Altura do pasto e adubação nitrogenada sobre a produção de forragem e eficiência no uso de nutrientes em sistema de integração lavoura-pecuária

The proper use of management strategies, such as grazing intensity and nitrogen fertilization are primordial to the success of integrated crop-livestock system. Several studies have demonstrated the influence of grazing intensity and nitrogen fertilization on dynamics of forage production and nutrient cycling. However, most this researches studying these strategies in isolation and little is known about the interaction of these factors in the management of an integrated crop-livestock system. In this context, the aim of this study is to determine the best management strategy involving sward height and nitrogen fertilization, permitting greater forage production and improved efficiency in the use of nitrogen soil by a black oat ‘BRS 139’ plus ryegrass ‘Barjumbo’ pasture in integrated crop-livestock system. The experiment was realized in Abelardo Luz – SC, in an area of 14 ha, where has been conducted an experiment in long term with integrated crop-livestock system under no-tillage since 2012. The experimental design is a randomized block design with three replications in a factorial design (2x2), the first factor was the grazing intensity (high and low), characterized by two sward height management (10 and 25 cm), and the second included the time factor application of N in the system: N applied on pasture (N-pasture) and N applied on the culture of grain (N-grain), at dose of 200 kg N ha stocking and variable stocking rate. The previous crop to pasture was corn. The nitrogen fertilization of pasture increased tiller density, forage density, participation of ryegrass ‘Barjumbo’ and percentage of ryegrass leaves in forage mass. Forage mass was less at low sward height on average, however the percentage of ryegrass ‘Barjumbo’ and rye leaves was greater and dead material was lower in this treatment. With nitrogen fertilization of pasture it was possible to double the amount of forage accumulated in periods with further development of ryegrass, furthermore, the total production of DM was increased in 38.4% and the shoot N concentration in 28.6%. When the nitrogen fertilization is applied in pasture, it is possible to keep black oat ‘BRS 139’ plus ryegrass ‘Barjumbo’ pasture with an average sward height of 11 cm. The residual effect of N applied at corn was not sufficient to meet the nutritional needs of pasture and the forage production was affected by periods with N deficiency, while a single application of 200 kg N ha was sufficient to meet the N requirements throughout the forage accumulation period. The black oat ‘BRS 139’ plus ryegrass ‘Barjumbo’ pasture is efficient in use and recovery of the nitrogen applied in both treatments of sward height.

Desenvolvimento de um flotador industrial

A presente dissertação apresenta uma investigação teórica e prática na área de Engenharia e Design de Produto com o objetivo principal de desenvolver um Flotador Industrial para a Adventech, procurando indicadores inovadores, competitivos e focando a necessidade de encontrar uma solução que reflita numa relação entre necessidade, utilizador, performance e design. Desta forma, no presente trabalho cruzam-se temas como a Engenharia e o Design de Produto, Tratamentos de Efluentes Líquidos e Flotação de modo a introduzir e compreender o desenvolvimento deste equipamento. Foi efetuada uma pesquisa sobre o tema para compreender, as suas características e limitações, bem como as formas e mecanismos utilizados para dar resposta aos requisitos e produzir um produto eficiente e eficaz. Paralelamente realizou-se uma abordagem teórica sobre Design de Produto e Processo de Flotação, de modo a conhecer o seu desenvolvimento e as suas restrições, preocupações e objetivos. Complementou-se o trabalho desenvolvido com pesquisa e analisaram-se os produtos existentes na concorrência com o objetivo de conhecer características técnicas, funcionais e físicas. Desta forma, o estudo desenvolvido nesta dissertação serviu e auxiliou o projeto no resultado final, incluindo a materialização do conceito para proporcionar uma boa relação entre utilizador, performance e design. Obtendo assim, um resultado final com características adequadas nas diversas aplicações deste produto nas Estações de Águas Residuais, reduzindo custos de operação e manutenção, eficiência do processo de flotação e vida útil do produto. Paralelamente o design proporciona uma apresentação estética do produto que transmite fiabilidade e profissionalismo.

Acousto-optic modulation of optical reflection properties in fiber Bragg gratings and the application in fiber lasers

This thesis aims to investigate the interaction of acoustic waves and fiber Bragg gratings (FBGs) in standard and suspended-core fibers (SCFs), to evaluate the influence of the fiber, grating and modulator design on the increase of the modulation efficiency, bandwidth and frequency. Initially, the frequency response and the resonant acoustic modes of a low frequency acousto-optic modulator (f < 1.2 MHz) are numerically investigated by using the finite element method. Later, the interaction of longitudinal acoustic waves and FBGs in SCFs is also numerically investigated. The fiber geometric parameters are varied and the strain and grating properties are simulated by means of the finite element method and the transfer matrix method. The study indicates that the air holes composing the SCF cause a significant reduction of the amount of silica in the fiber cross section increasing acousto-optic interaction in the core. Experimental modulation of the reflectivity of FBGs inscribed in two distinct SCFs indicates evidences of this increased interaction. Besides, a method to acoustically induce a dynamic phase-shift in a chirped FBG employing an optimized design of modulator is shown. Afterwards, a combination of this modulator and a FBG inscribed in a three air holes SCF is applied to mode-lock an ytterbium doped fiber laser. To improve the modulator design for future applications, two other distinct devices are investigated to increase the acousto-optic interaction, bandwidth and frequency (f > 10 MHz). A high reflectivity modulation has been achieved for a modulator based on a tapered fiber. Moreover, an increased modulated bandwidth (320 pm) has been obtained for a modulator based on interaction of a radial long period grating (RLPG) and a FBG inscribed in a standard fiber. In summary, the results show a considerable reduction of the grating/fiber length and the modulator size, indicating possibilities for compact and faster acousto-optic fiber devices. Additionally, the increased interaction efficiency, modulated bandwidth and frequency can be useful to shorten the pulse width of future all-fiber mode-locked fiber lasers, as well, to other photonic devices which require the control of the light in optical fibers by electrically tunable acoustic waves.

Espectroscopia no infravermelho e método quimiométrico para a pesquisa de antimicrobianos em leite da microrregião de Pato Branco - PR

Considering the social and economic importance that the milk has, the objective of this study was to evaluate the incidence and quantifying antimicrobial residues in the food. The samples were collected in dairy industry of southwestern Paraná state and thus they were able to cover all ten municipalities in the region of Pato Branco. The work focused on the development of appropriate models for the identification and quantification of analytes: tetracycline, sulfamethazine, sulfadimethoxine, chloramphenicol and ampicillin, all antimicrobials with health interest. For the calibration procedure and validation of the models was used the Infrared Spectroscopy Fourier Transform associated with chemometric method based on Partial Least Squares regression (PLS - Partial Least Squares). To prepare a work solution antimicrobials, the five analytes of interest were used in increasing doses, namely tetracycline from 0 to 0.60 ppm, sulfamethazine 0 to 0.12 ppm, sulfadimethoxine 0 to 2.40 ppm chloramphenicol 0 1.20 ppm and ampicillin 0 to 1.80 ppm to perform the work with the interest in multiresidues analysis. The performance of the models constructed was evaluated through the figures of merit: mean square error of calibration and cross-validation, correlation coefficients and offset performance ratio. For the purposes of applicability in this work, it is considered that the models generated for Tetracycline, Sulfadimethoxine and Chloramphenicol were considered viable, with the greatest predictive power and efficiency, then were employed to evaluate the quality of raw milk from the region of Pato Branco . Among the analyzed samples by NIR, 70% were in conformity with sanitary legislation, and 5% of these samples had concentrations below the Maximum Residue permitted, and is also satisfactory. However 30% of the sample set showed unsatisfactory results when evaluating the contamination with antimicrobials residues, which is non conformity related to the presence of antimicrobial unauthorized use or concentrations above the permitted limits. With the development of this work can be said that laboratory tests in the food area, using infrared spectroscopy with multivariate calibration was also good, fast in analysis, reduced costs and with minimum generation of laboratory waste. Thus, the alternative method proposed meets the quality concerns and desired efficiency by industrial sectors and society in general.

Validação de metodologia analítica por CLAE-DAD para determinação de compostos fenólicos e atividade biológica em coprodutos agroindustriais

The southern region of Brazil, especially the states of Parana and Santa Catarina stand out for growing grapes and apples for fresh consumption and in order to add value to these products, process the material for the production of wine, juices and jellies . As a result large quantities of by-products, such as peels, seeds and pulp are produced becoming environmental problems. Studies reuse of these by-products have attracted interest because they have shown a high biological potential, due to the presence of high levels of phenolic compounds, which are associated with a lower incidence of disease caused by oxidative stress, due to its antioxidant, antiinflammatory and antibacterial properties. Currently, few studies are presented on the phenolic composition and biological potential of waste grape variety Bordô (Vitis labrusca) and apple (Malus domestica) Gala variety, cultivated in southern Brazil. Within this context, the objectives of this study were: compare the efficiency of solidliquid and liquid-liquid extraction, perform the optimization and validation of analytical methodology by HPLC-DAD for the separation, identification and quantification of multiclass phenolic compounds, evaluate the activity antioxidant by sequestering methods of free radical 2,2-diphenyl-1 picrilhidrazina (DPPH) and 2,2-azino-bis (3- ethyl-benzthiazoline-6-sulphonic acid) (ABTS) solution, reduction of Fe3+ in Fe2+ method (FRAP), ORAC, RP-HPLC-ABTS online, Rancimat and determination of total phenolics three agro-industrial byproducts, pomace and stems grape Bordô produced in Paraná Southwest region and Gala apple pomace coming from the Santa Catarina West. Optimization and validation of chromatographic method showed satisfactory quality parameters for the compounds of interest and the solidliquid extraction was more efficient in extracting phenolic evaluated. The three byproducts evaluated showed significant levels of phenolic compounds when analyzed by HPLC, especially flavonoids, catechin and epicatechin besides that showed significant antioxidant capacity. The grape stems extract had the highest sequestration capacity of DPPH and ABTS radical and reduced iron, and high content of phenolic compounds. The apple pomace extract showed the best response to the Rancimat method, which indicates a high potential to protect the oil from lipid oxidation, was no significant difference when compared to synthetic antioxidant TBHQ. The results of this study showed that the agro-industrial coproducts analyzed are rich in phenolic compounds of high antioxidant capacity and therefore must be better explored by the food and pharmaceutical industries.

Simulação numérica do escoamento monofásico em uma bomba centrífuga radial

Centrifugal pumps are vastly used in many industrial applications. Knowledge of how these components behave in several circumstances is crucial for the development of more efficient and, therefore, less expensive pumping installations. The combination of multiple impellers, vaned diffusers and a volute might introduce several complex flow characteristics that largely deviate from regular inviscid pump flow theory. Computational Fluid Dynamics can be very helpful to extract information about which physical phenomena are involved in such flows. In this sense, this work performs a numerical study of the flow in a two-stage centrifugal pump (Imbil ITAP 65-330/2) with a vaned diffuser and a volute. The flow in the pump is modeled using the software Ansys CFX, by means of a multi-block, transient rotor-stator technique, with structured grids for all pump parts. The simulations were performed using water and a mixture of water and glycerin as work fluids. Several viscosities were considered, in a range between 87 and 720 cP. Comparisons between experimental data obtained by Amaral (2007) and numerical head curves showed a good agreement, with an average deviation of 6.8% for water. The behavior of velocity, pressure and turbulence kinetic energy fields was evaluated for several operational conditions. In general, the results obtained by this work achieved the proposed goals and are a significant contribution to the understanding of the flow studied.

Adsorção de corantes têxteis aniônicos e catiônicos em resíduos do processamento de fios de algodão modificados quimicamente

The textile industry generates a large volume of high organic effluent loading whoseintense color arises from residual dyes. Due to the environmental implications caused by this category of contaminant there is a permanent search for methods to remove these compounds from industrial waste waters. The adsorption alternative is one of the most efficient ways for such a purpose of sequestering/remediation and the use of inexpensive materials such as agricultural residues (e.g., sugarcane bagasse) and cotton dust waste (CDW) from weaving in their natural or chemically modified forms. The inclusion of quaternary amino groups (DEAE+) and methylcarboxylic (CM-) in the CDW cellulosic structure generates an ion exchange capacity in these formerly inert matrix and, consequently, consolidates its ability for electrovalent adsorption of residual textile dyes. The obtained ionic matrices were evaluated for pHpcz, the retention efficiency for various textile dyes in different experimental conditions, such as initial concentration , temperature, contact time in order to determine the kinetic and thermodynamic parameters of adsorption in batch, turning comprehensive how does occur the process, then understood from the respective isotherms. It was observed a change in the pHpcz for CM--CDW (6.07) and DEAE+-CDW (9.66) as compared to the native CDW (6.46), confirming changes in the total surface charge. The ionized matrices were effective for removing all evaluated pure or residual textile dyes under various tested experimental conditions. The kinetics of the adsorption process data had best fitted to the model a pseudosecond order and an intraparticle diffusion model suggested that the process takes place in more than one step. The time required for the system to reach equilibrium varied according to the initial concentration of dye, being faster in diluted solutions. The isotherm model of Langmuir was the best fit to the experimental data. The maximum adsorption capacity varied differently for each tested dye and it is closely related to the interaction adsorbent/adsorbate and dye chemical structure. Few dyes obtained a linear variation of the balance ka constant due to the inversion of temperature and might have influence form their thermodynamic behavior. Dyes that could be evaluated such as BR 18: 1 and AzL, showed features of an endothermic adsorption process (ΔH° positive) and the dye VmL presented exothermic process characteristics (ΔH° negative). ΔG° values suggested that adsorption occurred spontaneously, except for the BY 28 dye, and the values of ΔH° indicated that adsorption occurred by a chemisorption process. The reduction of 31 to 51% in the biodegradability of the matrix after the dye adsorption means that they must go through a cleaning process before being discarded or recycled, and the regeneration test indicates that matrices can be reused up to five times without loss of performance. The DEAE+-CDW matrix was efficient for the removal of color from a real textile effluent reaching an UV-Visible spectral area decrease of 93% when applied in a proportion of 15 g ion exchanger matrix L-1 of colored wastewater, even in the case of the parallel presence of 50 g L-1 of mordant salts in the waste water. The wide range of colored matter removal by the synthesized matrices varied from 40.27 to 98.65 mg g-1 of ionized matrix, obviously depending in each particular chemical structure of the dye upon adsorption.

Uma nova abordagem do método Level Set baseada em conhecimento a e priori da forma

The analysis of fluid behavior in multiphase flow is very relevant to guarantee system safety. The use of equipment to describe such behavior is subjected to factors such as the high level of investments and of specialized labor. The application of image processing techniques to flow analysis can be a good alternative, however, very little research has been developed. In this subject, this study aims at developing a new approach to image segmentation based on Level Set method that connects the active contours and prior knowledge. In order to do that, a model shape of the targeted object is trained and defined through a model of point distribution and later this model is inserted as one of the extension velocity functions for the curve evolution at zero level of level set method. The proposed approach creates a framework that consists in three terms of energy and an extension velocity function λLg(θ)+vAg(θ)+muP(0)+θf. The first three terms of the equation are the same ones introduced in (LI CHENYANG XU; FOX, 2005) and the last part of the equation θf is based on the representation of object shape proposed in this work. Two method variations are used: one restricted (Restrict Level Set - RLS) and the other with no restriction (Free Level Set - FLS). The first one is used in image segmentation that contains targets with little variation in shape and pose. The second will be used to correctly identify the shape of the bubbles in the liquid gas two phase flows. The efficiency and robustness of the approach RLS and FLS are presented in the images of the liquid gas two phase flows and in the image dataset HTZ (FERRARI et al., 2009). The results confirm the good performance of the proposed algorithm (RLS and FLS) and indicate that the approach may be used as an efficient method to validate and/or calibrate the various existing equipment used as meters for two phase flow properties, as well as in other image segmentation problems.

Sistema de gestão em segurança e saúde do trabalho (SGSST) integrando a norma OHSAS 18001 e NR-18: proposta para o setor da construção civil

The job security issue is crucial for the development of construction due to the need to ensure the health of workers, which is done by means of laws and production management. Thus, among various other laws, was enacted NR-18, in order to ensure the worker's minimum conditions for the development work. Despite legislative developments on the subject, they have become ineffective against the excessive number of accidents in the construction industry, bringing the company to greater in ensuring the health and safety of its workers. In view of this need for improvement of working environment in a general appearance, both for purposes of ensuring the law obedience as comfort for workers and quality of the organization, the System Health Management and Safety (OHSMS) is a valid tool demonstrates the evolution of business management, as well as OHSAS 18001 which proposes to ensure the efficiency and integration of a system geared to safety and health at work by means of implements and adaptations of it, in order to bring significant improvements to conditions of work, especially in the form of a new culture to be adopted by the company. Addressing the problem, this paper aims to develop a management system by OHSAS 18001 which is consistent with the terms of NR-18 as it is this integration of OHSMS Management System of the company as a usual practice of that aims at an improvement of work safety in the business of Buildings.

Relações interorganizacionais e eficiência coletiva: um estudo de caso no arranjo produtivo local de confecções do Agreste de Pernambuco

This work is a study in the Local Productive Arrangement of confections from Agreste of Pernambuco, as a relevant sector in economic and social aspect. This research has as central aim to understand how the inter-organizational relations influence the collective efficiency of arrangement. The theoretical framework employed highlights the approaches that deal with the benefits of business agglomeration for the develop­ment of firms and regions. It has discussed the approach of small and medium enter­ prises and industrial districts (SCHMITZ, 1997), which introduce the concept of col­ lective efficiency, explaining that only those externalities explained by Marshall (1996) are not sufficient to explain the competitive advantage of enterprises, expand­ing the idea that organizations achieve competitive advantage not acting alone. To examine the influences of relations in the collective efficiency, it has been taken as analytical perspective theory of social networks (GRANOVETTER, 1973, 1985; BURT, 1992; UZZI, 1997) because it has believe that this approach provides subsi­ dies for a structural analysis of social relationships in face the behavior of human ac­tion. By examining the organizations in a social network, you should understand the reason of this establishment of the relationship, their benefits, and as the information flow takes place and density of links between the actors (Powell; SMITH-DOERR, 1994). As for the methods, this study is characterized as a case study, in according to the purposed objectives, in addition to qualitative method. Also, due to recovering of the historical milestones of the arrangement, it is used a sectional approach with longitudinal perspective (VIEIRA, 2004). The primary and secondary data were used in order to understand the evolutionary process of the sector and their inter-actors re­ lationships in the arrangement for the promotion of development, for both, was used the contend and documentary analysis technique, respectively (DELLAGNELO ; SIL­VA, 2005). The approach of social networks has permitted understand that social re­lationships may extend the collective efficiency of the arrangement, and therefore need to develop policies that encourage the legalization of informal companies in ar­rangement, by showing up themselves representative. Thus, the relations estab­ lished in LPA of confections from Agreste of Pernambuco need for more effective mechanisms to broaden the collective efficiency. Therefore, this way as take place has directly benefited only a group of companies that are linked in some way the sup­portive institutions. So we can conclude that the inter-actor relations have limited the collective efficiency of LPA, being stimulated by the institutions in support only to groups of entrepreneurs, even those that produce external relations for all clustered companies

Responsabilidade social: visões e perspectivas de empresários do segmento industrial do Rio Grande do Norte

The theme Corporate Social Responsibility is relatively recent both in the academic field and in the business practice. Because of the lack of socialization of experiences and precision of concepts, there are gaps regarding the understanding of the subject and, also, how to conduct operations. This study just seeks to investigate such matter, focusing applications of social responsibility in business. It takes, as empirical field, winners of the PSQT - SESI Prize of Quality at Work in Rio Grande do Norte (2002-2007) in order to systematize the various approaches on the issue, aiming to reveal subjective visions and perspectives of the theme. It is characterized as a qualitative study, carried out by structured interview. The universe was composed by 15 companies. It was used analysis of content categorical as an axis for the interpretation of the information. Three approaches guided the analysis: Business Ethics, (normative); Business & Society (contractual); Social Issues Management (strategic). The findings are related in three ways: 1) reasons for the CSR practice; 2) the results obtained; 3) the means of CSR. It was found that the award participation occurs, mostly, linked to SESI invitations, so, as an articulated movement of industrial corporations in Brazil it occurs, also, because of the organizational commitment with the society and the possibility of internal and social growths and because of the importance attributed to the report as an instrument of consultancy. There are no indicators to check impacts of organizational interventions, in spite of the existence of planning for the actions. Social responsibility appears as a tool to reinforce the organizational image and to increase satisfaction of the employees. There is a tendency of large and medium firms to a contractual commitment while the small and the micros firms are on strategic or normative level. The analysis of the perspectives of social responsibility future revealed trends towards for strategic approach

Análise metagenômica da microbiota de ambientes aquáticos do estado do Rio Grande do Norte - Brasil

The screening for genes in metagenomic libraries from soil creates opportunities to explore the enormous genetic and metabolic diversity of microorganisms. Rivers are ecosystems with high biological diversity, but few were examined using the metagenomic approach. With this objective, a metagenomic library was constructed from DNA soil samples collected at three different points along the Jundiaí-river (Rio Grande do Norte-Brazil). The points sampled are from open area, rough terrain and with the direct incidence of sunlight. This library was analyzed functionally and based in sequence. For functional analysis Luria-Bertani solid medium (LB) with NaCl concentration varied from 0.17M to 0.85M was used for functional analysis. Positives clones resistant to hypersaline medium were obtained. The recombinant DNAs were extracted and transformed into Escherichia coli strain DH10B and survival curves were obtained for quantification of abiotic stress resistance. The sequences of clones were obtained and submitted to the BLASTX tool. Some clones were found to hypothetical proteins of microorganisms from both Archaea and Bacteria division. One of the clones showed a complete ORF with high similarity to glucose-6-phosphate isomerase which participates in the synthesis of glycerol pathway and serves as a compatible solute to balance the osmotic pressure inside and outside of cells. Subsequently, in order to identify genes encoding osmolytes or enzymes related halotolerance, environmental DNA samples from the river soil, from the water column of the estuary and ocean were collected and pyrosequenced. Sequences of osmolytes and enzymes of different microorganisms were obtained from the UniProt and used as RefSeqs for homology identification (TBLASTN) in metagenomic databases. The sequences were submitted to HMMER for the functional domains identification. Some enzymes were identified: alpha-trehalose-phosphate synthase, L-ectoina synthase (EctC), transaminase L-2 ,4-diaminobutyric acid (EctB), L-2 ,4-diaminobutyric acetyltransferase (EctA), L-threonine 3 dehydrogenase (sorbitol pathway), glycerol-3-phosphate dehydrogenase, inositol 3-phosphate dehydrogenase, chaperones, L-proline, glycine betaine binding ABC transporter, myo-inositol-1-phosphate synthase protein of proline simportadora / PutP sodium-and trehalose-6-phosphate phosphatase These proteins are commonly related to saline environments, however the identification of them in river environment is justified by the high salt concentration in the soil during prolonged dry seasons this river. Regarding the richness of the microbiota the river substrate has an abundance of halobacteria similar to the sea and more than the estuary. These data confirm the existence of a specialized response against salt stress by microorganisms in the environment of the Jundiaí river

Avaliação da eficiência dos programas de pós-graduação acadêmicos em Administração, Contabilidade e Turismo

The Triennial Evaluation of Coordination for the Improvement of Higher Education Personnel (CAPES) is made according to several indicators, divided into several issues and items, and their weights. In these it is evident the importance of scientific periodicals. This study aims to evaluate the relative efficiency of post-graduate students in Business Administration, Accounting and tourism evaluated by CAPES in Brazil. The methodology used the data envelopment analysis - DEA (Data Envelopment Analysis). The data were obtained from the site and organized by the CAPES Qualis score. The analysis was performed by the DEA variable returns to scale, product-oriented (BCC-O), with data from the three-year periods 2004-2006 and 2007-2009. Among the main results are the average increase significantly the relative efficiency of the programs in the period 2007-2009 compared to 2004-2006 period, the highest average efficiency of programs linked to public institutions in relation to private, doctoral programs with the present average efficiency sharply higher than those only with masters, and senior programs in general were more efficient. There is also moderate and significant correlation between the efficiency scores and concepts CAPES. The Malmquist index analysis showed that more than 85% of programs had increased productivity. It is noteworthy that the main effect that influences the increase of the Malmquist index is the displacement of the border (Frontier-shift)

Trajetórias da agroecologia no Brasil: entre movimentos sociais, redes científicas e políticas públicas.

No Brasil, o movimento social de defesa de uma agricultura ecológica e socialmente justa, teve inicio nos anos 70, com forte oposição a agricultura industrial. Avançou com o fortalecimento da sociedade civil e finalmente, ocorreu à institucionalização. Na fase atual, ocorre um quarto momento, constituído pela redefinição e recomposição de diferentes versões da agricultura alternativa, no qual a agroecologia ocupa um lugar significativo. Portanto, é esse processo de recomposição das agriculturas ecológicas no país, que objetivamos retraçar, descrevendo as características e determinantes. A metodologia resulta de uma revisão bibliográfica, análise e interpretação sociológica de uma dezena de entrevistas abertas.Concluímos que estas diferenças no posicionamento podem ser amplamente relacionadas com concepções e escolas teóricas que têm influenciado os investigadores e agentes envolvidos, num contexto onde as redes científicas dedicadas a questões da agroecologia são muito heterogêneas.

Determinação de mercúrio total no material particulado atmosférico do Distrito Federal, Brasil

Dissertação (mestrado)—Universidade de Brasília, Instituto de Química, Programa de Pós-Graduação em Tecnologia Química e Biológica, 2016.