Pré-hidrólise ácida de bagaço de cana-de-açúcar e sua caracterização físico-química

The biomass resulting from processing sugarcane bagasse has been considered a source of cellulose with the potential production of bio-fuels. This lignocellulose can be processed into ethanol since is hydrolyzed by chemical processes (acids) or biotechnology (enzymes) which generate sugars suit for fermentation. This study had the objective to utilize physical and chemical pre-treatment processes for prehydrolysis of sugarcane bagasse. The experimental treatment was adjusted at a factor of 4 X 2, by the combination of pre-hydrolysis timing (15, 30, 45 and 60 minutes) and sulfuric acid concentrations (7.0% and 9.0%) which was incubated at a temperature of 121° C in an autoclave. The treatment data was subjected to analysis of the variance and averages which were compared using the Tukey test with a probability of 5%. The results obtained showed that through pretreatment acid applied on the lignocellulose material, there was a significant break from the substrate fibers like cellulose, hemicellulose and lignin.

Efeito de dois sistemas de manejo do solo nas propriedades físico-hídricas, desenvolvimento radicular e produtividade do milho

Corn cultivation is part of crop rotation used by irrigation farmers from the southwestern region of São Paulo state, Brazil, who use no-tillage soil management as a kind of sustainable use of soil. The effect of this conservative practice on physical and hydrical properties of the soil, root development and corn crop yield compared to the conventional management was the objective of this work. The experiment was held at the Buriti-Mirim Farm, Angatuba, SP, Brazil, using an irrigated area with a center pivot system and two types of soil management: conventional and no-tillage systems. Although the no-tillage management had higher soil density and less water availability, no significant difference was found for both management systems concerning soil resistance to penetration, root development and crop yield. In both systems of soil management, 90% of roots were concentrated in the first 0-20cm of soil layer.

Influência dos espaçamentos de plantio da cultura de cana-de-açúcar (Saccharum spp) nos atributos físico-hídricos do solo

The evolution of sugar cane mechanized harvesting made the sector to question the current row spacing used due to its influence on soil compaction. The aim of this study was to evaluate the soil hydro-physical attributes in two row spacings after the farm machinery traffic. The treatments were conducted in a randomized block design with twelve repetitions, being subjected to the variance analyze in double factorial arrangement. The bulk density, the gravimetric water content, and the soil cone index along the position of crop lines (LC) and 0,1m from the row (LP) at the range of depth of 0 to 0.2m and 0.2 to 0.4m were assessed in both row spacings after the fourth harvest season. The results showed that the row spacings of 1.4 and 1.5m did not affect the values of bulk density and gravimetric water content of the soil in all ranges of depth and sample positions studied. However, in the depth range of 0.2 to 0.4 m, the values of soil cone index (IC) in the row spacing of 1.5 m were higher than the values in row spacing of 1.4 m, at both sampling positions. Regardless of row spacing and sample position, the values of soil cone index in the depth range of 0.2 to 0.4m were higher than the depth range of 0 to 0.2m.

Características Físico-Químicas, energéticas e desempenho da fibra de coco na sorção de óleo diesel e biodiesel

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Caracterização físico-química e avaliação energética de geléia elaborada em diferentes tipos de tachos com polpa e suco de acerola

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Composição físico-química e propriedades tecnológicas da farinha de folhas de mandioca

Cassava leaves can be considered an important nutritional source when compared to other commonly consumed vegetables leaves. Cassava leaves have high levels of protein, fiber and minerals, and arestill underexplored due to the lack of information regarding the use of them as afood product, as well as, their use as an industrial raw material. The consumption of cassava leaves in fresh form is impractical due to the presence of cyanide, thereby it is required a pretreatment to be performed to reduce this component. The objective of this study was to produce and characterize the four made with cassava leaves as its chemical composition, color, indices of absorption and water solubility, and pasting properties, aiming to provide information of interest for possible application as an ingredient in the food industry. Cassava leaf flour showed low moisture content (6.6 %)and significant amounts of fiber (30.68 %), protein (23.00 %), and total carbohydrate (22.27%). Drying and milling processes allowed to obtain a flour with a low content of total cyanide (0.3 mg 100g-1 ), and the presence of vitamin C (56.6 mg 100g-1 ) and β –carotene (38 mg 100g- 1 ). The color analysis of cassava leaf flour showed low lightness with, predominantly, green and yellow pigments. The cassava leaf flour presented good solubility (14.85 %) and water absorption (6.87 g gel. g-1 ). Pasting properties showed a low peak of viscosity and a higher final viscosity with a retrogradation tendency, indicating a low capacity of this flour to form gel. The flour of cassava leaves can be a good source of nutrition when used as a food ingredient in soups and pasta. However, it is not indicated to products that require high gel formation.

Composição físico-química e cor de clones de mandioquinha-salsa

This study aimed to characterize the physical and chemical composition of ten items of arracacha grown in the municipality of São Manuel for the 2009 harvest. In the roots of the clones BGH (4560, 5741, 5744, 5746, 5747, 6414, 6513, 6525 and 7609) and the cultivar Amarela de Senador Amaral the characteristics evaluated were: color (L *, a * and b *) and moisture, ash, crude fiber, raw grease, protein, reducing sugars, total sugars and starch. After obtaining the data, an analysis was performed for the variance of test F and comparisons between the means made by the Tukey test at 5% probability. There was no significant difference to the results of luminosity (L *) while BGH 6414 and BGH 5744 showed the highest values for chroma and * BGH 5741, BGH 6414, BGH 7609, 'Amarela de Senador Amaral' BGH 5747 presented the highest chroma values for b *. Clones BGH 7609 and BGH 6414 showed significantly higher levels of dry matter and with the potential yield of agro-industrial processes it would be best suited in the form of frying. The materials that showed significantly larger amounts of ash were BGH 6525, BGH 5747, 'Amarela de Senador Amaral ", BGH 4560, BGH 5746, BGH 6513. Regarding the contents of fatty matter BGH 6525, BGH 5741 and BGH 5744 showed the highest levels. The results of BGH 7609 showed crude fiber significantly higher than the other materials tested, it can be used in diets composed of fibers. BGH 4560 and cultivar had the highest crude protein. BGH 5741 showed the lowest reducing sugar content among the clones, but not significantly different from results found for the cultivar. All clones showed total sugar levels were higher in the cultivar, which may have more flavor. BGH 5741, BGH 5746, BGH 6525 and BGH 6513 showed significantly higher starch content than the cultivar Amarela de Senador Amaral. From these results we conclude that the clones have similar color characteristics, and are potentially a nutritionally adequate substitute for the cultivar.

Planejamento do meio físico a partir de uma abordagem da técnica de capacidade de uso da terra na sub-bacia dso Rio das Pedras - Itatinga - SP

The study aimed mapping of the land use capacity classes for the Rio das Pedras watershed, Itatinga-SP in order to provide another mechanism of environmental planning for the studied area. It was used 1:10,000 topographic letters for the slope map generation which was overlaid with the studied area soil map. It was applied the judgment table criteria method, for generation of land use capacity map of the studied area. It were identified the following results: First, class III with constraints in relation of low fertility and restrictions about erosion risks on high slope areas. Second, class VI with the same characteristics of class III however with the presence of an aggravating factor of sand texture in all horizons, resulting in high risks of erosion events, especially in high slopes areas, and contamination by pollutants due the high soil permeability. Conclusions: It was verified that the more critical regions for land use capacity classes were VIs and mainly VIes class. The last one has more high relief areas and the presence of Neossolo Quartzarenico soil, with a big erosion propensity. The land use capacity map allow making different decisions for each region of the watershed respecting their individual characteristics.

Suco integral de amora (Morus nigra L.) obtido através de prensagem e despolpamento: rendimento e caracterização físico-química

Mulberry (Morus nigra L.) is a fruit with a great potential for technological uses, which could be employed to manufacture of syrups, ice cream, candies, yoghurts, beverages, jam, etc. Only the leaf from mulberry trees is commercially used for silkworm feeding. This tree is cultivated on many agricultural environments such as small rural proprieties and settlements. Small farmers waste a great amount of their production for not knowing about mulberry technology. Thus, the objective of this work was to access extraction yield and physical-chemical properties of mulberry whole juice from ripe, green and a mixture of both by using press and depulper. Statistical analysis of results was carried by media and standard deviation calculations. 173 kg of mulberry were picked being 49.31% ripe and 50.68% green. Press delivered greater extraction yield of whole juice (80.50% to 81.60%) when compared to press (71.43% to 77.50%). Whole juice obtained from both equipments has shown the following values: soluble solids 7.45% - 12.11%, titrable acidity 0.45 – 1.23%, ratio 6.03 – 26.84, pH 3.69 – 4.35, total reducing sugar 4.05% – 9.96%, reducing sugar 3.95% - 9.15%, sucrose 0.00% - 0.04%, turbidity 221.25 NTU - >4,000 NTU. Whole juices obtained from both equipments has shown similar physical-chemical characteristics except turbidity. The authors concluded that press was the best extraction equipment due to its greater yield and whole juice quality regarding turbidity

Estabilidade físico-química de um produto de abacate acondicionado em diferentes embalagens e conservado pelo frio

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Avaliação da prática de exercício físico (natação) de intensidade moderada no estresse oxidativo, hormônios sexuais e proliferação pancreática de ratas diabéticas prenhes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influência de diferentes tratamentos físico-químicos na adesão e viabilidade de fibroblastos de ligamento periodontal à superfície radicular simulando dentes avulsionados

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Impacto do exercício físico combinado na função diastólica de pacientes com insuficiência cardíaca e fração de ejeção reduzida

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito do treinamento físico aeróbio na reatividade vascular da artéria ilíaca em camundongos LDL-/-

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Testes convencionais e empregando Micro-CT na avaliação de propriedades físico-químicas de materiais retrobturadores e cimentos endodônticos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)