Exploration strategies map along fast-slow metabolic and life-history continua in muroid rodents

1Personality is highly relevant to ecology and the evolution of fast–slow metabolic and life-history strategies. One of the most important personality traits is exploratory behaviour, usually measured on an animal introduced to a novel environment (e.g. open-field test).2Here, we use a unique comparative dataset on open-field exploratory behaviour of muroid rodents to test a key assumption of a recent evolutionary model, i.e. that exploration thoroughness is positively correlated to age at first reproduction (AFR). We then examine how AFR and exploratory behaviour are related to basal metabolic rate (BMR).3Inter-specific variation in exploratory behaviour was positively correlated with AFR. Both AFR and exploration behaviour were negatively correlated with BMR. These results remained significant when taking phylogeny into account.4We suggest that species occupying unproductive and unpredictable environments simultaneously benefit from high exploration, low BMR and delayed AFR because exploration increases the likelihood of finding scarce resources, whereas low BMR and delayed reproduction enhance survival during frequent resources shortages.5This study provides the first empirical evidence for a link between personality, life-history, phylogeny and energy metabolism at the inter-specific level. The superficial-thorough exploration continuum can be mapped along the fast–slow metabolic and life-history continua.

Barriers to avoiding fast-food consumption in an environment supportive of unhealthy eating

Objective
To investigate factors (ability, motivation and the environment) that act as barriers to limiting fast-food consumption in women who live in an environment that is supportive of poor eating habits.

Design
Cross-sectional study using self-reports of individual-level data and objectively measured environmental data. Multilevel logistic regression was used to assess factors associated with frequency of fast-food consumption.

Setting
Socio-economically disadvantaged areas in metropolitan Melbourne, Australia.

Subjects
Women (n 932) from thirty-two socio-economically disadvantaged neighbourhoods living within 3 km of six or more fast-food restaurants. Women were randomly sampled in 2007–2008 as part of baseline data collection for the Resilience for Eating and Activity Despite Inequality (READI) study.

Results
Consuming low amounts of fast food was less likely in women with lower perceived ability to shop for and cook healthy foods, lower frequency of family dining, lower family support for healthy eating, more women acquaintances who eat fast food regularly and who lived further from the nearest supermarket. When modelled with the other significant factors, a lower perceived shopping ability, mid levels of family support and living further from the nearest supermarket remained significant. Among those who did not perceive fruits and vegetables to be of high quality, less frequent fast-food consumption was further reduced for those with the lowest confidence in their shopping ability.

Conclusions
Interventions designed to improve women's ability and opportunities to shop for healthy foods may be of value in making those who live in high-risk environments better able to eat healthily.

Fast and Fashionable: The Girls in the Girl of the Period Miscellany

The Girl of the Period Miscellany is particularly interesting in that it reworked the Girl of the Period from an object of disdain into a figure who might be humorous, but who was also engaging and sympathetic. Rather than being easily categorized and dismissed, the Girl of the Period found in the Miscellany has some characteristics that invite satire but she is also capable, entertaining, and attractive. Moreover, there is a significant difference between thinking about the article that spawned the phenomenon and the Miscellany itself. Appearing in the conservative Saturday Review, the article was provocative and seemingly intended to be so. In contrast, the Miscellany was designed to attract and retain a readership. This article will examine how and why the Miscellany is able to resist Linton’s simplistic construction of the Girl of the Period and instead depicts a variety of different girls who, although their behaviour might be more “modern,” are nonetheless worthy of respect and attention as pure, virtuous, middle-class girls. In addition, the publication of the Miscellany demonstrates the challenges of attracting as readers a group of girls and young women whose self-conception was rapidly shifting at the end of the 1860s.

Space vector modulation based fast speed response field-orientation control of induction motor drive with adaptive neural integrator

This paper presents a novel fast speed response control strategy for the poly-phase induction motor drive system based on flux angle. The control scheme is derived in rotor field coordinates and employs the estimation of the rotor flux and its position. An adaptive notch filter is proposed to eliminate the dc component of the integration of signals used for the rotor flux estimation. To improve the performance of the rotor flux estimator, derivative term of the back emf is incorporated in the system. The voltage components in the synchronous reference frame are generated in the controllers which are transformed to stationary reference frame for driving the motor. Space vector modulation technique is used here. Simulation of the drive system was carried out and the results were compared with those obtained for a system that produces the above mentioned voltage components using the conventional PI controller. It is observed that the proposed control methodology provides faster response than the conventional PI controller incorporated system.

Very high pressure liquid chromatography using fully porous particles: Quantitative analysis of fast gradient separations without post-run times

Using a column packed with fully porous particles, four methods for controlling the flow rates at which gradient elution runs are conducted in very high pressure liquid chromatography (VHPLC) were tested to determine whether reproducible thermal conditions could be achieved, such that subsequent analyses would proceed at nearly the same initial temperature. In VHPLC high flow rates are achieved, producing fast analyses but requiring high inlet pressures. The combination of high flow rates and high inlet pressures generates local heat, leading to temperature changes in the column. Usually in this case a post-run time is input into the analytical method to allow the return of the column temperature to its initial state. An alternative strategy involves operating the column without a post-run equilibration period and maintaining constant temperature variations for subsequent analysis after conducting one or a few separations to bring the column to a reproducible starting temperature. A liquid chromatography instrument equipped with a pressure controller was used to perform constant pressure and constant flow rate VHPLC separations. Six replicate gradient separations of a nine component mixture consisting of acetophenone, propiophenone, butyrophenone, valerophenone, hexanophenone, heptanophenone, octanophenone, benzophenone, and acetanilide dissolved in water/acetonitrile (65:35, v/v) were performed under various experimental conditions: constant flow rate, two sets of constant pressure, and constant pressure operation with a programmed flow rate. The relative standard deviations of the response factors for all the analytes are lower than 5% across the methods. Programming the flow rate to maintain a fairly constant pressure instead of using instrument controlled constant pressure improves the reproducibility of the retention times by a factor of 5, when plotting the chromatograms in time.

Beware fast tracking high rise building

Currently, employers tend to fast rack works where construction can begin while design is still incomplete following three main phases of procurement. This session details a case study of a fast track overseas super high rise building, where an Australian firm acted as a technical expert to provide a detailed report on the failure of the shoring system, while construction of five basements had just started next to a marina. The lessons learnt from the case study are summarized with recommendations to have better practice of the fast track method in complex high rise buildings.

Extending an industrial root controller : implementation and applications of a fast open sensor interface

An overview is given of the design and implementation of a platform for fast external sensor integration in an industrial robot system called ABB S4CPlus. As an application and motivating example, the implementation of force-controlled grinding and deburring within the AUTOFETT-project is discussed. Experiences from industrial usage of the fully developed prototype confirms the appropriateness of the design choices, thus also confirming the fact that control and software need to be tightly integrated. The new sensor can be used for the prototyping and development of a wide variety of new applications

New opportunities for quantitative and time efficient 3D MRI of liquid and solid electrochemical cell components: Sectoral Fast Spin Echo and SPRITE.

The ability to image electrochemical processes in situ using nuclear magnetic resonance imaging (MRI) offers exciting possibilities for understanding and optimizing materials in batteries, fuel cells and supercapacitors. In these applications, however, the quality of the MRI measurement is inherently limited by the presence of conductive elements in the cell or device. To overcome related difficulties, optimal methodologies have to be employed. We show that time-efficient three dimensional (3D) imaging of liquid and solid lithium battery components can be performed by Sectoral Fast Spin Echo and Single Point Imaging with T1 Enhancement (SPRITE), respectively. The former method is based on the generalized phase encoding concept employed in clinical MRI, which we have adapted and optimized for materials science and electrochemistry applications. Hard radio frequency pulses, short echo spacing and centrically ordered sectoral phase encoding ensure accurate and time-efficient full volume imaging. Mapping of density, diffusivity and relaxation time constants in metal-containing liquid electrolytes is demonstrated. 1, 2 and 3D SPRITE approaches show strong potential for rapid high resolution (7)Li MRI of lithium electrode components.

Fast road detection and tracking in aerial videos

 We propose a fast approach for detecting and tracking a specific road in aerial videos. It combines adaptive Gaussian Mixture Models (GMMs) to describe road colour distributions, and homography based tracking to track road geometries, where an efficient technique is developed to estimate homography transformations between two frames. Experiments are conducted on videos captured by our unmanned aerial vehicles. All the results demonstrate the effectiveness of our proposed method. We test 1755 frames from 5 videos. Our approach can achieve 0.032 seconds per frame and 2.64% segmentation error for images with 908 × 513 resolutions, on average.