Determinação de adenosina deaminase, fator de necrose tumoral-alfa e interleucina-1 em gestantes portadoras de pré-eclâmpsia

Preeclampsia is a specific disorder of pregnancy, characterized by arterial hypertension and proteinuria detected after 20 weeks of gestation. This pathology is associated with hyperuricemia, higher levels of pro-inflammatory cytokines, enhanced leukocyte activation and oxidative stress. Adenosine deaminase (ADA) is an enzyme present in all human tissues and, it is involved with the maturation of the immune system. Although its function is not fully understood, ADA is considered an indicator of cellular inflammation and, its increased serum concentration is observed in inflammatory diseases, such as tuberculosis and rheumatoid arthritis. This study aimed to assess serum ADA levels in preeclamptic patients (PE) compared with normotensive pregnant (NT) and non-pregnant women (NP), and to correlate these values with TNF-α and IL-1β production. Ninety pregnant women were included: 60 were pre-eclamptic and 30 were normotensive matched for gestational age. As control group 20 healthy non-pregnant women matched with pregnant for age were included. Peripheral blood mononuclear cells (PMMC) obtained from the three groups studied were cultured with or without lipopolysaccharide (LPS) for 18h at 37oC, and TNF-α and IL-1β production was assessed in the supernatant of cultures by enzyme immunoassay (ELISA). ADA plasmatic concentration was determined by colorimetric method. The results show that ADA plasma levels were significantly higher in PE group compared with NT and NP groups. A positive correlation between ADA and uric acid levels was detected in preeclamptic women. There was no significant difference in relation to ADA levels when PE patients were classified in early and late-onset PE. The endogenous production of IL-1β and TNF-α by PBMC was significantly higher in PE group than in NT and NP women, showing the activation state of these cells in PE. LPS induced...(Complete abstract click electronic access below)

Efeito da silibinina sobre o fator de transcrição nuclear-kB e produção de citocinas inflamatórias por células mononucleares de gestantes portadoras de pré-eclâmpsia

Pre-eclampsia (PE) is a complication of human pregnancy characterized by hypertension and proteinuria after 20 weeks of gestation. Its incidence varies from 5% to 7% of pregnancies and is a major cause of morbidity and maternal and fetal mortality. This is a multisystemic disease, with focus on vascular dysfunction and is closely related to the exacerbated activation of the immune system. In addition to increased activation of monocytes and granulocytes, there is an elevated production of proinflammatory cytokines in pregnant women with PE. The nuclear transcription factor-kB (NF-kB) is present in the cells of the immune system and is responsible for transcription of genes related to inflammation. Whereas the PE is associated with intense inflammatory response, the use of substances modulating the activity of NF-kB factor could be useful in alleviating the inflammation present in these patients. Silibinin is the main component of silymarin, a polyphenolic extract obtained from fruits and seeds of Sylibum marianum with potent hepatoprotective, anti-inflammatory and anti-fibrotic activities. The silibinin mechanism of action includes the ability to inhibit NF-kB activation and, consequently, its migration to the nucleus. The objective of this study was to assess whether silibinin modulates the activity of NF-kB and the production of inflammatory cytokines in mononuclear cells of patients with PE. We evaluated 34 pregnant women with PE, 20 normotensive pregnant women (GN) and 15 non-pregnant women (NG). Peripheral blood mononuclear cells (PBMC) were obtained from those groups of women and cultured in the presence or absence of silibinin (5 uM or 50 uM) and stimulated or not with lipopolysaccharide (LPS) for 18 h to obtain supernatant for determination of tumor necrosis factor-alpha (TNF-α) and interleukin-1 (IL-1β) by enzyme immunoassay (ELISA). The cells were...(Complete abstract click electronic access below)

A comunicação interna como fator de inovação nas Micro e Pequenas Empresas

The work presents a literature review on the topic of internal communication as an innovation factor in Micro and Small Business. The objective is to discuss how internal communication can be an essential factor in the pursuit of innovation and the consequent competitive advantage in the Micro and Small Enterprises scenario. We present the concepts of integrated communication, organizational communication, internal communication, whether crafted by a philosophy of Public Relations, can lead these companies to gain competitive advantage and overcome the limitations and challenges imposed on them

Fator de condição e biologia alimentar de Pimelodus maculatus em três pontos do Rio Piracicaba (SP)

A number of 170 individuals of the species Pimelodus maculatus, a Neotropical fish known as mandi was collected in three distinct locations of the Piracicaba river (Piracicaba, Santa Maria da Serra and Americana – SP0 from April 2009 to February 2010. A common species of catfish whose individuals exist in many neotropical basins was observed to get more information about a possible influence of the water conditions in distant parts of a same river to its condition and also to verify whether the stomach contents of fish collected in these distinct places may distinguish as a possible consequence of food availability. The species were studied by collecting biological data such as standard length (SL) in cm, their total weights (TW ) in grams and sexes to see the composition of fish present in the samples. Length-weight relationships are important means to investigate facts related to the condition of the species in these systems. The analysis was made by using covariance to observe if individuals of similar lengths collected in distinct places may be compared to this purpose. Usual methods to investigate relationships of stomach food contents were applied. By analyzing the condition factor, one may conclude that the mandis collected in the region of Santa Maria da Serra presented similar characteristics to those obtained in Piracicaba, but they differ in this aspect for individuals collected in Americana. This fact is not conclusive about the reasons of this situation, but it may be a first step to other studies in order to get more information about. The degree of stomach repletion may be a first approach to this possible explanation, as individuals of Piracicaba presented usually full stomachs and differed in this way to individuals collected in the two other places

Desenvolvimento e validação de método bioanalítico por difusão em ágar para determinação da potência do fenticonazol creme vaginal

O nitrato de fenticonazol é um derivado imidazólico de amplo espectro de ação contra patógenos dermatófitos, como Malassezia furfur e leveduras, a principal delas Candida albicans. É necessário que se possa garantir a qualidade dos medicamentos produzidos. O controle de qualidade é uma ferramenta que assegura a qualidade, eficácia e segurança desses produtos até o momento de sua utilização e faz-se necessário que métodos analíticos sejam desenvolvidos e validados para o doseamento desses fármacos. A grande importância dos métodos microbiológicos utilizados no controle de qualidade de fármacos com atividade antimicrobiana é demonstrar sua atividade biológica por meio de seu efeito inibitório no crescimento de micro-organismo. A diminuição da atividade antimicrobiana ou potência pode indicar alguma alteração sutil na molécula, que é pouco detectável em um método analítico físico-químico. O objetivo deste trabalho foi desenvolver e validar o método microbiológico difusão em ágar para o produto nitrato de fenticonazol creme vaginal. O método de difusão em ágar foi desenvolvido utilizando meio de cultura ágar Sabouraud e cepa de Candida albicans ATCC 64548 como micro-organismo teste. Para o ensaio foi utilizado o delineamento 3 x 3, conforme preconiza a Farmacopeia Brasileira (2010). A validação do método proposto demonstrou linearidade entre os diâmetros dos halos de inibição e o logaritmo da concentração na faixa de 50,0 a 200,0 μg/mL. O método obteve resultados precisos e lineares com r2=1. A exatidão foi comprovada pelo intervalo de tolerância de 98,83%, dentro dos limites permitidos. O método foi validado de maneira satisfatória, podendo ser utilizado em análises do Controle de Qualidade deste fármaco.

Amplificador de potência para baixa frequência

In this work we report the development of a tube amplifier built to be used in magnetic probe diagnostic of plasma. The probe is used to measure the magnetic field in the theta-pinch system presently running in our university. We present the calculations and procedures to determine the configuration of circuits and specify the components of the power supply, the preamp stage and the power stage. The circuit configuration and the characteristics of the components was obtained. A representative model of the system behavior gave the transfer function of the amplifier. Theoretical predictions of frequency response and the feedback effects were compared to the experimental values and showed very good agreement. The amplifier works between a frequency bandwidth of 20 an 30 kHz and supply a maximum power of 12 W

Uma revisão sobre a resina uréia-formadeído (RUF) empregada na produção de painéis de madeira reconstituída

According to ABIPA (2009), Brazil is currently among the major producers of reconstituted wood panels, with one of the main factors for this condition, its climate and its large land area, which allows the cultivation of forests, which provide raw materials for these industries. To establish that market as power, Brazil has invested about R$ 1.3 billion in the last 10 years, yet designed an investment of 0.8 billion dollars over the next three years (BNDES, 2008). With the new investments in this segment, we expect a growth of about 66% in the resin consumption of urea-formaldehyde (GPC, 2009) which should also result in major investments by the companies producing this polymer. Currently employees are mainly three types of resins in the production industry panels, as follows: Urea-Formaldehyde Resin (R-UF), melamine-formaldehyde resin (R-MF) and Phenol-Formaldehyde Resin (R-FF). Especially the cost factor, the urea-formaldehyde resin is the most used by companies producing reconstituted wood panels. The UF-R is a polymer obtained by condensation of urea and formaldehyde reactors (usually batch type), characterized by being a thermosetting polymer which makes it very efficient for bonding wood composites. The urea-formaldehyde polymer, to present a quite complex, it becomes very difficult to predict the exact chain resulting in the process of condensation of urea with formaldehyde, so that a greater knowledge of its characteristics and methods for their characterization can result in greater control in industrial processes and subsequent decrease cost and improve the quality of reconstituted wood panels produced in Brazil

Desenvolvimento de um anteprojeto de um sistema de digitalização da proteção e controle aplicada a uma subestação elétrica industrial de alta tensão

The proposed of scanning of an electrical industrial substation HV is associated with a segment of the Electrotechnical area and aims the study and preliminary application of digital technologies in the protection, control, measurement and automation maneuvers aimed at a Industrial Electrical System typical High Voltage. Well intended to supervision, protection and control of major electrical and thermal quantities involved in a substation, such as voltage levels, current, temperature, power factor, loads of transformers and circuit feeders, status of interlocking devices, switching equipment maneuvers, etc

Estudo da utilização do balanced scorecard na gestão da qualidade e excelência operacional aplicadas a projetos de engenharia em sistemas de potência

The expansion of the electrical system is currently a subject of great importance to the development of Brazil. For its realization, large projects are needed, requiring large-scale investment and realization processes of great complexity. Thus, this type of project has a high strategic importance for the performance of companies that conduct. Seeking a way to determine a method to align traditional practices for measuring quality to the corporate strategic needs, this work is the study of the use of the balanced scorecard methodology, applying quality management and operational excellence, with a focus on projects in power systems. We analyzed some cases of successful application of the methodology in business segments in the next study, culminating in a proposed model of the method

Otimização da extração alcalina com peróxido de hidrogênio em seqüência de branqueamento com aplicação de baixo fator kappa

The new market, focused on sustainability and other environmental concerns, refers to innovations that seek alternative forms of production. In pulp and paper bleaching alternative reagents are studied, for example, hydrogen peroxide, in partial substitution of chlorine dioxide in order to reduce the formation of organochlorines. In this context, this study examined the burden of hydrogen peroxide (H2O2) on alkaline extraction stage (stage Ep) required for the bleaching of pulp with eucalyptus kraft pulp, pre-oxygen delignified to obtain equivalent brightness at 90 ± 0.5% ISO, as well as its effect on quality of pulp produced. The pulp was bleached by the sequence D(Ep)DP, with the application of factor kappa of 0.14 and varying the concentration of hydrogen peroxide in Ep stage three, five, seven and nine kilograms of reagent per ton of pulp absolutely drought. The final P stage was optimized with the use of six, nine and twelve pounds of hydrogen peroxide per ton of absolutely dry pulp to achieve the required brightness. The quality of the pulp produced was analyzed based on the kappa number, the brightness and the viscosity. The methods were performed according to standards set by the standard TAPPI (Technical Association of the Pulp and Paper Industry). The best result was obtained using the following D0Ep(7)D1P(6), which showed a viscosity of 19.9 cP, 89.6% ISO brightness, consumption of 94.9 kg / t of reagents and reagent costs of US$ 28.15, because it showed better pulp quality for a lower cost compared to the others. It was found that the greater the amount of hydrogen peroxide in alkaline extraction, the lower the kappa number and increased the amount of residual hydrogen peroxide. The higher the charge of hydrogen peroxide in Ep stage, the lower the need for hydrogen peroxide in the final P stage, reducing the cost of bleaching

Efeito do exercício prévio na determinação da potência crítica

The objective of this study was to analyze the influence of previous exercise on the determination of critical power (CP). Seven apparently healthy nontrained males, of 18 to 25 years, participated of this study. The subjects were submitted, in different days to the following protocols in a cyclergometer: 1) one progressive test until voluntary exhaustion for the determination of lactate threshold (LL), maximal oxygen uptake (VO2max) and its corresponding intensity (IVO2max); 2) six constant workload tests at 95,100 and 110% IVO2max until exhaustion with and without a previous exercise at 70% , in random order. The exhaustion times (tlim) at 95, 100 and 110% IVO2max were adjusted forme thress models of two parameters to estimate CP and anaerobic work capacity (AWC) [P=CTAn/tlim)+CP; tlim = CTAn/(P-PC); P=PC.tlim+ CTAn]. The model with the lowest standard error was considered for the estimation of CP. The tlim at 95% IVO2max was similar without (501 ± 140 s) and with previous exercise (473 ± 99 s). However, the tlim at 100% (381 ± 103 s and 334 ± 101 s) and 110% IVO2max (267 ± 163 s and 227 ± 68 s) was significantly longer with previous exercise. There was no significant difference in CP and AWCat conditions without (200 ± 27 W and 23 ± 11 kJ, respectively) and with previous exercise (212 ± 30 W and 18 ± 8 kJ, respectively). It can be concluded that the parameters of the relationship between power and time were not modified by the previous severe exercise

Uma análise da eficiência de uma transmissão CVT

This undergraduate thesis evaluates the effects of temperature variation of the air inside the CVT gearbox on the performance of a Continuously Variable Transmission (CVT). The CVT used in the tests was manufactured by Gaged Engineering (GX9 model) and is currently used in a Baja prototype. It’s a mechanically operated CVT, which the movement of the pulley plates varies according to the drive shaft rotation, shifting the belt along the diameter, and varying the transmission ratio. The purpose of this work is to analyze the change in the slip factor, coefficient that compares the variation between the actual transmission ratio and the ratio of geometric transmission, and its correlation with the power variation. A test bench was built and some tests were performed, indicating that was possible to achieve output power ratios of 1.75 [ℎ

Transmissão de potência em corrente contínua e em corrente alternada: estudo comparativo

This paper presents a comparative study based on literature and examples in the literature, the two main technologies for the transmission of electricity at high voltage: alternate current transmission and direct current transmission. Inside the direct current transmission will be shown two technologies currently employed, transmission by current source and transmission by voltage source, contributing to a better understanding of them. The ultimate goal is to provide a text for consultation to identify key characteristics that influence the choice of future transmission lines

Estudo da relação entre o fator de início de tradução de eucariotos 5A (eIF5A) e a etapa de elongação da tradução

O fator de início de tradução 5A (eukaryotic translation iniciation factor 5A, eIF5A) é altamente conservado entre arqueas a eucariotos, sendo que as proteínas eIF5A de Saccharomyces cerevisiae e de mamíferos são 63% idênticas. eIF5A sofre uma modificação pós-traducional única na célula, a hipusinação de um resíduo de lisina. Essa proteína já foi relacionada ao início da tradução, transporte nucleocitoplasmático, decaimento de mRNA e proliferação celular, mas a função crítica de eIF5A ainda não foi esclarecida. A depleção deste fator em S. cerevisiae leva a uma diminuição (30%) da taxa de síntese protéica, sugerindo que eIF5A seja um fator envolvido na tradução de um grupo específico de mensageiros. Dados do laboratório demonstram interação física entre eIF5A e proteínas ribossomais bem como com o fator de elongação 2 da tradução (eEF2). A interação com eEF2, sugere que eIF5A atua na etapa de elongação da tradução, ao invés do início da tradução, como proposto inicialmente. Com o objetivo de avaliar a relação de eIF5A com a etapa de elongação, foram realizadas análises de interações genéticas entre o gene codificador de eIF5A (TIF51A) e diversos genes codificadores de proteínas envolvidas na tradução. Através de análises de interações genéticas, foi observado que o mutante estável de eIF5A, tif51AK56A, apresenta um defeito de crescimento quando o mutante de eEF2, eft2H699K, está expresso em alto número de cópias, enquanto que o mutante tif51AQ22H/L93F não apresenta defeitos nesta condição. Foi observado também que o mutante tif51AQ22H/L93F apresenta um defeito de crescimento mais severo quando ocorre superexpressão de EFT2, gene codificador de eEF2. Foi observado ainda que não há complementação alélica entre os mutantes estáveis de eIF5A e que a reversibilidade do fenótipo de sensibilidade a temperatura... (Resumo completo, clicar acesso eletrônico abaixo)

Análise do consumo de energia elétrica e da eficiência energética em uma indústria de processamento de madeira

In the industries of wood processing (sawmills), where timber is sawn in equipment such as band saws, circular saws, trowel, thicknessers, among others, that mechanically transform this resource and use of electric motors, which are not unusually poorly scaled working or overloaded, often a factor that is not found in these industries and has fundamental importance in the production process is energy efficiency that is achieved by both technological innovation and through all the practices and policies that aim to lower energy consumption, lowering energy costs and increasing the amount of energy offered no change in generation. For both during the design of an electrical installation, both overall and in various sectors of the installation, investigations are necessary, considerations and uses of variables and factors that put into practice the theme of energy efficiency. Therefore, in this paper, these factors were calculated and analyzed for a wood processing industry (sawmill) in the municipality of Taquarivaí - SP, namely: active power, power factor, demand factor and load factor. Where they were small in relation to the literature, these events that occur when devices are connected at the same time and due to the conditions of processing the wood, where the engines have large variations in electricity consumption during the unfolding of the same, due to efforts with the load and idle moments between each machining operation in the equipment