The varied presentation of metastatic melanoma in fine needle aspiration cytology of the breast

Objective To identify cytomorphological patterns of metastatic melanoma (MM) in breast fine needle aspiration (FNA) specimens and highlight the differential diagnoses and features most useful in identifying MM. Methods The clinical, radiological and FNA findings of 16 cases were reviewed. Cytological features evaluated related to cell arrangement, size and shape of cells, nuclear and cytoplasmic features, and the presence or absence of necrosis. Results The series consisted of 14 females and two males, ranging in age from 24 to 83 years (mean = 50 years). A previous history of melanoma was available in 12/16 (75%) cases at the time of FNA reporting; however the clinical/radiological impression in 4/16 cases was of a breast cyst. The cases were classified into six morphological variants: classical (8/16), pseudopapillary (3/16), spindle-cell (1/16), melanin-rich (1/16), pleomorphic (2/16) and lymphoma-like (1/16). The varying patterns raised a wide range of differential diagnoses; however, discohesion, binucleation and granular cytoplasm were the major features seen in 94% of all cases. In 14/16 cases (88%), plasmacytoid cells, prominent nucleoli and cytoplasmic vacuolation were identified. Melanin and multinucleation were detected in 44% of cases and intranuclear cytoplasmic invaginations in 63%. Necrosis was present in more than half of the cases (56%). Conclusion MM should be considered in the differential diagnosis of breast FNA specimens when atypical cells are seen that present as plasmacytoid cells in a dispersed or pseudopapillary pattern, or as spindle, pleomorphic or pigmented cells. These features, combined with clinical history and immunocytochemistry, may assist in correctly identifying MM and directing optimal treatment.

The use of new generation geosynthetics in water treatment

The importance of clean drinking water in any community is absolutely vital if we as the consumers are to sustain a life of health and wellbeing. Suspended particles in surface waters not only provide the means to transport micro-organisms which can cause serious infections and diseases, they can also affect the performance capacity of a water treatment plant. In such situations pre-treatment ahead of the main plant is recommended. Previous research carried out using non-woven synthetic as a pre-filter materials for protecting slow sand filters from high turbidity showed that filter run times can be extended by several times and filters can be regenerated by simply removing and washing of the fabric ( Mbwette and Graham, 1987 and Mbwette, 1991). Geosynthetic materials have been extensively used for soil retention and dewatering in geotechnical applications and little research exists for the application of turbidity reduction in water treatment. With the development of new materials in geosynthetics today, it was hypothesized that the turbidity removal efficiency can be improved further by selecting appropriate materials. Two different geosynthetic materials (75 micron) tested at a filtration rate of 0.7 m/h yielded 30-45% reduction in turbidity with relatively minor head loss. It was found that the non-woven geotextile Propex 1701 retained the highest performance in both filtration efficiency and head loss across the varying turbidity ranges in comparison to other geotextiles tested. With 5 layers of the Propex 1701 an average percent reduction of approximately 67% was achieved with a head loss average of 4mm over the two and half hour testing period. Using the data collected for the Propex 1701 a mathematical model was developed for predicting the expected percent reduction given the ability to control the cost and as a result the number of layers to be used in a given filtration scenario.

Challenging the myths about flexible work in the ADF

In May 2011, the Minister for Defence requested a review into the treatment of women in the ADF following allegations of inappropriate conduct at the Australian Defence Force Academy. The Australian Human Rights Commission (AHRC) initiated the review under the leadership of the Federal Sex Discrimination Commissioner, Elizabeth Broderick, who challenged the ADF to improve its culture and build a more inclusive environment for its members. The need for flexible work arrangements (FWAs) emerged as a central issue in the review, not least as a mechanism for improving the recruitment and retention of women in the ADF. The review, and its subsequent audit report, concluded that flexibility would strengthen the ADF but that there were cultural and structural obstacles. This article addresses the uptake of formal and informal FWAs in the ADF. The study is part of an Australian Research Council funded project, led by Queensland University of Technology, which addresses how the timing, location and tasks of work are negotiated in exchanges between managers and employees.

Feeding a baby (FAB) study. Reducing childhood obesity : influencing parental infant feeding practices

Background National and international rates of obesity are escalating, and programs to modify established eating habits are having limited success. Almost one in four 2-4 year old Australian children are overweight or obese. Interventions to prevent obesity in early childhood are on the rise. However, recruitment and retention issues and outcomes to date suggests a gap in meeting participant needs. Parents need both the knowledge and skills to establish behaviours that enable children to develop healthy food preferences and eating habits early. AIM To develop intervention recommendations to reduce childhood obesity by improving the infant feeding practices of parents, focusing on the transition from a milk diet to family foods.

The educational context and services of children with additional needs in their first years of school in Australia

In Australia, children with additional needs are now primarily educated in mainstream regular classes and schools. While discussion has focused on teacher attitudes, teacher preparation and professional development to support the academic progress of children with additional needs, there is limited research examining the educational contexts and services provided to such children in Australian schools. This descriptive paper examines the educational contexts of 563 Australian children with additional needs, in reference to 3600 of their typically developing peers. Data in relation to educational setting, retention, prevalence of additional needs, access to specialist services, learning support, and individual programming are reported.

Job embeddedness and the importance of retaining small firm employees

Small firms identify retention of staff as a significant problem. Voluntary turnover of talented staff can be costly, especially in small firms where there are few slack resources. However, there is scant research on retention in small firms. We use the concept of Job Embeddedness to understand why small firm employees stay. The concept refers to the totality of forces that embed employees in their jobs and it consists of three dimensions: fit, links, and sacrifice. Seven propositions are outlined comparing the ways fit, links and sacrifice might play out for small and large firm employees. Through testing these propositions small firm owner-managers may have a better understanding of what can be done to retain employees and maintain firm performance.

Enabling a positive first year experience in higher education through social media and mobile technologies

The first year experience for students within Higher Education institutions has become increasingly important as these institutions strive to improve student retention rates. With many universities also focusing on transforming teaching and learning in an effort to attract and retain students, there is a growing demand to understand and respond to individual student requirements, such as the need to feel a sense of belonging. The literature identifies a sense of belonging as being paramount to a students satisfaction with the institution and it is within this context that this paper reports on a three year study of how first year pre-service education students use social media and mobile technologies in their personal lives and their formal education. More specifically, the study identifies trends in the use of these technologies and the growing need for students to use digital media sharing tools to connect and engage with their peers. The paper contrasts the differences in use between these groups as it seeks to identify the role these technologies can play in their teaching and learning, as well as in promoting an overall positive first year experience.

Development and application of Palygorskite porous ceramsite in a biological aerated filter (BAF)

Novel filter Palygorskite porous ceramsite (PC) was prepared using Palygorskite clay, poreforming material sawdust, and sodium silicate with a mass ratio of 10:2:1 after sintering at 700°C for 180 min. PC was characterized with X-ray diffraction, X-ray fluorescence, scanning electron microscopy, elemental, and porosimetry. PC had a total porosity of 67% and specific surface area of 61 m2/g. In order to assess the usefulness of PC as a medium for biological aerated filters (BAF), PC and (commercially available ceramsite) CAC were used to treat wastewater city in two laboratory-scale upflow BAFs. The results showed that the reactor containing PC was more efficient than the reactor containing CAC in terms of total organic carbon (TOC), ammonia nitrogen (NH3-N), and the removal of total nitrogen (TN) and phosphorus (P). This system was found to be more efficient at water temperatures ranging from 20 to 26°C, an air–water (A/W) ratio of 3:1, dissolved oxygen concentration >4.00 mg/L, and hydraulic retention time (HRT) ranging from 0.5 to 7 h. The interconnected porous structure produced for PC was suitable for microbial growth, and primarily protozoan and metazoan organisms were found in the biofilm. Microorganism growth also showed that, under the same submerged culture conditions, the biological mass in PC was significantly higher than in CAC (34.1 and 2.2 mg TN/g, respectively). In this way, PC media can be considered suitable for the use as a medium in novel biological aerated filters for the simultaneous removal of nitrogen and phosphorus.

Methotrexate-conjugated PEGylated dendrimers show differential patterns of deposition and activity in tumour-burdened lymph nodes after intravenous and subcutaneous administration in rats

The current study sought to explore whether the subcutaneous administration of lymph-targeted dendrimers, conjugated with a model chemotherapeutic (methotrexate, MTX), was able to enhance anticancer activity against lymph node metastases. The lymphatic pharmacokinetics and antitumour activity of PEGylated polylysine dendrimers conjugated to MTX [D-MTX(OH)] via a tumour-labile hexapeptide linker was examined in rats and compared to a similar system where MTX was α-carboxyl O-tert-butylated [D-MTX(OtBu)]. The latter has previously been shown to exhibit longer plasma circulation times. D-MTX(OtBu) was well absorbed from the subcutaneous injection site via the lymph, and 3 to 4%/g of the dose was retained by sentinel lymph nodes. In contrast, D-MTX(OH) showed limited absorption from the subcutaneous injection site, but absorption was almost exclusively via the lymph. The retention of D-MTX(OH) by sentinel lymph nodes was also significantly elevated (approximately 30% dose/g). MTX alone was not absorbed into the lymph. All dendrimers displayed lower lymph node targeting after intravenous administration. Despite significant differences in the lymph node retention of D-MTX(OH) and D-MTX(OtBu) after subcutaneous and intravenous administration, the growth of lymph node metastases was similarly inhibited. In contrast, the administration of MTX alone did not significantly reduce lymph node tumour growth. Subcutaneous administration of drug-conjugated dendrimers therefore provides an opportunity to improve drug deposition in downstream tumour-burdened lymph nodes. In this case, however, increased lymph node biodistribution did not correlate well with antitumour activity, possibly suggesting constrained drug release at the site of action.

Versatility of polymethacrylate monoliths for chromatographic purification of biomolecules

Polymethacrylate monoliths, specifically poly(glycidyl methacrylate-co-ethylene dimethacrylate) or poly(GMA-co-EDMA) monoliths, are a new generation of chromatographic supports and are significantly different from conventional particle-based adsorbents, membranes, and other monolithic supports for biomolecule purification. Similar to other monoliths, polymethacrylate monoliths possess large pores which allow convective flow of mobile phase and result in high flow rates at reduced pressure drop, unlike particulate supports. The simplicity of the adsorbent synthesis, pH resistance, and the ease and flexibility of tailoring their pore size to that of the target biomolecule are the key properties which differentiate polymethacrylate monoliths from other monoliths. Polymethacrylate monoliths are endowed with reactive epoxy groups for easy functionalization (with anion-exchange, hydrophobic, and affinity ligands) and high ligand retention. In this review, the structure and performance of polymethacrylate monoliths for chromatographic purification of biomolecules are evaluated and compared to those of other supports. The development and use of polymethacrylate monoliths for research applications have grown rapidly in recent times and have enabled the achievement of high through-put biomolecule purification on semi-preparative and preparative scales.

Preparation of macroporous methacrylate monolithic material with convective flow properties for bioseparation : Investigating the kinetics of pore formation and hydrodynamic performance

The preparation of macroporous methacrylate monolithic material with controlled pore structures can be carried out in an unstirred mould through careful and precise control of the polymerisation kinetics and parameters. Contemporary synthesis conditions of methacrylate monolithic polymers are based on existing polymerisation schemes without an in-depth understanding of the dynamics of pore structure and formation. This leads to poor performance in polymer usage thereby affecting final product recovery and purity, retention time, productivity and process economics. The unique porosity of methacrylate monolithic polymer which propels its usage in many industrial applications can be controlled easily during its preparation. Control of the kinetics of the overall process through changes in reaction time, temperature and overall composition such as cross-linker and initiator contents allow the fine tuning of the macroporous structure and provide an understanding of the mechanism of pore formation within the unstirred mould. The significant effect of temperature of the reaction kinetics serves as an effectual means to control and optimise the pore structure and allows the preparation of polymers with different pore size distributions from the same composition of the polymerisation mixture. Increasing the concentration of the cross-linking monomer affects the composition of the final monoliths and also decreases the average pore size as a result of pre-mature formation of highly cross-linked globules with a reduced propensity to coalesce. The choice and concentration of porogen solvent is also imperative. Different porogens and porogen mixtures present different pore structure output. Example, larger pores are obtained in a poor solvent due to early phase separation.

The suitability of DEAE-Cl active groups on customized poly(GMA-co-EDMA) continuous stationary phase for fast enzyme-free isolation of plasmid DNA

The creation of a commercially viable and a large-scale purification process for plasmid DNA (pDNA) production requires a whole-systems continuous or semi-continuous purification strategy employing optimised stationary adsorption phase(s) without the use of expensive and toxic chemicals, avian/bovine-derived enzymes and several built-in unit processes, thus affecting overall plasmid recovery, processing time and economics. Continuous stationary phases are known to offer fast separation due to their large pore diameter making large molecule pDNA easily accessible with limited mass transfer resistance even at high flow rates. A monolithic stationary sorbent was synthesised via free radical liquid porogenic polymerisation of ethylene glycol dimethacrylate (EDMA) and glycidyl methacrylate (GMA) with surface and pore characteristics tailored specifically for plasmid binding, retention and elution. The polymer was functionalised with an amine active group for anion-exchange purification of pDNA from cleared lysate obtained from E. coli DH5α-pUC19 pellets in RNase/protease-free process. Characterization of the resin showed a unique porous material with 70% of the pores sizes above 300 nm. The final product isolated from anion-exchange purification in only 5 min was pure and homogenous supercoiled pDNA with no gDNA, RNA and protein contamination as confirmed with DNA electrophoresis, restriction analysis and SDS page. The resin showed a maximum binding capacity of 15.2 mg/mL and this capacity persisted after several applications of the resin. This technique is cGMP compatible and commercially viable for rapid isolation of pDNA.

Towards the design of a scalable and commercially viable technique for plasmid purification using a methacrylate monolithic stationary phase

A monolithic stationary phase was prepared via free radical co-polymerization of ethylene glycol dimethacrylate (EDMA) and glycidyl methacrylate (GMA) with pore diameter tailored specifically for plasmid binding, retention and elution. The polymer was functionalized. with 2-chloro-N,N-diethylethylamine hydrochloride (DEAE-Cl) for anion-exchange purification of plasmid DNA (pDNA) from clarified lysate obtained from E. coli DH5α-pUC19 culture in a ribonuclease/ protease-free environment. Characterization of the monolithic resin showed a porous material, with 68% of the pores existing in the matrix having diameters above 300 nm. The final product isolated from a single-stage 5 min anion-exchange purification was a pure and homogeneous supercoiled (SC) pDNA with no gDNA, RNA and protein contamination as confirmed by ethidium bromide agarose gel electrophoresis (EtBr-AGE), enzyme restriction analysis and sodium dodecyl sulfate-polyacrylamide gel electrophoresis. This non-toxic technique is cGMP compatible and highly scalable for production of pDNA on a commercial level.

Exploring variation in measurement as a foundation for statistical thinking in the elementary school

This study was based on the premise that variation is the foundation of statistics and statistical investigations. The study followed the development of fourth-grade students' understanding of variation through participation in a sequence of two lessons based on measurement. In the first lesson all students measured the arm span of one student, revealing pathways students follow in developing understanding of variation and linear measurement (related to research question 1). In the second lesson each student's arm span was measured once, introducing a different aspect of variation for students to observe and contrast. From this second lesson, students' development of the ability to compare their representations for the two scenarios and explain differences in terms of variation was explored (research question 2). Students' documentation, in both workbook and software formats, enabled us to monitor their engagement and identify their increasing appreciation of the need to observe, represent, and contrast the variation in the data. Following the lessons, a written student assessment was used for judging retention of understanding of variation developed through the lessons and the degree of transfer of understanding to a different scenario (research question 3).

The history, content and evolution of The International Journal of the First Year in Higher Education

The International Journal of the First Year in Higher Education (Int J FYHE) began in 2010 with a specific FYHE focus and has published two issues per year with one issue linked to The International First Year in Higher Education Conference (FYHE Conference). This issue—Volume 6, Issue 1—is the last under this title. In 2015 the Journal will align to a new conference that has a broader focus on Students, Transitions, Achievement, Retention and Success (STARS). At this significant point and before we move on to the new journal, the journal team felt it was appropriate that the Feature in this final issue of the Int J FYHE should summarise the Journal’s activity over the years from 2010 to 2014.