Loss of 3-chlorotyrosine by inflammatory oxidants: Implications for the use of 3-chlorotyrosine as a bio-marker in vivo

Activated neutrophils generate the potent oxidant hypochlorous acid (HOCl) from the enzyme myeloperoxidase (MPO). A proposed bio-marker for MPO-derived HOCl in vivo is 3-chlorotyrosine, elevated levels of which have been measured in several human inflammatory pathologies. However, it is unlikely that HOCl is produced as the sole oxidant at sites of chronic inflammation as other reactive species are also produced during the inflammatory response. The work presented shows that free and protein bound 3-chlorotyrosine is lost upon addition of the pro-inflammatory oxidants, HOCl, peroxynitrite, and acidified nitrite. Furthermore, incubation of 3-chlorotyrosine with activated RAW264.7 macrophages or neutrophil-like HL-60 cells resulted in significant loss of 3-chlorotyrosine. Therefore, at sites of chronic inflammation where there is concomitant ONOO- and HOCl formation, it is possible measurement of 3-chlorotyrosine may represent an underestimate of the true extent of tyrosine chlorination. This finding could account for some of the discrepancies reported between 3-chlorotyrosine levels in tissues in the literature. (c) 2008 Elsevier Inc. All rights reserved.

Does gym use impact upon nutritional knowledge?

Purpose - The purpose of this paper is to investigate gym and non-gym users' use and understanding of nutrition labels. Design/methodology/approach - A consumer survey in the form of a questionnaire conducted in the Greater London area in February/March 2005. Subject recruitment process took place in both a gym and university setting. Frequency tables and chi(2)-test are used to assess relationships between variables (p = 0.05). Findings - The resulting sample consisted of 187 subjects, with predominance of females and gym users. Of the subjects, 88 per cent reported to at least occasionally read nutrition labels, with higher reading rates amongst women, irrespective of gym user status. Total and saturated fats are the most often information viewed on labels, however the overall knowledge of the calorie content of fat is low, with 53 per cent of subjects responding saturated fat contains more calories per gram when compared with other types of fats. This paper does not find significant differences in the use and understanding of nutrition labels between gym and non-gym users, but highlights the publics' continued lack of understanding of nutrition labels. Originality/value - This paper is unique as it investigates whether there is any difference between gym/non-gym users' use and interpretation of use of nutrition labels. It finds gender impacted more on nutritional labels knowledge than gym user's status. This points to a gender issue and questions the quality of information available to the general public. This paper is valuable as it highlights and identifies an area that requires further research and assessment, and is therefore useful to key stakeholders responsible for public health nutrition.

The use of colloidal gas aphrons as novel downstream processing for the recovery of astaxanthin from cells of Phaffia rhodozyma

BACKGROUND: There is an increasing interest in obtaining natural products with bioactive properties, using fermentation technology. However, the downstream processing consisting of multiple steps can be complicated, leading to increase in the final cost of the product. Therefore there is a need for integrated, cost-effective and scalable separation processes. RESULTS: The present study investigates the use of colloidal gas aphrons (CGA), which are surfactant-stabilized microbubbles, as a novel method for downstream processing. More particularly, their application for the recovery of astaxanthin from the cells of Phaffia rhodozyma is explored. Research carried out with standard solutions of astaxanthin and CGA generated from the cationic surfactant hexadecyl. trimethyl ammonium bromide (CTAB) showed that up to 90% recovery can be achieved under optimum conditions, i.e., pH 11 with NaOH 0.2 mol L-1. In the case of the cells' suspension from the fermentation broth, three different approaches were investigated: (a) the conventional integrated approach where CGA were applied directly; (b) CGA were applied to the clarified suspension of cells; and finally (c) the in situ approach, where CGA are generated within the clarified suspension of cells. Interestingly, in the case of the whole suspension (approach a) highest recoveries (78%) were achieved under the same conditions found to be optimal for the standard solutions. In addition, up to 97% recovery of total carotenoids could be achieved from the clarified suspension after pretreatment with NaOH. This pretreatment led to maximum cell disruption as well as optimum conditioning for subsequent CGA separation. CONCLUSIONS: These results demonstrate the potential of CGA for the recovery of bioactive components from complex feedstock. (c) 2008 Society of Chemical Industry.

Improved fluorescent proteins for single-molecule research in molecular tracking and co-localization

Three promising variants of autofluorescent proteins have been analyzed photophysically for their proposed use in single-molecule microscopy studies in living cells to compare their superiority to other fluorescent proteins previously reported regarding the number of photons emitted. The first variant under investigation the F46L mutant of eYFP has a 10% greater photon emission rate and > 50% slower photobleaching rate on average than the standard eYFP fluorophore. The monomeric red fluorescent protein (mRFP) has a fivefold lower photon emission rate, likely due to the monomeric content, and also a tenfold faster photobleaching rate than the DsRed fluorescent protein. In contrast, the previously reported eqfp611 has a 50% lower emission rate yet photobleaches more than a factor 2 slowly. We conclude that the F46L YFP and the eqfp611 are superior new options for single molecule imaging and tracking studies in living cells. Studies were also performed on the effects of forced quenching of multiple fluorescent proteins in sub-micrometer regions that would show the effects of dimerization at low concentration levels of fluorescent proteins and also indicate corrections to stoichiometry patterns with fluorescent proteins previously in print. We also introduce properties at the single molecule level of new FRET pairs with combinations of fluorescent proteins and artificial fluorophores.

Risky attitudes towards road use in pre-drivers

Motor vehicle accidents are one of the principal causes of adolescent disability or mortality and male drivers are more likely to be involved in road accidents than female drivers. In part such associations between driver age and sex have been linked to differences in risky behaviour (e.g. speed, violations) and individual characteristics (e.g. sensation seeking, deviant behaviour). The aim of this research is to determine whether associations between risky road user behaviour and individual characteristics are a function of driver behaviour or whether they are intrinsic and measurable in individuals too young to drive. Five hundred and sixty-seven pre-driver students aged 11-16 from three secondary schools completed questionnaires measuring enthusiasm for speed, sensation seeking, deviant behaviour and attitudes towards driver violations. Boys reported more risky attitudes than girls for all measures. Associations between sensation seeking, deviant behaviour and attitudes towards risky road use were present from early adolescence and were strongest around age 14, before individuals learn to drive. Risky attitudes towards road use are associated with individual characteristics and are observed in adolescents long before they learn to drive. Safe attitudes towards road use and driver behaviour should be promoted from childhood in order to be effective. (C) 2007 Elsevier Ltd. All rights reserved.

Patients' understanding of risk associated with medication use: impact of European Commission guidelines and other risk scales

Patients want and need comprehensive and accurate information about their medicines so that they can participate in decisions about their healthcare: In particular, they require information about the likely risks and benefits that are associated with the different treatment options. However, to provide this information in a form that people can readily understand and use is a considerable challenge to healthcare professionals. One recent attempt to standardise the Language of risk has been to produce sets of verbal descriptors that correspond to specific probability ranges, such as those outlined in the European Commission (EC) Pharmaceutical Committee guidelines in 1998 for describing the incidence of adverse effects. This paper provides an overview of a number of studies involving members of the general public, patients, and hospital doctors, that evaluated the utility of the EC guideline descriptors (very common, common, uncommon, rare, very rare). In all studies it was found that people significantly over-estimated the likelihood of adverse effects occurring, given specific verbal descriptors. This in turn resulted in significantly higher ratings of their perceived risks to health and significantly lower ratings of their likelihood of taking the medicine. Such problems of interpretation are not restricted to the EC guideline descriptors. Similar levels of misinterpretation have also been demonstrated with two other recently advocated risk scales (Caiman's verbal descriptor scale and Barclay, Costigan and Davies' lottery scale). In conclusion, the challenge for risk communicators and for future research will be to produce a language of risk that is sufficiently flexible to take into account different perspectives, as well as changing circumstances and contexts of illness and its treatments. In the meantime, we urge the EC and other legislative bodies to stop recommending the use of specific verbal labels or phrases until there is a stronger evidence base to support their use.

VERA: virtual environment for research in archaeology

The VERA (Virtual Environment for Research in Archaeology) project is based on a research excavation of part of the large Roman town at Silchester, which aims to trace the site's development from its origins before the Roman conquest to its abandonment in the fifth century A.D. [1]. The VERA project aims to investigate how archaeologists use Information Technology (IT) in the context of a field excavation, and also for post-excavation analysis. VERA is a two-year project funded by the JISC VRE 2 programme that involves researchers from the University of Reading, University College London, and York Archaeological Trust. The overall aim of the project is to assess and introduce new tools and technologies that can aid the archaeological processes of gathering, recording and later analysis of data on the finds and artefacts discovered. The researchers involved in the project have a mix of skills, ranging from those related to archaeology, and computer science, though to ones involving usability and user assessment. This paper reports on the status of the research and development work undertaken in the project so far; this includes addressing various programming hurdles, on-site experiments and experiences, and the outcomes of usability and assessment studies.

iTrench: a study of user reactions to the use of information technology in field archaeology

This article describes work undertaken by the VERA project to investigate how archaeologists work with information technology (IT) on excavation sites. We used a diary study to research the usual patterns of behaviour of archaeologists digging the Silchester Roman town site during the summer of 2007. Although recording had previously been undertaken using pen and paper, during the 2007 season a part of the dig was dedicated to trials of IT and archaeologists used digital pens and paper and Nokia N800 handheld PDAs to record their work. The goal of the trial was to see whether it was possible to record data from the dig whilst still on site, rather than waiting until after the excavation to enter it into the Integrated Archaeological Database (IADB) and to determine whether the archaeologists found the new technology helpful. The digital pens were a success, however, the N800s were not successful given the extreme conditions on site. Our findings confirmed that it was important that technology should fit in well with the work being undertaken rather than being used for its own sake, and should respect established work flows. We also found that the quality of data being entered was a recurrent concern as was the reliability of the infrastructure and equipment.

Proposing a way forward: a review of standardisation in the use of age categories and ageing techniques in osteological analysis (2004 to 2009)

This study assesses the current state of adult skeletal age-at-death estimation in biological anthropology through analysis of data published in recent research articles from three major anthropological and archaeological journals (2004–2009). The most commonly used adult ageing methods, age of ‘adulthood’, age ranges and the maximum age reported for ‘mature’ adults were compared. The results showed a wide range of variability in the age at which individuals were determined to be adult (from 14 to 25 years), uneven age ranges, a lack of standardisation in the use of descriptive age categories and the inappropriate application of some ageing methods for the sample being examined. Such discrepancies make comparisons between skeletal samples difficult, while the inappropriate use of some techniques make the resultant age estimations unreliable. At a time when national and even global comparisons of past health are becoming prominent, standardisation in the terminology and age categories used to define adults within each sample is fundamental. It is hoped that this research will prompt discussions in the osteological community (both nationally and internationally) about what defines an ‘adult’, how to standardise the age ranges that we use and how individuals should be assigned to each age category. Skeletal markers have been proposed to help physically identify ‘adult’ individuals.

Actors and objects: A socio-technical networks approach for construction management research

We explore the contribution of socio-technical networks approaches to construction management research. These approaches are distinctive for their analysis of actors and objects as mutually constituted within socio-technical networks. They raise questions about the ways in which the content, meaning and use of technology is negotiated in practice, how particular technical configurations are elaborated in response to specific problems and why certain paths or solutions are adopted rather than others. We illustrate this general approach with three case studies: a historical study of the development of reinforced concrete in France, the UK and the US, the recent introduction of 3D-CAD software into four firms and an analysis of the uptake of environmental assessment technologies in the UK since 1990. In each we draw out the ways in which various technologies shaped and were shaped by different socio-technical networks. We conclude with a reflection on the contributions of socio-technical network analysis for more general issues including the study of innovation and analyses of context and power.

Predicting microbial pollution concentrations in UK rivers in response to land use change

The Water Framework Directive has caused a paradigm shift towards the integrated management of recreational water quality through the development of drainage basin-wide programmes of measures. This has increased the need for a cost-effective diagnostic tool capable of accurately predicting riverine faecal indicator organism (FIO) concentrations. This paper outlines the application of models developed to fulfil this need, which represent the first transferrable generic FIO models to be developed for the UK to incorporate direct measures of key FIO sources (namely human and livestock population data) as predictor variables. We apply a recently developed transfer methodology, which enables the quantification of geometric mean presumptive faecal coliforms and presumptive intestinal enterococci concentrations for base- and high-flow during the summer bathing season in unmonitored UK watercourses, to predict FIO concentrations in the Humber river basin district. Because the FIO models incorporate explanatory variables which allow the effects of policy measures which influence livestock stocking rates to be assessed, we carry out empirical analysis of the differential effects of seven land use management and policy instruments (fiscal constraint, production constraint, cost intervention, area intervention, demand-side constraint, input constraint, and micro-level land use management) all of which can be used to reduce riverine FIO concentrations. This research provides insights into FIO source apportionment, explores a selection of pollution remediation strategies and the spatial differentiation of land use policies which could be implemented to deliver river quality improvements. All of the policy tools we model reduce FIO concentrations in rivers but our research suggests that the installation of streamside fencing in intensive milk producing areas may be the single most effective land management strategy to reduce riverine microbial pollution.

An overview of the current status of research into adopting high levels of renewables in Ireland

This paper provides an overview of the reduction targets that Ireland has set in the context of decarbonising their electricity generation through the use of renewables. The main challenges associated with integrating high levels (>20% of installed capacity) of non-dispatchable renewable generation are identified. The rising complexity of the challenge as renewable penetration levels increase is highlighted. A list of relevant research questions is then proposed, and an overview is given into the previous work that has gone into answering some of them. In particular, studies into the Irish energy market are identified, the current knowledge gap is described, and areas of necessary future research are suggested

Final report on research project PS2010, proof of concept of automated mapping of weeds in arable fields

Many weeds occur in patches but farmers frequently spray whole fields to control the weeds in these patches. Given a geo-referenced weed map, technology exists to confine spraying to these patches. Adoption of patch spraying by arable farmers has, however, been negligible partly due to the difficulty of constructing weed maps. Building on previous DEFRA and HGCA projects, this proposal aims to develop and evaluate a machine vision system to automate the weed mapping process. The project thereby addresses the principal technical stumbling block to widespread adoption of site specific weed management (SSWM). The accuracy of weed identification by machine vision based on a single field survey may be inadequate to create herbicide application maps. We therefore propose to test the hypothesis that sufficiently accurate weed maps can be constructed by integrating information from geo-referenced images captured automatically at different times of the year during normal field activities. Accuracy of identification will also be increased by utilising a priori knowledge of weeds present in fields. To prove this concept, images will be captured from arable fields on two farms and processed offline to identify and map the weeds, focussing especially on black-grass, wild oats, barren brome, couch grass and cleavers. As advocated by Lutman et al. (2002), the approach uncouples the weed mapping and treatment processes and builds on the observation that patches of these weeds are quite stable in arable fields. There are three main aspects to the project. 1) Machine vision hardware. Hardware component parts of the system are one or more cameras connected to a single board computer (Concurrent Solutions LLC) and interfaced with an accurate Global Positioning System (GPS) supplied by Patchwork Technology. The camera(s) will take separate measurements for each of the three primary colours of visible light (red, green and blue) in each pixel. The basic proof of concept can be achieved in principle using a single camera system, but in practice systems with more than one camera may need to be installed so that larger fractions of each field can be photographed. Hardware will be reviewed regularly during the project in response to feedback from other work packages and updated as required. 2) Image capture and weed identification software. The machine vision system will be attached to toolbars of farm machinery so that images can be collected during different field operations. Images will be captured at different ground speeds, in different directions and at different crop growth stages as well as in different crop backgrounds. Having captured geo-referenced images in the field, image analysis software will be developed to identify weed species by Murray State and Reading Universities with advice from The Arable Group. A wide range of pattern recognition and in particular Bayesian Networks will be used to advance the state of the art in machine vision-based weed identification and mapping. Weed identification algorithms used by others are inadequate for this project as we intend to collect and correlate images collected at different growth stages. Plants grown for this purpose by Herbiseed will be used in the first instance. In addition, our image capture and analysis system will include plant characteristics such as leaf shape, size, vein structure, colour and textural pattern, some of which are not detectable by other machine vision systems or are omitted by their algorithms. Using such a list of features observable using our machine vision system, we will determine those that can be used to distinguish weed species of interest. 3) Weed mapping. Geo-referenced maps of weeds in arable fields (Reading University and Syngenta) will be produced with advice from The Arable Group and Patchwork Technology. Natural infestations will be mapped in the fields but we will also introduce specimen plants in pots to facilitate more rigorous system evaluation and testing. Manual weed maps of the same fields will be generated by Reading University, Syngenta and Peter Lutman so that the accuracy of automated mapping can be assessed. The principal hypothesis and concept to be tested is that by combining maps from several surveys, a weed map with acceptable accuracy for endusers can be produced. If the concept is proved and can be commercialised, systems could be retrofitted at low cost onto existing farm machinery. The outputs of the weed mapping software would then link with the precision farming options already built into many commercial sprayers, allowing their use for targeted, site-specific herbicide applications. Immediate economic benefits would, therefore, arise directly from reducing herbicide costs. SSWM will also reduce the overall pesticide load on the crop and so may reduce pesticide residues in food and drinking water, and reduce adverse impacts of pesticides on non-target species and beneficials. Farmers may even choose to leave unsprayed some non-injurious, environmentally-beneficial, low density weed infestations. These benefits fit very well with the anticipated legislation emerging in the new EU Thematic Strategy for Pesticides which will encourage more targeted use of pesticides and greater uptake of Integrated Crop (Pest) Management approaches, and also with the requirements of the Water Framework Directive to reduce levels of pesticides in water bodies. The greater precision of weed management offered by SSWM is therefore a key element in preparing arable farming systems for the future, where policy makers and consumers want to minimise pesticide use and the carbon footprint of farming while maintaining food production and security. The mapping technology could also be used on organic farms to identify areas of fields needing mechanical weed control thereby reducing both carbon footprints and also damage to crops by, for example, spring tines. Objective i. To develop a prototype machine vision system for automated image capture during agricultural field operations; ii. To prove the concept that images captured by the machine vision system over a series of field operations can be processed to identify and geo-reference specific weeds in the field; iii. To generate weed maps from the geo-referenced, weed plants/patches identified in objective (ii).