Produtividade do arroz de terras altas em função do manejo do solo e da época de aplicação de nitrogênio

O manejo adequado do solo e a identificação da época de aplicação de N podem aumentar, significativamente, a produtividade do arroz de terras altas. Neste contexto, objetivou-se, com este trabalho, avaliar a interação do manejo do solo com a época de aplicação de nitrogênio, no desenvolvimento e produtividade da cultura. O delineamento experimental utilizado foi o de blocos ao acaso, em esquema fatorial 5x2, sendo 5 tipos de manejo do solo (arado de aiveca e grade niveladora; grade aradora e grade niveladora; escarificador tipo matabroto; SPD; e Aeromix - equipamento de escarificação superficial) e duas épocas de aplicação de nitrogênio (todo N na base, sendo 45 kg ha-1 de nitrogênio aplicados com adubadora de tração mecânica, 1 dia antes da semeadura do arroz, + 45 kg ha-1 de nitrogênio aplicados no ato da semeadura; e 45 kg ha-1 de nitrogênio aplicados no ato da semeadura + 45 kg ha-1 aplicados no início do perfilhamento das plantas), com 4 repetições. Não houve interação dos fatores, para a variável estande final de plantas. Nos tratamentos onde houve revolvimento de solo com arado de aiveca e grade, observou-se maior produtividade quando o nitrogênio foi parcelado. Quando o nitrogênio foi aplicado todo no plantio, o tratamento com escarificador tipo matabroto apresentou a maior produtividade, diferindo de todos os outros tratamentos. O plantio convencional (aiveca ou grade) apresentou produtividade semelhante ao SPD, quando se aplicou o N todo no plantio.

Intoxicação por chumbo e saúde infantil: ações intersetoriais para o enfrentamento da questão

Inquérito epidemiológico realizado pela Secretaria de Estado da Saúde de São Paulo e Secretaria Municipal de Saúde de Bauru visou à realização de exames de plumbemia em 853 crianças de 0 a 12 anos, em Bauru, São Paulo, Brasil (2002), a partir de indícios de chumbo oriundo de resíduos industriais nas proximidades de uma fábrica de baterias. Os níveis sangüíneos de chumbo no grupo controle foram inferiores aos apresentados pelo grupo exposto (p < 0,05). Mediante a existência de 314 crianças com taxas de plumbemia superiores àquelas aceitáveis pelo Centers for Disease Control and Prevention (10µgPb/dl sangue), foi desencadeado um conjunto de ações com participação dos serviços públicos, universidades e voluntariado, para promover o diagnóstico e a assistência à saúde da população atingida. Ações emergenciais, visando a reduzir riscos de recontaminação, incluíram a raspagem de camada superficial das vias públicas, resultando em 1.392m³ de terra contendo material tóxico, que permanece depositada nas dependências da fábrica. Foi promovida a aspiração de poeira do interior das residências e a lavagem e vedamento das caixas d'água. O Grupo de Estudo e Pesquisa da Intoxicação por Chumbo em Crianças de Bauru, por meio deste trabalho, faz o compartilhamento de uma experiência intersetorial, multidisciplinar e interinstitucional.

Terapêutica no carcinoma de células escamosas cutâneo em gatos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influências das condições e organização do trabalho de uma indústria de transformação de cana-de-açúcar na ocorrência de acidentes de trabalho

Este estudo discute a relação entre as condições e a organização do trabalho como elementos que contribuem para a ocorrência de acidentes do trabalho. Os dados foram coletados em uma indústria produtora de açúcar, álcool e derivados, situada no Estado de São Paulo. Para a coleta dos dados utilizamos a observação direta do trabalho e realizamos entrevistas semidirigidas individuais como 22 trabalhadores do setor de produção de açúcar. A produção de açúcar foi indicada pela Equipe de Segurança e Higiene no Trabalho como o setor em que havia a maior ocorrência de acidentes. Por destacar o papel que a relação homem-trabalho desempenha na saúde física e psíquica dos trabalhadores, utilizamos a Psicodinâmica do Trabalho (Dejours, 1994) como referencial teórico para a análise dos dados obtidos nas entrevistas. A análise das entrevistas envolveu três aspectos: condições e organização do trabalho e insatisfação. Os resultados revelaram que o ambiente estudado apresenta fatores físicos, químicos e biológicos desfavoráveis à saúde dos trabalhadores. Quanto à organização do trabalho, os dados revelaram que a divisão do trabalho bem como o conteúdo das tarefas determinavam sobrecarga aos trabalhadores. O relato sobre a insatisfação envolveu: ausência de perspectiva para progressão profissional, falta de treinamento técnico, dificuldade em manejar equipamentos e inadequação dos equipamentos de proteção. Destaca-se também no discurso dos trabalhadores a ineficiência das ações organizacionais para a eliminação ou a neutralização dos riscos de acidentes do trabalho e a predominância da teoria do Ato inseguro na apuração da causalidade dos acidentes do trabalho.

Thermodynamic analysis of the cogeneration system expansion in a sugar-alcohol factory

In this work it was performed energetic and exergetic analyses of three thermal plants to assessment a cogeneration system in expansion of a sugar-alcohol factory. The initial configuration considered is constituted by a low pressure steam generator, single stage steam turbines for electricity generation and crusher, shredder and mills with mechanical driving. In the intermediary configuration, the low pressure steam generator was substituted by another which generates steam at higher pressure and higher temperature, the steam turbines for electricity generation were substituted by a multiple stages extraction-condensation turbine and the other steam turbines were maintained. The final configuration consists in the substitution of these last turbines by electrical motors. Thermodynamic analyses were performed to evaluate the equipment and the overall plants efficiencies to permit a comparison among the plants. Besides of this, some important parameters of the sugar-alcohol factories were calculated.

Thermoeconomic analysis: A criterion for the selection of cogeneration systems

The economical viability of three cogeneration schemes as supplying alternatives for a hypothetical industrial process has been studied. A cost appropriation method based on Valero's studies (1986) has been used. This method enables the determination of exergetic flows, the Second Law efficiency of equipment and the monetary costs of the products acquired by the industrial process (steam and electrical energy). The criterion adopted for the selection is the global cost of the supplied products to the industrial process as regarding in Brazilian conditions.

Expert system for hot forging design

Planning hot forging processes is a time-consuming activity with high costs involved because of the trial-and-error iterative methods used to design dies and to choose equipment and process conditions. Some processes demand many months to produce forged parts with controlled shapes, dimensions and microstructure. This paper shows how expert systems can help engineers to reduce the time needed to design precision forged parts and dies from machined parts. The software ADHFD interfacing MS Visual Basic v.5.0 and SolidEdge v.3.0 was used to design flashless hot forged gears, chosen from families of gears. © 1998 Elsevier Science S.A. All rights reserved.

Posicionamento por ponto de alta precisão utilizando o GPS: Uma solução para a geodinâmica

Point positioning from GPS data can provide precision varying from 100 meters to a few millimeters at the level of 95% probability. To reach the best level of accuracy, users need proper equipment and software, as well as access capability to GPS products available at the International GPS Geodynamics Service. In this paper, the theory related to point positioning using GPS is presented as well as the results of an experiment conducted using data from the Brazilian Active Control System. The results show repeatability better than 5mm and 10mm for the N and E baseline components respectively, and 6mm + 4ppb (parts per billion) for the vertical. Comparison with SIRGAS campaign showed results at the same level of uncertainty as that of the stations used to tie the SIRGAS frame to ITRF94. Therefore, precise point positioning is a powerful tool to be used in applications requiring high level of precision, such as Geodynamics.

Development of a low-cost mobile mapping system: A South American experience

This paper presents the prototype of a low-cost terrestrial mobile mapping system (MMS) composed of a van, two digital video cameras, two GPS receivers, a notebook computer, and a sound frame synchronisation system. The imaging sensors are mounted as a stereo video camera on top of the vehicle together with the GPS antennae. The GPS receivers and the notebook computer are configured to record data referred to the vehicle position at a planned time interval. This position is subsequently transferred to the road images. This set of equipment and methods provide the opportunity to merge distinct techniques to make topographic maps and also to build georeferenced road image databases. Both vector maps and raster image databases, when integrated appropriately, can give spatial researchers and engineers a new technique whose application may realise better planning and analysis related to the road environment. The experimental results proved that the MMS developed at the São Paulo State University is an effective approach to inspecting road pavements, to map road marks and traffic signs, electric power poles, telephone booths, drain pipes, and many other applications important to people's safety and welfare. A small number of wad images have already been captured by the prototype as a consequence of its application in distinct projects. An efficient organisation of those images and the prompt access to them justify the need for building a georeferenced image database. By expanding it, both at the hardware and software levels, it is possible for engineers to analyse the entire road environment on their office computers.

Orientação semi-automática de imagens CBERS usando rodovias como controle de campo

In this paper is proposed a methodology for semiautomatic CBERS image orientation using roads as ground control. It is based on an iterative strategy involving three steps. In the first step, an operator identifies on the image the ground control roads and supplies along them a few seed points, which could be sparsely and coarsely distributed. These seed points are used by the dynamic programming algorithm for extracting the ground control roads from the image. In the second step, it is established the correspondences between points describing the ground control roads and the corresponding ones extracted from the image. In the last step, the corresponding points are used to orient the CBERS image by using the DLT (Direct Linear Transformation). The two last steps are iterated until the convergence of the orientation process is verified. Experimental results showed that the proposed methodology was efficient with several test images. In all cases the orientation process converged. Moreover, the estimated orientation parameters allowed the registration of check roads with pixel accuracy or better.

Avaliação da assistência pré-natal e puerperal desenvolvidas em região do interior do Estado de São Paulo em 2005

Objectives: to evaluate the structure and process of the prenatal and puerperal care given by Direção Regional de Saúde (DIR) XI, at the city of Botucatu, State of São Paulo, Brazil. Methods: an evaluation of resources and activities developed during prenatal and puerperal care in twenty municipalities comprising DIR XI which had adhered the Prenatal and Birth Humanization Program until 2003. Interviews with city managers and analysis of 385 sampled patient charts taking into account recommendations by the Health Department. Results: structure analysis showed that caregiving was centered on medical work; basic equipment and instruments were available; 85.2% of patients began prenatal care with up to 120 days of pregnancy, and 75.9% had at least six prenatal consultations. The active search for absentees and strategies for early prenatal care initiation were observed in 30% and 50% of the municipalities, respectively. Process indicators showed that 3.6% of women had six prenatal consultations, one puerperal consultation, all basic exams and tetanus immunization. Recording of gestational age, arterial blood pressure and weight was of approximately 90%; 58.7% of the women underwent childbirth review and 31.5% were vaccinated. Conclusions: the performance of the set of activities is a challenge to prenatal care at DIR XI.

Fatigue behaviour study on repaired aramid fiber/epoxy composites

Aramid fiber reinforced polymer composites have been used in a wide variety of applications, such as aerospace, marine, sporting equipment and in the defense sector, due to their outstanding properties at low density. The most widely adopted procedure to investigate the repair of composites has been by repairing damages simulated in composite specimens. This work presents the structural repair influence on tensile and fatigue properties of a typical aramid fiber/epoxy composite used in the aerospace industry. According to this work, the aramid/epoxy composites with and without repair present tensile strength values of 618 and 680MPa, respectively, and tensile modulus of 26.5 and 30.1 GPa, respectively. Therefore, the fatigue results show that in loads higher than 170 MPa, both composites present a low life cycle (lower than 200,000 cycles) and the repaired aramid/epoxy composite presented low fatigue resistance in low and high cycle when compared with non-repaired composite. With these results, it is possible to observe a decrease of the measured mechanical properties of the repaired composites.

Portable Hardness tester for timber classification

Hardness is a property largely used in material specifications, mechanical and metallurgical research and quality control of several materials. Specifically for timber, Janka hardness is a simple, quick and easy test, with good correlations with the compression parallel to grain strength, a strong reference in structural classification for this material. More recently, international studies have reported the use of Brinell hardness for timber assessment which resumes the advantages previously mentioned for Janka hardness and make it easier to be performed in the field, especially because of the lower magnitude of the involved loads. A first generation of an equipment for field evaluation of hardness in wood - Portable Hardness tester for wood - based on Brinell hardness has already been developed by the Research Group on Forest Products from FCA/UNESP, Brazil, with very good correlations between the evaluated hardness and several other mechanical properties of the material when performing tests with different species of native and reforested wood (traditionally used as ties - sleepers - in railways). This paper presents results obtained in the experimental program with the first generation of this equipment and preliminary tests with its second generation, which uses accelerometers to substitute the indentation measurements in wood. For the first generation of the equipment functional and calibration tests were carried out using 16 native and reforestation timber lots, among there E. citriodora, E. tereticornis, E. saligna, E. urophylla, E. grandis, Goupia glabra and Bagassa guianenses, with different origins and ages. The results obtained confirm its potential in the classification of specimens, with inclusion errors varying from 4.5% to 16.6%.

Avaliação da qualidade da água purificada em farmácias magistrais da região de São José do Rio Preto, SP

Water is the raw material used most in the production of diverse pharmaceutical forms and, being a constituent of the formulation itself, is subject to a number of physico-chemical and microbiological specifications. In addition, it is indispensable for laboratory tests and the cleaning of equipment and apparatus. The aim of this study was to ascertain the degree of physicochemical and microbiological contamination of purified water used in compounding pharmacies in the city of São José do Rio Preto, SP, Brazil. Samples were taken as recommended in the USP Pharmacopeia, with careful aseptic technique, and sent immediately the to quality control laboratory. Physicochemical properties were analyzed, including appearance, pH, conductivity, residue after evaporation, ammonia, calcium, chloride, heavy metals, sulfate and oxidizable substances, and microbiological tests were performed: total aerobic microbial count and detection of total and thermotolerant coliforms and Pseudomonas aeruginosa. Results showed that some parameters did not conform to the standards, especially pH, conductivity, inorganic impurities, oxidizable substances and microbiological test data, in 10%, 17%, 10%, 14% and 20% of the analyzed samples, respectively, This points to the need for greater care in the production and/or storage of purified water in these pharmaceutical establishments.

Antimicrobial effects of ozonated water on the sanitization of dental instruments contaminated with E. coli, S. aureus, C. albicans, or the spores of B. atrophaeus

Objectives: Ozone has been used as an alternative method for the decontamination of water, food, equipment and instruments. The objective of this study was to evaluate the antimicrobial effects of ozonated water on the sanitization of dental instruments that were contaminated by Escherichia coli, Staphylococcus aureus, Candida albicans and the spores of Bacillus atrophaeus. Methods: A total of one hundred and twenty standardized samples of diamond dental burs were experimentally contaminated with E. coli (ATCC 25922), S. aureus (ATCC 6538) and C. albicans (ATCC 18804) and the spores of B. atrophaeus (ATCC 6633) for 30min. After the contamination, the samples were exposed to ozonated water (10mg/L O3) for 10 or 30min. The control group was composed of samples that were exposed to distilled water for 30min. After the exposure to the ozonated water, 0.1mL aliquots were seeded onto BHI agar to count the colony-forming units per milliliter (CFU/mL) of E. coli, S. aureus, and B. atrophaeus. Sabouraud dextrose agar was used to count the CFU/mL of C. albicans. The results were subjected to an analysis of variance and the Tukey test. Results: For all of the microorganisms studied, the ozonated water reduced the number of CFU/mL after 10 and 30. min of sanitization, and this microbial reduction was dependent on the duration of the exposure to the ozonated water. E. coli exhibited the greatest reduction in CFU/mL (2.72-3.78. log) followed by S. aureus (2.14-3.19. log), C. albicans (1.44-2.14. log) and the spores of B. atrophaeus (1.01-1.98. log). Conclusion: The ozonated water was effective in reducing the CFU of E. coli, S. aureus, C. albicans and B. atrophaeus spores, suggesting that ozonated water can be used for the sanitization of dental instruments. © 2012 King Saud Bin Abdulaziz University for Health Sciences.