities in the workplace. Moreover, this study is part of a broader case study which is examining the nature and impacts of a social enterprise, known as Common Ground Co-operative (CGC), which supports five social purpose businesses that are owned and operated by persons with developmental disabilities. This study is part of the Social Business and Marginalized Social Groups Community-University Research Alliance. To date, a case study has been written describing the nature and impacts of CGC and its related businesses from the perspectives of the Partners, board members, funders and staff (Owen, Readhead, Bishop, Hope & Campbell, in press & Readhead, 2012). The current study used a descriptive case study approach to provide a detailed account of the perceptions and opinions of CGC staff members who support each of the Partners in the five related businesses. Staff members were chosen for the focus of this study because of the integral role that they play in the successful outcomes of the persons they support. This study was conducted in two phases. In the first phase five staff members were interviewed. During this stage of interviews, several themes were presented which needed to be examined in further detail, specifically staff stress and burnout and duty of care for business Partners versus the promotion of their autonomy. A second phase of interviews was then conducted with one individual participant and a focus group of seven. During both interview phases, Staff participants described an employment model that creates a non-judgemental environment for the business Partners that promotes their strengths, accommodates for their limitations, provides educational opportunities and places the responsibility for the businesses on the persons with developmental disabilities cultivating equality and promoting independence. Staff described the nature of their role including risk factors for stress, the protective factors that buffer stress, and the challenges associated with balancing many role demands. Issues related to the replication of this social enterprise model are described.

Motivation and Reading Achievement: Understanding the Needs and Motivation Processes of Adult Literacy Learners

Adult struggling readers are understudied and most evidence-based remedial approaches target youth. This thesis examined relationships among motivation constructs across typical and struggling adult readers. Age was also investigated as a moderator in these relationships. Participants included 198 adults in adult basic education and 138 undergraduate students. Examining the influence of self-efficacy on reading achievement, moderation analyses indicated there were stronger relationships for typical readers. Furthermore, stronger relationships were found for younger participants when moderated by age. Additional regression analyses identified positive relationships between two measures of intrinsic motivation and reading value. This relationship was replicated for avoidance and value. Though age was not uniformly sampled across ability grouping, age did not account for these effects. Despite difficulties with reading, adults still exhibited motivation to engage with texts with equal to greater levels of reading value. Value and intrinsic motivation may have unique developmental courses associated with longstanding reading challenges.

Efficiency in Central Public Sector Enterprises in Kerala

For the analysis of productivity, capacity utilisation and profitability the data relating to the manufacturing central public sector enterprises in Kerala have been collected from the published annual reports of the companies, public enterprises surveys of Bureau of Public Enterprises (BPE), Economic Review of State Planning Board (SPB) and statistical review of central government enterprises by Centre for Monitoring Indian Economy (CMIE). Primary data have been collected by conducting personal interview with the high and middle level executives.

A Study of the impact of ISO 9001:2000 on Quality Management Practices in Selected Organisations in Kerala

The research work which was carried out to study the impact of ISO 9001: 2000, in selected organisations in Kerala, spread over various types of activities, such as fabrication of aero space hardware, glass ware, construction industries, health care units etc, encompassing, government and private enterprises, public sector undertakings, small and medium scale industries and research and development establishments. The ambience, work culture and collaboration prevalent in these organisations were varying on account of the environment in which they have been working. Fifty percent of the organizations selected for the study had obtained the ISO 900 I: 2000-certification since seven years or more. The process of study undertaken could invoke interest in the respondents, when a brief explanation on the purpose and need of the study was given to them prior to conducting the survey. There has been total cooperation from the management and the employees of all the organisations for the conduct of the study. Personal discussions were held with the senior management to draw their total support and involvement for the study.

Development of a New Transform:MRT

Fourier transform methods are employed heavily in digital signal processing. Discrete Fourier Transform (DFT) is among the most commonly used digital signal transforms. The exponential kernel of the DFT has the properties of symmetry and periodicity. Fast Fourier Transform (FFT) methods for fast DFT computation exploit these kernel properties in different ways. In this thesis, an approach of grouping data on the basis of the corresponding phase of the exponential kernel of the DFT is exploited to introduce a new digital signal transform, named the M-dimensional Real Transform (MRT), for l-D and 2-D signals. The new transform is developed using number theoretic principles as regards its specific features. A few properties of the transform are explored, and an inverse transform presented. A fundamental assumption is that the size of the input signal be even. The transform computation involves only real additions. The MRT is an integer-to-integer transform. There are two kinds of redundancy, complete redundancy & derived redundancy, in MRT. Redundancy is analyzed and removed to arrive at a more compact version called the Unique MRT (UMRT). l-D UMRT is a non-expansive transform for all signal sizes, while the 2-D UMRT is non-expansive for signal sizes that are powers of 2. The 2-D UMRT is applied in image processing applications like image compression and orientation analysis. The MRT & UMRT, being general transforms, will find potential applications in various fields of signal and image processing.

Marketing orientation of small Firms- a study with reference to Trivandrum district

The small business has attracted very little attention of the historians in the ancient times, or public mind inspite of the fact that its impact on the various civilisations has been phenominal. Even in recent times economists considered the small firms as inappropriate, obselate and anacronistic as it cannot assimilate the full potential of technological change in the production system. But today everybody agrees that the small business has a definite role in shaping the human destiny and enhancing the quality of life in any society. In a developing country like India small firms are necessary to generate employment for millions, high standared of personal choice to consumers, provide competition and act as a check to monopoly power; further the small firms provide an important source of innovation and in turn it paves the way for entrepreneur development in the society. In many countries the small enterprises played a significant role in the growth and development of their economic system. Italy and Japan are quoted as classic examples . In India, too, with the abundance of labour and scarce capital resources small firms have been promoted and protected by the government. But one must say that the small firm owners/managers in India have been shy in developing a market orientation in themeselves. Due to this many firms failed and closed. The alarming rate of sickness among the small firms in India may be attributed to the lack of market driven/customer orientation approach among the owner/managers of small business. So the study on the market oreintation of the small firms has never been in the mind of marketing experts and academicians. Thus, an attempt is made to enquire into them systematically and scientifically. For the study, Trivandrum district in Kerala has been selected. The data for the study has been collected by the help of a schedule which has been prepared after consulting the relevant literature and after consultation with experts in the field, academicians and practising managers.