Shallow and deep deformation in northern Apennines region using seismological data

For its particular position and the complex geological history, the Northern Apennines has been considered as a natural laboratory to apply several kinds of investigations. By the way, it is complicated to joint all the knowledge about the Northern Apennines in a unique picture that explains the structural and geological emplacement that produced it. The main goal of this thesis is to put together all information on the deformation - in the crust and at depth - of this region and to describe a geodynamical model that takes account of it. To do so, we have analyzed the pattern of deformation in the crust and in the mantle. In both cases the deformation has been studied using always information recovered from earthquakes, although using different techniques. In particular the shallower deformation has been studied using seismic moment tensors information. For our purpose we used the methods described in Arvidsson and Ekstrom (1998) that allowing the use in the inversion of surface waves [and not only of the body waves as the Centroid Moment Tensor (Dziewonski et al., 1981) one] allow to determine seismic source parameters for earthquakes with magnitude as small as 4.0. We applied this tool in the Northern Apennines and through this activity we have built up the Italian CMT dataset (Pondrelli et al., 2006) and the pattern of seismic deformation using the Kostrov (1974) method on a regular grid of 0.25 degree cells. We obtained a map of lateral variations of the pattern of seismic deformation on different layers of depth, taking into account the fact that shallow earthquakes (within 15 km of depth) in the region occur everywhere while most of events with a deeper hypocenter (15-40 km) occur only in the outer part of the belt, on the Adriatic side. For the analysis of the deep deformation, i.e. that occurred in the mantle, we used the anisotropy information characterizing the structure below the Northern Apennines. The anisotropy is an earth properties that in the crust is due to the presence of aligned fluid filled cracks or alternating isotropic layers with different elastic properties while in the mantle the most important cause of seismic anisotropy is the lattice preferred orientation (LPO) of the mantle minerals as the olivine. This last is a highly anisotropic mineral and tends to align its fast crystallographic axes (a-axis) parallel to the astenospheric flow as a response to finite strain induced by geodynamic processes. The seismic anisotropy pattern of a region is measured utilizing the shear wave splitting phenomenon (that is the seismological analogue to optical birefringence). Here, to do so, we apply on teleseismic earthquakes recorded on stations located in the study region, the Sileny and Plomerova (1996) approach. The results are analyzed on the basis of their lateral and vertical variations to better define the earth structure beneath Northern Apennines. We find different anisotropic domains, a Tuscany and an Adria one, with a pattern of seismic anisotropy which laterally varies in a similar way respect to the seismic deformation. Moreover, beneath the Adriatic region the distribution of the splitting parameters is so complex to request an appropriate analysis. Therefore we applied on our data the code of Menke and Levin (2003) which allows to look for different models of structures with multilayer anisotropy. We obtained that the structure beneath the Po Plain is probably even more complicated than expected. On the basis of the results obtained for this thesis, added with those from previous works, we suggest that slab roll-back, which created the Apennines and opened the Tyrrhenian Sea, evolved in the north boundary of Northern Apennines in a different way from its southern part. In particular, the trench retreat developed primarily south of our study region, with an eastward roll-back. In the northern portion of the orogen, after a first stage during which the retreat was perpendicular to the trench, it became oblique with respect to the structure.

L'Ottica di Euclide e la scienza della visione

La presente tesi concerne il trattato "Ottica" scritto da Euclide nel III secolo a.C. quando, nell'area del bacino del Mediterraneo, si verificò una rivoluzione scientifica che diede origine alla nascita della scienza moderna. Si colloca nel filone delle ricerche volte a ricostruire la verità storica ed il contenuto scientifico del pensiero dello scienziato ed a meglio illustrare i contributi dati, dalla scienza ellenistica, alla conoscenza del fenomeno visivo. Si sono presi in esame dunque il momento storico e la situazione economica, sociale e scientifica verificatasi nel III secolo a.C., in particolare ad Alessandria d'Egitto, dove l'incontro del pensiero greco con le culture preesistenti portò alla nascita del metodo scientifico moderno; si sono considerati il pensiero filosofico del tempo e le teorie scientifiche sviluppatesi, con particolare riguardo alla matematica ed alla scienza medica, fondata dal medico alessandrino Erofilo. Si è poi preso in esame il contenuto del trattato. L' "Ottica" è il primo trattato di ottica geometrica della storia e la prima teoria scientifica che si occupi della visione. È basato sul metodo ipotetico-deduttivo, su conoscenze di oftalmologia e sulla scienza matematica degli Elementi. È un modello geometrico di un processo fisiologico e riconferma la matematica quale strumento principe per la costruzione del sapere scientifico. Crea modelli utili per altre teorie scientifiche (ad es. l'astronomia) e per le arti figurative ed ha applicazioni tecnologiche (ad es. l'astrolabio e la diottra). È il testo di base della moderna ottica geometrica. Non si pone come una verità assoluta ma come un'ipotesi di lavoro. Si sono esaminati il difficile percorso storico e bibliografico dell'opera caratterizzato da incomprensioni e manomissioni nonché la ricerca filologica volta a ricostruire l'integrità del testo. Si ritenne infatti che la sua validità fosse inficiata da alcuni "errori", in realtà dovuti all'incomprensione dei concetti e del metodo euclidei ed alle successive manomissioni. Emerge come la scienza non abbia avuto un progresso costante, continuo, aprioristico e come sia incerta ed instabile la conservazione nel tempo del sapere scientifico. Appare inoltre evidente come la scienza sia un prodotto della cultura umana e pertanto come la conoscenza della storia sia una condizione fondante per il progresso scientifico.

L'anello di coomologia della varietà delle bandiere

Lo scopo di questa tesi è il calcolo dell'anello di coomologia di de Rham della varietà delle bandiere di uno spazio vettoriale complesso. Per prima cosa introduciamo la coomologia di de Rham e riassumiamo le sue principali proprietà. Definiamo poi la varietà delle bandiere di uno spazio vettoriale complesso, e, utilizzando la teoria delle classi di Chern, ne calcoliamo l'anello di coomologia di de Rham.

Le determinanti del ricorso al debito delle piccole e medie imprese italiane: un'analisi empirica

L’analisi condotta nella tesi mira ad indagare le determinanti del debito delle piccole e medie imprese italiane: la domanda di ricerca è indirizzata a capire se la struttura finanziaria di queste ultime segue i modelli teorici sviluppati nell’ambito della letteratura di Corporate Finance o se, d’altro canto, non sia possibile prescindere dalle peculiarità delle piccole e medie imprese per spiegare il ricorso alle diverse fonti di finanziamento. La ricerca empirica effettuata nella dissertazione vuole essere un tentativo di coniugare le teorie di riferimento e le evidenze empiriche relative alle piccole e medie imprese italiane, analizzandone il comportamento attraverso lo studio del campione di dati fornito da Capitalia, relativo alla Nona Indagine per il periodo 2001-2003. Il campione in oggetto fa riferimento a circa 4000 imprese con più di 10 addetti, prevalentemente del settore manifatturiero. Per indagare le determinanti del debito nelle sue componenti più tradizionali, si sono prese in considerazione il debito commerciale e il debito bancario a breve termine come forme di finanziamento correnti mentre, tra le forme di finanziamento di medio-lungo periodo, le variabili usate sono state il ricorso al debito bancario a lungo termine e a strumenti obbligazionari. Inoltre, si è ricorso anche a misure più tradizionali di leva finanziaria, quali il rapporto di indebitamento, la proporzione tra debiti bancari, sia di breve che di lungo periodo, e l’ammontare dei finanziamenti esterni rispetto al valore dell’impresa, distinguendo anche qui, tra finanziamenti a breve e a lungo termine. L’analisi descrittiva ha mostrato il massiccio ricorso al debito bancario e, in generale, alle forme di indebitamento a breve. Le imprese di dimensioni minori, più giovani e opache tendono a ricorrere alle fonti interne e a forme di indebitamento a breve, mentre le imprese maggiormente dimensionate mostrano una struttura del debito più articolata. Questo ha suggerito la definizione di una diversa misura di debito, che tiene conto della complessità della sua struttura all’interno delle imprese, in base ad un ricorso di tipo gerarchico alle fonti di finanziamento: il grado di complessità dipende dalle tipologie e dalla quantità dei contratti di debito conclusi dall’impresa . E’ plausibile pensare che le imprese ricorrano prima alle fonti interne di finanziamento, perché prive di costi, e poi all’indebitamento nei confronti di diversi stakeholders: rispetto alla prossimità e alla facilità dell’ottenimento del finanziamento, è sembrato naturale pensare che un’impresa ricorra dapprima al debito commerciale, poi al debito bancario e solo infine all’emissione di obbligazioni, in un ordine gerarchico. Ne consegue che se un’impresa (non) ha contratto debiti con fornitori, banche e mercato, la complessità della struttura del suo debito è massima (nulla). L’analisi econometrica successiva è stata indirizzata in tre direzioni. In primis, l’analisi longitudinale dei dati è stata volta ad evidenziare se la struttura finanziaria delle PMI risponde ad un particolare modello teorico, in accordo con le teoria tradizionali di riferimento. In secondo luogo, l’analisi delle determinanti si è allargata allo studio degli aspetti peculiari delle imprese medio-piccole. Infine, si è indagato se, nell’ambito delle imprese di dimensioni minori, si osservano comportamenti omogenei oppure se determinate scelte nelle fonti di finanziamento sono da ricondurre all’esistenza di alcuni vincoli. Quindi, partendo dalla rassegna dei principali riferimenti nella letteratura, costituiti dalla Trade-off theory (Modigliani e Miller, 1963, De Angelo e Masulis, 1980, Miller, 1977), dalla Pecking order theory (Myers 1984, Myers e Majluf, 1984) e dalla Financial growth cycle theory (Berger e Udell, 1998), una prima serie di analisi econometriche è stata rivolta alla verifica empirica delle teorie suddette. Una seconda analisi mira, invece, a capire se il comportamento delle imprese possa essere spiegato anche da altri fattori: il modello del ciclo di vita dell’impresa, mutuato dalle discipline manageriali, così come il contesto italiano e la particolarità del rapporto bancaimpresa, hanno suggerito l’analisi di altre determinanti al ricorso delle diverse fonti di debito. Di conseguenza, si sono usate delle opportune analisi econometriche per evidenziare se la struttura proprietaria e di controllo dell’impresa, il suo livello di complessità organizzativa possano incidere sulla struttura del debito delle imprese. Poi, si è indagato se il massiccio ricorso al debito bancario è spiegato dalle peculiarità del rapporto banca-impresa nel nostro Paese, rintracciabili nei fenomeni tipici del relationship lending e del multiaffidamento. Ancora, si sono verificati i possibili effetti di tale rapporto sulla complessità della struttura del debito delle imprese. Infine, l’analisi della letteratura recente sulla capital structure delle imprese, l’approccio sviluppato da Fazzari Hubbard e Petersen (1988) e Almeida e Campello (2006 , 2007) ha suggerito un ultimo livello di analisi. La presenza di vincoli nelle decisioni di finanziamento, legati essenzialmente alla profittabilità, alla dimensione delle imprese, alle sue opportunità di crescita, e alla reputazione verso l’esterno, secondo la letteratura recente, è cruciale nell’analisi delle differenze sistematiche di comportamento delle imprese. Per di più, all’interno del lavoro di tesi, così come in Almeida e Campello (2007), si è ipotizzato che la propensione agli investimenti possa essere considerata un fattore endogeno rispetto alla struttura del debito delle imprese, non esogeno come la letteratura tradizionale vuole. Per questo motivo, si è proceduto ad un ultimo tipo di analisi econometrica, volta a rilevare possibili differenze significative nel comportamento delle imprese rispetto al ricorso alle fonti di finanziamento a titolo di debito: nel caso in cui esse presentino una dimensione contenuta, una bassa redditività e una scarsa reputazione all’esterno infatti, vi dovrebbe essere un effetto di complementarietà tra fonti interne ed esterne. L’effetto sarebbe tale per cui non sussisterebbe, o per lo meno non sarebbe significativa, una relazione negativa tra fonti interne ed esterne. Complessivamente, i risultati delle analisi empiriche condotte, supportano sia le teorie classiche di riferimento nell’ambito della disciplina della Corporate finance, sia la teoria proposta da Berger e Udell (1998): le variabili che risultano significative nella spiegazione della struttura del debito sono principalmente quelle relative alla dimensione, all’età, al livello e alla qualità delle informazioni disponibili. Inoltre, il ricorso a fonti interne risulta essere la primaria fonte di finanziamento, seguita dal debito. Il ricorso a fonti esterne, in particolare al debito bancario, aumenta quanto più l’impresa cresce, ha una struttura solida e la capacità di fornire delle garanzie, e ha una reputazione forte. La struttura del debito, peraltro, diventa più complessa all’aumentare della dimensione, dell’età e del livello di informazioni disponibili. L’analisi della struttura proprietaria e della componente organizzativa all’interno delle imprese ha evidenziato principalmente che la struttura del debito aumenta di complessità con maggiore probabilità se la proprietà è diffusa, se vi è un management indipendente e se la piramide organizzativa è ben definita. Relativamente al rapporto banca-impresa, i principali risultati mostrano che l’indebitamento bancario sembra essere favorito dai fenomeni di relationship lending e dal multiaffidamento. Tali peculiarità assumono tratti diversi a seconda della fase del ciclo di vita delle imprese della Nona Indagine. Infine, per quanto attiene all’ultima tipologia di analisi condotta, le evidenze empiriche suggeriscono che le piccole e medie imprese possano essere soggette a delle restrizioni che si riflettono nell’ambito delle loro politiche di investimento. Tali vincoli, relativi alla dimensione, ai profitti conseguiti e alla reputazione all’esterno, aiutano a spiegare le scelte di finanziamento delle PMI del campione.

Metodi molecolari nello studio della variabilità genetica di Tuber borchii

Tuber borchii (Ascomycota, order Pezizales) is highly valued truffle sold in local markets in Italy. Despite its economic importance, knowledge on its distribution and population variation is scarce. The objective of this work was to investigate the evolutionary forces shaping the genetic structure of this fungus using coalescent and phylogenetic methods to reconstruct the evolutionary history of populations in Italy. To assess population structure, 61 specimens were collected from 11 different Provinces of Italy. Sampling was stratified across hosts and habitats to maximize coverage in native oak and pine stands and both mychorrizae and fruiting bodies were collected. Samples were identified considering anatomo-morphological characters. DNA was extracted and both multilocus (AFLP) and single-locus (18 loci from rDNA, nDNA, and mtDNA) approaches were used to look for polymorphisms. Screening AFLP profiles, both Jaccard and Dice coefficients of similarity were utilized to transform binary matrix into a distance matrix and then to desume Neighbour-Joining trees. Though these are only preliminary examinations, phylogenetic trees were totally concordant with those deriving from single locus analyses. Phylogenetic analyses of the nuclear loci were performed using maximum likelihood with PAUP and a combined phylogenetic inference, using Bayesian estimation with all nuclear gene regions, was carried out. To reconstruct the evolutionary history, we estimated recurrent migration, migration across the history of the sample, and estimated the mutation and approximate age of mutations in each tree using SNAP Workbench. The combined phylogenetic tree using Bayesian estimation suggests that there are two main haplotypes that are difficult to be differentiated on the basis of morphology, of ecological parameters and symbiontic tree. Between these two lineages, that occur in sympatry within T. borchii populations, there is no evidence of recurrent migration. However, migration over the history of the sample was asymmetrical suggesting that isolation was a result of interrupted gene flow followed by range expansion. Low levels of divergence between the haplotypes indicate that there are likely to be two cryptic species within the T. borchii population sampled. Our results suggest that isolation between populations of T. borchii could have led to reproductive isolation between two lineages. This isolation is likely due to sympatric speciation caused by a multiple colonization from different refugia or a recent isolation. In attempting to determinate whether these haplotypes represent separate species or a partition of the same species we applied Biological and Mechanistic species Concepts. Notwithstanding, further analyses are necessary to evaluate if selection favoured premating or post-mating isolation.

Finanza Imprenditoriale: Teoria del Portafoglio e Costo del Capitale

This thesis focuses on the limits that may prevent an entrepreneur from maximizing her value, and the benefits of diversification in reducing her cost of capital. After reviewing all relevant literature dealing with the differences between traditional corporate finance and entrepreneurial finance, we focus on the biases occurring when traditional finance techniques are applied to the entrepreneurial context. In particular, using the portfolio theory framework, we determine the degree of under-diversification of entrepreneurs. Borrowing the methodology developed by Kerins et al. (2004), we test a model for the cost of capital according to the firms' industry and the entrepreneur's wealth commitment to the firm. This model takes three market inputs (standard deviation of market returns, expected return of the market, and risk-free rate), and two firm-specific inputs (standard deviation of the firm returns and correlation between firm and market returns) as parameters, and returns an appropriate cost of capital as an output. We determine the expected market return and the risk-free rate according to the huge literature on the market risk premium. As for the market return volatility, it is estimated considering a GARCH specification for the market index returns. Furthermore, we assume that the firm-specific inputs can be obtained considering new-listed firms similar in risk to the firm we are evaluating. After we form a database including all the data needed for our analysis, we perform an empirical investigation to understand how much of the firm's total risk depends on market risk, and which explanatory variables can explain it. Our results show that cost of capital declines as the level of entrepreneur's commitment decreases. Therefore, maximizing the value for the entrepreneur depends on the fraction of entrepreneur's wealth invested in the firm and the fraction she sells to outside investors. These results are interesting both for entrepreneurs and policy makers: the former can benefit from an unbiased model for their valuation; the latter can obtain some guidelines to overcome the recent financial market crisis.

La costruzione razionale della casa. Scritti e progetti di Giuseppe Pagano

The rational construction of the house. The writings and projects of Giuseppe Pagano Description, themes and research objectives The research aims at analysing the architecture of Giuseppe Pagano, which focuses on the theme of dwelling, through the reading of 3 of his house projects. On the one hand, these projects represent “minor” works not thoroughly known by Pagano’s contemporary critics; on the other they emphasise a particular methodological approach, which serves the author to explore a theme closely linked to his theoretical thought. The house project is a key to Pagano’s research, given its ties to the socio-cultural and political conditions in which the architect was working, so that it becomes a mirror of one of his specific and theoretical path, always in a state of becoming. Pagano understands architecture as a “servant of the human being”, subject to a “utilitarian slavery” since it is a clear, essential and “modest” answer to specific human needs, free from aprioristic aesthetic and formal choices. It is a rational architecture in sensu stricto; it constitutes a perfect synthesis between cause and effect and between function and form. The house needs to accommodate these principles because it is closely intertwined with human needs and intimately linked to a specific place, climatic conditions and technical and economical possibilities. Besides, differently from his public and common masterpieces such as the Palazzo Gualino, the Istituto di Fisica and the Università Commerciale Bocconi, the house projects are representative of a precise project will, which is expressed in a more authentic way, partially freed from political influences and dogmatic preoccupations and, therefore, far from the attempt to research a specific expressive language. I believe that the house project better represents that “ingenuity”, freshness and “sincerity” that Pagano identifies with the minor architecture, thereby revealing a more authentic expression of his understanding of a project. Therefore, the thesis, by tracing the theoretical research of Pagano through the analysis of some of his designed and built works, attempts to identify a specific methodological approach to Pagano’s project, which, developed through time, achieves a certain clarity in the 1930s. In fact, this methodological approach becomes more evident in his last projects, mainly regarding the house and the urban space. These reflect the attempt to respond to the new social needs and, at the same time, they also are an expression of a freer idea of built architecture, closely linked with the place and with the human being who dwells it. The three chosen projects (Villa Colli, La Casa a struttura d’acciaio and Villa Caraccio) make Pagano facing different places, different customers and different economic and technical conditions, which, given the author’s biography, correspond to important historical and political conditions. This is the reason why the projects become apparently distant works, both linguistically and conceptually, to the point that one can define them as ”eclectic”. However, I argue that this eclecticism is actually an added value to the architectural work of Pagano, steaming from the use of a method which, having as a basis the postulate of a rational architecture as essence and logic of building, finds specific variations depending on the multiple variables to be addressed by the project. This is the methodological heritage that Pagano learns from the tradition, especially that of the rural residential architecture, defined by Pagano as a “dictionary of the building logic of man”, as an “a-stylistic background”. For Pagano this traditional architecture is a clear expression of the relationships between a theme and its development, an architectural “fact” that is resolved with purely technical and utilitarian aims and with a spontaneous development far from any aprioristic theoretical principle. Architecture, therefore, cannot be an invention for Pagano and the personal contribution of each architect has to consider his/her close relationship with the specific historical context, place and new building methods. These are basic principles in the methodological approach that drives a great deal of his research and that also permits his thought to be modern. I argue that both ongoing and new collaborations with younger protagonists of the culture and architecture of the period are significant for the development of his methodology. These encounters represent the will to spread his own understanding of the “new architecture” as well as a way of self-renewal by confronting the self with new themes and realities and by learning from his collaborators. Thesis’ outline The thesis is divided in two principal parts, each articulated in four chapters attempting to offer a new reading of the theory and work of Pagano by emphasising the central themes of the research. The first chapter is an introduction to the thesis and to the theme of the rational house, as understood and developed in its typological and technical aspects by Pagano and by other protagonists of the Italian rationalism of the 1930s. Here the attention is on two different aspects defining, according to Pagano, the house project: on the one hand, the typological renewal, aimed at defining a “standard form” as a clear and essential answer to certain needs and variables of the project leading to different formal expressions. On the other, it focuses on the building, understood as a technique to “produce” architecture, where new technologies and new materials are not merely tools but also essential elements of the architectural work. In this way the villa becomes different from the theme of the common house or from that of the minimalist house, by using rules in the choice of material and in the techniques that are every time different depending on the theme under exploration and on the contingency of place. It is also visible the rigorous rationalism that distinguishes the author's appropriation of certain themes of rural architecture. The pages of “Casabella” and the events of the contemporary Triennali form the preliminary material for the writing of this chapter given that they are primary sources to individuate projects and writings produced by Pagano and contemporary architects on this theme. These writings and projects, when compared, reconstruct the evolution of the idea of the rational house and, specifically, of the personal research of Pagano. The second part regards the reading of three of Pagano’s projects of houses as a built verification of his theories. This section constitutes the central part of the thesis since it is aimed at detecting a specific methodological approach showing a theoretical and ideological evolution expressed in the vast edited literature. The three projects that have been chosen explore the theme of the house, looking at various research themes that the author proposes and that find continuity in the affirmation of a specific rationalism, focussed on concepts such as essentiality, utility, functionality and building honesty. These concepts guide the thought and the activities of Pagano, also reflecting a social and cultural period. The projects span from the theme of the villa moderna, Villa Colli, which, inspired by the architecture of North Europe, anticipates a specific rationalism of Pagano based on rigour, simplicity and essentiality, to the theme of the common house, Casa a struttura d’acciaio, la casa del domani, which ponders on the definition of new living spaces and, moreover, on new concepts of standardisation, economical efficiency and new materials responding to the changing needs of the modern society. Finally, the third project returns to the theme of the, Villa Caraccio, revisiting it with new perspectives. These perspectives find in the solution of the open plant, in the openness to nature and landscape and in the revisiting of materials and local building systems that idea of the freed house, which express clearly a new theoretical thought. Methodology It needs to be noted that due to the lack of an official Archive of Pagano’s work, the analysis of his work has been difficult and this explains the necessity to read the articles and the drawings published in the pages of «Casabella» and «Domus». As for the projects of Villa Colli and Casa a struttura d’acciaio, parts of the original drawings have been consulted. These drawings are not published and are kept in private archives of the collaborators of Pagano. The consultation of these documents has permitted the analysis of the cited works, which have been subject to a more complete reading following the different proposed solutions, which have permitted to understand the project path. The projects are analysed thought the method of comparison and critical reading which, specifically, means graphical elaborations and analytical schemes, mostly reconstructed on the basis of original projects but, where possible, also on a photographic investigation. The focus is on the project theme which, beginning with a specific living (dwelling) typology, finds variations because of the historico-political context in which Pagano is embedded and which partially shapes his research and theoretical thought, then translated in the built work. The analysis of the work follows, beginning, where possible, from a reconstruction of the evolution of the project as elaborated on the basis of the original documents and ending on an analysis of the constructive principles and composition. This second phase employs a methodology proposed by Pagano in his article Piante di ville, which, as expected, focuses on the plant as essential tool to identify the “true practical and poetic qualities of the construction”(Pagano, «Costruzioni-Casabella», 1940, p. 2). The reading of the project is integrated with the constructive analyses related to the technical aspects of the house which, in the case of Casa a struttura d’acciaio, play an important role in the project, while in Villa Colli and in Villa Caraccio are principally linked to the choice of materials for the construction of the different architectural elements. These are nonetheless key factors in the composition of the work. Future work could extend this reading to other house projects to deepen the research that could be completed with the consultation of Archival materials, which are missing at present. Finally, in the appendix I present a critical selection of the Pagano’s writings, which recall the themes discussed and embodied by the three projects. The texts have been selected among the articles published in Casabella and in other journals, completing the reading of the project work which cannot be detached from his theoretical thought. Moving from theory to project, we follow a path that brings us to define and deepen the central theme of the thesis: rational building as the principal feature of the architectural research of Pagano, which is paraphrased in multiple ways in his designed and built works.

L'impiego del modello di Rash per la valutazione della soddisfazione del paziente nell'ambito delle strutture sanitarie di ricovero

Hospitals and health service providers are use to collect data about patient’s opinion to improve patient health status and communication with them and to upgrade the management and the organization of the health service provided. A lot of survey are carry out for this purpose and several questionnaire are built to measure patient satisfaction. In particular patient satisfaction is a way to describe and assess the level of hospital service from the patient’s point of view. It is a cognitive and an emotional response to the hospital experience. Methodologically patient satisfaction is defined as a multidimensional latent variable. To assess patient satisfaction Item Response Theory has greater advantages compared to Classical Test Theory. Rasch model is a one-parameter model which belongs to Item Response Theory. Rasch model yield objective measure of the construct that are independent of the set of people interviewed and of set of items used. Rasch estimates are continuous and can be useful to “calibrate” the scale of the latent trait. This research attempt to investigate the questionnaire currently adopted to measure patient satisfaction in an Italian hospital, completed by a large sample of 3390 patients. We verify the multidimensional nature of the variable, the properties of the instrument and the level of satisfaction in the hospital. Successively we used Rasch estimates to describe the most satisfied and the less satisfied patients.

Numerical and analytical vibro-acoustic modelling of porous materials: the Cell Method for poroelasticity and the case of inclusions

Porous materials are widely used in many fields of industrial applications, to achieve the requirements of noise reduction, that nowadays derive from strict regulations. The modeling of porous materials is still a problematic issue. Numerical simulations are often problematic in case of real complex geometries, especially in terms of computational times and convergence. At the same time, analytical models, even if partly limited by restrictive simplificative hypotheses, represent a powerful instrument to capture quickly the physics of the problem and general trends. In this context, a recently developed numerical method, called the Cell Method, is described, is presented in the case of the Biot's theory and applied for representative cases. The peculiarity of the Cell Method is that it allows for a direct algebraic and geometrical discretization of the field equations, without any reduction to a weak integral form. Then, the second part of the thesis presents the case of interaction between two poroelastic materials under the context of double porosity. The idea of using periodically repeated inclusions of a second porous material into a layer composed by an original material is described. In particular, the problem is addressed considering the efficiency of the analytical method. A analytical procedure for the simulation of heterogeneous layers based is described and validated considering both conditions of absorption and transmission; a comparison with the available numerical methods is performed. ---------------- I materiali porosi sono ampiamente utilizzati per diverse applicazioni industriali, al fine di raggiungere gli obiettivi di riduzione del rumore, che sono resi impegnativi da norme al giorno d'oggi sempre più stringenti. La modellazione dei materiali porori per applicazioni vibro-acustiche rapprensenta un aspetto di una certa complessità. Le simulazioni numeriche sono spesso problematiche quando siano coinvolte geometrie di pezzi reali, in particolare riguardo i tempi computazionali e la convergenza. Allo stesso tempo, i modelli analitici, anche se parzialmente limitati a causa di ipotesi semplificative che ne restringono l'ambito di utilizzo, rappresentano uno strumento molto utile per comprendere rapidamente la fisica del problema e individuare tendenze generali. In questo contesto, un metodo numerico recentemente sviluppato, il Metodo delle Celle, viene descritto, implementato nel caso della teoria di Biot per la poroelasticità e applicato a casi rappresentativi. La peculiarità del Metodo delle Celle consiste nella discretizzazione diretta algebrica e geometrica delle equazioni di campo, senza alcuna riduzione a forme integrali deboli. Successivamente, nella seconda parte della tesi viene presentato il caso delle interazioni tra due materiali poroelastici a contatto, nel contesto dei materiali a doppia porosità. Viene descritta l'idea di utilizzare inclusioni periodicamente ripetute di un secondo materiale poroso all'interno di un layer a sua volta poroso. In particolare, il problema è studiando il metodo analitico e la sua efficienza. Una procedura analitica per il calcolo di strati eterogenei di materiale viene descritta e validata considerando sia condizioni di assorbimento, sia di trasmissione; viene effettuata una comparazione con i metodi numerici a disposizione.

Crustal heterogeneities and complexities of fault processes

In this work we study the relation between crustal heterogeneities and complexities in fault processes. The first kind of heterogeneity considered involves the concept of asperity. The presence of an asperity in the hypocentral region of the M = 6.5 earthquake of June 17-th, 2000 in the South Iceland Seismic Zone was invoked to explain the change of seismicity pattern before and after the mainshock: in particular, the spatial distribution of foreshock epicentres trends NW while the strike of the main fault is N 7◦ E and aftershocks trend accordingly; the foreshock depths were typically deeper than average aftershock depths. A model is devised which simulates the presence of an asperity in terms of a spherical inclusion, within a softer elastic medium in a transform domain with a deviatoric stress field imposed at remote distances (compressive NE − SW, tensile NW − SE). An isotropic compressive stress component is induced outside the asperity, in the direction of the compressive stress axis, and a tensile component in the direction of the tensile axis; as a consequence, fluid flow is inhibited in the compressive quadrants while it is favoured in tensile quadrants. Within the asperity the isotropic stress vanishes but the deviatoric stress increases substantially, without any significant change in the principal stress directions. Hydrofracture processes in the tensile quadrants and viscoelastic relaxation at depth may contribute to lower the effective rigidity of the medium surrounding the asperity. According to the present model, foreshocks may be interpreted as induced, close to the brittle-ductile transition, by high pressure fluids migrating upwards within the tensile quadrants; this process increases the deviatoric stress within the asperity which eventually fails, becoming the hypocenter of the mainshock, on the optimally oriented fault plane. In the second part of our work we study the complexities induced in fault processes by the layered structure of the crust. In the first model proposed we study the case in which fault bending takes place in a shallow layer. The problem can be addressed in terms of a deep vertical planar crack, interacting with a shallower inclined planar crack. An asymptotic study of the singular behaviour of the dislocation density at the interface reveals that the density distribution has an algebraic singularity at the interface of degree ω between -1 and 0, depending on the dip angle of the upper crack section and on the rigidity contrast between the two media. From the welded boundary condition at the interface between medium 1 and 2, a stress drop discontinuity condition is obtained which can be fulfilled if the stress drop in the upper medium is lower than required for a planar trough-going surface: as a corollary, a vertically dipping strike-slip fault at depth may cross the interface with a sedimentary layer, provided that the shallower section is suitably inclined (fault "refraction"); this results has important implications for our understanding of the complexity of the fault system in the SISZ; in particular, we may understand the observed offset of secondary surface fractures with respect to the strike direction of the seismic fault. The results of this model also suggest that further fractures can develop in the opposite quadrant and so a second model describing fault branching in the upper layer is proposed. As the previous model, this model can be applied only when the stress drop in the shallow layer is lower than the value prescribed for a vertical planar crack surface. Alternative solutions must be considered if the stress drop in the upper layer is higher than in the other layer, which may be the case when anelastic processes relax deviatoric stress in layer 2. In such a case one through-going crack cannot fulfil the welded boundary conditions and unwelding of the interface may take place. We have solved this problem within the theory of fracture mechanics, employing the boundary element method. The fault terminates against the interface in a T-shaped configuration, whose segments interact among each other: the lateral extent of the unwelded surface can be computed in terms of the main fault parameters and the stress field resulting in the shallower layer can be modelled. A wide stripe of high and nearly uniform shear stress develops above the unwelded surface, whose width is controlled by the lateral extension of unwelding. Secondary shear fractures may then open within this stripe, according to the Coulomb failure criterion, and the depth of open fractures opening in mixed mode may be computed and compared with the well studied fault complexities observed in the field. In absence of the T-shaped decollement structure, stress concentration above the seismic fault would be difficult to reconcile with observations, being much higher and narrower.

Una implementazione della Logica Defeasible Temporale per il ragionamento giuridico

La presente tesi descrive l’implementazione in Java di un algoritmo per il ragionamento giuridico che cattura due sue importanti peculiarità: la defeasibility del ragionamento normativo e il concetto di tempo. “Defeasible” significa “ritrattabile” e sta ad indicare, appunto, quegli schemi di ragionamento nei quali è possibile rivedere o ritrattare le conclusioni tratte precedentemente. Il tempo è essenziale per un’accurata rappresentazione degli scenari presenti nel mondo reale e in particolare per gli scenari giuridici. I profili temporali delle norme sono essenzialmente due: (i) tempo esterno della norma, cioè il periodo durante il quale la norma è valida cioè appartiene al sistema giuridico; (ii) tempo interno della norma che fa riferimento al periodo in cui la norma si applica. In particolare quest’ultimo periodo di tempo coincide con il periodo in cui le condizioni presenti nella norma devono presentarsi affinché essa produca i suoi effetti. Inoltre, nella tesi viene presentata un’estensione della logica defeasible in grado di distinguere tra regole con effetti persistenti, che valgono non solo per l’istante in cui si verificano le premesse ma anche per ogni istante successivo, e regole con effetti transitori, che valgono per un singolo istante. L’algoritmo presentato in questa tesi presenta una complessità lineare nelle dimensioni della teoria in ingresso e può interagire con le applicazioni del web semantico poiché elabora teorie scritte in Rule-ML, un linguaggio basato su XML per la rappresentazione di regole.

In nome della comunità. Analisi dei testi della sicurezza e del terrorismo

The focus of this dissertation is the relationship between the necessity for protection and the construction of cultural identities. In particular, by cultural identities I mean the representation and construction of communities: national communities, religious communities or local communities. By protection I mean the need for individuals and groups to be reassured about dangers and risks. From an anthropological point of view, the relationship between the need for protection and the formation and construction of collective identities is driven by the defensive function of culture. This was recognized explicitly by Claude Lévi-Strauss and Jurij Lotman. To explore the “protective hypothesis,” it was especially useful to compare the immunitarian paradigm, proposed by Roberto Esposito, with a semiotic approach to the problem. According to Esposito, immunity traces borders, dividing Community from what should be kept outside: the enemies, dangers and chaos, and, in general, whatever is perceived to be a threat to collective and individual life. I recognized two dimensions in the concept of immunity. The first is the logic dimension: every element of a system makes sense because of the network of differential relations in which it is inscribed; the second dimension is the social praxis of division and definition of who. We are (or what is inside the border), and who They are (or what is, and must be kept, outside the border). I tested my hypothesis by analyzing two subject areas in particular: first, the security practices in London after 9/11 and 7/7; and, second, the Spiritual Guide of 9/11 suicide bombers. In both cases, one observes the construction of two entities: We and They. The difference between the two cases is their “model of the world”: in the London case, one finds the political paradigms of security as Sovereignty, Governamentality and Biopolitics. In the Spiritual Guide, one observes a religious model of the Community of God confronting the Community of Evil. From a semiotic point view, the problem is the origin of respective values, the origin of respective moral universes, and the construction of authority. In both cases, I found that emotional dynamics are crucial in the process of forming collective identities and in the process of motivating the involved subjects: specifically, the role of fear and terror is the primary factor, and represents the principal focus of my research.

Sostanzialismo e relazionalismo dello spaziotempo alla luce della relatività generale

Until recently the debate on the ontology of spacetime had only a philosophical significance, since, from a physical point of view, General Relativity has been made "immune" to the consequences of the "Hole Argument" simply by reducing the subject to the assertion that solutions of Einstein equations which are mathematically different and related by an active diffeomorfism are physically equivalent. From a technical point of view, the natural reading of the consequences of the "Hole Argument” has always been to go further and say that the mathematical representation of spacetime in General Relativity inevitably contains a “superfluous structure” brought to light by the gauge freedom of the theory. This position of apparent split between the philosophical outcome and the physical one has been corrected thanks to a meticulous and complicated formal analysis of the theory in a fundamental and recent (2006) work by Luca Lusanna and Massimo Pauri entitled “Explaining Leibniz equivalence as difference of non-inertial appearances: dis-solution of the Hole Argument and physical individuation of point-events”. The main result of this article is that of having shown how, from a physical point of view, point-events of Einstein empty spacetime, in a particular class of models considered by them, are literally identifiable with the autonomous degrees of freedom of the gravitational field (the Dirac observables, DO). In the light of philosophical considerations based on realism assumptions of the theories and entities, the two authors then conclude by saying that spacetime point-events have a degree of "weak objectivity", since they, depending on a NIF (non-inertial frame), unlike the points of the homogeneous newtonian space, are plunged in a rich and complex non-local holistic structure provided by the “ontic part” of the metric field. Therefore according to the complex structure of spacetime that General Relativity highlights and within the declared limits of a methodology based on a Galilean scientific representation, we can certainly assert that spacetime has got "elements of reality", but the inevitably relational elements that are in the physical detection of point-events in the vacuum of matter (highlighted by the “ontic part” of the metric field, the DO) are closely dependent on the choice of the global spatiotemporal laboratory where the dynamics is expressed (NIF). According to the two authors, a peculiar kind of structuralism takes shape: the point structuralism, with common features both of the absolutist and substantival tradition and of the relationalist one. The intention of this thesis is that of proposing a method of approaching the problem that is, at least at the beginning, independent from the previous ones, that is to propose an approach based on the possibility of describing the gravitational field at three distinct levels. In other words, keeping the results achieved by the work of Lusanna and Pauri in mind and following their underlying philosophical assumptions, we intend to partially converge to their structuralist approach, but starting from what we believe is the "foundational peculiarity" of General Relativity, which is that characteristic inherent in the elements that constitute its formal structure: its essentially geometric nature as a theory considered regardless of the empirical necessity of the measure theory. Observing the theory of General Relativity from this perspective, we can find a "triple modality" for describing the gravitational field that is essentially based on a geometric interpretation of the spacetime structure. The gravitational field is now "visible" no longer in terms of its autonomous degrees of freedom (the DO), which, in fact, do not have a tensorial and, therefore, nor geometric nature, but it is analyzable through three levels: a first one, called the potential level (which the theory identifies with the components of the metric tensor), a second one, known as the connections level (which in the theory determine the forces acting on the mass and, as such, offer a level of description related to the one that the newtonian gravitation provides in terms of components of the gravitational field) and, finally, a third level, that of the Riemann tensor, which is peculiar to General Relativity only. Focusing from the beginning on what is called the "third level" seems to present immediately a first advantage: to lead directly to a description of spacetime properties in terms of gauge-invariant quantites, which allows to "short circuit" the long path that, in the treatises analyzed, leads to identify the "ontic part” of the metric field. It is then shown how to this last level it is possible to establish a “primitive level of objectivity” of spacetime in terms of the effects that matter exercises in extended domains of spacetime geometrical structure; these effects are described by invariants of the Riemann tensor, in particular of its irreducible part: the Weyl tensor. The convergence towards the affirmation by Lusanna and Pauri that the existence of a holistic, non-local and relational structure from which the properties quantitatively identified of point-events depend (in addition to their own intrinsic detection), even if it is obtained from different considerations, is realized, in our opinion, in the assignment of a crucial role to the degree of curvature of spacetime that is defined by the Weyl tensor even in the case of empty spacetimes (as in the analysis conducted by Lusanna and Pauri). In the end, matter, regarded as the physical counterpart of spacetime curvature, whose expression is the Weyl tensor, changes the value of this tensor even in spacetimes without matter. In this way, going back to the approach of Lusanna and Pauri, it affects the DOs evolution and, consequently, the physical identification of point-events (as our authors claim). In conclusion, we think that it is possible to see the holistic, relational, and non-local structure of spacetime also through the "behavior" of the Weyl tensor in terms of the Riemann tensor. This "behavior" that leads to geometrical effects of curvature is characterized from the beginning by the fact that it concerns extensive domains of the manifold (although it should be pointed out that the values of the Weyl tensor change from point to point) by virtue of the fact that the action of matter elsewhere indefinitely acts. Finally, we think that the characteristic relationality of spacetime structure should be identified in this "primitive level of organization" of spacetime.