A novel bogie design made of glass fibre reinforced plastic

This paper presents a completely new design of a bogie-frame made of glass fibre reinforced composites and its performance under various loading conditions predicted by finite element analysis. The bogie consists of two frames, with one placed on top of the other, and two axle ties connecting the axles. Each frame consists of two side arms and a transom between. The top frame is thinner and more compliant and has a higher curvature compared with the bottom frame. Variable vertical stiffness can be achieved before and after the contact between the two frames at the central section of the bogie to cope with different load levels. Finite element analysis played a very important role in the design of this structure. Stiffness and stress levels of the full scale bogie presented in this paper under various loading conditions have been predicted by using Marc provided by MSC Software. In order to verify the finite element analysis (FEA) models, a fifth scale prototype of the bogie has been made and tested under quasi-static loading conditions. Results of testing on the fifth scale bogie have been used to fine tune details like contact and friction in the fifth scale FEA models. These conditions were then applied to the full scale models. Finite element analysis results show that the stress levels in all directions are low compared with material strengths.

An enhanced model for small-signal analysis of the phase-shifted full-bridge converter

This paper presents an in-depth critical discussion and derivation of a detailed small-signal analysis of the Phase-Shifted Full-Bridge (PSFB) converter. Circuit parasitics, resonant inductance and transformer turns ratio have all been taken into account in the evaluation of this topology’s open-loop control-to-output, line-to-output and load-to-output transfer functions. Accordingly, the significant impact of losses and resonant inductance on the converter’s transfer functions is highlighted. The enhanced dynamic model proposed in this paper enables the correct design of the converter compensator, including the effect of parasitics on the dynamic behavior of the PSFB converter. Detailed experimental results for a real-life 36V-to-14V/10A PSFB industrial application show excellent agreement with the predictions from the model proposed herein.1

Structure-based energetics of protein interfaces guides foot-and-mouth disease virus vaccine design

Virus capsids are primed for disassembly, yet capsid integrity is key to generating a protective immune response. Foot-and-mouth disease virus (FMDV) capsids comprise identical pentameric protein subunits held together by tenuous noncovalent interactions and are often unstable. Chemically inactivated or recombinant empty capsids, which could form the basis of future vaccines, are even less stable than live virus. Here we devised a computational method to assess the relative stability of protein-protein interfaces and used it to design improved candidate vaccines for two poorly stable, but globally important, serotypes of FMDV: O and SAT2. We used a restrained molecular dynamics strategy to rank mutations predicted to strengthen the pentamer interfaces and applied the results to produce stabilized capsids. Structural analyses and stability assays confirmed the predictions, and vaccinated animals generated improved neutralizing-antibody responses to stabilized particles compared to parental viruses and wild-type capsids.

Designing in caves: using immersive visualisations in design practice

This paper describes a study of the use of immersive Virtual reality technologies in the design of a new hospital. It uses Schön’s concept of reflective practice and video-based methods to analyse the ways design teams approach and employ a full scale 3D immersive environment – a CAVE – in collaborative design work. The analysis describes four themes relating to reflective practice occurring in the setting: orienting to the CAVE technology itself, orienting to the representation of the specific design within the CAVE, activities accounting for, or exploring alternatives within the design for the use and users of the space, and more strategic interactions around how to best represent the design and model to the client within the CAVE setting. The analysis also reveals some unique aspects of design work in this environment. Perhaps most significantly, rather than enhancing or adding to an existing understanding of design through paper based or non-immersive digital representations, it is often acting to challenge or surprise the participants as they experience the immersive, full scale version of their own design.

Corporate identity through graphic design

The degree project has been implemented abroad in Brisbane, Australia. A literature study has beenperformed parallel to the practical work within the subject »Corporate identity through graphicaldesign«. In this study deeper research has been made concerning the establishment and manifestationof a corporate identity and its program. The knowledge given from this study has been put into practicethrough two larger projects.The first project was carried out at De Pasquale, advertising agency in Brisbane, where a corporateidentity program was designed for a new company. The company is a fitness centre, called KnockoutFitness, which specializes in different types of boxing training sessions such as Boxing, Thai Bow andBoxercise but also Aqua aerobics. They needed a full corporate identity program including a logotype,business card, letter paper-paper and address labels.The second project was carried out at Queensland University of Technology in Brisbane. A promotioncampaign was designed for the Department of Visual Arts, which included two information folders andone advertisement. The purpose of the campaign was to promote both the undergraduate and postgraduatecourses offered within the department.

Photovoltaic System Design for a Contaminated Area in Falun – Comparison of South and East- West Layout

In this thesis the solar part of a large grid-connected photovoltaic system design has been done. The main purpose was to size and optimize the system and to present figures helping to evaluate the prospective project rationality, which can potentially be constructed on a contaminated area in Falun. The methodology consisted in PV market study and component selection, site analysis and defining suitable area for solar installation; and system configuration optimization based on PVsyst simulations and Levelized Cost of Energy calculations. The procedure was mainly divided on two parts, preliminary and detailed sizing. In the first part the objective was complex, which included the investigation of the most profitable component combination and system optimization due to tilt and row distance. It was done by simulating systems with different components and orientations, which were sized for the same 100kW inverter in order to make a fair comparison. For each simulated result a simplified LCOE calculation procedure was applied. The main results of this part show that with the price of 0.43 €/Wp thin-film modules were the most cost effective solution for the case with a great advantage over crystalline type in terms of financial attractiveness. From the results of the preliminary study it was possible to select the optimal system configuration, which was used in the detailed sizing as a starting point. In this part the PVsyst simulations were run, which included full scale system design considering near shadings created by factory buildings. Additionally, more complex procedure of LCOE calculation has been used here considered insurances, maintenance, time value of money and possible cost reduction due to the system size. Two system options were proposed in final results; both cover the same area of 66000 m2. The first one represents an ordinary South faced design with 1.1 MW nominal power, which was optimized for the highest performance. According to PVsyst simulations, this system should produce 1108 MWh/year with the initial investment of 835,000 € and 0.056 €/kWh LCOE. The second option has an alternative East-West orientation, which allows to cover 80% of occupied ground and consequently have 6.6 MW PV nominal power. The system produces 5388 MWh/year costs about 4500,000 € and delivers electricity with the same price of 0.056 €/kWh. Even though the EW solution has 20% lower specific energy production, it benefits mainly from lower relative costs for inverters, mounting and annual maintenance expenses. After analyzing the performance results, among the two alternatives none of the systems showed a clear superiority so there was no optimal system proposed. Both, South and East-West solutions have own advantages and disadvantages in terms of energy production profile, configuration, installation and maintenance. Furthermore, the uncertainty due to cost figures assumptions restricted the results veracity.

Video- och Projektions-design : En fallstudie i videoscenografi

Denna uppsats har för avsikt att beskriva och redogöra för området videoscenografi och hur en videoscenograf arbetar. Videoscenografer har 90- och 00-talets snabba utveckling av prestanda inom datakraften att tacka för sin funktion, i en värld som kräver alltmer av kreatören frågar jag mig hur videoscenografen ser på sin omvärld. Videoscenografen verkar i området mellan det konstnärliga, scentekniska och grafiska. Deras position är fortfarande under förvirring just eftersom deras arbetsfält är så brett. Uppsatsen klargör för läsaren vad det är de sysslar med inom en scenkonstproduktion och varför videoscenografin är en sak för framtiden. Video inom scenkonstproduktioner blir allt viktigare, samtidigt som dekormålares arbete blir allt mindre, men endå tvingas videoscenografen att utföra sitt arbete under trängda förhållanden, med full ljussättning på scen, eller samtidigt som repetitioner pågår där de riskerar att störa en kreativ process. Insynen i vad de sysslar med är högst begränsad eftersom det är ett ungt yrke, med så pass få utövare. Denna uppsats klargör för varför videoscenografens arbete är viktigt och varför de bör ges mer tid att utföra sitt arbete.

Mixed-signal analog-digital circuits design on the pre-diffused digital array using trapezoidal association of transistors

The mixed-signal and analog design on a pre-diffused array is a challenging task, given that the digital array is a linear matrix arrangement of minimum-length transistors. To surmount this drawback a specific discipline for designing analog circuits over such array is required. An important novel technique proposed is the use of TAT (Trapezoidal Associations of Transistors) composite transistors on the semi-custom Sea-Of-Transistors (SOT) array. The analysis and advantages of TAT arrangement are extensively analyzed and demonstrated, with simulation and measurement comparisons to equivalent single transistors. Basic analog cells were also designed as well in full-custom and TAT versions in 1.0mm and 0.5mm digital CMOS technologies. Most of the circuits were prototyped in full-custom and TAT-based on pre-diffused SOT arrays. An innovative demonstration of the TAT technique is shown with the design and implementation of a mixed-signal analog system, i. e., a fully differential 2nd order Sigma-Delta Analog-to-Digital (A/D) modulator, fabricated in both full-custom and SOT array methodologies in 0.5mm CMOS technology from MOSIS foundry. Three test-chips were designed and fabricated in 0.5mm. Two of them are IC chips containing the full-custom and SOT array versions of a 2nd-Order Sigma-Delta A/D modulator. The third IC contains a transistors-structure (TAT and single) and analog cells placed side-by-side, block components (Comparator and Folded-cascode OTA) of the Sigma-Delta modulator.

Development and evaluation of a range anxiety-reducing business model for connected full electric vehicles

This thesis develops and evaluates a business model for connected full electric vehicles (FEV) for the European market. Despite a promoting political environment, various barriers have thus far prevented the FEV from becoming a mass-market vehicle. Besides cost, the most noteworthy of these barriers is represented by range anxiety, a product of FEVs’ limited range, lacking availability of charging infrastructure, and long recharging times. Connected FEVs, which maintain a constant connection to the surrounding infrastructure, appear to be a promising element to overcome drivers’ range anxiety. Yet their successful application requires a well functioning FEV ecosystem which can only be created through the collaboration of various stakeholders such as original equipment manufacturers (OEM), first tier suppliers (FTS), charging infrastructure and service providers (CISP), utilities, communication enablers, and governments. This thesis explores and evaluates how a business model, jointly created by these stakeholders, could look like, i.e. how stakeholders could collaborate in the design of products, services, infrastructure, and advanced mobility management, to meet drivers with a sensible value proposition that is at least equivalent to that of internal combustion engine (ICE) cars. It suggests that this value proposition will be an end-2-end package provided by CISPs or OEMs that comprises mobility packages (incl. pay per mile plans, battery leasing, charging and battery swapping (BS) infrastructure) and FEVs equipped with an on-board unit (OBU) combined with additional services targeted at range anxiety reduction. From a theoretical point of view the thesis answers the question which business model framework is suitable for the development of a holistic, i.e. all stakeholder-comprising business model for connected FEVs and defines such a business model. In doing so the thesis provides the first comprehensive business model related research findings on connected FEVs, as prior works focused on the much less complex scenario featuring only “offline” FEVs.

Analysis an development of a prototype based on media wiki and semantic media wiki integrated with a design modeling that allows modeling of organizations based on demo

In a world where organizations are ever more complex the need for the knowledge of the organizational self is a growing necessity. The DEMO methodology sets a goal in achieving the specification of the organizational self capturing the essence of the organization in way independent of its implementation and also coherent, consistent, complete, modular and objective. But having such organization self notion is of little meaning if this notion is not shared by the organization actors. To achieve this goal in a society that has grown attached to technology and where time is of utmost importance, using a tool such as a semantic Wikipedia may be the perfect way of making the information accessible. However, to establish DEMO methodology in such platform there is a need to create bridges between its modeling components and semantic Wikipedia. It’s in that aspect that our thesis focuses, trying to establish and implement, using a study case, the principles of a way of transforming the DEMO methodology diagrams in comprehensive pages on semantic Wikipedia but keeping them as abstract as possible to allow expansibility and generalization to all diagrams without losing any valuable information so that, if that is the wish, those diagrams may be recreated from the semantic pages and make this process a full cycle.

Effect of bean genotypes, insecticides, and natural products on the control of Bemisia tabaci (Gennadius) biotype B (Hemiptera: Aleyrodidae) and Caliothrips phaseoli (Hood) (Thysanoptera: Thripidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efeito do sombreamento e do substrato sobre a germinação e o crescimento de plântulas de Acacia mangium e Acacia mearnsii

The speed and uniform germination of seeds, followed by the prompt seedling emergence, are highly desirable characteristics in seedling production. Studies aiming to enable the use of organic waste such as sewage sludge and pine bark in the supply chain represent a current demand. The aim of this study was to identify conditions of shading and substrate which are more favorable to the process of seed germination and seedling growth of Acacia mangium and Acacia mearnsii. After overcoming dormancy in hot water, the seeds were sown in three substrates: substrate plantmax commercial forest (control), pine bark and pine bark mixed with biosolids (1:1). The tubes were placed in a tree nursery under three shading conditions: 50%, 30% and 0% (full sun). The evaluated parameters were: speed and germination percentage (daily until 30 days) and shoot length of seedlings (weekly from 75 to 150 days). The experiment was a completely randomized design with treatments in a factorial 3 x 3 and the results were submitted to regression analysis. The highest germination was obtained in the sowing of Acacia mangium in pine bark at 30% shading and commercial substrate at 30 and 50% shading for Acacia mearnsii in pine bark under 50% shading or commercial substrate in full sun. For both species, seedlings grew faster and reached larger size in the final substrate of pine bark with biosolids and in any condition of shading (30 e 50 %) and full sun, anticipating the production of seedlings.

Efeito da restrição alimentar qualitativa precoce sobre o desempenho, as características do trato gastrintestinal e a carcaça de frangos de corte

O objetivo deste trabalho foi avaliar os efeitos da restrição alimentar qualitativa precoce sobre o desempenho, as características do trato gastrintestinal e a carcaça de frangos de corte. Um total de 975 pintos de corte de um dia da linhagem Ross, 15 parcelas com 30 machos cada e 15 parcelas com 35 fêmeas, foi distribuído em delineamento experimental inteiramente casualizado, em esquema fatorial 5 x 2 (forma de restrição x sexo), com três repetições por tratamento. As formas de restrição estudadas foram: 1 - testemunha, sem diluição; 2 -diluição com 15% de calcário; 3 - diluição com 30% de calcário; 4 - diluição com 15% de casca de arroz; e 5 - diluição com 30% de casca de arroz. Os frangos foram alimentados ad libitum com ração padrão, no período de 1 a 7 dias e de 15 a 45 dias de idade. A restrição alimentar por diluição das rações, conforme cada tratamento, foi aplicada do 8º ao 14º dia de idade. Para o período de restrição alimentar, foram formuladas rações com níveis normais de minerais e vitaminas, reduzindo-se os outros nutrientes, conforme a diluição. Os frangos submetidos à restrição alimentar qualitativa precoce, pela diluição com 15% de calcário e, 15 ou 30% de casca de arroz, apresentaram ganho compensatório, com bom desempenho final. Entretanto, a restrição com 30% de calcário foi muito severa, prejudicando o desempenho. Houve alteração nas características do trato gastrintestinal com a restrição alimentar, porém houve recuperação até o momento do abate. Os frangos submetidos à restrição alimentar qualitativa precoce apresentaram menor deposição de gordura e maior deposição de proteína na carcaça em comparação ao controle.

Seletividade do herbicida saflufenacil a Eucalyptus urograndis

As áreas com plantios florestais estão constantemente em expansão, e a interferência das plantas daninhas alteram o crescimento e desenvolvimento de plantas de eucalipto, pois estas competem por água, nutrientes, espaço e luz. Objetivou-se com este estudo avaliar a seletividade do herbicida saflufenacil, aplicado com e sem óleo mineral Dash, em plantas de Eucalyptus urograndis, em diferentes locais de aplicação (planta, solo e solo + planta). O delineamento experimental adotado foi o inteiramente casualizado, com quatro repetições, constituído de um fatorial 3 x 11, sendo três locais de aplicação do herbicida na planta e 11doses do herbicida saflufenacil combinadas ou não com o adjuvante Dash. Cada parcela constou de um vaso com uma planta. Os tratamentos usados foram: 0, 25, 25+Dash (0,5% v/v), 50, 50+Dash (0,5% v/v), 75, 100, 125, 150, 175 e 200 g i.a. ha-1 . Foram realizadas avaliações visuais de fitointoxicação durante 56 dias após aplicação (DAA). Avaliouse, ainda, a altura, o diâmetro de caule e a biomassa seca das plantas. Todas as doses testadas de saflufenacil sem adjuvante mostraram-se seletivas às plantas de E. urograndis, independentemente do local de aplicação. A adição de Dash aos tratamentos proporcionou injúrias severas às plantas nas avaliações iniciais, quando aplicado sobre as plantas, com a recuperação total destas no fim do ensaio, aos 56 DAA. A aplicação do herbicida em mistura com adjuvante somente no solo não causou intoxicação às plantas de eucalipto.

Preparo de amostras e métodos para a determinação do teor de óleo essencial de frutos de limoeiro

Objetivou-se avaliar alternativas de preparo da amostra e os métodos quantitativos para a determinação do teor de óleo em frutos de limão. Os tratamentos foram avaliados por meio do delineamento estatístico inteiramente casualizado, em esquema fatorial 2x2x6, com quatro repetições, sendo duas variedades-copa de limoeiro verdadeiro ('Siciliano' e 'Eureka'), dois métodos analíticos para a determinação do teor de óleo (Scott e Clevenger) e seis formas de preparo dos frutos para análise (análise do fruto inteiro; frutos cortados na longitudinal e análise de ¼; frutos cortados na longitudinal e análise de ¹/2; frutos cortados ao meio e análise da parte superior; frutos cortados ao meio e análise da parte inferior; e análise de ²/8 do fruto). O método denominado de Clevenger foi o mais eficiente na determinação do teor de óleo essencial, e as formas de preparo de amostras ½ inferior, ½ superior, ¼ longitudinal e ½ longitudinal dos frutos proporcionaram valores superiores de óleo essencial.