Electricity markets modeling considering complex contracts and aggregators

All over the world, the liberalization of electricity markets, which follows different paradigms, has created new challenges for those involved in this sector. In order to respond to these challenges, electric power systems suffered a significant restructuring in its mode of operation and planning. This restructuring resulted in a considerable increase of the electric sector competitiveness. Particularly, the Ancillary Services (AS) market has been target of constant renovations in its operation mode as it is a targeted market for the trading of services, which have as main objective to ensure the operation of electric power systems with appropriate levels of stability, safety, quality, equity and competitiveness. In this way, with the increasing penetration of distributed energy resources including distributed generation, demand response, storage units and electric vehicles, it is essential to develop new smarter and hierarchical methods of operation of electric power systems. As these resources are mostly connected to the distribution network, it is important to consider the introduction of this kind of resources in AS delivery in order to achieve greater reliability and cost efficiency of electrical power systems operation. The main contribution of this work is the design and development of mechanisms and methodologies of AS market and for energy and AS joint market, considering different management entities of transmission and distribution networks. Several models developed in this work consider the most common AS in the liberalized market environment: Regulation Down; Regulation Up; Spinning Reserve and Non-Spinning Reserve. The presented models consider different rules and ways of operation, such as the division of market by network areas, which allows the congestion management of interconnections between areas; or the ancillary service cascading process, which allows the replacement of AS of superior quality by lower quality of AS, ensuring a better economic performance of the market. A major contribution of this work is the development an innovative methodology of market clearing process to be used in the energy and AS joint market, able to ensure viable and feasible solutions in markets, where there are technical constraints in the transmission network involving its division into areas or regions. The proposed method is based on the determination of Bialek topological factors and considers the contribution of the dispatch for all services of increase of generation (energy, Regulation Up, Spinning and Non-Spinning reserves) in network congestion. The use of Bialek factors in each iteration of the proposed methodology allows limiting the bids in the market while ensuring that the solution is feasible in any context of system operation. Another important contribution of this work is the model of the contribution of distributed energy resources in the ancillary services. In this way, a Virtual Power Player (VPP) is considered in order to aggregate, manage and interact with distributed energy resources. The VPP manages all the agents aggregated, being able to supply AS to the system operator, with the main purpose of participation in electricity market. In order to ensure their participation in the AS, the VPP should have a set of contracts with the agents that include a set of diversified and adapted rules to each kind of distributed resource. All methodologies developed and implemented in this work have been integrated into the MASCEM simulator, which is a simulator based on a multi-agent system that allows to study complex operation of electricity markets. In this way, the developed methodologies allow the simulator to cover more operation contexts of the present and future of the electricity market. In this way, this dissertation offers a huge contribution to the AS market simulation, based on models and mechanisms currently used in several real markets, as well as the introduction of innovative methodologies of market clearing process on the energy and AS joint market. This dissertation presents five case studies; each one consists of multiple scenarios. The first case study illustrates the application of AS market simulation considering several bids of market players. The energy and ancillary services joint market simulation is exposed in the second case study. In the third case study it is developed a comparison between the simulation of the joint market methodology, in which the player bids to the ancillary services is considered by network areas and a reference methodology. The fourth case study presents the simulation of joint market methodology based on Bialek topological distribution factors applied to transmission network with 7 buses managed by a TSO. The last case study presents a joint market model simulation which considers the aggregation of small players to a VPP, as well as complex contracts related to these entities. The case study comprises a distribution network with 33 buses managed by VPP, which comprises several kinds of distributed resources, such as photovoltaic, CHP, fuel cells, wind turbines, biomass, small hydro, municipal solid waste, demand response, and storage units.

Desenvolvimento de um oxímetro de pulso e de um sensor de medição de pressão arterial

Dissertação para obtenção do Grau de Mestre em Engenharia Biomédica

Clinical-epidemiological study of leptospirosis in humans and reservoirs in Yucatán, México

A leptospirosis clinical-epidemiological study was made in humans and reservoirs in the state of Yucatán, México. Interviews and serological analyses were made on 400 persons from an open population, 439 probable cases of leptospirosis and 1060 animal reservoirs (cows, pigs, dogs, rats and opossums). IgM Leptospira DipstickTM and Microscopic Agglutination Test (MAT) was used to detect human antibodies to leptospiras and serovar respectively. Leptospirosis incidence in humans was 2.2/100,000 inhab. in 1998, 0.7/100,000 in 1999 and 0.9/100,000 in 2000. Overall seroprevalence was 14.2%, relatively unchanged from seroprevalences observed 20 years ago. Highest seropositivity was found in people over 56 years of age, predominating males over females. Predominant serovars in the open population were tarassovi, hardjo, pomona and panama. Leptospirosis cases were most frequent in rural areas, and the anicteric course predominated over the icteric. The panama, icterohaemorrhagiae and pomona serovars predominated in both anicteric and icteric courses. Dogs, pigs and rodents had the highest seropositivity among the reservoirs. Contact with rodents and natural water sources were significant factors (p £ 0.05). Human cases (74%) occurred during the rainy season. It is concluded that leptospirosis is still a serious illness with important clinical and epidemiological implications in the state of Yucatán, Mexico.

SIGREDES. Cadastro das redes de saneamento e abastecimento dos aglomerados urbanos da CIMAC.

Dissertação apresentada como requisito parcial para obtenção do grau de Mestre em Ciência e Sistemas de Informação Geográfica.

A framework for using real data with distributed low cost sensors

Currently, due to the widespread use of computers and the internet, students are trading libraries for the World Wide Web and laboratories with simulation programs. In most courses, simulators are made available to students and can be used to proof theoretical results or to test a developing hardware/product. Although this is an interesting solution: low cost, easy and fast way to perform some courses work, it has indeed major disadvantages. As everything is currently being done with/in a computer, the students are loosing the “feel” of the real values of the magnitudes. For instance in engineering studies, and mainly in the first years, students need to learn electronics, algorithmic, mathematics and physics. All of these areas can use numerical analysis software, simulation software or spreadsheets and in the majority of the cases data used is either simulated or random numbers, but real data could be used instead. For example, if a course uses numerical analysis software and needs a dataset, the students can learn to manipulate arrays. Also, when using the spreadsheets to build graphics, instead of using a random table, students could use a real dataset based, for instance, in the room temperature and its variation across the day. In this work we present a framework which uses a simple interface allowing it to be used by different courses where the computers are the teaching/learning process in order to give a more realistic feeling to students by using real data. A framework is proposed based on a set of low cost sensors for different physical magnitudes, e.g. temperature, light, wind speed, which are connected to a central server, that the students have access with an Ethernet protocol or are connected directly to the student computer/laptop. These sensors use the communication ports available such as: serial ports, parallel ports, Ethernet or Universal Serial Bus (USB). Since a central server is used, the students are encouraged to use sensor values results in their different courses and consequently in different types of software such as: numerical analysis tools, spreadsheets or simply inside any programming language when a dataset is needed. In order to do this, small pieces of hardware were developed containing at least one sensor using different types of computer communication. As long as the sensors are attached in a server connected to the internet, these tools can also be shared between different schools. This allows sensors that aren't available in a determined school to be used by getting the values from other places that are sharing them. Another remark is that students in the more advanced years and (theoretically) more know how, can use the courses that have some affinities with electronic development to build new sensor pieces and expand the framework further. The final solution provided is very interesting, low cost, simple to develop, allowing flexibility of resources by using the same materials in several courses bringing real world data into the students computer works.

Manoeuvre Based Mission Control System for an Autonomous Surface Vehicle

In this work the mission control and supervision system developed for the ROAZ Autonomous Surface Vehicle is presented. Complexity in mission requirements coupled with flexibility lead to the design of a modular hierarchical mission control system based on hybrid systems control. Monitoring and supervision control for a vehicle such as ROAZ mission is not an easy task using tools with low complexity and yet powerful enough. A set of tools were developed to perform both on board mission control and remote planning and supervision. “ROAZ- Mission Control” was developed to be used in support to bathymetric and security missions performed in river and at seas.

Radar Based Collision detection developments on USV ROAZ II

This work presents the integration of obstacle detection and analysis capabilities in a coherent and advanced C&C framework allowing mixed-mode control in unmanned surface systems. The collision avoidance work has been successfully integrated in an operational autonomous surface vehicle and demonstrated in real operational conditions. We present the collision avoidance system, the ROAZ autonomous surface vehicle and the results obtained at sea tests. Limitations of current COTS radar systems are also discussed and further research directions are proposed towards the development and integration of advanced collision avoidance systems taking in account the different requirements in unmanned surface vehicles.

ROAZ and ROAZ II Autonomous Surface Vehicle Design and Implementation

International Lifesaving Congress 2007, La Coruna, Spain, December, 2007

Forest fire detection with a small fixed wing autonomous aerial vehicle

In this work a forest fire detection solution using small autonomous aerial vehicles is proposed. The FALCOS unmanned aerial vehicle developed for remote-monitoring purposes is described. This is a small size UAV with onboard vision processing and autonomous flight capabilities. A set of custom developed navigation sensors was developed for the vehicle. Fire detection is performed through the use of low cost digital cameras and near-infrared sensors. Test results for navigation and ignition detection in real scenario are presented.

ROAZ Autonomous Surface Vehicle Design and Implementation

The design of an Autonomous Surface Vehicle for operation in river and estuarine scenarios is presented. Multiple operations with autonomous underwater vehicles and support to AUV missions are one of the main design goals in the ROAZ system. The mechanical design issues are discussed. Hardware, software and implementation status are described along with the control and navigation system architecture. Some preliminary test results concerning a custom developed thruster are presented along with hydrodynamic drag calculations by the use of computer fluid dynamic methods.

Autonomous Surface Vehicle Docking Manoeuvre with Visual Information

This work presents a hybrid coordinated manoeuvre for docking an autonomous surface vehicle with an autonomous underwater vehicle. The control manoeuvre uses visual information to estimate the AUV relative position and attitude in relation to the ASV and steers the ASV in order to dock with the AUV. The AUV is assumed to be at surface with only a small fraction of its volume visible. The system implemented in the autonomous surface vehicle ROAZ, developed by LSA-ISEP to perform missions in river environment, test autonomous AUV docking capabilities and multiple AUV/ASV coordinated missions is presented. Information from a low cost embedded robotics vision system (LSAVision), along with inertial navigation sensors is fused in an extended Kalman filter and used to determine AUV relative position and orientation to the surface vehicle The real time vision processing system is described and results are presented in operational scenario.

Marine Operations with the SWORDFISH Autonomous Surface Vehicle

IEEE Robótica 2007 - 7th Conference on Mobile Robots and Competitions, Paderne, Portugal 2007

Erythema induratum of Bazin and renal tuberculosis: report of an association

Erythema induratum of Bazin is a disease that usually affects women, in whom erythematous subcutaneous nodules and plaques appear on the posterior part of the lower extremities, some of which ulcerate. In many countries, tuberculosis is still the main etiologic factor. We report a case of a 40-year-old woman who presented a course of protracted and recurrent episodes over five years of cutaneous lesions on her legs. These tend to involute, but new crops appear at irregular intervals. It was painful, erythematous-violaceous nodules, some of which drained a reddish secretion. The histopathologic features of the lesions demonstrated inflammatory infiltration, with predominance of neutrophils in dermis and hypodermis, necrotizing vasculitis in the arterioles and septal fibrosis. There was no granuloma. The Ziehl-Neelsen stain did not revealed acid-fast bacilli, and the culture of biopsy specimen was negative. The tuberculin skin test was strongly positive (17 mm). The chest X-ray was normal. Few months later she presented adynamia and urinary complaints, such as polacyuria and dysuria. It has been done an urynalysis, which demonstrated acid pH urine, sterile pyuria and microscopic hematuria. It was then raised the diagnostic hypothesis of renal tuberculosis. The urine culture for M. tuberculosis was positive in two out of ten samples. The treatment was instituted with rifampin, isoniazid and pyrazinamide, with complete regression. This case illustrates a clear association between erythema induratum and renal tuberculosis, demonstrated by the remission of the cutaneous lesions after the treatment of the renal tuberculosis.

"Não nos deixem dormir...": Projeto de intervenção num Centro de Dia

O presente relatório apresenta o projeto desenvolvido na Casa-Acolhimento Santa Marta, cuja finalidade era a promoção de um envelhecimento ativo e bem-sucedido com vista à melhoria da qualidade de vida das pessoas idosas que frequentam a resposta social de Centro de Dia. O conhecimento coconstruído com as pessoas idosas e os profissionais da instituição permitiu a conceção e o desenvolvimento do projeto “Não nos deixem dormir…”. Sendo um projeto, elaborado em conjunto com os indivíduos, privilegiou os pressupostos da metodologia de investigação-ação participativa. Inerente a este posicionamento, incentivando a exploração e a rentabilização dos recursos e das potencialidades endógenas, bem como procurando atenuar ou resolver os problemas e as necessidades subjacentes, procurou-se tornar os sujeitos atores e autores das suas vidas. Deste modo, partindo dos contributos e das necessidades dos idosos o projeto justifica a sua importância, designadamente pela realização de ações que proporcionaram um maior número de atividades de acordo com as suas expectativas e os seus interesses e que promoveram as relações interpessoais propiciando momentos de convívio e de diálogo, fomentando o auto e o hétero conhecimento, bem como o respeito mútuo entre os idosos. De forma a sustentar a investigação e a intervenção, mobilizou-se contributos teóricos ligados sobretudo à terceira idade, que se tornaram essenciais na problematização, na reflexão e na ação. A concretização do projeto permitiu ainda uma constante reflexão acerca do papel do Educador Social junto da população idosa, bem como da pertinência da sua presença neste âmbito de intervenção.