Construção de um ambiente virtual de aprendizagem para aplicação do processo de enfermagem baseado na Nanda International, NOC, NIC e CIPE®

This study aimed to build a virtual learning environment for application of the nursing process based on the NANDA-I, NOC, NIC and ICNP® . Faced with problems related to learning of the nursing process and classifications, there is an urgent need to develop innovative teaching resources that modify the relationship between students and teachers. The methodology was based on the steps inception, development, construction and transition, and the software development process Rational Process Unifield. The team involved in the development of this environment was composed by researchers and students of The Care and Epidemiological Practice in Health and Nursing and Group of the Software Engineering curse of the Federal University Rio Grande do Norte, with the participation of the Lisbon and Porto Schools of Nursing, in Portugal. In the inception stage the inter research communication was in order to define the functions, features and tools for the construction process. In the preparation, step the planning and modeling occurred, which resulted in the creation of a diagram and a architectural drawings that specify the features and functionality of the software. The development, unit testing and integrated in interfaces of the modules and areas (administrator, teacher, student, and construction of the NP). Then the transition step was performed, which showed complete and functioning system, as well as the training and use by researchers with its use in practice. In conclusion, this study allowed for the planning and the construction of an educational technology, and it is expected that its implementation will trigger a substantial change in the learning of the nursing process and classifications, with the student being active agent of the learning process. Later, an assessment will be made of functional performance, which will enable the software development, with a feedback, correction of defects and necessary changes. It is believed that the software increment after the reviews, this tool grow further and help insert this methodology and every language under the educational and health institutions, promoting paradigmatic desired change by nursing.

Regulador eletromagnético de frequência aplicado no controle de velocidade de geradores eólicos

The constant necessity for new sources of renewable energy is increasingly promoting the increase of investments in this area. Among other sources, the wind power has been becoming prominent. It is important to promote the search for the improvement of the technologies involved in the topologies of the wind turbines, seeking for alternatives which enhance the gotten performance, despite the irregularity of the wind speed. This study presents a new system for speed control, in this case applied to the wind turbines - the Electromagnetic Frequency Regulator (EFR). One of the most used devices in some topologies is the mechanical gearboxes which, along with a short service life, often represent sources of noise and defects. The EFR does not need these transmission boxes, representing a technological advancement, using for that an adapted induction machine, in which the stator becomes mobile, supportive to the axis of the turbine. In the topology used in this study, the EFR also allows us to leave out the usage of the eletronic converters to establish the coupling between the generator and the electrical grid. It also the reason why it provides the possibility of obtaining the generation in alternating current, with constant voltage and frequency, where there is no electrical grid. Responsable for the mechanical speed control of the generator, the EFR can be useful in other transmission systems in which the mechanical speed control output is the objective. In addition, the EFR operates through the combination of two inputs, a mechanical and other electrical. It multiplies the possibilities of application because it is able to synergistic coupling between different arrays of energy, and, for such reasons, it enables the various sources of energy involved to be uncoupled from the network, being the synchronous generator responsible for the system connection with the electrical grid, simplifying the control strategies on the power injected in it. Experimental and simulation results are presented through this study, about a wind turbine, validating the proposal related to the efficience in the speed control of the system for different wind conditions.

Metodologia de estimação de estados para tratamento de medições errôneas e registros não sincronizados em algoritmos de localização de faltas em linhas de transmissão

The performance of algorithms for fault location i n transmission lines is directly related to the accuracy of its input data. Thus, fa ctors such as errors in the line parameters, failures in synchronization of oscillographic recor ds and errors in measurements of voltage and current can significantly influence the accurac y of algorithms that use bad data to indicate the fault location. This work presents a new method ology for fault location in transmission lines based on the theory of state estimation in or der to determine the location of faults more accurately by considering realistic systematic erro rs that may be present in measurements of voltage and current. The methodology was implemente d in two stages: pre-fault and post- fault. In the first step, assuming non-synchronized data, the synchronization angle and positive sequence line parameters are estimated, an d in the second, the fault distance is estimated. Besides calculating the most likely faul t distance obtained from measurement errors, the variance associated with the distance f ound is also determined, using the errors theory. This is one of the main contributions of th is work, since, with the proposed algorithm, it is possible to determine a most likely zone of f ault incidence, with approximately 95,45% of confidence. Tests for evaluation and validation of the proposed algorithm were realized from actual records of faults and from simulations of fictitious transmission systems using ATP software. The obtained results are relevant to show that the proposed estimation approach works even adopting realistic variances, c ompatible with real equipments errors.

Otimização de parâmetros mecânicos e microestruturais dos moldes em areia de sílica ligados quimicamente pelo processo de cura a frio em fundição de aço

Surface defects on steel parts borne costs of smelting industries due to the need of rework. Sand molds are frequently used in foundry industries and largely responsible for providing surface defects. This study aims to optimize the levels of the molding process variables to minimize the occurrence of surface defects in steel castings in silica sand molds chemically linked by cold cure process. The methodology used the experimental design with split plot, being considered in the study the resin percentage factors in the mold formulation, addition of iron oxide, type of paint, the paint application method, amount of ink layers, use of hot air along the lines and waiting time of the mold before casting. They were analyzed as response variables erosion defects, sand inclusion, penetration, porosity and surface finish. Tensile strength tests were performed to evaluate the influence of factors on mechanical parameters and the microstructural parameters were carried out the analysis of X-ray diffraction, scanning electron microscopy (SEM) and thermal analysis (TG / DSC / dilatometry). The results elucidate that for the faulty erosion, the only significant factor with a 95% confidence level was the type of ink and the ink alumina-based superior results obtained. For the sand inclusion of defect, there were three significant factors, with best results obtained with alumina-based paint and spray applied using hot air in the mold before casting the metal. For the defect penetration, there were four significant factors, the best results being achieved with 0.8% of resin and addition of iron oxide in the molding formulation, the paint being applied by brush and standby time of 24 hours before leak. For the defect porosity with a 95% confidence level, no significant factors. For the defect surface finish, the best results were achieved with the 0.8% formulation of the resin in the mold and application of the paint brush. To obtain the levels of the factors that optimize all defects simultaneously, we performed a weighted average of the results of each type of fault, concluding that the best levels of the factors were: 0.8% resin and addition of iron oxide in the formulation of the template, application of two coats of paint applied with a brush or spray, using hot air in the mold before casting and 24 hours of waiting ready the mold before casting. These levels of the optimized factors were used in an experiment to confirm that ratified the results, helping to reduce rework and consequently reducing costs of cast steel parts.

Avaliação do planejamento de prótese parcial removível em modelos recebidos por laboratórios de João Pessoa-PB

Objective: To evaluate the planning and quality of plaster models for fabricati on of removable parti al dentures received from three commercial prosthodonti c laboratories located in the city of João Pessoa, PB, Brazil, which perform the casting procedures in their facilities. Methods: Forty 40 plaster models were photographed per laboratory, totalizing 120 models. The evaluation was performed using two questi onnaires, one designed for the dental prosthesis technicians, and another applied by the investigator for the visual evaluati on of the models. Data were analyzed using the SPSS soft ware version 13.0. Results: Ninety-two (76.7%) models did not present planning. In addition, no model presented references of insertion plane or guide pins. Calculati on of the mouth preparati on index (MPI) to evaluate the distribution of the oclusal and cingulum abutments or rests showed that 86 (71.7%) models were classifi ed as poor, 23 (19.2%) models as good and only 11 (9,.2%) models as acceptable. Defects were found in 102 (85%) models. Conclusion: The prosthodontists are not preparing the mouth of their pati ents, neglecti ng the planning of removable partial dentures, and passing this responsibility to the dental prosthesis technicians. In addition, the quality of the models sent to the laboratories was unsatisfactory.

Avaliação do planejamento de prótese parcial removível em modelos recebidos por laboratórios de João Pessoa-PB

Objective: To evaluate the planning and quality of plaster models for fabricati on of removable parti al dentures received from three commercial prosthodonti c laboratories located in the city of João Pessoa, PB, Brazil, which perform the casting procedures in their facilities. Methods: Forty 40 plaster models were photographed per laboratory, totalizing 120 models. The evaluation was performed using two questi onnaires, one designed for the dental prosthesis technicians, and another applied by the investigator for the visual evaluati on of the models. Data were analyzed using the SPSS soft ware version 13.0. Results: Ninety-two (76.7%) models did not present planning. In addition, no model presented references of insertion plane or guide pins. Calculati on of the mouth preparati on index (MPI) to evaluate the distribution of the oclusal and cingulum abutments or rests showed that 86 (71.7%) models were classifi ed as poor, 23 (19.2%) models as good and only 11 (9,.2%) models as acceptable. Defects were found in 102 (85%) models. Conclusion: The prosthodontists are not preparing the mouth of their pati ents, neglecti ng the planning of removable partial dentures, and passing this responsibility to the dental prosthesis technicians. In addition, the quality of the models sent to the laboratories was unsatisfactory.

Receptores de citocinas proinflamatórias na pré-eclâmpsia

Preeclampsia is a disease specific of human pregnancy that affects 3-8% of pregnant women, and it is one of the three leading causes of maternal mortality and morbidity. The disease is characterized by hypertension and proteinuria after the 20th week of gestation. The risk factors for this disease are not completely understood but appear to include dysregulation of the immune response arising from defects in placentation, environmental and genetic factors. This study aimed to determine whether the variation in the amount of proinflammatory cytokine receptors IL-1R2, IL-6R and TNF-αR1 would be involved in preeclampsia. They were recruited women with preeclampsia (n=24) and women who evolved during pregnancy without changes in blood pressure (n=12) were recruited. Clinical and laboratory data were collected. The cytokine receptors (IL-1R2, TNF-αR1 and IL-6R) were assessed in mononuclear cells isolated from peripheral blood using flow cytometry (Control = 8; PE = 24). C-reactive protein (CRP) was determined by CRP ultrasensitive method (Control = 7; PE = 18) was performed using sera pregnant women. Women with preeclampsia had higher weight at the beginning of the pregnancy (p=0.0171) and lower gestational age at delivery (0.0008). Classical monocytes were decreased in preeclampsia but not intermediate or non-classical monocytes. The frequency of IL-1R2 pro inflammatory cytokine receptors is decreased in women with PE only in the subpopulation of non-classical monocytes (p = 0.0011). TNF-αR1 receptor and IL-6R, had a decreased frequency in the three subpopulations of monocyte (classic, intermediate and non-classical) when compared to women with normal pregnancy. An increase in IL-1R2 receptor in TCD4+ lymphocytes, but a decrease in TNF-receptor and IL-6R in women with preeclampsia were found. No differences in the frequency of those receptors in CD3+/CD8+ in preeclampsia. There was no difference in C-reactive protein in preeclampsia. The reduction in the amount of IL-1R2, TNF- αR1 and IL-6R monocytes and lymphocytes can be involved in the regulation of inflammation observed in preeclampsia, contributing to disease.

Análise de falhas em rolamentos por análise de vibração aplicado a aerogeradores

With the heavy use of bearings in various segments of the industry, there are a large number of necessary interruptions in industrial processes to perform maintenance on these devices, with the case study wind turbines. The growth of the wind energy sector, encouraged to conduct research that helps to solve this problem. To contribute to predictive maintenance has been carried out a signal analysis using techniques which allow detection and location of the problem in order to prevent accidents caused and losses due to unexpected equipment failures, whereas low system rotation complicates the detection of the failure. To work around this problem, there was the indication of standard signals for defects in the bearings, making diagnosis of possible failures. With this diagnosis can be performed predictive maintenance, identifying the failure of the system that were tested, such as the introduction of grains of sand in the bearing, wear on the outer race of the bearing and bearing rust. By processing signals it is possible to construct graphs developing a mapping of defects by different peaks in the frequency band.

Efeito da oxigenação hiperbárica no reparo ósseo de ratos diabéticos

The chronic state of hyperglycemia due to diabetes mellitus affects multiples organs impairing life quality. In bone, diabetes alters strength and mineral density and also suppresses the osteoblast activity, leading to an unbalanced bone healing process. Hyperbaric oxygen therapy (HBO) is suggested as an adjuvant treatment to accelerate bone repair. This study evaluated the effects of HBO in the number of mast cells and in new bone formation at the initial stage of bone repair in normoglycemic and diabetic rats. It was hypothesized that HBO treatment may improve bone repair in diabetic bone. The rats were equally divided in four groups: Control (C); Control + HBO (CH); Diabetes (D) and Diabetes + HBO (DH). Diabetes was induced by streptozotocin (65mg/kg) and femoral bone defects were created thirty days after diabetes induction in all groups. HBO initiated immediately after surgery procedure and was performed daily, for 7 days, in the CH e DH groups. Seven days after surgery, all animals were euthanized. The femur diaphyses were removed, fixated, decalcified and processed for paraffin embedding. The semi-serial histological sections obtained were stained with Hematoxylin-Eosin (HE), Mallory Trichrome and Toluidine Blue. The qualitative analysis was conducted in the histology slides stained with HE, where it was evaluated the morphological aspects of bone repair in the lesion area, observing the presence of clot, inflammatory cells, granulation tissue, type of bone tissue, morphology of bone cells, and thickness and organization of bone trabeculae. In the slides stained with Mallory Trichrome and Toluidine Blue were evaluated the percentage of new bone formation and number of mast cells, respectively. The qualitative analysis showed that the CH group presented a more advanced stage of bone repair compared to the C group, showing thicker trabeculae and greater bone filling of the lesion area. In D and DH group, the lesion area was partially filled with new bone formation tissue and presented thinner trabeculae and fewer areas associated to osteoclasts compared to control group. The histomorphometric analysis showed a significant improvement in new bone formation (p<0.001) comparing CH (38.08 ± 4.05) and C (32.05 ± 5.51); C and D (24.62 ± 2.28 and CH and DH (27.14 ± 4.21) groups. In the normoglycemic rats there was a significant increasing in the number of mast cells (p<0.05) comparing C (8.06 ± 5.15) and CH (21.06 ± 4.91) groups. In conclusion, this study showed that diabetes impaired bone repair and HBO was only able to increase new bone formation and the number of mast cells in the normoglycemic animals.

Fatores pré-abate que influenciam na qualidade da carne de frangos griller

The consumption of a product is directly linked to its quality, and are required to comply with quality standard regulations. In chicken "griller" which comes from industrial strains, selected for best growth performance, shot with up to 35 days old and weighing 1,400kg, they have not been reported in the literature a number of quality aspects This study aimed determine the muscle transformation time in the flesh in chickens "griller" incidence of meat defects, "PSE" (pale, soft and exdudative) and "DFD" (dark, firm and dry) and their correlation between different window times slaughter (total time between beginning of the fasting and the time of slaughter) and pH curve, four different times post mortem. The base data for the study was composed of information of 208 chickens, collected between August and September 2014, in a slaughterhouse slaughtering chickens in the middle region of Triangulo Mineiro and Alto Paranaíba. We used the Minitab 17.1.0 program for the development of descriptive statistical analysis and Pareto charts. The Pearson correlation was used to evaluate the linear relationship between two variables and Excel 2013, Microsoft Office®, to produce tables and graphs. The analysis consisted of 11 chickens cities and the distance to the poultry slaughterhouse ranged from 24.5 km to 123 km. It was observed that the pH curve decays gradually until time 5horas after slaughter, and its increase was 24, indicating the transformation of the muscle meat. The incidence of regular meat was 39.9%, "DFD" 30.3% and "PSE" 29.8%. For "DFD" meat, it was observed that factors: low ambient temperature, longer transportation and fast window and mileage at dirt road, contributed to its occurrence (p <0.05). For "PSE" meat, it was observed that lower body weight factors, longer transport favored frequency (p <0.05) of the meat defect. There was no significant correlation in variance analysis between distance, waiting time at rest shed and humidity related to meat defects (p> 0.05). This high incidence of defects meat may be due to pre-slaughter stress factors.

Utilização de dispositivos de armazenamento de energia em apoio ao funcionamento de redes isoladas

Temos assistido nos últimos anos à proliferação da produção distribuída de electricidade, sobretudo, com recurso a fontes de energia renováveis, implicando a natural reestruturação das redes eléctricas existentes, desde a produção até ao consumidor final. As constantes preocupações na garantia da qualidade de serviço e até mesmo em termos ambientais, levam a que a operacionalidade das redes seja cada vez mais eficiente, visando a integração de tecnologias emergentes como é o caso dos sistemas de armazenamento de energia. A aposta nas energias de origem renovável nomeadamente a solar e a eólica, representa uma forma cada vez mais presente de geração de electricidade, tendo como grande inconveniente o regime de intermitência a que estão sujeitas, não se conseguindo tirar proveitos absolutos de todas as potencialidades que estas fontes proporcionam. Existem actualmente sistemas de armazenamento de energia que permitem optimizar o comportamento das redes. Nesta dissertação é feita uma abordagem a alguns desses sistemas, tendo como objectivo principal a demonstração das potencialidades de optimização dos sistemas de produção e distribuição de energia eléctrica com recurso a sistemas de armazenamento de energia, em redes isoladas e interligadas. É também feito um estudo do comportamento dinâmico de uma rede com vários cenários de ocorrência de defeitos, com e sem armazenamento de energia. Para isso a base deste trabalho consistiu na familiarização com uma ferramenta de grande potencial na simulação dinâmica de redes eléctricas, utilizado por prestigiados grupos de energia a nível mundial, na qual foi implementada a rede de teste e efectuadas as simulações do estudo.

Aplicação da metodologia Advanced Product Quality Planning no desenvolvimento de um novo produto no setor automóvel

Este projeto surgiu com a necessidade da constituição de uma equipa multidisciplinar, incluindo uma pessoa responsável pela qualidade no desenvolvimento de um novo produto da fábrica. O produto é a estrutura metálica de um encosto de trás de um automóvel. Para o desenvolvimento do produto foi usado o método Advanced Product Quality Planning, vastamente utilizado no setor automóvel. Com o intuito de melhor perceber os problemas que podem surgir no novo produto foi estudado um produto fabricado no local de estágio e outro produzido numa outra fábrica do mesmo grupo, que têm algumas semelhanças a nível de processo e de design, respetivamente. Foram utilizadas algumas ferramentas da qualidade para explorar os problemas existentes na fábrica a nível do produto já existente e comprovado se algumas ações de melhoria propostas foram, ou não, bem-sucedidas. Com os outputs retirados da análise dos defeitos internos e externos foi elaborado o Plano de Controlo, que inclui a listagem de controlos necessários para se conseguir prever a qualidade do novo produto.

Materiais à base de Sr(Ti,Nb)O3 para sensores lambda

Os sensores lambda resistivos possuem as vantagens de simplicidade e menor custo relativamente à utilização generalizada de sensores potenciométricos de oxigénio. Nesse sentido, os titanatos de estrôncio têm sido alvo de diversos estudos. Para a produção de uma relação inequívoca entre a condutividade destes materiais e a pressão parcial de oxigénio é necessária a adição de um dopante dador que suprime a condução eletrónica do tipo-p na região de pressões parciais de oxigénio próximas de ar. Contudo, a adição de um dopante dador produz respostas lentas destes materiais quando densos a variações da pressão parcial de oxigénio. Além da preparação usual dos pós por reação do estado sólido, foram preparadas diversas composições por mecanossíntese. Tal relaciona-se com o fato exaustivamente reportado de as amostras destes materiais, especialmente quando dopados com dadores, apresentarem comportamentos dependentes das condições de processamento. Teve ainda o intuito de avaliar a viabilidade da sua preparação por este método, e consequentemente verificar se este método de preparação, que presumivelmente produzirá pós com composição mais homogénea e mais reativos, permite alterar/manipular a resposta obtida por amostras com eles produzidas. Foram preparados diversos filmes, tipologia muito usada na produção de sensores resistivos, e amostras porosas com diversas composições à base de titanato de estrôncio produzidos com variadas condições de processamento. Foram realizadas diversas caracterizações sobre estes espécimes numa tentativa de melhor compreender as propriedades destes materiais e a dependência destas com parâmetros microestruturais como o tamanho de grão e a porosidade. Foi verificado que os exemplares de titanato de estrôncio não dopado, quer em filmes quer em amostras porosas, apresentam um comportamento elétrico semelhante ao apresentado por amostras densas deste material. Apurou-se ainda, que as suas características apresentam uma variação ténue com a alteração das condições de processamento. Já espécimes de titanato de estrôncio dopados com dador revelam uma forte dependência das suas propriedades com as condições de processamento utilizadas, nomeadamente, a temperatura de sinterização e o tempo de permanência a essa temperatura. Para o fabrico de sensores resistivos de oxigénio poderá ser preferível o recurso a amostras porosas pelo facto de mais facilmente se manipularem as suas características microestruturais e devido à exclusão dos problemas associados à interação entre o substrato de alumina e o filme. As composições não dopadas são as indicadas para esta função se a gama de pressões de oxigénio a avaliar for relativamente pouco extensa sendo aconselhadas as composições dopadas com dador se for pretendida uma medição da pressão parcial de oxigénio em zonas mais extensas correspondentes à queima com deficiência ou excesso de oxigénio. Mesmo em amostras de elevada porosidade poderá ocorrer resposta transiente do material dopado com dador.

Anomalias dentárias em crianças com fissura palatina ou labial

As anomalias dentárias podem ocorrer como resultado de fatores genéticos e ambientais. Estas são geralmente causadas por defeitos em genes específicos, no entanto, eventos pré e pós-natais têm também sido implicados em diferentes tipos de anomalias dentárias. Quando comparados com a população geral, os indivíduos que apresentam fenda labial (FL) e fenda palatina (FP) demonstraram ter uma maior prevalência de anomalias dentárias, tais como variações de número, posição e tamanho, que na sua maioria se localizavam na área do defeito da fenda. Com este trabalho, pretendeu-se então, realizar uma revisão narrativa sobre as várias anomalias dentárias que podem estar associadas a FL ou FP, a sua prevalência e as opções terapêuticas recomendadas. Durante os meses de Dezembro de 2012 e Janeiro de 2013 foi realizada uma pesquisa bibliográfica na base de dados Pubmed atendendo às seguintes palavras chave “dental anomalies” AND “cleft lip and palate”; “oral health” AND “cleft lip and palate”. Na pesquisa empregaram-se os seguintes limites, artigos publicados nos últimos cinco anos, estudos em humanos, abstract disponível e artigos disponíveis em português, inglês e espanhol. Nesta pesquisa obteve-se um total de 50 artigos. Os artigos encontrados foram seleccionados primeiramente pelo título, seguidamente pela leitura cuidadosa dos abstracts e, finalmente, do artigo por inteiro, daí resultando um total de 17 artigos. Para o melhor entendimento do tema a ser desenvolvido, foram ainda considerados artigos de referência publicados em anos anteriores e livros de Odontopediatria e Genética Orofacial. As crianças com FL ou FP apresentam maior prevalência de anomalias dentárias de forma, número, posição, erupção e estrutura dentária, com localização privilegiada na área do defeito da fenda. Os pacientes portadores desta malformação congénita necessitam de intervenção precoce e acompanhamento continuado ao longo de toda a infância e adolescência, por uma equipa multidisciplinar que deverá incluir o pediatra, cirurgião maxilofacial, médico dentista, terapeuta da fala, psicólogo e cirurgião plástico.