Incorporação do lodo de tanque séptico como matéria-prima de uma mistura asfáltica

In Natal/RN, 68% of the population uses some kind of individual system for their domestic sewers treatment, being that the most used it is septic tank, followed by sumidouro. Every treatment system of sewers, usually used, generates a by-product denominated sludge. That residue presents some components, in its constitution, undesirable under the environmental and sanitary point of view. In such case, to assure that the system treatment has satisfactory results, it is necessary to do the adjusted disposition of the sludge sewage. Several countries are looking for technical alternatives for the use and disposition of residues. Under technical and environmental conditions appropriate, these materials can be used, decreasing the consumption of the natural resources and the treatment need, storage or elimination of the wastes, what decrease the risks created. Some of the alternatives of recycling of the sludge sewage are: the application in the agriculture, in the production of energy and as raw material in the civil construction. This study evaluated asphalt mixtures behavior that partially substituted conventional aggregates by septic tank sludge. The septic tank sludge gave origin to two raw materials called raw sludge and sludge ash. The raw sludge was put as a small aggregate and the sludge ash as filler. In the first experiment it was made a comparison between the mixture with conventional aggregates and the mixtures that replaced sand by raw sludge in the proportions from 5% to 40%. In the second experiment, it was made comparison between mixtures with 1%, 2% and 3% of sludge ash and cement. The stages developed along the study were: physical characterization of the conventional materials; physical, chemistry, thermal, mineralogical characterizations and analysis of environmental risk of the raw sludge; physical characterization and analysis of environmental risk of the sludge ash; analysis of the mixtures performance through its volumetric and mechanical characteristics; forecast of the mixtures susceptibility in the moisture presence. For the grain size composition used and with the percentage asphalt adopted, the mixtures with up to 7,5% of raw sludge in his composition attend to the National Department of Transports Infrastructure (DNIT) specifications. However, in agreement with the mixtures susceptibility in the moisture presence, the mixtures with addition of raw sludge don't present satisfactory acting. In such case, they could be used in arid and semi-arid areas. The raw sludge application in mixtures increased their voids volume and their stability. However, it damaged mixtures adhesiveness. Mixtures with sludge ash and with cement presented similar behavior. However, mixtures with sludge ash presented a better performance than mixtures with cement as for their stability and their tensile strength ratio. The mixture with 1% of sludge ash is better. The wastes studied don't represent environmental risk

Pyrolysis and combustion of pulp mill lime sludge

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Recycling of glass cullet as aggregate for clays used to produce roof tiles

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Gerenciamento de resíduos sólidos urbanos em Tarumã e Teodoro Sampaio - SP

Nesta pesquisa estabeleceu-se como objetivo geral analisar a gestão dos resíduos sólidos domiciliares gerados nas cidades de Tarumã e Teodoro Sampaio-SP, com a finalidade de propor ações para o gerenciamento integrado dos resíduos sólidos urbanos. Foram investigados a geração, o tratamento e a destinação dos resíduos sólidos domiciliares, além daqueles gerados no processo de produção da Usina de Açúcar e Álcool Nova América, e sua participação na vida econômica da Usina de Triagem e Compostagem de Tarumã. Esta pesquisa permitiu compreender a importância de uma gestão integrada dos resíduos sólidos visando a combater e minimizar impactos ambientais associados aos mesmos, bem como enfatizar a necessidade de articular a usina de triagem de resíduos sólidos domiciliares com a coleta seletiva em Tarumã e viabilizar a coleta seletiva em Teodoro Sampaio, garantindo assim, ganhos sociais, operacionais, econômicos, educacionais e ambientais para os municípios.

Recovery of silver residues from dental amalgam

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Aplicação integrada de métodos geofísicos em uma área de disposição de resíduos sólidos urbanos em Bauru-SP

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Case study: a 3D resistivity and induced polarization imaging from downstream a waste disposal site in Brazil

A contaminated site from a downstream municipal solid waste disposal site in Brazil was investigated by using a 3D resistivity and induced polarization (IP) imaging technique. This investigation purpose was to detect and delineate contamination plume produced by wastes. The area was selected based on previous geophysical investigations, and chemical analyses carried out in the site, indicating the presence of a contamination plume in the area. Resistivity model has successfully imaged waste presence (rho < 20 Omega m), water table depth, and groundwater flow direction. A conductive anomaly (rho < 20 Omega m) outside wastes placement was interpreted as a contamination plume. Chargeability model was also able to imaging waste presence (m > 31 mV/V), water table depth, and groundwater flow direction. A higher chargeability zone (m > 31 mV/V) outside wastes placement and following conductive anomaly was interpreted as a contamination plume. Normalized chargeability (MN = m/rho) confirmed polarizable zone, which could be an effect of a salinity increase (contamination plume), and the clay presence in the environment.

Thin films generated by plasma immersion ion implantation and deposition of hexamethyldisilazane mixed with nitrogen in different proportions

In this work, it was used a plasma system composed of a cylindrical stainless steel reactor, a radio-frequency (13.56MHz) power source fixed at either 25 W or 70 W, a power source with a negative bias of 10kV and a 100Hz pulse. The system worked at an operational pressure of 80mTorr which consisted of varying concentrations of the monomer HMDSN and gaseous nitrogen in ratios: HMDSN (mTorr)/nitrogen (mTorr) from 70/10 to 20/60 in terms of operational pressure. The structural characterization of the films was done by FTIR spectroscopy. Absorptions were observed between 3500 cm(-1) to 3200 cm(-1), 3000 cm(-1) to 2900 cm(-1), 2500 cm(-1) to 2000 cm(-1), 1500 cm(-1) to 700 cm(-1), corresponding, respectively, to OH radicals, C-H stretching bonds in CH2 and CH3 molecules, C-N bonds, and finally, strain C-H bonds, Si-CH3 and Si-N groups, for both the 70 W and the 25 W. The contact angle for water was approximately 100 degrees and the surface energy is near 25mJ/m(2) which represents a hydrophobic surface, measured by goniometric method. The aging of the film was also analyzed by measuring the contact angle over a period of time. The stabilization was observed after 4 weeks. The refractive index of these materials presents values from 1.73 to 1.65 measured by ultraviolet-visible technique.

Análise dos Processos de Flotação e Oxidação Avançada para o Tratamento de Efluente Modelo da Indústria do Petróleo

The generation of wastes in most industrial process is inevitable. In the petroleum industry, one of the greatest problems for the environment is the huge amount of produced water generated in the oil fields. This wastewater is a complex mixture and present great amounts. These effluents can be hazardous to the environmental without adequate treatment. This research is focused in the analysis of the efficiencies of the flotation and photo-oxidation processes to remove and decompose the organic compounds present in the produced water. A series of surfactants derivated from the laurilic alcohol was utilized in the flotation to promote the separation. The experiments have been performed with a synthetic wastewater, carefully prepared with xylene. The experimental data obtained using flotation presented a first order kinetic, identified by the quality of the linear data fitting. The best conditions were found at 0.029 g.L-1 for the surfactant EO 7, 0.05 g.L-1 for EO 8, 0.07 g.L-1 for EO 9, 0.045 g.L-1 for EO 10 and 0.08 g.L-1 for EO 23 with the following estimated kinetic constants: 0.1765, 0.1325, 0.1210, 0.1531 and 0.1699 min-1, respectively. For the series studied, the most suitablesurfactant was the EO 7 due to the lower reagent consumption, higher separation rate constant and higher removal efficiency of xylene in the aqueous phase (98%). Similarly to the flotation, the photo-Fenton process shows to be efficient for degradation of xylene and promoting the mineralization of the organic charge around 90% and 100% in 90 min

Utilização de uma coluna de flotação para remoção de compostos orgânicos da água de produção

Innovative technologies using surfactant materials have applicability in several industrial fields, including petroleum and gas areas. This study seeks to investigate the use of a surfactant derived from coconut oil (SCO saponified coconut oil) in the recovery process of organic compounds that are present in oily effluents from petroleum industry. For this end, experiments were accomplished in a column of small dimension objectifying to verify the influence of the surfactant SCO in the efficiency of oil removal. This way, they were prepared emulsions with amount it fastens of oil (50, 100, 200 and 400 ppm), being determined the great concentrations of surfactant for each one of them. Some rehearsals were still accomplished with produced water of the industry of the petroleum to compare the result with the one of the emulsions. According to the experiments, it was verified that an increase of the surfactant concentration does not implicate in a greater oil removal. The separation process use gaseous bubbles formed when a gas stream pass a liquid column, when low surfactant concentrations are used, it occurs the coalescence of the dispersed oil droplets and their transport to the top of the column, forming a new continuous phase. Such surfactants lead to a gas-liquid interface saturation, depending on the used surfactant concentration, affecting the flotation process and influencing in the removal capacity of the oily dispersed phase. A porous plate filter, with pore size varying from 40 to 250 mm, was placed at the base of the column to allow a hydrodynamic stable operation. During the experimental procedures, the operating volume of phase liquid was held constant and the rate of air flow varied in each experiment. The resulting experimental of the study hydrodynamic demonstrated what the capturing of the oil was influenced by diameter of the bubbles and air flow. With the increase flow of 300 about to 900 cm3.min-1, occurred an increase in the removal of oil phase of 44% about to 66% and the removal kinetic of oil was defined as a reaction of 1° order.

Combinações de fontes de nitrogênio no desenvolvimento e rendimento do feijoeiro

O nitrogênio é um dos nutrientes de planta mais lixiviados no solo, sendo, também, perdido na forma gasosa, o que pode limitar o rendimento de muitas culturas. Neste sentido, este trabalho objetivou estudar o efeito de combinações de fontes de N (ureia e sulfato de amônio), na dose de 80 kg ha-1, em aplicação isolada ou em mistura, com ou sem incorporação ao solo de água de irrigação, sobre a produção e os componentes de rendimento da cultura do feijoeiro. O trabalho foi realizado no município de Selvíria (MS), em dois anos agrícolas (2003 e 2004), no período de inverno. Adotou-se o delineamento em blocos ao acaso, com 12 tratamentos dispostos em esquema fatorial 6x2, com quatro repetições. Os tratamentos foram constituídos por seis combinações de fontes de nitrogênio: testemunha - sem N; 80 kg ha-1 de N - sulfato de amônio (SA); 20 kg ha-1 de N - ureia (U) + 60 kg ha-1 de N (SA); 40 kg ha-1 de N (U) + 40 kg ha-1 de N (SA); 60 kg ha-1 de N (U) + 20 kg ha-1 de N (SA); e 80 kg ha-1 de N (U), aplicadas com e sem água de irrigação. Verificou-se que o fornecimento de nitrogênio, independentemente da fonte utilizada, propiciou aumento na produtividade de grãos. Não houve diferença entre a incorporação ou não do fertilizante nitrogenado ao solo com água de irrigação.

Efeito de lodo de esgoto na fertilidade de um Argissolo Vermelho-Amarelo cultivado com cana-de-açúcar

O objetivo deste trabalho foi avaliar os efeitos da aplicação de 0, 20 e 40 Mg ha-1 de lodo de esgoto, na presença e ausência de fertilizante mineral (NPK) na fertilidade e nos teores de metais pesados de um Argissolo Vermelho-Amarelo distrófico, cultivado com cana-de-açúcar. Amostras de solo foram coletadas aos 146, 272 e 484 dias após o plantio da cultura de cana-de-açúcar e foram submetidas à análise de fertilidade pelo método do Instituto Agronômico de Campinas, incluindo a determinação do S, Cr, Cd, Cu, Fe, Mn, Pb e Zn. O lodo de esgoto diminuiu a acidez do solo e forneceu Ca, P, S e Zn, principalmente. Seus efeitos foram de curta duração, restringindo-se a um ano agrícola. Os teores dos metais pesados das amostras de solo tratado foram maiores que os da testemunha, mas menores que os valores considerados perigosos ao ambiente.

A saúde ambiental e os resíduos de serviços de saúde nos três níveis de complexidade do Sistema Único de Saúde - SUS

The environmental management in the health establishments is a reality still little explored in the health sector in Brazil, especially concerning its wastes. The management of wastes of health services is established in the valid legislation through the National Council of Environment and Sanitary Vigilance Agency (358/2005 and 304/2004 respectively). The present work is about a descriptive work about the environmental health in the health services. The used criterion was to diagnose the environmental management in twelve establishments of health inserted in the three levels of complexity of the Unique Health System (Sistema Ùnico de Saúde SUS). Among the sub criteria used the waste management is the one of bigger concern. The one referring to the water quality is considered good. The analysis of data reveals that 66% of the establishments got a poor environmental ranking, 17% critical and 17% appropriate, showing that the health establishments in the three levels of complexity of the SUS need urgent structural, environmental and educational interventions

Desenvolvendo e gerenciando compostagem de resíduos sólidos urbanos: para geração de renda e repasse de tecnologia à acrevi

Nowadays, as well as in the past decades, the dumping of biodegradable organic waste in landfill is common practice in Brazil, as well as in most parts of the world. Nevertheless due to its rapid decomposition and release of odors, this practice hamper’s the operation and implementation of a recycling system. These facts encouraged our research to find an efficient system for the management of organic waste, not only for the use of official workers responsible for managing these wastes, but also for non-governmental institutions. The Recycling for Life Community Association – ACREVI (Associação Comunitária Reciclando para a Vida), together with the municipal authorities of Mossoró-RN, Brazil, have assumed the social role of collecting and recycling solid waste produced by most of the local population. However, it was observed that the organic waste it collected was not receiving any treatment. This present work aims to make compost with mixed waste (green waste and organic household), and then do chemical analysis of the material in view to use the waste as organic fertilizer. The objective being: to share the knowledge acquired by putting it into a very simple language accessible to people with little education. The experiment was conducted at ACREVI, Mossoró (RN), and the compost was obtained following the method "windrow", forming three cells (I, II, III) with conical shape, dimensions of 1.6 meters and 2.0 meters in diameter for cells I and II, and 1.0 meters high and 2.0 meters in diameter for cell III. The process was accompanied by analysis: CHN elemental, a variation of cell temperature, humidity, pH, TKN, bulk density, nutrients and heavy metals. Stabilized organic compounds reached the C/N ratio of 10.4/1 cell I and 10.4/1 in the cell II in the cell, showing how good soil conditions, with potential to improve the physical properties of any soil and pH acid soils, has presented the cell III at the end of the process the C/N 26/1, is a high ratio may be associated with the stack size III, thus changing the optimal conditions for the occurrence of the process. The levels of heavy metals in the analyzed compounds were lower than those established by the SDA normative instruction, Nº 27, of 5 June, 2006. The use of pruning trees and grass are used in small-scale composting, while generating a quality compost in the final process, it also created an important condition for a correct sizing of the composting piles. Under the studied conditions it is not advisable to use cells with a height of 1.00 m in height and 2.00 m in diameter, as these do not prevent the rapid dissipation of heat and thus can not be a good product at the end of composting. The composting process in the shed of the association and the preparation of the primer enabled the development of an alternative technology to generate income for members of ACREVI.

Crescimento e índices de troca gasosa em plantas de pepino irrigadas com água enriquecida com CO2

Avaliou-se o efeito do enriquecimento da água de irrigação com CO2 sobre índices fisiológicos de desenvolvimento e troca gasosa de folhas de plantas de pepino do tipo japonês, cultivados em ambiente protegido. Os experimentos realizados em duas épocas do ano foram instalados em delineamento experimental de blocos ao acaso com 4 tratamentos e 5 repetições. Os tratamentos foram constituídos pelos híbridos Hokuho e Tsuyataro, irrigados com água comum ou enriquecida com CO2, em uma concentração de 1 no primeiro e 0,25 no segundo experimento. A produção de massa de material seco e área foliar adotaram tendência exponencial, não sendo possível observar o início da diminuição da taxa de produção de massa do material seco aos 63 dias após transplante (DAT). A taxa de crescimento da comunidade e taxa de crescimento relativa do híbrido Hokuho irrigado com água comum foi diferente do irrigado com água enriquecida com CO2, no entanto, no híbrido Tsuyataro foram semelhantes. A taxa de assimilação líquida atingiu a máxima pendente na fase de crescimento vegetativo e floração, e foi reduzida drasticamente após os 20 DAT no híbrido Hokuho, e após os 35 DAT no híbrido Tsuyataro. A razão de área foliar diminuiu ligeiramente nos dois híbridos com o desenvolvimento do cultivo. No início observaram-se diferenças entre irrigação com água comum e enriquecida com CO2, porém após 20 DAT não se apreciaram mais diferenças. Quanto a troca gasosa, a taxa assimilatória líquida de CO2 e de transpiração, conductância estomática e eficiência no uso da água foram semelhantes entre plantas irrigadas com água comum e enriquecida com CO2 durante o primeiro semestre. Já no segundo semestre, maiores valores foram registrados pelas plantas irrigadas com água enriquecida.