Avaliação da tenacidade à fratura de diferentes sistemas cerâmicos

Although ceramics present high compressive strength, they are brittle materials due to their low tensile strength so they have lower capacity to absorb shocks. This study evaluated the fracture toughness of different ceramic systems, which refers to the ability of a friable material to absorb defformation energy. Three ceramic systems were investigated. Ten cylindrical samples (5,0mm x 3,0mm), were obtained from each ceramic material as follows: G1- 10 samples of Vitadur Alpha (Vita-Zahnfabrik); G2- 10 samples of IPS Empress2 (Ivoclar-Vivadent); G3- 10 samples of In-Ceram Alumina (Vita-Zahnfabrik). Fracture toughness values were collected upon indentation tests that were performed under a heavy load. A microhardness tester (Digital Microhardness Tester FM) utilized a 500gf load cell during 10seconds to perform four impressions on each sample. Statistically significant results were observed (ANOVA and Kruskal-Wallis tests). In-Ceram Alumina presented the highest median toughness values (2,96N/m3/2), followed by Vitadur Alpha (2,08N/m3/2) and IPS Empress2 (1,05N/m3/2). It may be concluded that different ceramic systems present distinct fracture toughness values, thus In-Ceram is capable of absorbing superior stress when compared to Vitadur Alpha and IPS Empress2.

Evaluation of the shear bond strength of the union between two CoCr-alloys and a dental ceramic

Introduction: Based on the importance of the integrity of the metal/ceramic interface, the purpose of this work was to evaluate the shear bond strength of the metal-ceramic union of two Co-Cr alloys (Wirobond C, Bego; Remanium 2000, Dentaurum) combined with Omega 900 ceramic (Vita Zahnfabrik). Material and Method: Eleven cylindrical matrixes were made for each alloy, and the metallic portion was obtained with the lost wax casting technique with standardized waxing of 4mm of height and of 4mm of diameter. The ceramic was applied according to the manufacturer's recommendations with the aid of a teflon matrix that allowed its dimension to be standardized in the same size as the metallic portion. The specimens were submitted to the shear bond test in an universal testing machine (EMIC), with the aid of a device developed for such intention, and constant speed of 0.5mm/min. Results and Conclusions: The mean resistance was 48.387MPa for Wirobond C alloy, with standard deviation of 17.718, and 55.956MPa for Remanium 2000, with standard deviation of 17.198. No statistically significant difference was observed between the shear strength of the two metal-ceramic alloys.

Resistência de união entre um cimento resinoso e uma cerâmica aluminizada submetida a diferentes tratamentos de superfície

Pós-graduação em Odontologia Restauradora - ICT

Desenvolvimento de um sistema de SHM sem fio e com compensação automática de temperatura

Pós-graduação em Engenharia Elétrica - FEIS

Desempenho de sondas Lambda no monitoramento de motores do ciclo Otto alimentados por etanol e GNV

Pós-graduação em Engenharia Mecânica - FEB

Efeito da infiltração de sílica pelo método sol-gel na resistência à flexão de bicamadas de porcelana e Y-TZP

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo das propriedades físicas de sistemas ferroelétricos com estruturas tipo Aurivillius

Pós-graduação em Ciência dos Materiais - FEIS

Protocolo para tratamento de diastemas com laminados de porcelana: descrição de caso clínico

A percepção e o alcance da excelência estética traduzem-se especialmente em saber interpretar e satisfazer os anseios dos pacientes, empregando-se para isso todo o conhecimento disponível na literatura científica. No tratamento com laminados cerâmicos, a ciência fornece parâmetros para nos guiar com relação a um correto diagnóstico, planejamento seguro, técnica adequada e material mais indicado; porém, a subjetividade estética pode estar escondida nas entrelinhas da ciência. Contudo, o objetivo deste artigo é descrever um protocolo para fechamento de múltiplos diastemas, salientando a técnica empregada, bem como o material cerâmico utilizado e suas peculiaridades, implícitas dentro de um contexto estético específico.

Registro do perfil de emergência para mimetização dos dentes naturais na região estética

Introdução: o tratamento com implantes dentários para a reposição de dentes na região estética exige a utilização de materiais e técnicas que permitam o máximo de naturalidade entre a restauração, os dentes vizinhos e o tecido gengival. Dessa forma, torna-se necessário criar o correto perfil de emergência para o dente, assim como a utilização de materiais com alto potencial estético. Objetivo: o objetivo do presente trabalho foi ilustrar, através de um caso clínico, a utilização de uma técnica de moldagem para a correta cópia do perfil de emergência do dente e sua transferência para o modelo de trabalho, tornando possível a confecção de uma restauração totalmente cerâmica, perfeitamente integrada ao tecido gengival. Caso clínico: paciente de 30 anos, procurou o clínica de prótese dentária com desejo de melhorar a estética dos dentes. Após diagnóstico e planejamento, foram confeccionadas 2 coroas totalmente cerâmicas sobre os dentes 12 e 21, e confecção de 1 coroa cerâmica sobre um pilar de zircônia após o estabelecimento e registro do perfil de emergência do dente 11. Conclusão: após a conclusão do tratamento, observou-se naturalidade, estética e perfeita integração entre as restaurações, os dentes remanescentes e o tecido gengival.

Resolução estética associando prótese sobre implante e prótese convencional na região anterior

The combination of several methods for solving aesthetics in a clinical case can be a complicating factor. The diagnosis and planning of the event held in conjunction with the dental technician expand the possibilities of success. The present case illustrates the aesthetic resolution through the association of implant- and tooth-supported prostheses using metal free ceramic systems. A 38-year old male patient presented with a complex smile. After diagnosis and treatment planning, two ceramic crowns were made, one on tooth 11 and one on the implant region 21, along with a laminated porcelain veneer on the region of 12. Aesthetic needs of the patient are predictable only with a sound diagnosis.

Plástica gengival associada à laminados cerâmicos para resolução estética

Sometimes we face clinical situations in which the lack of harmony in the smile is caused by a major exhibition of the gingival tissue. In these cases the professional should be able to perform a detailed analysis of the static and dynamic components of the smile, in search of a satisfactory planning and treatment which may include different dental specialties. For these situations, the association of periodontics/prosthesis is a viable alternative that has been used positively in search of an aesthetic and functional condition that benefits the patient, without leaving aside the preservation of periodontal tissues and of the remaining structure of the tooth. Thus, the aim of this study was to describe a case in which the association between these two areas was proposed to correct gummy smile and dental vestibularization. Clinical results and the satisfaction of the patient indicate that this multidisciplinary treatment combining periodontal and prosthetic techniques is favorable to positive results in cases of compromised smile aesthetics due to excessive gum tissue.

Reabilitação estética com enfoque nas diferentes cores de substratos e na escolha da cor do cimento adesivo

The evolution of techniques and materials applied to adhesive ceramic restorations resulted in the intensification of its use, proving to be an excellent method of aesthetic restoration. Some important features of this technique are its conservative preparation, which avoids an excessive loss of tooth structure and its high aesthetic value provided by the ceramic even when utilized under different color of dental substrates. The aim of this paper was to report a clinical case with full crowns, porcelain veneers and non-prep veneers, enhancing peculiarities related to the material used, tooth preparation techniques, cementing, indications and contraindications.

Qualidade de vida de cirurgiões-dentistas que atuam no serviço público

Introduction: The quality of life of dentists has worsened over time, due to increased risks of labor and competitiveness in the labor market. However, there are only few studies about it. Objective: Investigate the perception of quality of life of dentists working in public service. Methods: In order to accomplish that, a cross-sectional study survey was conducted with 52 dentists of the professional permanent staff of the Municipal Health Service. The data were collected through structured questionnaire, validated, self-administered, proposed by the World Health Organization (WHO) in its shortened version, WHOQOL-Bref. Descriptive statistics and multiple regression were conducted, taking 95% as the confidence interval that characterizes the sample and the calculation of scores for each domain. Results: There was predominance of female subjects (76.9%) the majority of them aged 25 to 35 years (48.7%). Most professionals consider their quality of life good (82.7%), and were satisfied with their health (71.2%). Considering the measures of central tendency and dispersion, the physical domain (13.8) and Environment (13.8) had the lowest mean scores. All areas affected equally poor quality of life of research participants. The facets that showed the lowest values were the physical environment with 39.71 points and 53.92 points to financial resources. Conclusion: The majority of professionals were satisfied with their health and considered their quality of life good.

Association between bruxism, alcohol and tobaco use among brazilian students

The etiology of bruxism is not well defined. Different factors affecting the central nervous system are considered as risk factors for bruxism. Dental students are not immune to the bruxism, alcohol consumption and tobacco use, despite their training, knowledge of its effects and social responsibility. The purpose of this study was to evaluate the association between bruxism, alcohol consumption and tobacco use among Brazilian dental students. Participants were chosen among 180, 17-29 year-old students at the UNESP’s Dentistry School – Araçatuba Campus. They were divided into those with and without bruxism on the basis at validated clinical criteria. The clinical examinations were carried out by four standardized examiners (Intraexaminer and Interexaminer Unweighted kappa= 0.82, Weighted kappa= 0.89, respectively), in the clinic, with daylight and a tongue depressor. Bruxism was registered with the following categories: no wear facets, wear facets in enamel, dentine wear facets, facets wear half of the crown and wear facets more than 2/3 of the tooth crown. A self report validated questionnaire for alcohol consumption and tobacco use with 29 questions was completed by both groups. Fischer exact test and T-test were used and Odds Ratio and Confidence Interval was estimated. Bruxism was more frequent among cigarette smokers both in men (68.4%) and in women (56.8%). Among all respondents in this group, 82.6% reported that they would like to quit smoking and those who have tried previously to quit (76.4%) found it made them more stressed. Drinker was more frequent in the group with bruxism also (66.5% of the female and 73.5% of the male). 88.4% reported drinking alcohol because it “allows dealing with stress in an adequate way”. Results suggest a positive association between bruxism and alcohol consumption and tobacco use.

Avaliação dos preparos da superfície cerâmica para a colagem de acessórios ortodônticos

The purpose of this study was to evaluate the effects of two conditioning methods used to enhance the shear strength of orthodontic brackets bonded to porcelain surfaces. A total of 18 feldspathic specimens were used. The specimens were divided randomly into two groups (n = 9): group free silane, the porcelain specimens were etched with hidrofuoric acid 10% (Acid Gel-Maquira) for 4 minutes followed by adhesive-primer (Transbond XT) and the metallic brackets (Morelli Roth Light .022" x .030") were bonded with a light-cured microfilled resin (Transbond XT Light Cure Orthodontic Adhesive); group silane, the porcelain specimens were etched with hidrofuoric acid 10% (Acid Gel-Maquira) for 4 minutes followed by silane (Silano Ângelus) for 1 minute, adhesive-primer (Transbond XT) and the metallic brackets (Morelli Roth Light .022" x .030") were bonded with a light-cured microfilled resin (Transbond XT Light Cure Orthodontic Adhesive). All specimens were stored in solution of artificial saliva at ambient temperature for 24 hours. The debonding was done with shear strength through a universal testing machine (DL 500-Emic) calibrated with a fixed speed of 1mm/minute. Statical analysis was performed using the Student t test. The results indicated that in the free silane group the mean bond strength was 9,97 MPA, significantly lower than the silane group, that was 12,38 MPa (p < 0,05). The both groups were effective for bonding, although the silane group had the highest bond strength values.