Aproveitamento de resíduo de beneficiamento do caulim na produção de porcelanato cerâmico

Nowadays, industries from all sectors have great concerns over the disposition of the residues generated along the productive process. This is not different in the mineral sector, as this generates great volumes of residues. It was verified that the kaolin improvement industry generates great volumes of residue basically constituted of kaolinite, muscovite mica and quartz, which are basic constitution elements to formularisations of ceramics masses to the production of covering of stoneware tiles type. This happens because the methodology applied to the improvement process is still very rudimentary, what causes a very low yield, only ¼ from all the material volume that enters the improvement process, in the end, is marketable. The disposal of this residue, in a general way, causes a very big negative environmental impact, what has justified the researches efforts aiming to find a rational solution to this problem. In this way, the intention of this present work is the utilization of this residue in the manufacture of products to high quality ceramics covering, stoneware tiles in an industrial scale. For this purpose, the influence of the addition of the residue to a standard ceramics mass used by a ceramics sector company, already established in the market, with the intention of verifying the possibility of use of this residue as the mass complementary raw material and even the possible partial or total substitution of one of the components of the mass for the raw material in evidence will be studied. To the accomplishment of this work, the kaolin improvement residue generated by an industry of exploitation and improvement of kaolin, located in the region of Equador-RN, in the levels 1,2,4,8, 16 and 32% will be added to the standard mass already used for the production of stoneware tiles. The raw materials used, kaolin residue and the standard mass, were characterized through DRX, FRX, DTA, TGA and dilatometry. After the sintering of the bodies of test, tests of water absorption, apparent porosity, post burning linear retraction, apparent specific mass and flexural strength (3 point bending) were realized to determinate the technological properties of these materials. The results show the studied residue can be considered raw material of great potential to the industry of floor and ceramics covering of the stoneware tiles type

Sinterização de matrizes cerâmicas à base de alumina reforçadas por carbetos a partir de precursores poliméricos

Ceramic composites produced with polymerics precursors have been studied for many years, due to the facility of obtaining a complex shape, at low temperature and reduces cost. The main objective of this work is to study the process of sintering of composites of ceramic base consisting of Al2O3 and silicates, reinforced for NbC, through the technique of processing AFCOP, as well as the influence of the addition of LZSA, ICZ and Al as materials infiltration in the physical and mechanical properties of the ceramic composite. Were produced ceramic matrix composites based SiCxOy e Al2O3 reinforced with NbC, by hidrosilylation reaction between D4Vi and D1107 mixtured with Al2O3 as inert filler, Nb and Al as reactive filler. The specimens produced were pyrolised at 1200, 1250 and 1400°C and infiltred with Al, ICZ and LZSA, respectively. Density, porosity, flexural mechanical strength and fracture surface by scanning electron microscopy were evaluated. The microstructure of the composites was investigated by X-ray diffraction to identify the presence of crystalline phases. The composites presented apparent porosity varying of 31 up to 49% and mechanical flexural strength of 14 up to 34 MPa. The infiltration process improviment of the densification and reduction of the porosity, as well as increased the values of mechanical flexural strength. The obtained phases had been identified as being Al3Nb, NbSi2, Nb5S3, Nb3Si and NbC. The samples that were submitted the infiltration process presented a layer next surface with reduced pores number in relation to the total volume

Effects of infiltration pressure on mechanical properties of Al–12Si/graphite composites for piston engines

In this work results for the flexural strength and the thermal properties of interpenetrated graphite preforms infiltrated with Al-12wt%Si are discussed and compared to those for packed graphite particles. To make this comparison relevant, graphite particles of four sizes in the range 15–124 μm, were obtained by grinding the graphite preform. Effects of the pressure applied to infiltrate the liquid alloy on composite properties were investigated. In spite of the largely different reinforcement volume fractions (90% in volume in the preform and around 50% in particle compacts) most properties are similar. Only the Coefficient of Thermal Expansion is 50% smaller in the preform composites. Thermal conductivity of the preform composites (slightly below 100 W/m K), may be increased by reducing the graphite content, alloying, or increasing the infiltration pressure. The strength of particle composites follows Griffith criterion if the defect size is identified with the particle diameter. On the other hand, the composites strength remains increasing up to unusually high values of the infiltration pressure. This is consistent with the drainage curves measured in this work. Mg and Ti additions are those that produce the most significant improvements in performance. Although extensive development work remains to be done, it may be concluded that both mechanical and thermal properties make these materials suitable for the fabrication of piston engines.

Electro-optical characterization of IC compatible microcantilevers

The aim of this work is to simulate and optically characterize the piezoelectric performance of complementary metal oxide semiconductor (CMOS) compatible microcantilevers based on aluminium nitride (AlN) and manufactured at room temperature. This study should facilitate the integration of piezoelectric micro-electro-mechanical systems (MEMS) such as microcantilevers, in CMOS technology. Besides compatibility with standard integrated circuit manufacturing procedures, low temperature processing also translates into higher throughput and, as a consequence, lower manufacturing costs. Thus, the use of the piezoelectric properties of AlN manufactured by reactive sputtering at room temperature is an important step towards the integration of this type of devices within future CMOS technology standards. To assess the reliability of our fabrication process, we have manufactured arrays of free-standing microcantilever beams of variable dimension and studied their piezoelectric performance. The characterization of the first out-of-plane modes of AlN-actuated piezoelectric microcantilevers has been carried out using two optical techniques: laser Doppler vibrometry (LDV) and white light interferometry (WLI). In order to actuate the cantilevers, a periodic chirp signal in certain frequency ranges was applied between the device electrodes. The nature of the different vibration modes detected has been studied and compared with that obtained by a finite element model based simulation (COMSOL Multiphysics), showing flexural as well as torsional modes. The correspondence between theoretical and experimental data is reasonably good, probing the viability of this high throughput and CMOS compatible fabrication process. To complete the study, X-ray diffraction as well as d33 piezoelectric coefficient measurements were also carried out.

A comparative study of guided wave propagation in timber poles with isotropic and transversely isotropic material models

Guided wave (GW) has been used for many years in non-destructive testing (NDT). There are various ways to generate the guided wave, including impact or impulse either manually or using devices. Although the method of impact or impulse is considered to be simple and practical in guided wave generation, it produces waves with broadband frequencies, which often make analysis much more difficult. The frequency bandwidth produced by manual impacts is usually at the low end, and is therefore justified when dealing with one dimensional wave propagation assumption in low strain integrity testing of cylindrical structures. Under such assumption if the velocity is known accurately, NDTs can produce reasonably good results for the condition assessment of the structure. However, for guided wave propagation in timber pole-like structures, it is rather complicated as timber is an orthotropic material and wave propagation in an orthotropic medium exhibits different characteristics from that in isotropic medium. It is possible to obtain solutions for guided wave propagation in orthotropic media for cylindrical structures, even though the orthotropic material greatly complicates GW propagation. In this paper, timber has been considered as a transversely isotropic (i.e. simplified orthotropic) material and a comparative study of GW propagation in a timber pole is conducted considering isotropic and transversely isotropic modelling. Phase velocity, group velocity and attenuation are the main parameters for this comparative study. Moreover, tractionfree situation and embedded geotechnical condition are also taken into consideration to evaluate the effect of boundary. Displacement profile, wave propagation pattern and power flow at particular frequency are utilized to determine different displacement components of longitudinal and flexural waves along and across the timber pole. Effect of temperature and moisture content (in terms of modulus of elasticity) in timber pole is also compared to show the variation in phase velocity.

Correlation of throwing velocity to the results of lower-body field tests in male college baseball players

Baseball-specific athleticism, potential, and performance have been difficult to predict. Increased muscle strength and power can increase throwing velocity but the majority of research has focused on the upper body. The present study sought to determine if bilateral or unilateral lower-body field testing correlates with throwing velocity. Baseball throwing velocity scores were correlated to the following tests: medicine ball (MB) scoop toss and squat throw, bilateral and unilateral vertical jumps, single and triple broad jumps, hop and stop in both directions, lateral to medial jumps, 10- and 60-yd sprints, and both left and right single-leg 10-yd hop for speed in 42 college baseball players. A multiple regression analysis (forward method), assessing the relationship between shuffle and stretch throwing velocities and lower-body field test results determined that right-handed throwing velocity from the stretch position was most strongly predicted by lateral to medial jump right (LMJR) and body weight (BW; R = 0.322), whereas lateral to medial jump left (LMJL; R = 0.688) predicted left stretch throw. Right-handed shuffle throw was most strongly predicted by LMJR and MB scoop (R = 0.338), whereas LMJL, BW, and LMJR all contributed to left-handed shuffle throw (R = 0.982). Overall, this study found that lateral to medial jumps were consistently correlated with high throwing velocity in each of the throwing techniques, in both left-handed and right-handed throwers. This is the first study to correlate throwing velocity with a unilateral jump in the frontal plane, mimicking the action of the throwing stride.

A rationale for assessing the lower-body power profile in team sport athletes

Training at the load that maximizes peak mechanical power (Pmax) is considered superior for the development of power. We aimed to identify the Pmax load ('optimal load') in the jump squat and to quantify small, moderate, large, and very large substantial differences in power output across a spectrum of loads to identify loads that are substantially different to the optimal, and lastly, to investigate the nature of power production (load-force-velocity profiles). Professional Australian Rules Football (ARF; n = 16) and highly trained Rugby Union (RU; n = 20) players (subdivided into stronger [SP] vs. weaker [WP] players) performed jump squats across incremental loads (0-60 kg). Substantial differences in peak power (W·kg(-1)) were quantified as 0.2-2.0 of the log transformed between-athlete SD at each load, backtransformed and expressed as a percent with 90% confidence limits (CL). A 0-kg jump squat maximized peak power (ARF: 57.7 ± 10.8 W·kg(-1); RU: 61.4 ± 8.5 W·kg(-1); SP: 64.4 ± 7.5 W·kg(-1); WP: 54.8 ± 9.5 W·kg(-1)). The range for small to very large substantial differences in power output was 4.5-55.9% (CL: ×/÷1.36) and 2.8-32.4% (CL: ×/÷1.31) in ARF and RU players, whereas in SP and WP, it was 3.7-43.1% (CL: ×/÷1.32) and 4.3-51.7% (CL: ×/÷1.36). Power declined per 10-kg increment in load, 14.1% (CL: ±1.6) and 10.5% (CL: ±1.5) in ARF and RU players and 12.8% (CL: ±1.9) and 11.3% (CL: ±1.7) in SP and WP. The use of a 0-kg load is superior for the development of jump squat maximal power, with moderate to very large declines in power output observed at 10- to 60-kg loads. Yet, performance of heavier load jump squats that are substantially different to the optimal load are important in the development of sport-specific force-velocity qualities and should not be excluded.

One-step amino-functionalization of milled carbon fibre for enhancement of thermo-physical properties of epoxy composites

Development of new chemical approaches for preparation of engineered carbon-based fillers is critical for high-performance applications. Herein, an efficient method for covalent functionalization of polyacrylonitrile-based carbon fibre through azo radical addition under mild condition is demonstrated. In this way, isobutyronitrile radicals in situ produced from thermal decomposition of 2,2′-azobisisobutyronitrile (AIBN), were covalently grafted on milled carbon fibre (MCF) surface, assisted by microwave irradiation, as evidenced by FTIR, Raman, and TGA analysis. The grafted isobutyronitriles on MCF surface (n-MCF) were applied for further MCF amino-functionalization (a-MCF) via nucleophilic reaction of an amine-rich compound. Then, both pure MCF and a-MCF were incorporated into epoxy matrix; and its curing process and thermo-physical properties were investigated using DSC, rheometry, DMA, TGA, and flexural analysis. The Tg and flexural strength of epoxy/a-MCF composites, compared to epoxy/MCF, increased by ∼3.5% and ∼10.2%, resulting from good adhesion between a-MCF and epoxy matrix which confirmed by SEM observations.

CHARACTERIZATION OF THERMAL AND MECHANICAL PROPERTIES OF POLYPROPYLENE–BASED COMPOSITES FOR FUEL CELL BIPOLAR PLATES AND DEVELOPMENT OF EDUCATIONAL TOOLS IN HYDROGEN AND FUEL CELL TECHNOLOGIES

In this project we developed conductive thermoplastic resins by adding varying amounts of three different carbon fillers: carbon black (CB), synthetic graphite (SG) and multi–walled carbon nanotubes (CNT) to a polypropylene matrix for application as fuel cell bipolar plates. This component of fuel cells provides mechanical support to the stack, circulates the gases that participate in the electrochemical reaction within the fuel cell and allows for removal of the excess heat from the system. The materials fabricated in this work were tested to determine their mechanical and thermal properties. These materials were produced by adding varying amounts of single carbon fillers to a polypropylene matrix (2.5 to 15 wt.% Ketjenblack EC-600 JD carbon black, 10 to 80 wt.% Asbury Carbons’ Thermocarb TC-300 synthetic graphite, and 2.5 to 15 wt.% of Hyperion Catalysis International’s FIBRILTM multi-walled carbon nanotubes) In addition, composite materials containing combinations of these three fillers were produced. The thermal conductivity results showed an increase in both through–plane and in–plane thermal conductivities, with the largest increase observed for synthetic graphite. The Department of Energy (DOE) had previously set a thermal conductivity goal of 20 W/m·K, which was surpassed by formulations containing 75 wt.% and 80 wt.% SG, yielding in–plane thermal conductivity values of 24.4 W/m·K and 33.6 W/m·K, respectively. In addition, composites containing 2.5 wt.% CB, 65 wt.% SG, and 6 wt.% CNT in PP had an in–plane thermal conductivity of 37 W/m·K. Flexural and tensile tests were conducted. All composite formulations exceeded the flexural strength target of 25 MPa set by DOE. The tensile and flexural modulus of the composites increased with higher concentration of carbon fillers. Carbon black and synthetic graphite caused a decrease in the tensile and flexural strengths of the composites. However, carbon nanotubes increased the composite tensile and flexural strengths. Mathematical models were applied to estimate through–plane and in–plane thermal conductivities of single and multiple filler formulations, and tensile modulus of single–filler formulations. For thermal conductivity, Nielsen’s model yielded accurate thermal conductivity values when compared to experimental results obtained through the Flash method. For prediction of tensile modulus Nielsen’s model yielded the smallest error between the predicted and experimental values. The second part of this project consisted of the development of a curriculum in Fuel Cell and Hydrogen Technologies to address different educational barriers identified by the Department of Energy. By the creation of new courses and enterprise programs in the areas of fuel cells and the use of hydrogen as an energy carrier, we introduced engineering students to the new technologies, policies and challenges present with this alternative energy. Feedback provided by students participating in these courses and enterprise programs indicate positive acceptance of the different educational tools. Results obtained from a survey applied to students after participating in these courses showed an increase in the knowledge and awareness of energy fundamentals, which indicates the modules developed in this project are effective in introducing students to alternative energy sources.

Análisis de anomalías gravimétricas y modelación cortical 2D de la región volcánica del Campo de Calatrava (Ciudad Real, España)

La región volcánica de Campo de Calatrava se ha interpretado como un proceso de volcanismo intraplaca desarrollado durante el Neógeno. Se han propuesto dos modelos geodinámicos contrapuestos para explicar el origen de este volcanismo: a) un proceso de rifting en un contexto extensional con un adelgazamiento localizado de corteza; b) un proceso flexural de la litosfera en un contexto compresivo débil sin adelgazamiento de corteza. El análisis de las anomalías gravimétricas de Bouguer y una modelización gravimétrica 2D a escala cortical contribuyen a discriminar entre los modelos geodinámicos propuestos para el origen del volcanismo. Los modelos gravimétricos se han constreñido en base a los estudios sísmicos profundos existentes en la zona y a la cartografía geológica regional. Los modelos gravimétricos descartan un adelgazamiento cortical, lo que cuestiona el modelo de rifting abortado y apoyan la hipótesis alternativa del proceso flexural de la litosfera en régimen compresivo débil como origen del volcanismo bético.

Adherence to therapeuthic regimen and metabolic control of type 1 diabetes

Abstract Objectives: To assess the adherence to therapeutic regimen; to determine the Hemoglobin Glycation Index (HbA1c); to analyse the relationship that exists between the adherence to therapeutic regimen and metabolic control. Design: correlational analytical study, carried out according to a cross-sectional perspective. Participants: A non-probabilistic sample of 266 people with type 1 diabetes aged between 18 and 78 years old (mean M = 51.02 ± SD = 18.710), attending follow-up diabetes consultations. Mostly male individuals (51.88%), with low schooling level (50.75% had only inished elementar school). Measuring Instruments: We used the following data collection tools: a questionnaire on clinical and socio-demographic data, blood analysis of venous blood to determine the glycated hemoglobin level (HbA1c).Three self-report scales were used: Accession to Diabetes Treatment (Matos, 1999), Self-perception Scale (Vaz Serra, 1986) and Social Support Scale (Matos & Rodrigues, 2000). Results: In a sample in which the mean disease duration is 12.75 years, 69.17% of the sample run glycemic control tests between once a day and four times a year and 42.86% of them undergo insulin treatment. In the last 3 weeks, 26.32% of these people have experienced an average of 4.22 to 44.36%, hypoglycemic crises and experienced an average of 6.18 hyperglycemic crises. 57% of the individuals have showed a poor metabolic control (mean HbA1c higher than 7.5% (HbA1c mean M ≥ 7.50%). The mean psychosocial proile revealed individuals who show a decent self-esteem (M = 70.81) and acceptable social support (M = 58.89). Conclusions: The results suggest we should develop a kind of investigation that could be used to monitor the strenght of the mediation effect effect of the psychosocial predictive dimension of the adherence, since it has become essential to support a multidisciplinary approach which center lays in the promotion of a co-responsible self-management from the person who suffers from diabetes. This will enable a better quality of life; fewer years of people’s lives lost prematurely and a better health with less economical costs for citizens and healthcare systems.