Some like it wet - biological characteristics underpinning tolerance of extreme water stress events in Antarctic bryophytes

Antarctic bryophyte communities presently tolerate physiological extremes in water availability, surviving both desiccation and submergence events. We investigated the relative ability of three Antarctic moss species to tolerate physiological extremes in water availability and identified physiological, morphological, and biochemical characteristics that assist species performance under such conditions. Tolerance of desiccation and submergence was investigated using chlorophyll fluorescence during a series of field- and laboratory-based water stress events. Turf water retention and degree of natural habitat submergence were determined from gametophyte shoot size and density, and delta C-13 signatures, respectively. Finally, compounds likely to assist membrane structure and function during desiccation events (fatty acids and soluble carbohydrates) were determined. The results of this study show significant differences in the performance of the three study species under contrasting water stress events. The results indicate that the three study species occupy distinctly different ecological niches with respect to water relations, and provide a physiological explanation for present species distributions. The poor tolerance of submergence seen in Ceratodon purpureus helps explain its restriction to drier sites and conversely, the low tolerance of desiccation and high tolerance of submergence displayed by the endemic Grimmia antarctici is consistent with its restriction to wet habitats. Finally the flexible response observed for Bryum pseudotriquetrum is consistent with its co-occurrence with the other two species across the bryophyte habitat spectrum. The likely effects of future climate change induced shifts in water availability are discussed with respect to future community dynamics.

Assembly processes of invertebrate communities in springs across different spatial scales

Il presente lavoro ha lo scopo di comprendere i processi sottesi ai pattern di coesistenza tra le specie di invertebrati sorgentizi, distinguendo tra dinamiche stocastiche e deterministiche. Le sorgenti sono ecosistemi complessi e alcune loro caratteristiche (ad esempio l’insularità, la stabilità termica, la struttura ecotonale “a mosaico”, la frequente presenza di specie rare ed endemiche, o l’elevata diversità in taxa) le rendono laboratori naturali utili allo studio dei processi ecologici, tra cui i processi di assembly. Al fine di studiare queste dinamiche è necessario un approccio multi-scala, per questo motivi sono state prese in considerazione tre scale spaziali. A scala locale è stato compiuto un campionamento stagionale su sette sorgenti (quattro temporanee e tre permanenti) del Monte Prinzera, un affioramento ofiolitico vicino alla città di Parma. In questa area sono stati valutati l’efficacia e l’impatto ambientale di diversi metodi di campionamento e sono stati analizzati i drivers ecologici che influenzano le comunità. A scala più ampia sono state campionate per due volte 15 sorgenti della regione Emilia Romagna, al fine di identificare il ruolo della dispersione e la possibile presenza di un effetto di niche-filtering. A scala continentale sono state raccolte informazioni di letteratura riguardanti sorgenti dell’area Paleartica occidentale, e sono stati studiati i pattern biogeografici e l’influenza dei fattori climatici sulle comunità. Sono stati presi in considerazione differenti taxa di invertebrati (macroinvertebrati, ostracodi, acari acquatici e copepodi), scegliendo tra quelli che si prestavano meglio allo studio dei diversi processi in base alle loro caratteristiche biologiche e all’approfondimento tassonomico raggiungibile. I campionamenti biologici in sorgente sono caratterizzati da diversi problemi metodologici e possono causare impatti sugli ambienti. In questo lavoro sono stati paragonati due diversi metodi: l’utilizzo del retino con un approccio multi-habitat proporzionale e l’uso combinato di trappole e lavaggio di campioni di vegetazione. Il retino fornisce dati più accurati e completi, ma anche significativi disturbi sulle componenti biotiche e abiotiche delle sorgenti. Questo metodo è quindi raccomandato solo se il campionamento ha come scopo un’approfondita analisi della biodiversità. D’altra parte l’uso delle trappole e il lavaggio della vegetazione sono metodi affidabili che presentano minori impatti sull’ecosistema, quindi sono adatti a studi ecologici finalizzati all’analisi della struttura delle comunità. Questo lavoro ha confermato che i processi niche-based sono determinanti nello strutturare le comunità di ambienti sorgentizi, e che i driver ambientali spiegano una rilevante percentuale della variabilità delle comunità. Infatti le comunità di invertebrati del Monte Prinzera sono influenzate da fattori legati al chimismo delle acque, alla composizione e all’eterogeneità dell’habitat, all’idroperiodo e alle fluttuazioni della portata. Le sorgenti permanenti mostrano variazioni stagionali per quanto riguarda le concentrazioni dei principali ioni, mentre la conduttività, il pH e la temperatura dell’acqua sono più stabili. È probabile che sia la stabilità termica di questi ambienti a spiegare l’assenza di variazioni stagionali nella struttura delle comunità di macroinvertebrati. L’azione di niche-filtering delle sorgenti è stata analizzata tramite lo studio della diversità funzionale delle comunità di ostracodi dell’Emilia-Romagna. Le sorgenti ospitano più del 50% del pool di specie regionale, e numerose specie sono state rinvenute esclusivamente in questi habitat. Questo è il primo studio che analizza la diversità funzionale degli ostracodi, è stato quindi necessario stilare una lista di tratti funzionali. Analizzando il pool di specie regionale, la diversità funzionale nelle sorgenti non è significativamente diversa da quella misurata in comunità assemblate in maniera casuale. Le sorgenti non limitano quindi la diversità funzionale tra specie coesistenti, ma si può concludere che, data la soddisfazione delle esigenze ecologiche delle diverse specie, i processi di assembly in sorgente potrebbero essere influenzati da fattori stocastici come la dispersione, la speciazione e le estinzioni locali. In aggiunta, tutte le comunità studiate presentano pattern spaziali riconoscibili, rivelando una limitazione della dispersione tra le sorgenti, almeno per alcuni taxa. Il caratteristico isolamento delle sorgenti potrebbe essere la causa di questa limitazione, influenzando maggiormente i taxa a dispersione passiva rispetto a quelli a dispersione attiva. In ogni caso nelle comunità emiliano-romagnole i fattori spaziali spiegano solo una ridotta percentuale della variabilità biologica totale, mentre tutte le comunità risultano influenzate maggiormente dalle variabili ambientali. Il controllo ambientale è quindi prevalente rispetto a quello attuato dai fattori spaziali. Questo risultato dimostra che, nonostante le dinamiche stocastiche siano importanti in tutte le comunità studiate, a questa scala spaziale i fattori deterministici ricoprono un ruolo prevalente. I processi stocastici diventano più influenti invece nei climi aridi, dove il disturbo collegato ai frequenti eventi di disseccamento delle sorgenti provoca una dinamica source-sink tra le diverse comunità. Si è infatti notato che la variabilità spiegata dai fattori ambientali diminuisce all’aumentare dell’aridità del clima. Disturbi frequenti potrebbero provocare estinzioni locali seguite da ricolonizzazioni di specie provenienti dai siti vicini, riducendo la corrispondenza tra gli organismi e le loro richieste ambientali e quindi diminuendo la quantità di variabilità spiegata dai fattori ambientali. Si può quindi concludere che processi deterministici e stocastici non si escludono mutualmente, ma contribuiscono contemporaneamente a strutturare le comunità di invertebrati sorgentizi. Infine, a scala continentale, le comunità di ostracodi sorgentizi mostrano chiari pattern biogeografici e sono organizzate lungo gradienti ambientali principalmente collegati altitudine, latitudine, temperatura dell’acqua e conducibilità. Anche la tipologia di sorgente (elocrena, reocrena o limnocrena) è influente sulla composizione delle comunità. La presenza di specie rare ed endemiche inoltre caratterizza specifiche regioni geografiche.

Integrated project evaluation and selection using multiple-attribute decision-making technique

The evaluation and selection of industrial projects before investment decision is customarily done using marketing, technical and financial information. Subsequently, environmental impact assessment and social impact assessment are carried out mainly to satisfy the statutory agencies. Because of stricter environment regulations in developed and developing countries, quite often impact assessment suggests alternate sites, technologies, designs, and implementation methods as mitigating measures. This causes considerable delay to complete project feasibility analysis and selection as complete analysis requires to be taken up again and again till the statutory regulatory authority approves the project. Moreover, project analysis through above process often results sub-optimal project as financial analysis may eliminate better options, as more environment friendly alternative will always be cost intensive. In this circumstance, this study proposes a decision support system, which analyses projects with respect to market, technicalities, and social and environmental impact in an integrated framework using analytic hierarchy process, a multiple-attribute decision-making technique. This not only reduces duration of project evaluation and selection, but also helps select optimal project for the organization for sustainable development. The entire methodology has been applied to a cross-country oil pipeline project in India and its effectiveness has been demonstrated. © 2005 Elsevier B.V. All rights reserved.

Decision support system for project selection

The evaluation and selection of industrial projects before investment decision is customarily done using marketing, technical, and financial information. Subsequently, environmental impact assessment and social impact assessment are carried out mainly to satisfy the statutory agencies. Because of stricter environment regulations in developed and developing countries, quite often impact assessment suggests alternate sites, technologies, designs, and implementation methods as mitigating measures. This causes considerable delay to complete project feasibility analysis and selection as complete analysis requires to be taken up again and again until the statutory regulatory authority approves the project. Moreover, project analysis through the above process often results in suboptimal projects as financial analysis may eliminate better options as more environment friendly alternative will always be cost intensive. In this circumstance, this study proposes a decision support system which analyses projects with respect to market, technicalities, and social and environmental impact in an integrated framework using analytic hierarchy process, a multiple attribute decision-making technique. This not only reduces duration of project evaluation and selection, but also helps select an optimal project for the organization for sustainable development. The entire methodology has been applied to a cross-country oil pipeline project in India and its effectiveness has been demonstrated. © 2008, IGI Global.

Using an experiential business game to stimulate sustainable thinking in marketing education

Recent years have seen a significant increase in the importance of environmental protection and sustainability to consumers, policy makers, and society in general. Reflecting this, most organizations are at least aware of this new agenda and wish to be seen as taking steps to improve behaviors in this regard. However, there appears to be a gap between this evolving agenda and the comparatively low level of knowledge that marketing managers actually have of the environmental impact of their own functional decisions. We suggest that this low knowledge level may be due, in part, to the marketplace focus of foundational marketing educational programs, and we attempt to show how broadening the horizons of marketing courses can help students (i.e., future managers) more deeply understand the environmental consequences of their actions. We demonstrate the use of a novel business game, based on the Life Cycle Assessment method, as the foundational cornerstone for the development of a broad understanding of the environmental impact of marketing decisions and actions for the entire life cycle of a product—from raw material extraction to ultimate disposal. The results of an empirical study show that this approach increases students’ appreciation for, and understanding of, these fundamental environmental sustainability concepts.

Purchasing green transport and logistics services:implications for small business

Considering its strong environmental impact, logistics plays a critical role in green supply chain management. It provides strategic links in the supply chain and is an essential function in the delivery of green products to the consumer. There is a general consensus on the fact that more environmentally sustainable companies may be achieved only if transport and logistics activities also become greener. To achieve this objective, buyer companies need to incorporate green considerations in the purchasing of transport and logistics services. This appears particularly challenging for small and medium sized enterprises (SMEs) because of their traditional lack of managerial, organisational and financial resources that often result in failure to adopt an environmental perspective. In the extant literature, green purchasing has received increased attention over the past decade and the strategic importance of introducing green aspects into purchasing practices has been recognised. However, little has been written in relation to purchasing green transport and logistics services. The aim of this paper is to explore practices in the buying of green transport and logistics services and to derive implications for small buyer companies. The paper analyses how general environmental company ambitions and environmental purchasing practices are reflected when green transport and logistics services are purchased in three different European countries (Italy, Ireland and Sweden) using a multiple case study research approach. The results of the paper indicate that while the case companies show a relatively high concern for green issues at corporate level, a lower importance is attributed to green issues at the purchasing function level. When green concerns in the purchasing of transport and logistics services are analysed the level of importance decreases further. Thus, a conflicting attitude is evident between the overall corporate level and the purchasing of transport and logistics services specifically. This suggests that there is potential for improvement especially in the area of green collaboration in buyer and supplier relationships.

An integrated assessment model for cross-country pipelines

The cross-country petroleum pipelines are environmentally sensitive because they traverse through varied terrain covering crop fields, forests, rivers, populated areas, desert, hills and offshore. Any malfunction of these pipelines may cause devastating effect on the environment. Hence, the pipeline operators plan and design pipelines projects with sufficient consideration of environment and social aspects along with the technological alternatives. Traditionally, in project appraisal, optimum technical alternative is selected using financial analysis. Impact assessments (IA) are then carried out to justify the selection and subsequent statutory approval. However, the IAs often suggest alternative sites and/or alternate technology and implementation methodology, resulting in revision of entire technical and financial analysis. This study addresses the above issues by developing an integrated framework for project feasibility analysis with the application of analytic hierarchy process (AHP), a multiple attribute decision-making technique. The model considers technical analysis (TA), socioeconomic IA (SEIA) and environmental IA (EIA) in an integrated framework to select the best project from a few alternative feasible projects. Subsequent financial analysis then justifies the selection. The entire methodology has been explained here through a case application on cross-country petroleum pipeline project in India.

Corporate environmental responsibility and accountability:what chance in vulnerable Bangladesh?

Bangladesh has recently been enjoying significant economic growth mainly arising from an export led development strategy. However, in that process its natural environment has been degraded and become more vulnerable in geophysical terms (e.g. environmental pollution). Much of the Bangladeshi population are also vulnerable in socio-economic terms due primarily to widespread poverty. In this context we ask, albeit sceptically, whether there is any chance of holding corporations to account for their environmental responsibilities. Using the notions of vulnerability and ecological rifts we answer this question by providing evidence from published sources and a series of 32 semi-structured interviews with Bangladeshi stakeholder groups. Key findings include, inter alia, corporate reluctance to take responsibility for the environmental impact of their activities. Our interviewees discuss the possibility of a role for mandatory corporate reporting in enhancing corporate accountability and we argue that this is essential if the contradictions and irrationalities of the globalized capitalist system are to be made visible. Achieving such accountability, however, will not be easy due to a lack of political will and the prohibitive costs involved. Incurring such costs could raise the dangerous prospect of Bangladesh losing business to other, less regulated, economies.

Educating for sustainability in language degrees:a tale of 2 case-studies

Purpose According to the 2014 joint report drafted by the Quality Assurance Agency and Higher Education Academy (QAA/HEA), universities have a key role to play in the development of sustainability literate graduates who can contribute to an environmentally responsible society. In this paper, the authors aim to assess language students’ understanding of sustainable development (SD) issues. Design/methodology/approach Study 1 surveys two cohorts of final year language students about to enter the graduate job market, and Study 2 surveys first year language students before and after the inclusion of SD content in one of their modules. The questions to the students are provided along with qualitative and quantitative results. Findings Results suggest that only 48% of language graduates are currently aware that they will need to take account of the environmental impact of their work as professional practitioners, and 52% do not consider it appropriate to learn about SD during their degree. However, results also suggest that incorporating SD early on in the language curriculum could contribute positively to the development of sustainability literate graduates. Originality/value While many language departments are aware of the importance of integrating sustainability into their curricula, and while employers are increasingly demanding sustainability literate graduates, there is little evidence that language students leave university with a real understanding of sustainability issues. This paper presents evidence of the current situation as well as a novel way to integrate sustainability into the language curriculum in order to remedy the situation.

Methyl chloride purification for the silicone industry

This study experimentally investigated methyl chloride (MeCl) purification method using an inhouse designed and built volumetric adsorption/desorption rig. MeCl is an essential raw material in the manufacture of silicone however all technical grades of MeCl contain concentrations (0.2 - 1.0 % wt) of dimethyl ether (DME) which poison the process. The project industrial partner had previously exhausted numerous separation methods, which all have been deemed not suitable for various reasons. Therefore, adsorption/desorption separation was proposed in this study as a potential solution with less economic and environmental impact. Pure component adsorption/desorption was carried out for DME and MeCl on six different adsorbents namely: zeolite molecular sieves (types 4 Å and 5 Å); silica gels (35-70 mesh, amorphous precipitated, and 35-60 mesh) and granular activated carbon (type 8-12 mesh). Subsequent binary gas mixture adsorption in batch and continuous mode was carried out on both zeolites and all three silica gels following thermal pre-treatment in vacuum. The adsorbents were tested as received and after being subjected to different thermal and vacuum pre-treatment conditions. The various adsorption studies were carried out at low pressure and temperature ranges of 0.5 - 3.5 atm and 20 - 100 °C. All adsorbents were characterised using Brunauer Emmett Teller (BET), thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and energy dispersive x-ray analysis (EDXA) to investigate their physical and chemical properties. The well-known helium (He) expansion method was used to determine the empty manifold and adsorption cell (AC) regions and respective void volumes for the different adsorbents. The amounts adsorbed were determined using Ideal gas laws via the differential pressure method. The heat of adsorption for the various adsorbate-adsorbent (A-S) interactions was calculated using a new calorimetric method based on direct temperature measurements inside the AC. Further adsorption analysis included use of various empirical and kinetic models to determine and understand the behaviour of the respective interactions. The gas purification behaviour was investigated using gas chromatography and mass spectroscopy (GC-MC) analysis. Binary gas mixture samples were syringed from the manifold iii and AC outlet before and after adsorption/desorption analysis through manual sample injections into the GC-MS to detect and quantify the presence of DME and ultimately observe for methyl chloride purification. Convincing gas purification behaviour was confirmed using two different GC columns, thus giving more confidence on the measurement reliability. From the single pure component adsorption of DME and MeCl on the as received zeolite 4A subjected to 1 h vacuum pre-treatment, both gases exhibited pseudo second order adsorption kinetics with DME exhibiting a rate constant nearly double that of MeCl thus suggesting a faster rate of adsorption. From the adsorption isotherm classification both DME and MeCl exhibited Type II and I adsorption isotherm classifications, respectively. The strength of bonding was confirmed by the differential heat of adsorption measurement, which was found to be 23.30 and 10.21 kJ mol-1 for DME and MeCl, respectively. The former is believed to adsorb heterogeneously through hydrogen bonding whilst MeCl adsorbs homogenously via van der Waal’s (VDW) forces. Single pure component adsorption on as received zeolite 5A, silica gels (35-70, amorphous precipitated and 35-60) resulted in similar adsorption/desorption behaviour in similar quantities (mol kg-1). The adsorption isotherms for DME and MeCl on zeolite 5A, silica gels (35-70, amorphous precipitated and 35-60) and activated carbon 8-12 exhibited Type I classifications, respectively. Experiments on zeolite 5A indicated that DME adsorbed stronger, faster and with a slightly stronger strength of interaction than MeCl but in lesser quantities. On the silica gels adsorbents, DME exhibited a slightly greater adsorption capacity whilst adsorbing at a similar rate and strength of interaction compared to MeCl. On the activated carbon adsorbent, MeCl exhibited the greater adsorption capacity at a faster rate but with similar heats of adsorption. The effect of prolonged vacuum (15 h), thermal pre-treatment (150 °C) and extended equilibrium time (15 min) were investigated for the adsorption behaviour of DME and MeCl on both zeolites 4A and 5A, respectively. Compared to adsorption on as received adsorbents subjected to 1 h vacuum the adsorption capacities for DME and MeCl were found to increase by 1.95 % and 20.37 % on zeolite 4A and by 4.52 % and 6.69 % on zeolite 5A, respectively. In addition the empirical and kinetic models and differential heats of adsorption resulted in more definitive fitting curves and trends due to the true equilibrium position of the adsorbate with the adsorbent. Batch binary mixture adsorption on thermally and vacuum pre-treated zeolite 4A demonstrated purification behaviour of all adsorbents used for MeCl streams containing DME impurities, with a concentration as low as 0.66 vol. %. The GC-MS analysis showed no DME detection for the tested concentration mixtures at the AC outlet after 15 or 30 min, whereas MeCl was detectable in measurable amounts. Similar behaviour was also observed when carrying out adsorption in continuous mode. On the other hand, similar studies on the other adsorbents did not show such favourable MeCl purification behaviour. Overall this study investigated a wide range of adsorbents (zeolites, silica gels and activated carbon) and demonstrated for the first time potential to purify MeCl streams containing DME impurities using adsorption/desorption separation under different adsorbent pre-treatment and adsorption operating conditions. The study also revealed for the first time the adsorption isotherms, empirical and kinetic models and heats of adsorption for the respective adsorbentsurface (A-S) interactions. In conclusion, this study has shown strong evidence to propose zeolite 4A for adsorptive purification of MeCl. It is believed that with a technical grade MeCl stream competitive yet simultaneous co-adsorption of DME and MeCl occurs with evidence of molecular sieiving effects whereby the larger DME molecules are unable to penetrate through the adsorbent bed whereas the smaller MeCl molecules diffuse through resulting in a purified MeCl stream at the AC outlet. Ultimately, further studies are recommended for increased adsorption capacities by considering wider operating conditions, e.g. different adsorbent thermal and vacuum pre-treatment and adsorbing at temperatures closer to the boiling point of the gases and different conditions of pressure and temperature.

The Long-Term impact of Business Support? - Exploring the Role of Evaluation Timing using Micro Data

The original contribution of this work is threefold. Firstly, this thesis develops a critical perspective on current evaluation practice of business support, with focus on the timing of evaluation. The general time frame applied for business support policy evaluation is limited to one to two, seldom three years post intervention. This is despite calls for long-term impact studies by various authors, concerned about time lags before effects are fully realised. This desire for long-term evaluation opposes the requirements by policy-makers and funders, seeking quick results. Also, current ‘best practice’ frameworks do not refer to timing or its implications, and data availability affects the ability to undertake long-term evaluation. Secondly, this thesis provides methodological value for follow-up and similar studies by using data linking of scheme-beneficiary data with official performance datasets. Thus data availability problems are avoided through the use of secondary data. Thirdly, this thesis builds the evidence, through the application of a longitudinal impact study of small business support in England, covering seven years of post intervention data. This illustrates the variability of results for different evaluation periods, and the value in using multiple years of data for a robust understanding of support impact. For survival, impact of assistance is found to be immediate, but limited. Concerning growth, significant impact centres on a two to three year period post intervention for the linear selection and quantile regression models – positive for employment and turnover, negative for productivity. Attribution of impact may present a problem for subsequent periods. The results clearly support the argument for the use of longitudinal data and analysis, and a greater appreciation by evaluators of the factor time. This analysis recommends a time frame of four to five years post intervention for soft business support evaluation.

The long-term impact of business support? - Exploring the role of evaluation timing using micro data

The original contribution of this work is threefold. Firstly, this thesis develops a critical perspective on current evaluation practice of business support, with focus on the timing of evaluation. The general time frame applied for business support policy evaluation is limited to one to two, seldom three years post intervention. This is despite calls for long-term impact studies by various authors, concerned about time lags before effects are fully realised. This desire for long-term evaluation opposes the requirements by policy-makers and funders, seeking quick results. Also, current ‘best practice’ frameworks do not refer to timing or its implications, and data availability affects the ability to undertake long-term evaluation. Secondly, this thesis provides methodological value for follow-up and similar studies by using data linking of scheme-beneficiary data with official performance datasets. Thus data availability problems are avoided through the use of secondary data. Thirdly, this thesis builds the evidence, through the application of a longitudinal impact study of small business support in England, covering seven years of post intervention data. This illustrates the variability of results for different evaluation periods, and the value in using multiple years of data for a robust understanding of support impact. For survival, impact of assistance is found to be immediate, but limited. Concerning growth, significant impact centres on a two to three year period post intervention for the linear selection and quantile regression models – positive for employment and turnover, negative for productivity. Attribution of impact may present a problem for subsequent periods. The results clearly support the argument for the use of longitudinal data and analysis, and a greater appreciation by evaluators of the factor time. This analysis recommends a time frame of four to five years post intervention for soft business support evaluation.

Pollution generation in the Carajas region of Brazil: An extended input -output approach

The economic development of any region involves some consequences to the environment. The choice of a socially optimal development plan must consider a measure of the strategy's environmental impact. This dissertation tackles this problem by examining environmental impacts of new production activities. The study uses the experience of the Carajás region in the north of Brazil. This region, which prior to the 1960's was an isolated outpost of the Amazon area, was integrated to the rest of the country with a non-sophisticated but strategic road system and eventually became the second largest iron ore mining area in the world. Finally, in the 1980's, the area was linked, by way of a railroad, to the nearest seaport along the Atlantic Ocean. The consequence of such changes was a burst of economic growth along the railroad Corridor and neighboring areas. In this work, a Social Accounting Matrix (SAM) is used to construct a 2-region (Corridor and surrounding area), fixed price, Computable General Equilibrium (CGE) Model to examine the relationship between production and pollution by measuring the different pollution effects of alternative growth strategies. SAMs are a very useful tool to examine the environmental impacts of development by linking production activities to measurable indices of natural resource degradation. The simulation results suggest that the strategies leading to faster economic growth in the short run are also those that lead to faster rates of environmental degradation. The simulations also show that the strategies that leads to faster rates of short run growth do so at the price of a rate of environmental depletion that is unsustainable from a long run perspective. These results, therefore, support the concern expressed by environmental economists and policy makers regarding the possible trade-offs between economic growth and environmental preservation. This stresses the need for a careful analysis of the environmental impacts of alternative growth strategies. ^